Made the audio with the video (preferably parameter) or do it in Encore DVD?

Similar Questions

• Sound works in preview, but not when I made the video output! :( [ADOBE AFTER EFFECTS CC 2015]

  Hey!

  I'm pretty new to Adobe after effects CC 2015. I have a video that is about a minute, everything works as it should when I preview the it. But when I visited, with the right settings, the sound will not be rendered.

  So basically I can hear all the sONFERENCES when I saw it, but when I make it I cannot here any sound at all. I tried to get the sound on Auto and on. But nothing works.

  

  And Yes, some of the mp4 files I use for audio as well, but will not play the file audio mp3 or another. Some would like to help! I've had this problem for a few days now!

  We have a solution for this in the update after effects CC 2015 (13.6):

  http://Adobe.LY/1MVxHgX

  Try it and let us know how it works for you.

• Please help try to copy the video in windows movie maker to burn to dvd

  First of all Hello, this is my first but I have read a lot of posts and tried to figure it out, but think I made things worse, I have a dell inspiron 15 something and a panasonic HDC-HS20, I had to reinstall windows and all pilots who, I think I did as when I put my camcorder software I began to have problems He says not to approve a 64-bit program and then it worked for a while then kept computer crashing then a black screen at start up and finally when I tried to burn videos to dvd, it says that I don't have a dvd player/burner, so I will now try to transfer my videos through Director of windows I downloaded everything it says that I need and it transfer files, but when I add them to movie maker it shoes a yellow triangle with a black exclamation point in each sinus and when I press on the bar moves along to play, but no images so im assuming that he does not, is it possible to do what I do, or I need to reinstall my software of camcorder and just hope that it recognizes my drive? any help would be appreciated.

  Thank you

  Sorry, I can't say I have now added my software that came with the camcorder, the software is called HD writer AE 1.0 and checked the compatibility of my product with microsoft and it says it's ok with a 64-bit, recharged even when software and when I click to create media that he says again in writing destination @cannot find accessible driver , so I looked through articles where dvd burner is not recognized by other programs, but he told me to go in accessories of control, performance etc. and do a right-click on the HKEY CURRENT user but it says nothing about the registry keys, it is said by default with a symbol beside him ab and under said data not defined

  Thank you

  =================================================
  The following Panasonic sheet for your camera model # HDC - HS20 States
  He records on SD/SDHC cards to the MPEG-4 AVC/h.264 format.

  Panasonic HDC-HS20
  http://Panasonic.NET/AVC/camcorder/HD/global/products/hdc-HS20/specifications.html

  Then... because Movie Maker is not compatible with this format... the best bet would be
  be to copy video content in a folder on your hard drive, convert it to a
  format Movie Maker is compatible with as WMV, then you can import into
  Movie Maker.

  The following links are not * the * solution... but can help to start.

  Movie Maker - import AVCHD files
  http://www.Papajohn.org/mm2-importing-video-AVCHD.html

  New camera with AVCHD not recognized by MovieMaker
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=231160

  Movie Makers Forums
  http://www.windowsmoviemakers.NET/forums/default.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Problems with editing of the video demo...

  Hello

  I have created and edited a video demonstration, which, while in Demo Video Edit mode, everything works as expected, but when I returnin the blade in the film with the slide I made the video on, I saw the slide, but all items are not there... the images that were in the video editing mode are there , but not in the CP file...

  I hope someone can help :-)

  See you soon

  Sabine

  Here is the timeliine in video editing mode

  

  And it's the normal timeline view

  

  Hi Sabine,.

  I am sure that many users do not know the difference. For this reason (do not earn points, really) I would ask mark you this thread as answered. There is no so many questions on all video editor, for some reason (I have my ideas on these reasons). And it's very important to know that you have to add and synchronize static objects in the video editor, even for a dia cpvc which is inserted into a cptx file, because when you insert these objects into the workflow normal editing for cptx-slides, they will never show upward because the video is still on top. When the thread is marked as replied, hope more people with similar problems will find.

  Lilybiri

• Unable to get organization to accept the video file.

  I tried it works in 7.0 of the Agency, but he would not accept a HD video file. I downloaded a trial of body CS5.5 (I bought as well but will have to wait for the disc to arrive) and now the file is imported, but it appears as an audio with no video. The video plays fine in Windows Media Player. Here's the report from GSpot on the file:

  

  Can someone tell me any reason, I can't import this file?

  Thank you

  ..... Gord

  No matter if you have QT installed for this file; It won't help anyway. Premiere Pro does not support H.264 in an AVI container. We can solve the problem.

  1. Download here the last 32-bit static build of FFmpeg: FFmpeg Zeranoe - built
  2. Open archive. you will probably need 7 - zip from the archive is a .7z file. Check out the ffmpeg.exe file in archive (this is in the 'bin' folder) to the folder containing your opinion.
  3. Create a text document (Notepad is fine) called "avi2mp4.bat" (without the quotes) in the same folder as the notice, making sure to change the default TXT to the bat extension.
  4. Paste the following text in the BAT file:
     

     OFF @ECHO
     "for %% in (*.avi) ffmpeg - I" % a %%~na".mp4" - vcodec copy - acodec copy - f mp4 - y. "

  5. Once you save the BAT file, double-click it; your opinion will be reconditioned to MP4s without any conversion. The MP4s will import correctly in Premiere Pro.

• Adding still Photos to the video project

  I have a video project that I'm working on.  My preset in first Elements 10's HD 1920 x 1080i 5.1 sound.

  I got out of the video on DVD and played it on a drive standard def DVD and on my computer.  The video is horrible.  If I play on a Blu - Ray player, it looks perfect.  Anyone know why that would happen?

  The DVD release should not play on a standard player def DVD even if the source material is recorded in HD (AVCHD to Sony camera)?  The presets are selected in source material not the resolution output, no case?

  I also did photo slideshows and used only the photos that I reduced to 1000 x 750 (72 dpi).  The video image is superb playback via a standard DVD player or a Blu - ray player.

  However, when I try to combine the two... HD source material with more photos... nothing seems to work.  I chose the good built-in HD and resized the pictures both 1000 x 750 and 1500 x 1127 and they both look bad during playback via a normal DVD player or my computer.

  How can I get my photos in a single project to look great during playback via a standard DVD player and playing on a computer and HD video.

  Yet once, I chose the right preset for video, since it will be the largest part of my project and tried resizing of photos to meet the project preset. I chose DVD as output.  Video and photos look terrible on playback via a standard DVD player or on the computer.

  Help, please!

  Welcome to the forum.

  Unfortunately, you're in down-rezzing from HD to SD, which is 1/4 of the resolution, as your original source files. A SD DVD is never as good as you HD material.

  Is there a reason that you do not have a BD? It is the HD, and will be very close to Source footage.

  Good luck

  Hunt

• Audio DVD chapter 1 does not begin with the video?

  Hi all

  I get on a 20-second delay on the reading/beginning of my chapter 1 audio DVD.  So the video plays silently for 20 sec., then slows down the way as the audio begins and expects that he will catch upwards and from there they play in sync.

  This file has also 7 other chapter on the timeline markers, but those are all triggered by chapter playlists.  Chapter 1 is the only chapter for this sequence that is directly related to a menu button, and this is essentially my button 'play together '.  Chapter playlists play pieces in this longer file.  There is also a second, shorter sequence directly related to a menu button, but there is no problem with the audio for it.

  Other details:

  The problem file is about 63 minutes.  edited in Premiere Pro CS6 1080i HD images.  Finished sequence coded as standard definition Lagarith AVI.  Then coded the opinion of Lag in the SOUL than MPEG2-DVD to min = 2.8mbps target = 6.4 and max = 8 (2 pass VBR).  Audio is encoded in Dolby Digital AC3 320 Kbps.  (The other, more short to the same encoding settings file.)

  The strange thing is that I used the same approach on an earlier version that used audio uncompressed PCM, and I have not experienced this problem.  The video encodes the parameters in

  this case were min = 2.8, target = 7 and max = 8.  The reason why I dropped the video bitrate was to eliminate a stuttering problem I had the effects of transition.  While I was there

  I thought that I would save space on the audio file using the AC3/Dolby instead of PCM.

  I already tried to create a new project and rebuilt from scratch with the same result.

  Help, please!  I have already burned so much time searching for answers to what I can't believe he (also the mysterious effects glitch issue)!  Get killed on my deadlines.

  Thanks in advance for any suggestion or idea!

  The f

  .

  Well, I thought that a few things.  There is probably more to this, but here's what made me through in case it helps someone else in the future.

  First of all, I was wrong above on my working initially PCM audio version.  I returned and retested and had the same problem.  I think that cheated on me which was was that I had tested the shorter chapters first, then when I tried reading complete 63 minutes, the info needed/data file was already loaded and ready to play.  Then when I tried the longer selection, the audio and video have played together because they are supposed to.  A point I want to be clear about is that my test was while making sure that the piece of 63 minutes read correctly in the second as the open media player and has shown the main menu.  No waiting 30 seconds for it to load up, process, etc.  It's how people will try to read the disc in the real world.  They do not attend the child along.

  So here's what I figured out.  First, after reading on the reading lists, I realized I needed, in addition to the chapter selections, I had already built.  So I used the playlist to enable playback of the section 63 minutes and then chapter playlists to give access to shorter parts within this segment.  Everything I had read before talking constantly using a playlist specifically to string together several chronologies, but it works for this as well.  Once I did, it was as if he took the media player need to 'think' about all Chapter markers that he would play through on this segment.  After this change in writing, the audio delay disappeared on one of the test computers.

  But the second computer still had the issue.  So the second part of the solution has been realize (after scanning of many consumers PC articles on the topic) has it easy for a media player to lose part of it is the feature due to the changes in the default settings of your computer.  In my case, for the reading and screening should, I have three media players on this particular system.  I went through and looked at all the parameters by default, and they were quite scattered (I am still under Windows 7 Professional).  So for this test, I went with the lowest common denominator and restore all my settings by default media player from Windows and rebooted.  If you happen to do, be sure to watch your AutoPlay functions, because they may still be in conflict, even if reset you the defaults of others.

  Once I did, I got correct reading on the second computer as well.  Still don't know why there was no clue as to the first part of the question with the preview yet, but honestly, I'm just glad I got through it.  Good luck if it happens to you!

  Jeff

• I can't get the audio to be synchronized with the video editing multicamera?

  Multicamera editing, audio will not be synchronized with the video. I have two clips, 1 Plus 6 iPhone and the other an iPad Mini 2. While the audio wave forms are aligned, they will not match the video... the lips are out of sync. How can I handle this? I use the latest version of FCPX and OS x on an iMac of 2015 end fully charged.

  What are the specifications of media files, the frame rates and audio sampling rates?

• Audio is not synchronized with the video Safari

  I'm in Safari version 9.0.2 on an iMAC with OS X El Capitan v10.11.2.  For a long time the audio has not been synchronized with the video content.  How can I get my Safari audio and video synchronized?  When I use Firefox v41.0.1 the audio and video are synchronized.

  On all Web sites, or just one? Flash video only or also HTML5 video?

• Tried to replace the video card integrated with card pci-e x 16 and lost audio - help please

  Is this normal - when you replace your car video with a pci-e video card you would lose your sound.  The system I have is a Pavilion a1450n and has 3 pci slots and 1 pci-e.  I changed the pci-e video in the bios and everything is fine, but no sound at all.  When I took out the card then I would sound.

  Please help.

  The former system of video seems to give me a little trouble.  He keeps hide and freeze from time to time.  Don't know when that will happen.  But when this happens, a blue screen it freezes or just blanks out and comes back.  It will happen nobody knows.  Everything else works fine.  Hate to give up this old gem - for a lot of software installed to lose.

  Thank you all very much for help.

  William

  Hi, William.

  Yes, when you have an old PC where the BIOS does not have HDMI.

  Your PC thinks that you have installed a sound card and a video card because of the HD audio chip on the video card.

  Thus, he disabled the integrated audio system.

  The fix should be easy...

  Go into the BIOS of your PC, look at the options menu and find the onboard audio setting.

  It will be set to auto or off.

  Change the setting to "Enabled". Save the configuration it and yet when you go out (save the settings and exit).

  When you restart, you should have the back of Board.

• My hdmi cable transmits is no longer the audio with the video, how can I get audio to transmit

  Why the audio transmitted with the video, it is used to

  Hello

  Open windows control panel, open Device Manager and open display devices - note equipment listed here i.e. ATI, NVidia or Intel.

  Then connect your laptop via HDMI to your TV.  Do a right-click the speaker icon in the taskbar, and select playback devices.  Click once on the left (just to point out the entrance), the HDMI output that has the same name as your graphics card, and then click the set as default button, see if you now audio through the HDMI connection.

  Kind regards

  DP - K

• With media player, I get audio but no video. What is the problem?

  Whether it's a wvm file or not, I get a black screen with audio only.

  Hi newbewon1

  1. you try to play a WMV file?
  2. what operating system is installed on the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  For resolution, please refer to the procedure below and identify what codec was used to compress the file. You must install the codec even on the computer to read the file. There is no absolute way to do that, but here are your best options:

  ·          To determine what codec was used with a specific file, play the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On the file tab, look at the Audio codec and Video codec sections.

  ·          Use a non-Microsoft codec identification tool. Many are available on the Internet.

  So you can check if the installation using the correct codec solve you the problem. You can use your favorite search engine to download and install the codec. Refer to the below help links -.

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  http://www.Microsoft.com/downloads/en/default.aspx

  http://support.Microsoft.com/kb/316992

  NOTE- Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps.

• my Dell studio 17 audio does not play on tv with hdmi connected but the video is very good

  I have an old Dell Studio 17 tour with dual processors core T6400 4gig and every time that I plug the HDMI on an external device, the sound disappears on the pc and the tv for 2 years, but the video is great. It never worked, but was not important until lately. Even though I attribute the correct connection including video and audio, no luck.

  Check with Dell support. It may still be under warranty.
  http://www.Dell.com/support

  Thank you

  Marilyn

• Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording.

  Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!

  Hello

  Try resetting the default associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  If necessary:

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  ====================================

  Also follow these steps:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------

  Then, if necessary:

  Have you recently installed another player?

  Reset your associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  ---------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html

  I hope this helps.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• With hybrid CMR, there is a way to disable the audio associated with participating black silhouette so it doesn't not voice-switch the video?

  Other products do not turn on the video, when audio participants talk and I wonder if there is a way to disable this with hybrid CMR / WebEx.  If not, anyone know if it's on the roadmap of Cisco?

  When you view the video within WebEx and telepresence to WebEx Connect, you will see the audio avatar, is how WebEx is designed to display audio participants, and there is no way to change this.  You might contact WebEx Support, but about the roadmap of Cisco, you will need to contact your account manager to Cisco for this information.