Similar Questions

• My hp LaserJet 1022nw fails to analyze the download of the printer driver after that macOS Sierra upgraded.

  After switching to macOS Sierra, my printer (hp LaserJet 1022nw) WiFi does not print work orders, even if the printer seems to be to receive the order of work and how to complete it in the work queue.  Connect the printer to my MacBook Pro via USB, I am able to print without problem.  Other computers on the network continue to be able to print wireless.  When I connect via USB and try to scan a updated driver, download cause analysis a software fault message.  Any ideas on how I could proceed to continue to connect and use my printer wireless with the new OS?  The 1022nw is detectable as a printer available (wi - fi) and can normally be added to the list of printers, but doesn't have the print queue even thought that they seem to have been dealt with, and then disappear from the queue.

  Open System Preferences > Printers and Scanners and select the print tab.

  Then the right or control click on the printer on the left then click: reset the printing system

• image capture does not work with the epson scanner after macOS sierra upgraded

  Image capture no longer works with epson scanner v800 after upgrade. I installed the new drivers from epson, and it still does not work. Just says: "waiting for scanner", but nothing ever happens.

  Drivers Epson macOS 10.12.x specific https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=256062 & infoType = Do wnloads & platform = OSF_M_X12 do not work?

• macOS Sierra upgrade takes hours

  Configuration: Macbook Air 13 "(n ° de série C1MQJ13YG944), passage of 10.11.6 to Sierra"

  Problem: During the upgrade the system stops all applications and the screen become black with only a spinning wheel visible. 6 hours later, the screen remains black and shows the spinning wheel.

  I hit the space bar and the escape key, but nothing has changed.

  The system is fully charged, turned on, and I have a full system backup on a disk drive external bootable.

  Press and hold the power button until the computer turns off. Wait at least ten seconds. Restart the computer. Installation now look here where he was and begin to move forward? Or it just restarts your old version of Mac OS X?

• iSight camera works does not since macOS Sierra upgrade

  strain OK model, it seems that my iSight camera stop working after upgrade to help the Sierra

  I have exactly the same problem, I use a MacBook air from 2012, what about you? NVRAM and other resets do not work, but my camera was well under the previous operating system. The update he screwed up, after reboot it works for about 5 minutes and stops. I created a new user account, the same problem

  A little luck?

• Cannot connect after macOS sierra upgraded

  screen does not open my account just the other showing on login, how to fix?

  Hi the wing,

  At - your computer display another message after the upgrade but before the login window?
  For example, some sort of all managed message?

  Have you tried a safeboot?

  IF this does not work, have you tried recovery mode?

• External hard drives do not mount after macOS Sierra Upgrade I just upgraded to macos sierra, and my hard drive (USB) is not editing (which still appear in disk utility).   Any ideas?

  

  It is an NTFS drive and needs a driver from Seagate.

  See: http://www.seagate.com/gb/en/support/downloads/item/ntfs-driver-for-mac-os-maste r - dl /

• I upgraded to MacOS Sierra recently, since then, my Mac Mini needs to strat befor 5 times actually implemented, why?

  Mac Mini (mid-2011), 2.5 GHz mid-range Core i5, 16 GB 1600 MHz DDR3, 256 GB Solid State Drive Storage

  10.12 MacOS

  I upgraded to MacOS Sierra recently, since then, my Mac Mini must start 5 times before it actually starts.

  It starts and restarts in the middle of the boot process, 4 times.

  Why?

  I have experienced a similar curiosity, but often with messing around on a Linux partition. I do not have a definitive answer for you, but check on this thread (MacBook Pro will restart several times during the boot process) and maybe here further (oots http://apple.stackexchange.com/questions/88213/how-to-find-cause-of-repeated-reb)

  I hope this helps!

• Downgrade macOS Sierra El Capitan question

  Hi all

  earlier today, I upgraded my Mac mini (end 2012) to the latest version of macOS Sierra.

  After 1 hour of use, I realized that many of my plugins FCPX were not working.

  I contacted the developers, and they said does not update the plugins and they told me to go back to El Capitan.

  I decided to listen to them and try to downgrade my OS.

  I restarted the Mac and held down Cmd - R or something like that that took me to the disk utility screen.

  Then I went down to dinner, and when I returned 30 minutes later my Mac had entered the sleep mode for some reason any.

  I woke up the Mac and 40 seconds later the power went out for 5-10 minutes.

  After the blackout, I restarted my Mac that took me to a black screen with a flashing question mark folder.

  I followed some tutorials online (including how to enter get - and the recovery of internet mode), but after a while even restoration of the internet shows me the flashing question mark folder.

  I don't know what to do.

  And no - unfortunately I don't have a Time Machine backup.

  But I have a backup with all my most important files.

  Is it possible to force the Mac to reset itself or something like that?

  Help, please.

  Best regards

  Filip

  Mac mini (late 2012)

  I7

  16 GB OF RAM

  500 GB Samsung SSD of 840 - evo

  Graphics Intel HD 4000

  UPDATE: The globe stopped spinning (yet), but instead of showing me the flashing question mark folder, a text appears below the globe: 'apple.com/support-2002p'

  Simply connect the computer to your router using Ethernet and press CMD + ALT + R

• Question of WebGL on macOS Sierra

  I upgraded to macOs Sierra and since then, I've noticed a degradation in performance of Webgl.

  I have a 13-inch early 2015 rMBP and any program I write (or open on the internet) is able to go beyond 40 fps.

  I don't know if it affects OpenGL too... Am I the only one that has this problem?

  I have this problem as well. I also have a 2015 13 "Macbook Pro and I can use is more TinkerCad, because it's useless now."

  This should probably be posted in the Group of Sierra of macOS.

• Two questions with Siri on macOS Sierra (voice quality and call sheet)

  I am having several problems with Siri on macOS Sierra...

  (1) the voice is of poor quality. I know that when you upgrade first, you get low quality voice until he had the opportunity to download the high quality voices, but I waited a week and even re-installed Mac OS several times, and I always get low quality voice. Even if I change voice in system preferences. I have macOS Sierra installed on my Macbook w/retina, and the voice quality is infinitely superior. Apple sugarcoat it on older Mac? I don't know that my 4-core i7 is well able to use the voice of the highest quality.

  (2) when I ask him to show my business address, or ask who my brother or finance is, she is confused, as if he can't read my card contact properly. The exact same contact card works fine on iOS 10. I tried turning off the Contacts in iCloud parameters and reactivated so he would be re - download, but it continues to provide partial information of the card. For example, for addresses, they go up like OTHER and display only the city and State, even though I have a full home address listed. I disconnected and connected as my fiancee, and his works fine.

  Thank you

  Dave

  Post edited by: griffd2004

  Just a quick update - after deleting my contacts, reassignment to a new contact using "Make my contact" (which seems buggy btw - seems not stick) reinstall macOS Sierra twice, disabling iCloud, tilting and contacted him and Siri, etc. etc., it turns out that he was using a contact to my account (?) card, even if I didn't 'Calendar' selected in my Google account. I removed Google in my list of Internet accounts in Preferences system (along with a few others), and now it's using the new map that I created in iCloud. It's weird that it would give priority to my Google account on my iCloud account so much, especially since I have not yet activated contacts?

  Still need to understand why the high quality voices will not download.

• after upgrade to macOS sierra cannot connect to citrix receiver apps

  I use Citrix receiver apps to make my day to day work. The same citrix apps are also accessible via a web browser (Safari) and everything worked fine until the version IE Capitan.

  After upgrade to macOS sierra I can't you connect/launch of citrix apps. I tried with receiver and citrix via web browser as well, but its not connecting.

  Is anyone else facing the same issue or know the fix.

  Earlier, I thought that maybe some problem of connectivity, but after a lot of troubleshooting it still did not work and shows the same error "failed to initialize." (attached image).

  Then clicked on suddenly to mind that I just upgraded my MacBook OS. In order to confirm if his new problem of macOS or anything else, I have installed Windows 10 on vmware fusion and tried to connect to citrix receiver and it worked only! without any operation of additional troubleshooting, it is confirmed that the issue is again macOS.

  So as a temporary workaround, you can use virtual windows OS on top of the operating system Mac OS page sierra to launch citrix applications.

  But apple needs to fix in the Sierra.

  This seems to be, in part, a browser problem.

  Have you tried, since El Capitan or Sierra, another browser?

  And it would move from Citrix to make their applications compatible with OSX.

• Upgrade to MACos Sierra now all my 'saved' go to the wrong folders

  I was wondering if someone else has upgraded to the beta version of MacOS Sierra. Now, when I save a file, it goes in the wrong folder.

  For example if I have a folder with the 6 files in there:

  Folder 1

  Folder 2

  Folder 3

  Folder 4

  Folder 5

  Folder 6

  And I chose to save it in the folder 4. When I go into the folder 4 it isn't here, but if I look in other files, he sometimes recorded on file 2, sometimes 6 file is in the right area, just in the right folder.

  Anyone experience anything like this?

  better to demote, still beta beta

• Impossible to upgrade usb macos sierra

  Hello!

  Created a USB Sierra installer in accordance with the old guide: create a bootable OS x - Apple support Installer

  The command used is:

  sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ macOS\ Sierra.app 

  USB is supposed to be successfully created, and I get the icon 'Install macOS Sierra' on the desktop after inserting/editing of the USB. I then open it and run the Setup program, it tells me it takes about 6 minutes, and then it tells me to restart in the sierra of macOS. After the reboot, I'm still on El Capitan!

  What I am doing wrong? I would like to install from USB to avoid having to download each of my Macs! It would be very unhelpful in my time and my bandwidth!

  As soon as it restarts, try to select the installer from USB as a boot using Boot Manager device - an Option button and selecting this device.

  Please read an external USB (Mac Intel) - storage device from Apple Support.

• Moving files in macOS Sierra

  In previous versions of OS X to move a file of a key USB or other external drive I could just highlight the file. Then I hold down button 'command' and press my pad and move the file. Since the upgrade to Mac OS that doesn't seem to work. Any ideas?

  Hi NR2D,

  I understand that after updating to Mac OS Sierra you are unable to move the files to an external drive on now order everything by dragging the file. I know it's nice to have quick access to this feature, so I'm happy to help you.

  Looking at this article, this feature should always be around:

  macOS Sierra: organize files in folders
  

  Move the files to another disk: Press on and hold down the command key, and then drag the files on the disk.

  Because this does not work for you, there are some troubleshooting we can do to isolate the problem. First of all, we will have you start in Mode safe mode to see if it works there:

  Try safe mode if your Mac does not end commissioning - Apple Support

  Thereafter, use a new user account to test your question:

  How to test a question in another account on your Mac - Apple Support

  If you continue to experience this problem after going through these resources, you can reset your SMC that can help in problems of system like this:

  Reset the management system (SCM) controller on your Mac - Apple Support

  Thank you for using communities Support from Apple. See you soon!