Mac Pro 2.1 overheating

Similar Questions

• Mac Pro keeps stopping, lightweight CPU a / b overtemp on

  I bought a used Apple Mac Pro 2.1 in December.  I use it mainly for editing my photos on Adobe PS, using filter of camera RAW.  The unit never gave me any problems, until early last week.  Here are the specs:

  | 8-CORE 3.0Ghz (2 x Quad-Core)

  | 32 GB OF RAM

  | 250 GB SSD

  | V RAM OF 4 GB GTX-680

  | Double BONE - El Capitan (primary) and Yosemite on two separate boot disks.

  All started early last week, with an error screen when I open an CR2 on Adobe PS file.  I got this message...

  "Camera Raw has temporarily disabled acceleration graphics processor because of the error." Update your graphics card driver may solve the problem. "Choose the option 'Use the graphics processor' in the dialog box Camera Raw prefer to re - enable GPU support.

  In 5 minutes, I when preferences and choose 'use the graphics processor', then continued my work.  Subsequently, the Mac suddenly stops without any warning whatsoever! No message, no noise from the tower itself, the power light remained.  I then turned off the power.  I waited for a minute and he went back on.  The password screen, it would be closed again.

  I then let the rest of the machine for 30-45 minutes, removed any buildup of dust inside using compressed air and turned on the unit return to perform minor troubleshooting. as well as other "light work" to avoid an overload of the system... He will stop in 35 minutes to turn on the machine.

  Still, I unplugged everything (including the power cord) to reinstall the two riser cards. I powered the Mac with the access panel open, to keep an eye on something unusual.  All fans are smooth running, no sign of problems.  Until I updated the driver (Nvidia Cuda) GPU, the machine will stop again in 10 minutes!  Frustrated, I opened the side panel to only discover, both red lights (CPU A / B) on the section of the overheating of the logic board.  After the recharge time, I restarted the MAC and ran a tempature monitor I have installed.  I noticed the radiator of the Northbridge turned very quickly when I was running Adobe PS, please refer to the picture I have attached.

  

  I have no idea what to do next.  I'm not sure if I need a replacement PSU, or something else entirely.  Pointers, help and/or advice.  I greatly appreciate it!

  Matt

  Run Apple Hardware test

  Using Apple Hardware Test - Apple Support

  If you do not have the original installation disc with AHT you can download it here and make a bootable USB or optical disc

  https://github.com/upekkha/AppleHardwareTest

  https://gist.github.com/drewreece/2e5eed7dbfbd5dd7e929

  Note that you need to download the specific to your model of Mac AHT.

• MacBook Pro 15 '' (2015) overheating "

  Hello, I have looked through all of the messages on MacBook overheating in this forum, tried almost every step, battery, saving of the SMC fan control mode, but looks like nothing helped. My macbook pro 15 "is overheating a lot, sometimes when I'm only using Photoshop for an easy photo editing - it can sometimes go up to 60 ° C, is crazy. I already tried to contact my service and brought my laptop for them. The only thing they have said after a two week wait has been "we have tested the laptop heavily and looked into it, but everything was very good." then I got home, open photoshop to check that in, the laptop came out so hot so fast. You guys have some tips? The MacBook is not yet 1 year old, I use it for graphic design and I don't want to work with a hot laptop everytime I open 1 software. Thank you guys

  How much is 60 ° C? If it's the outside of the envelope, which would be bad. But for the computer components is peanuts: they can easily handle 100 ° C. Mine are almost always in the range 50-70 ° C (in lid closed mode!), which is quite normal. It is simply the price to pay when stuff you as much electronics in a very slim case, as does Apple.

  BTW: If your MacBook is really overheating, it turns off automatically.

  Mac Laptops: Apple Support operating temperature:

• Mac Pro turns off and restarts

  I have a Mac Pro 5.1.  I recently installed a USB 3 card with Esata OWC.  Occasionally, the system will restart now.  Usually when I use DaVinci Resolve.  My CPU is not overheating. I have too much on the PCI bus?  It doesn't happen when I take out the card.  Here is the crash report.

  I have a GTX 970 installed with drivers from the web. (I already had an installed 570 and had the same problem)

  I have a card from Blackmagic with SDI IO.

  I have a concert PCI 480 OWC storage.

  Thank you!

  Crash report *.

  Anonymous UUID:

  DF1900A6-AF49-B25B-F9F2-88B76B27064B

  SAM 7 May 20:10:24 2016

  Panic report *.

  panic (cpu 4 0xffffff80153ce40a appellant): Kernel trap at 0xffffff7f95b1f02e, type 14 = page fault, registers:

  CR0: 0 X 0000000080010033, CR2: 0 X 0000000000000118, CR3: 0X000000064F043061 CR4: 0X00000000000226E0

  RAX: 0X0001102DB7BBD3E9, RBX: 0 X 0000000000000000, RCX: 0X000000004CFE13E4 RDX: 0 X 0000000000011029

  RER: 0XFFFFFF92E1E230D0, RBP: 0XFFFFFF92E1E230D0, IHR: 0X0001102DB7BBD3E9, RDI: 0 X 0000000000000000

  R8: 0 X 0000000000000000, R9: 0 X 0000000000000000 R10: 0XFFFFFF8015A17278 R11: 0XFFFFFF80158B57E0

  R12: 0XFFFFFF80417DC460, R13: 0XFFFFFF80440E8C60, R14: 0XFFFFFF80417DC400 R15: 0XFFFFFF80440E8C60

  RFL: 0 X 0000000000010286, RIP: 0XFFFFFF7F95B1F02E, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

  Lack of CR2: 0 x 0000000000000118, error code: 0 x 0000000000000000, CPU error: 0 x 4, PL: 0

  Backtrace (4 CPU), Frame: Return address

  0xffffff92e1e22d60: 0xffffff80152dab12

  0xffffff92e1e22de0: 0xffffff80153ce40a

  0xffffff92e1e22fc0: 0xffffff80153ec273

  0xffffff92e1e22fe0: 0xffffff7f95b1f02e

  0xffffff92e1e230d0: 0xffffff7f95b1f54c

  0xffffff92e1e23110: 0xffffff7f95b99267

  0xffffff92e1e23130: 0xffffff7f95b1df90

  0xffffff92e1e23170: 0xffffff7f95aed8dc

  0xffffff92e1e231d0: 0xffffff7f95aedd59

  0xffffff92e1e23200: 0xffffff7f9803b461

  0xffffff92e1e23280: 0xffffff7f9803a7f5

  0xffffff92e1e232e0: 0xffffff7f95a50b0b

  0xffffff92e1e23330: 0xffffff7f95a532c4

  0xffffff92e1e23390: 0xffffff7f95a58d7e

  0xffffff92e1e23460: 0xffffff80155392e8

  0xffffff92e1e234c0: 0xffffff80154deed8

  0xffffff92e1e23610: 0xffffff80154ebea1

  0xffffff92e1e237a0: 0xffffff80154eab39

  0xffffff92e1e23870: 0xffffff80154f012d

  0xffffff92e1e238e0: 0xffffff80154ee19e

  0xffffff92e1e23a80: 0xffffff80154e94c2

  0xffffff92e1e23d20: 0xffffff801571105c

  0xffffff92e1e23db0: 0xffffff801551b4d0

  0xffffff92e1e23e60: 0xffffff80157c64aa

  0xffffff92e1e23f00: 0xffffff80157c661e

  0xffffff92e1e23f60: 0xffffff8015827fa1

  0xffffff92e1e23fb0: 0xffffff80153eca76

  	Extensions of core in backtrace:
  	com.apple.iokit.IOStorageFamily (2.1) [DC1AAB7C-F417-3238-BB3F-2A5B84D67B90] @0xfff fff7f95a4c000-> 0xffffff7f95a72fff
  	com.apple.iokit.IOSCSIArchitectureModelFamily (3.7.7) [2F5D538F9]@0xffffff7f95ae9000-07D953DC-7B94-3AE8-A379-2 b 0 > 0xffffff7f95b13fff
  	com.apple.iokit.IOSCSIParallelFamily (3.0) [7C94C05D-4761-3D03-AB56-4CB7FCFA6039] @ 0xffffff7f95b1a000-> 0xffffff7f95b2bfff
  	dependency: com.apple.iokit.IOSCSIArchitectureModelFamily (3.7.7) [02F5D538F9]@0xffffff7f95ae9000 07D953DC - 7 B 94-3AE8-A379-2 b
  	com.newer - Tech.kext.mxpciel2esu3_usb (1.2) [95CD2269-3472-3679-A968-ACD2F24F8103] @ 0xffffff7f95b79000-> 0xffffff7f95badfff
  	dependency: com.apple.iokit.IOSCSIParallelFamily (3.0.0) [7C94C05D-4761-3 D 03 - AB56 - 4CB7FCFA603 9]@0xffffff7f95b1a000
  	dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f95b2c000 0xffffff
  	com.apple.iokit.IOSCSIBlockCommandsDevice (3.7.7) [CFF0A65E-BE53-3509-9 d 73 - DDFB57A 52F04]@0xffffff7f98039000-> 0xffffff7f9804ffff]
  	dependency: ffff7f95a4c000 @0xff com.apple.iokit.IOStorageFamily (2.1) [DC1AAB7C-F417-3238-BB3F-2A5B84D67B90]
  	dependency: com.apple.iokit.IOSCSIArchitectureModelFamily (3.7.7) [02F5D538F9]@0xffffff7f95ae9000 07D953DC - 7 B 94-3AE8-A379-2 b

  The process corresponding to the current thread BSD name: mds_stores

  Boot args: nvda_drv = 1

  Mac OS version:

  15E65

  Kernel version:

  15.4.0 Darwin kernel version: Fri Feb 26 22:08:05 PST 2016; root:XNU-3248.40.184~3/RELEASE_X86_64

  Kernel UUID: 4E7B4496-0B81-34E9-97AF-F316103B0839

  Slide kernel:

  0 x 0000000015000000

  Text of core base: 0xffffff8015200000

  Text __HIB base: 0xffffff8015100000

  Name of system model: MacPro5, 1 (Mac-F221BEC8)

  Availability of the system in nanoseconds: 299243519628898

  last load kext to 299240993980004: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f98057000 size 32768)

  Finally unloaded kext to 288317647533104: com.apple.driver.AppleHIDKeyboard 181 (addr 0xffffff7f98050000 size 28672)

  kexts responsible:

  com.nvidia.CUDA 1.1.0

  com.nvidia.web.GeForceWeb 10.1.1

  com.nvidia.web.NVDAGM100HalWeb 10.1.1

  com.nvidia.web.NVDAResmanWeb 10.1.1

  com Blackmagic - design.desktopvideo.iokit.driver 10.3.1

  com Blackmagic - design.desktopvideo.iokit.framebufferdriver 10.3.1

  com.newer - tech.kext.mxpciel2esu3_esata 1.2.0

  com.newer - tech.kext.mxpciel2esu3_usb 1.2.0

  com.newer - tech.kext.nwtmem 1.0.0

  com Apple.filesystems.smbfs 3.0.0

  com.apple.driver.AppleHWSensor 1.9.5d0

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AudioAUUC 1.70

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.iokit.IOBluetoothSerialManager 4.4.4f4

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleTyMCEDriver 1.0.2d2

  com.apple.driver.AGPM 110.21.18

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.AppleHDA 274.7

  com.apple.driver.AppleMikeyDriver 274.7

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.4f4

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  com.apple.driver.AppleFWOHCI 5.5.2

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.Intel82574L 2.7.0b1

  com.apple.driver.AirPort.Brcm4331 800.20.24

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBUHCIPCI 1.0.1

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com.apple.driver.AppleXsanScheme 3

  com.apple.driver.AppleHIDKeyboard 181

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com Apple.kext.Triggers 1.0

  com.apple.iokit.IOSurface 108.2.1

  com.apple.driver.DspFuncLib 274.7

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOAcceleratorFamily2 205.3

  com.apple.AppleGraphicsDeviceControl 3.12.6

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.4f4

  com.apple.iokit.IOBluetoothFamily 4.4.4f4

  com.apple.driver.AppleHDAController 274.7

  com.apple.iokit.IOHDAFamily 274.7

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.iokit.IOAudioFamily 204.3

  com.apple.vecLib.kext 1.2.0

  com.apple.iokit.IOSerialFamily 11

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.driver.AppleSMC 3.1.9

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com Apple.Driver.USB.cdc 5.0.0

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

  com.apple.iokit.IOBDStorageFamily 1.8

  com.apple.iokit.IODVDStorageFamily 1.8

  com.apple.iokit.IOCDStorageFamily 1.8

  com.apple.driver.CoreStorage 517.20.1

  com.apple.iokit.IOFireWireFamily 4.6.0

  com.apple.iokit.IOAHCISerialATAPI 2.6.2

  com.apple.iokit.IOSCSIParallelFamily 3.0.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.iokit.IO80211Family 1110.26

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.driver.usb.AppleUSBUHCI 1.0.1

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417.2

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  com.apple.kec.Libm 1

  Model: MacPro5, 1, BootROM MP51.007F.B03, 6 6-Core processors Intel Xeon 3.33 GHz, 24GO, MSC 1.39f5

  Graphics card: NVIDIA GeForce GTX 970, NVIDIA GeForce GTX 970, PCIe, 4 095 Mo

  Memory module: DIMM 1, 8 GB, DDR3 ECC, 1066 MHz, 0x85F7, 0 x 463732314755363546393333334700520000

  Memory module: DIMM 2, 8 GB, DDR3 ECC, 1066 MHz, 0x85F7, 0 x 463732314755363546393333334700520000

  Memory module: DIMM 3, 8 GB, DDR3 ECC, 1066 MHz, 0x85F7, 0 x 463732314755363546393333334700520000

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.24)

  Bluetooth: Version 4.4.4f4 17685, 3 services, 27 aircraft, 1 incoming serial ports

  Service network: Ethernet 1, Ethernet, en0

  Network service: Airport, AirPort, en2

  Serial ATA Device: HL-DT-ST DVD - RW GH41N

  Serial ATA Device: HL-DT-ST BD-RE BH12LS35

  Serial ATA Device: OWC Mercury Electra 3G SSD, GB 960,2

  Serial ATA Device: WDC WD20EARX-008FB0, 2 TB

  Serial ATA Device: ST6000NM0024-1HT17Z, 6 TB

  Serial ATA Device: WDC WD60EZRZ-00RWYB1, 6 TB

  Serial ATA Device: WDC WD60EZRZ-00RWYB1, 6 TB

  Serial ATA Device: OWC Mercury Accelsior PCIe SSD, 479,95 GB

  Serial ATA Device: MARVELL VIRTUALL

  SCSI device: Equipment of SCSI target @ 0

  USB device: USB Bus

  USB device: element-Tk

  USB device: USB Bus

  USB device: USB Bus

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  USB device: USB Bus

  USB device: USB Bus

  USB device: USB Bus

  USB device: USB 2.0 Bus

  USB device: External USB 3.0

  USB device: USB 2.0 Bus

  USB device: Hub

  USB device: USB OPTICAL MOUSE

  USB device: Keyboard Hub

  USB Device: Apple keyboard

  USB device: Hub

  FireWire devices: built-in_hub, up to 800 Mb/s

  Crush Bus:

  Well, the IO freezes, you know the combined power of PCIe cards?

  • Global maximum 300W for all PCI Express slots

• AHT inconsequential error Ram 4MEM (Mac Pro 4.1)

  Hi all.

  Something weird going on here. Evil Finder behave sometimes (especially with the readers of WebDAV connected cloud/external) and Photoshop don't... Well well... strange things. So I thought I would check my material with AHT.

  I have a Mac Pro 4.1 / 2.93 GHz Quad with 24 GB of RAM: 2 x 4 and 2 x 8 GB. AHT reports a RAM error (4MEM). So I removed all the DIMMS and test began with the two 4 GB ones and AHT returned an error (4MEM) RAM. When I test both 4 GB modules in AHT 1 and 2 housing reports and a mistake. When I test a single module of 4 GB in slot 1 or 2, I get no error 4MEM. So the two modules installed together DIMMS = error. Installed individually don't = "no found prolems.

  In addition, 4MEM errors seem incompatible:

  65/4MEM/40000006: 0X799D7C18

  9/4MEM/40000006: 0X799D2998

  Then, I tested all of the 24 GB of RAM with MemTest86 CD but he could not find any problems.

  Someone has an idea, what happens?

  It would be really good if, when an error has been detected, memory modules would all just dropping dead, problems would be easy to isolate. But this isn't the case. Memory problems are difficult to find, they come and go, it is very difficult to 'catch them in the Act. Synthetic patterns of tests memory do not always generate the same failure that made a running system.

  But your money Mac Pro tower with processor Xeon processor uses memory RAM of code of error correction. Modules of memory have eight extra in addition to the 64 data bits control bits, as well as your Xeon processor use on all references to memory.

  On writing, permutations of parity on the subsets manufactured with care the data bits are stored in the extra bits '' syndrome. '' On reading, a lot of correction and error detection can occur. Mistakes single-bit are detected and hardware corrects these errors in tense cycle of memory, without any software intervention. Error indicators are read from time to time in the background, and the results are recorded by the memory module.

  Generally, a benarde error cannot be corrected, so to design this cause your Mac to stop during a panic machine control, core, often detected by multiple processors to prevent the poisoning of your data.

  Errors counters can be read by the memory of the about this Mac report:

  

  chart de.com

  your report will be slightly different, but the information it presents is STATIC - for updated information, you must refresh the report or call it again.

  Many tests memory of third parties are not designed to run on a Mac with memory error correction. As simple mistakes are corrected in Hardware on-the-fly, they aren't.

  In addition, the error correction is used very aggressively at the start. The reasoning is that the nay errors that occur in these seconds must be so severe that the modules must not be used by the system, and their locations will be marked "void".

  Any module that is seen as BAD in any situation is really BAD, even if they suffer later. If your Mac was overheating for a different reason, which may explain why the modules tested bad is perhaps the only excuse. If you eliminate overheating, these modules may be ok later.

• Mac Pro randomly turns off by itself

  I've had this problem for almost a year now with my mac pro, mid 2013 A1289 and could not find a solution to this day. It randomly and spontaneously turns itself off. The boss is very random. I can turn it back on after a few seconds, but he always die on me shortly after. My warranty period is now over and it does not apply to service nearby (I must send it through flight to the nearest service).

  A few months back I asked my warranty and send it to apple. They said that they replaced the logic board. Many worked for a few weeks but the problem came back (at this time, that my warranty is over). not even the support of apple on the phone is unable to give me a solution. So, I did a lot of research and try to fix it myself with the help of Heads of the local computer. I suspected a overheating, but the problem came even when I turn it on for the first time in 2 days. I got a 2kva voltage stabilizer and APC back ups pro 1000, did not help. I got all my RAMS controlled, are all 100% working. I removed a few RAMS and switched around to see if there is problem with the slot machines, has not worked. I bought an SSD, deleted all my old HDD, installed a new OS, still the same problem. The only thing that I have not checked and now my only suspect because of the problem is the power supply.

  Sorry for making it very long but I wanted to be as detailed as possible. I lost a lot of time, thought and money. And it's hard not to feel deflated. Please, if there is someone out there who can find a solution, it would mean a lot.

  Note the next closing time. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of the shutdow. Suspicious message here.

  Look before the entry titled BOOT_TIME because this indicates that the beginning of a startup.

  Also, what Mac do you have? A1289 indicates your desktop Mac Pro Tower silver and covers many years. The last silver Mac Pro Tower has mid-2012. I end 2013 Apple introduced the Mac Pro black trash

• How to unlock my book mac pro with my watch i

  How to unlock my book mac pro with my watch i

  The watch must be update shows OS 3, and MacBook to macOS Sierra.  Then go on the MacBook in settings-> Security & privacy-> and select "Allow Apple Watch unlock your mac".

• Hi my product is: bendahmane الطراز: Mac Pro معرّف الطراز: MacPro6, 1 المعالج of bendahmane: Quad - Core Intel Xeon E5 سرعة المعالج: ٣٫٧ غيغاهرتز عدد المعالج: إجمالي عدد المراكز ١: ٤ الذاكرة المؤقتة L2 (لكل حزمة): ٢٥٦ ك.ب.   ذاكرة مؤقتة L3: ١٠ م.ب.   الذا

  Hello

  my product is:

  Bendahmane الطراز: Mac Pro

  معرّف الطراز: MacPro6, 1

  Bendahmane المعالج: Quad-Core Intel Xeon E5

  سرعة المعالج: ٣٫٧ غيغاهرتز

  عدد المعالج: ١

  إجمالي عدد المراكز: ٤

  الذاكرة المؤقتة L2 (لكل حزمة): ٢٥٦ ك.ب.

  ذاكرة مؤقتة L3: ١٠ م.ب.

  الذاكرة: ١٢ غ.ب.

  إصدار Boot ROM: MP61.0116.B16

  MSC إصدار (النظام): 2.20f18

  إصدار lighting: 1.4a6

  الرقم التسلسلي (النظام): F5KMF27QF9VM

  للجهاز UUID: 500484C9-32CE-52F7-95AE-E4D9B79BD6A4

  my? is

  1. before a nearly a month, safari can doc xml oped as normal text, but it does not give me this msg:

  (This XML file doesn't have any information of style associated with it.)

  2 - there is a set of nested folders that I can't get rid of. Whenever I try to trash, he reappeared just a few seconds later:

  System > library > Caches > com.apple.kext.caches > start

  2 - there is a set of nested folders that I can't get rid of. Whenever I try to trash, he reappeared just a few seconds later:

  System > library > Caches > com.apple.kext.caches > start

  The items in the folder top level system are protected.

  Do not attempt to directly remove or change anything in the system of higher level folder.

  If you delete these files, your Mac is likely to ever be reactivated.

  If you want to regenerate starting kext caches, restart your computer in safe mode (your username and password will be required), and then restart in normal Mode and caches will be rebuilt at the time (your startup will take a little longer because of this).

• RAM for Mac Pro 3.1 positioning

  Hello world

  I currently have 8 GB of RAM installed as follows:

  Riser has: (top)

  2 GB in the Dim 1 location

  Dim Slot 2 2 GB

  Riser B: (bottom)

  2 GB in the Dim 1 location

  Dim Slot 2 2 GB

  My question is I ordered a 8 GB kit (2 x 4 GB) and I'm not sure in which riser/s I should put them so could someone please advise?

  Thank you

  David

  From:

  Mac Pro (mid-2012 or earlier version): how to remove or install memory - Apple Support

  If you have	Install
  Two DIMMs (standard configuration)	One on the top card and the other on the background map
  Four DIMM slots	A pair on the upper memory map and a pair on the background map
  Six DIMMs	Two pairs on the upper memory card and a pair on the background map
  Eight DIMMs	Two pairs on the upper memory map and two pairs on the background map

• Sonnet Tempo SSD Pro - does not fit into my Mac Pro.

  I just bought a Sonnet Tempo SSD Pro Plus (the same, physically, like the Sonnet Tempo SSD Pro)

  I can't even came close it enter my Mac Pro end 2012. On the back of the bumps in the fan card, even with the fan cover pulled back.   This isn't a case to remove the lower lip, which obviously I do, I can't do it AT all, not even at an angle.

  I called Sonnet, but incredibly the tech said that it must adapt.

  It seems that I have only 2 choices: unscrew the fan and moving it more far forward of the mac (somehow) to cut about 1/2 "on the back of the Sonnet card.  The latter would obviously kill my warranty, and I don't even know if the bloody thing still works.

  To my amazement, I find nothing about it online.  It's like the Twilight Zone.

  Any ideas?  Someone knows has a video that shows a successful installation?

  Pls confirm what Mac you have.

  There is no end of 2012 Mac Pro, only mid 2012.

  There is a 2012 end MacBook Pro.

  Many retailers who sell SSDS have diagrams or installation videos. An example https://eshop.macsales.com/installvideos/macpro_2010/

• More high graphics card Possible for early 2009 Mac Pro

  As the title suggests, I have an early 2009 Mac Pro with 12 GB of RAM.

  I want to update my graphics card to something better and I have no idea of what I put in the card. Ideally, I would like to put the last possible graphics card that is compatible for this.

  I don't know what I would look for PCI or PCI - e and what diet I would look for that would support such a computer "arcane".

  Any advice would be greatly appreciated!

  Best wishes

  Sergio

  the 2009 mac 4.1 pro can be upgraded to a number of current spare cards from Nvidia and AMD, but in many cases the cards require custom flashing of the Distributor and custom drivers. You need to buy a card with a distributor of mac because versions "Windows" of these cards will not work out of the box and OS X will not support without 3rd party drivers. This procedure is not recommended by apple that would rather you buy a new mac pro and again I want to say something for $5K, which offers the latest GPU is already 3 years old.

  research on the Web "Mac Pro 4.1 GPU" for more details.

• Apple Mac Pro "Quad Core" 2.8 (2008) - worth the effort?

  I just got an old Mac Pro.

  Model A1186 EMC no: 2180

  Mac Pro 2.8 8CX/2X1G/320/2600XT/SD/BT - GBR

  He appears at the start, but the dead of maybe ATI graphics card, as I get nothing on monitor.

  But he is recovering our DHCP server's ip address, and I can ping.

  If something works.

  Question;

  It is better to play with? If I don't get this job will update to the last OSX?

  Any suggestions how to distance inside from a Windows PC?

  Could someone suggest a cheap videocard, I could use just to see if it works?

  It is better to play with?

  Thanks for your suggestions?

  'Later' a few days ago is 10.12 Sierra and that Mac is not supported under Sierra.

  10.11 El Capitan is always available for download (but deliberately difficult to download 'accidentally'). Any downloadable Mac OS requires you to have 10.6.8 in place first, because this is the version with a stable Mac App Store.

  In an emergency, ask the dealer if they have a "Full Retail" 10.6.8 Snow Leopard DVD they could give you, or buy it for $ 20 on the Apple store online. Gray discs only work for the exact model, they are made for, so a gray disk for an iMac will not start and will not be installed.

  "What graphics card" is motivated by what you plan to do with it. Mac-specific firmware a graphics card is necessary for a photo before the login screen. GT120 Mac firmware card is very affordable, but it's not bad a card if you plan on editing video and other.

  To run El Capitan, there must be a minimum of 4 GB of RAM, and more is better. Your Mac uses DIMM modules in pairs in adjacent locations, and if you fill out accidentally all the slots, memory in double width for an increase in the speed of 17 percent.

• Using SDS Macbook Pro under Mac Pro

  I recently installed a new OS (Yosemite) and several audio programs / music I use in my studio on a new SSD in my laptop - Macbook Pro - I'm not sure I'll keep.

  I have a Mac Pro 2012 Tower.  Can use the SSD of the Macbook Pro (or a clone of it) in the Mac Pro saves a lot of installation time and download of updates for all my audio programs?

  I searched a few days if an SSD (or clone) of a Macbook can be used in a Mac Pro Tower.

  Thanks in advance for your kind answers.

  Yes, it will work in the Mac Pro Tower-silver. To use it you need to an adoptive parent or a sled like this

  https://eShop.MacSales.com/item/other%20World%20Computing/MMP35T25/

• No sound optical input on Mac Pro

  I'm working on some problems with my optical sound system, and I have a recorder DAT Sony outlet in my Mac Pro, Late 2010 5.1 Sierra running. I bring the signal of the DAT, via an optical cable in the Mac - I get a visual cue on the sound preferences - but not his actual computer, any output, I try: internal spkrs, Line out, Digital out, bar his monitor, or Bluetooth headset. That is what it is? I trashed preferences sound and zap the PRAM. No change.

  Hmm... It is of course odd. If you hold down the option key and click on the speaker at the top of the screen icon, you should see a list of all the available audio inputs and outputs, you can also find it under system preferences > sound

  other this, try to pull the Audio high noon and see what she has set, sometimes, strangely enough, IT Gets the value to something weird like 96 khz or line output, or some of these.  except that, depending on the application you are using, you may need to edit the record source and to ensure that play through is committed. your device should appear if all goes well. I think it must be configured as 44 kHz or 48 khz

  Sorry I can't be more helpful

  John B

• Mac Pro can't find external CD-ROM when plugged in. fix?

  Mac Pro is not find my external CD/DVD/ROM when I plug.  I tried both USB ports.  These ports are working with my iPhone.  I did the update of Sierra recently.  I tried to restart my laptop with the trendy ROM and without being trendy. Nothing seems to work.  How can I find my plug-and-play CD/DVD/ROM?

  Your external DVD drive is compatible with Mac OS X?