Mac mini with locolization Germany

Similar Questions

• How do we install siri on a mac mini with macOS Sierra?

  I have a 2011 mac mini with macOS Sierra installed environment. I know that the mini doesn't have a microphone installed. How do I set up my mini so I use siri? I noticed that when I installed Sierra on my MBP mid-2012, it asked if I wanted to install siri as part of the installation. I selected Yes. It happened when I installed it on my mini, I'm guessing that because there is no microphone on the mini. Thanks in advance.

  You are right. You are prompted to configure Siri during installation only if the computer has a microphone.

  Later, after you add a microphone go to System Preferences > Siri and turn on Siri

• I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that?  Can I use an adapter?  If yes should which adapter I?

  I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that? Any recommendations? Can I use an adapter?  If yes should which adapter I?

  You can use any DVI monitor DVI port directly or have any VGA monitor with the power that you adapter. A HDMI monitor might work with an adapter DVI to HDMI in a pinch, but HDMI tends to be more fickle.

• I need to transfer my OS to iMac with firewire for Mac mini with love at first sight. Don't know what to do.

  Hello I have a 2010 iMac Core i3 3.2 GHz, 8 GB of memory, and El Capitan mid with a firewire 800 port that goes wrong. I just bought a Mac mini refurbished end of 2014 Apple, Core i5, clocked at 2.6 GHz with 8 GB of memory with thunderbolt 2 ports (but unspecified OS, I guess Yosemite 10.10 if Apple put the original on the renovated units OS) I want to use migration assistant to transfer all of the iMac with firewire for the Mac mini with the crush.  Can I use thunderbolt Apple firewire adapter for it? If this is not the case, what can I do? Any help would be greatly appreciated. Thank you for your time.

  Yes, you can.

  (144741)

• Mac Mini with os x Lion, said El Capitan partition Boot Camp Windows 7 has lost

  I have a Mid 2011 Mac Mini with os x Lion as my main OS.  I had installed Windows 7 to be started using Boot Camp.  Everything worked perfectly until I added El Capitan under a new partition.   Now, as soon as the boot, there is no option of Boot Camp; There are only Lion and El Capitan options to begin.  However, BOOTCAMP and Win7 files/folders appear in the Finder.

  After reading similar cases here in the support forums, it seems that this may be repairable.  (fingers crossed)  Oh, and FYI, I'm a total beginner when using in the Terminal environment.

  The output for the Terminal commands are:

  diskutil list

  / dev/disk0

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk0

  1: EFI 209,7 Mo disk0s1

  2: Apple_HFS Macintosh HD 374,7 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS El Capitan 64.2 GB disk0s4

  5: Microsoft database BOOTCAMP 60.2 GB disk0s5

  Cs diskutil list

  No logical volume group CoreStorage found

  sudo TPG - vv - r see the/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 976773167

  start index size summary

  0              1                    PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34             6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 731738416 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  732148056 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  733417592 125421448 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  858839040 262144

  859101184 117671936 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  976773120 15

  976773135 32 table dry GPT

  976773167 1 dry GPT header

  sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-976773167] < unknown ID >

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  Any help to get my rear Boot Camp would be greatly appreciated.

  Thank you.

  After some research around these forums for similar problems (unable to start Bootcamp after installation of El Capitan), I downloaded TestDisk and got the following initial analysis:

  / Dev/disk0 - 500 GB of disk / 465 GiB - 976773168 sectors (RO)

  Current partition structure:

  Start end partition size in sectors

  1 system EFI P 40 409639 409600 [EFI system partitio

  2 p Mac HFS 409640 732148055 731738416 [client]

  3 p Mac Boot 732148056 733417591 1269536 [HD Recovery]

  4 p Mac HFS 733417592 858839039 125421448 [El Capitan]

  ATTENTION: number of cylinder/heads of 255 incompatibilities (NTFS)! = 1 (HD)

  ATTENTION: number of sectors per track of 63 incompatibilities (NTFS)! = 1 (HD)

  P 5 MS Data 859101184 976773119 117671936 [BOOTCAMP]

  Do not know where to go from here.  @Loner T, maybe you could offer an idea?  You seem to be the person of go - to for this problem.  (of course, if anyone else can help, I'd gladly accept it)

  Thank you.

• I buy a new 2015 mac mini with El Capitan.  I currently have a 2013 mac mini with Mountain Lion.  It would benefit me to upgrade my 2013 to El Capitan, before migrating my information to my mac mini to 2015?  Thanks in advance!

  I buy a new 2015 mac mini with El Capitan.  I currently have a 2013 mac mini with Mountain Lion.  It would benefit me to upgrade my 2013 to El Capitan, before migrating my information to my mac mini to 2015?  Thanks in advance!

  Yes, it is better to update the old Mac EC.

  Make sure that you back up the old Mac before the upgrade.

  Note the application of some may require updated to work with CBS. To check see it:

  https://roaringapps.com/apps

  Also, some devices may require updated drivers and for some devices such drivers do not exist.

• How to control a Mac mini with HDMI ports fries and lightning? (The rest is ok)

  Recently, a lightning strike fried video output (HDMI and lightning) ports on my Mac Mini end of 2012. As far as I know, the rest of the machine works fine. It's just blind. I can't have everyone working on this, but I don't want to throw a perfectly (well, almost perfectly) computer works.

  If I can get a control over the Mac Mini for a few days, I could set up as a dedicated time Machine or maybe even an iTunes or media Server. How can I achieve this?

  Configure the screen sharing on the Mac.

  To do this, you must have another recent Mac.

  You can start the problem Mac in target disk mode, connect the two Mac by FireWire or Thunderbolt, boot the Mac problem with button down T, boot the first Mac since the Mac HD problem and sharing Setup screen

  http://www.macissues.com/2014/05/07/how-to-set-up-and-use-screen-sharing-in-OS-x /.

  http://www.TechRadar.com/us/news/computing/Apple/how-to-use-screen-sharing-in-Ma c-os-x-1296285

  Alternatively, you can take the drive out of the Mac problem and start another Mac that and configure sharing screen.

  You can also get a USB video card and put in place by the target disk mode or by removing the similar disk for screen sharing

• A Mac Mini with these specs to run the latest version of Garage Band?

  Hi, I am planning to buy a Mac Mini opportunity. He's probably an outdated version of Garage Band, so I was wondering if she could handle the latest version with these specs:

  Processor: 1, Intel core 2 duo 88GHz

  Memory: 1 Gb 667 Mhz ddr2 sdram

  No it can't do in its current state.

  the latest version of Go need 10.11 and you don't have enough RAM to run the latest 3 versions of Mac OS X (10.11 only is available if you don't already have the other btw)

  update your RAM

  upgrade the operating system

  GB upgrade

• make a call on a Mac Mini with an iPhone.

  I have a Mac Mini connected to an HDTV via HDMI.  I have the sound value of output for HDTV.  Everything works until I make or receive a call from my iPhone to my Mac Mini.  Even with the release of his affecting HDTV sound when the call is coming through the internal speakers of the Mac Mini.  Why is this?  If I hooked computer external speaker would that help, or all the sounds go to the speakers and not the TV speakers.  I would like the phone call to go through HDMI on TV and hear phone call from TV, like all the rest.  I went into settings and set the audio output on the HDTV that is connect via HDMI, but just the noise from phone call will the internal speaker on the Mac Mini.  Any thoughts?

  In FaceTime > video what output is selected?

• Do I need a Mac Mini with high-specs to efficiently program an Iphone app?

  Hello world!

  I currently have a PC and am on a budget.

  What I want to do however, is program/create an iphone app and came to the conclusion that the hanging of a mac mini to my pc is the most cost-effective way to do.

  However, I'm not sure what level of specification is necessary for programming the OS. I've never programmed before, so have a very limited knowledge.

  Could I get smooth with a more/less expensive model on 2 GB of ram? Or I will require probably one with superior specs?

  The app is a bit complex.

  Thanks a lot if you take the time to answer

  Sincerely,

  Tommy

  I use a Mac mini (end 2012) with the latest version of El Capitan and feel no bottlenecks.

  My advice would be to buy as much built-in RAM as you can afford (16 GB + if possible), rather than worry about the speed of the processor.

• Cloning of a Mac mini with application Server

  We bought a condo in Florida and I want to my server it doubles. I use Mac mini (2 different models) with 2 drives external (one for Time Machine backups) and one for data.

  What is the best way to install the Apple Server on Florida related to the Mac mini so I don't have to install it from scratch?

  Yesterday I tried (in vain) to use the Migration Wizard to move all of my Mac mini to the Florida-bound one. Can I use 3rd party app "Carbon Copy Cloner" instead?

  Any recommendations on how to configure the 2nd server would be appreciated.

  The replication server is a relatively trivial process and can be accomplished by using disk utility.  However, the source drive and the destination drive should not be active at the time of cloning.  For example, you have Master Mini and you want to be replicated on Mini replica.  The best way to do it with the included tools must start Master Mini from another disk that contains an operating system to start.  Then start the Mini replica in target disk mode and connect it to the Mini Master (already started from another drive).  Disk utility to clone the Master disk on the drive of replica.

  Ah, but cloning is the easy part.  The question I have for you is that you really want an exact replica?  The reason why I ask, is that your current server should have a name and a fully qualified domain name.  It's server.pauljohnson.com and it has a 10.0.0.10 IP address.  If you clone the device to another Mac, there will also be a name of server.pauljohnson.com and it has a 10.0.0.10 IP.  If two of your networks are configured on the 10.0.0.0/24 subnet then you won't be able to connect to each other.  Similarly, if you depend on external access to devices and must comply with DNS, then you can only point to one of the servers, unless you have a form of installation program to distribute the load between the two locations of load balancing.

  What services run you on the servers other than the Server Time Machine?  Do you intend to have a VPN tunnel between the two institutions?  If you use Open Directory, and DNS, you can configure master and replicas of the two services.  Of course, this should only be done with a tunnel VPN in place I would not recommend exposing these services to the internet.

  Then await you replicate data also?

  Start with a list of services and a list of expectations about how you want client machines work when moving from one place to another.

  Reid

  Apple Consultants Network

  Author - "El Capitan Server - Foundation Services.

  Author - "El Capitan Server - Collaboration & control»

  Author - "El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store

• My Mac Mini with 500 GB disk hard but shows only 276 available.

  I think that is is split using Bootcamp when I bought to load programs such as Word and Excel PC... I think there may be half the player I do not use. But it only shows the "Windows partition where you are supposed to choose the section you want. Where is the rest of the disc? Thank you

  You're not being very clear, but...

  Launch utility disk from the Applications > Utilities folder. It will show you how your disk is partitioned.

  If you want to see how your disk space is being used, select about this Mac from the Apple menu, then click the storage tab.

• Mac mini with Photoshop CS2 installed.

  question? :

  No one knows about it: I want to move to CS6 in CS2. I also have to upgrade to Yosemite OS X... should I upgrade the operating system first, and then do the CS6 or do I have to have the CS6 on my computer first, and then upgrade the operating system

  Yes! update the operating system first.

• What Mac Mini for use with Adobe CC?

  Hello

  I thought about getting a Mac Mini to use with a Wacom Cintiq Display(either 22HD or 27QHD) and I was wondering what would be best for the execution of the Adobe programs.

  It seems that most of the people prefer the 2012 Mac mini with the quad core as opposed to the current gen using two hearts.

  This brings me to two questions:

  I see a huge difference between the quad core and dual core in the adobe programs?

  8 GB RAM is enough or should I opt for 16 GB?

  Otherwise, the mac mini may be a poor choice for what I would do, so any feedback is appreciated!

  Thank you!

  What Adobe suggest to their CC minimum specifications in OS X, it

  should not be necessary to buy a quad-core (they say that it would use all the cores).

  A set of Photoshop CC system requirements suggest higher specs than one

  Another help page for Adobe. This page shows the highest specifications, but can

  not reflect the version that you are considering:

  •Photoshop CC 2015.x system requirements and languages

  https://helpx.Adobe.com/Photoshop/system-requirements.html

  If for some reason you happen across a 2012 end i7 2.3 or 2.6 GHz quad with

  two 1 TB hard drives, they would be more easily upgraded to run an SSD and

  keep a rotating disc; or install two SSDs. between that and 16 GB of RAM, these

  should do a quick little computer. Rotational hard drives are the bottleneck.

  But probably not necessary for Adobe photoshop CC. The graphics processor

  is a limitation if you use intense graphic applications. GPU shares

  standard memory with the system; From memory, there is little or no dedicated graphics.

  Although I have a Late 2012 Mac Mini i7 2.3 GHz quad-core (server) with double 1 TB

  5400 RPM hard drive and RAM upgraded to 16 GB total rotation. It can

  Use at least one drive upgraded to 7200 rpm or SSD drive more efficient.

  The Mac Mini which is online store (check to see if there is an official refurb)

  in the middle to upper technical version may be OK. The top level because of the upgrade

  options in the configuration page (select to buy it, then see what options exist)

  might be OK. The lower spec Mini doesn't seem to be viable for serious users.

  New versions available now, because, you choose the configuration when

  you order the computer: you buy an upgrade level you think you might need.

  Memory is affixed, then exercise your ESP skills to look ahead, before buying.

  The new Mac Mini 'top model' has better graphics than model end 2012.

  An advantage for the Mini is you can choose monitors, peripherals, etc. An old

  new stock Mini would have some OS X who was active as a base level.

  Since none of these units have a system backup media. Is online recovery there.

  My Mini comes with the Mavericks 10.9; 10.9.5 functioning properly. Partitioned,

  the discs could dualboot mulitple systems and their applications more recent specifications.

  (You can pay like nine awards for the end of 2012 Mini i7 quad, used clean-shaped).

  I had considered to be a non - retina MacBook Pro 13 inch 2.5 GHz for once.

  It was the time when they were more common in the 'special offers' Apple

  refurb store page online at decent price; then buy RAM upgrade later.

  In any case, this has become a long rant a few detours or details were

  omitted for the sake of clear path back to the main topic. Since I was late

  2012, mac Mini and it's more of the half upgraded for most all that he can do

  I would probably say try a. If you can find a new one at a fair cost.

  If the cost is too high, you can get a new Mac Mini to higher specification

  the Apple Store. They are dual-core. Adobe applications do not seem to need

  the advantage of the use of quad-core processors or. (these run virtual cores, too;)

  so if you have the appropriate application, the quad core turn eight - virtual.)

  The option AppleCare extended warranty covers to buy new equipment.

  It would have supplied with El Capitan, if the current new stock. This fall, there may be macOS

  Sierra - if you happen to get that stock again - at the end of the year. Not sure

  If or when the hardware upgrade version configurations may appear.

  Anyway, it's more a kind of letter. Sorry about that...!

• CP1025nw with the new Mac Mini 10.8.4

  Hello world

  I bought a cp1025nw and a new mac mini with 10.8.4 a few weeks ago, I have problems with the implementation of wireless printing:

  1. as the mac mini is a novelty, it doesn't have the previous version of the printer driver installed, thats why the mac is not able to detect the update to the app store automatically;

  2. the installation disc comes with the printer only is not supported with 10.8.4.

  3. I tried to set up the printer using my old macbook air with 10.5.8, the most up-to-date printer driver is downloaded from the app store and successful installed in my macbook air, however, the printer could not find my network wifi during installation, it shows that:

  ' - Wireless Network Name: ""(Nothing in parentheses).

  and

  -Mode communication: infrastructure

  4. the printer self test report shows that the IP add of the network is 0.0.0.0 in the network information section, but there is a valid IP address Add (192.168.223.1) in the section of direct printing configuration.

  5. the printer works fine with usb connected;

  6. have you consulted with the people from Apple and HP on the phone, the apple people asked me to consult the HP people, then the people of HP asked me to set up the printer with an older version of Mac OS x (which I did), so that I can get the IP add after installation, and then configure the printer with the IP add on my new mac mini , but of course I couldn't get the IP add with what they said.

  7. I downloaded the printer driver more up-to-date on apple store (version 2.14) for my mini mac, the file works fine as I can open the file (unlike the configuration of HP disc invites the message: "your OSX is too new and not is not supported bla bla bla...) »).  However, there is nowhere where I can put in place the printer during installation, the file just happens by itself, installation, then telling me 'your installation is complete.', I dun even have the option of entry or to do any installation during the process;

  8. I am unable to connect the printer to my router because my router is provided by my owner and which is located under the sink in the kitchen =. = »

  9. I went through all the related topics posted here, I tried as much as I can displayed by other users, but always without success.

  The printer driver CP1025nw "drives me crazy", please help!

  Thank you very much!

  Kristin

  Hi Kris,

  Please, try the following steps and let me know if this is useful:

  1. Temporarily connect the pritner to your Mac 10.8 with a Ethernet cable.
  2. Open Safari and click the bookmarks (the icon representing a tiny book in the top menu right.
  3. Click on Hello.
     Note: If the Hello is not listed, click the Safari menu and select Preferences. Mark Hello in the Collections section.
  4. Double-click the listed CP1025 printer.
  5. Click the network tab, and then select Wireless Network Configuration.
  6. Select the wireless option, and then select join an existing wireless network.
  7. Select your SSID.
  8. Set the mode of security required and enter your security key.
     Note: you can check your security type by clicking on the icon of the Wi - Fi connection and select Network Preferences. Click Advanced in the section Wi - Fi and the type of security will be displayed for your network WEP or WPA.
  9. Click on apply, unplug the ethernet cable and allow two to three minutes, until the blue wireless light will turn blue, then click on the Plus sign under Print & Scan and the printer should be