Magic bullet vs AE vs first pannel of color lumetric

Similar Questions

• Magic bullet operating is not in first pro cc 2015

  I have problems with magic bullet suite operating in first pro cc 2015. When I use the editing within the interface functions of creating the display shows loading icon and freezes there. I have then close first pro and restart. When I use "seems" because I hit the edit button and magic bullet looks interface opens, a message will appear asking if I participate in something to do with the future of magic bullet looks. I have to click ok or cancel, the loading icon shows and freezes the screen here. I then close the program and restart. Basically, I can't use this software without creating or gel magic bullet.

  

  I did some research. My operating system is compatible. My host application is compatible. I see only 2 questions are: 1. lock of CPU? Or 2. Graphic card Nvidia Quadro 4000 M in my computer, there is not enough grunt to supply the software.

  Does anyone know the solution to this?

  Thank you

  Hi Neil, red giant have solved the problem. The question was my pilot being obsolete. Here's what they asked, in case someone else has the same problem. Try to download the update with your host (host's first pro) closed here is the link for the update obsolete driver who needs an update. Then restart your system and the host (first) and check to see if that fixes the problem.

  Thanks for your comments

• When I use magic bullet in first cs5.5 it takes time to make

  Hello

  I have Dell laptop I7 16 GB intel hd graphics 4400 and I use in first cs5.5.

  When I edit the video and use the magical effect, he takes like 8-12 minutes to return shoots of 5 seconds.

  I can't really work with that.

  I know that my graphics card is not so good, but I suppose that the memory card and the processor is enough for video editing...

  I tried also to use in edius 7.5 and the same problem.

  I saw some videos on youtube and they explain to change the setting sequence at 640 X 480 and then when I export to return to full hd, but I guess that the video quality is also change.

  I really exhausted problem...

  Thank you.

  Some plugins like Magic Bullet are a lot of resources and the configuration of your computer is not powerful enough to cope better than that.

• Anyone able to use Magic Bullet successfully?

  I'm using Premiere CS4 with Magic Bullet Looks 1.2.  When I select the pane control effects and looks like change the Look then it opens LooksBuilder.  I apply some Look and click OK.  When I return to first, nothing that I selected in LooksBuilder is there.  I'm doing it correctly?  The first is Mo supposed to open LooksBuilder plug-in?

  Yes, it is.

• Magic Bullet Looks is missing since the upgrade.

  Hi all

  After the upgrade to Premiere Pro for Premiere Pro 2015.3 (v10.4 "Good buddy"), all my plug-ins Red Giant now seem to be "missing" when I open existing projects containing filters from red giant.

  I have the Magic Bullet Looks applied to an element in a project.  In the effect controls panel - the filter appears in the list as 'Filter in offline mode' (sounds like).

  Anyone who knows the cause, or more importantly, no one knows how to fix this?

  Any help is very appreciated.

  I think that I found the solution to my problem.  I made a copy of the Adobe Premiere plug ins folder C:/Program Files/Adobe/Common/Plug-ins/7.0/MediaCore and saved as a backup to my desktop.  I have emptied the original file of all the plugins and reinstalled plugins via the website of red giant and then reactivated their inserting the code.

  Fingers crossed, it seems to work.

• Problem with Magic Bullet and Twixtor?

  So, I can use Twixtor and Magic Bullet very well, but when he tries to mix the two... It does not work.

  I got a cc of solution miracle on one of my videos, and then when I tried to add twixtor, he removed the cc... Help? @: o (depending on the cs6)

  Precompose the layer with the color correction, and then apply the time remapping effect to the precomposition layer.

  Start here learn After Effects:

  http://Adobe.LY/AE_basics

• I can't seem to install the Red Giant Magic Bullet Suite for CS6

  Hello, I have recently updated since cs 5.5 because of the commotion that was performed on the new options and faster work speed. But as I tried to install plugins upgraded inside, I walked into certain disorders. I can't seem to be able to install the red giant magic bullet suite 11.4.1 a reason any. After I installed the whole package, only InstantHD effect appears as being installed. I tried to solve this problem with their responses to the site but I can't find anything on this problem. So if someone knows how to solve this problem, I would really appreciate your help.

  I installed the CS6 on the c: / drive and everything worked. I spoke with the people at red giant and said that their products are made to be installed in the default directory. I guess they'll fix things later...

  Thanks for the support!

• Red line with Magic Bullet Looks

  Magic Bullet Looks in the video effects panel shows 32 GPU accelerated effects.

  However, when I add it to a clip in one, two or three, I'm going without lines (including the yolk) to a red line above this clip.

  If it's a GPU acceleration effect why I see a line of Red above the clip when I add to this effect?

  My card is a 285 that works very well with anything else.

  

• Magic Bullet Looks - where is the label?

  I can't find where is the name of the applied appearance?

  I often use ag film nd blockbuster without sticker on the SEQ even according to the luminance value. I use them to get closer, then go in a tweak to match.

  I have a project I'm re-Assembly and since its almost 2 years I do not remember what seems dreamy I applied as a basis and it alot od dreamy look in the suite. I do not write it down on this one.

  Then where is the place that tells me what is applied?

  The best I can tell, once you have applied a look 'named '.

  in the list of stations (either a set predefined or custom),

  the name of the facility itself is not stored in the

  First user interface.

  You might be able to go through your existing old timeline

  and save each preset using the custom names that may be

  has recalled and applied at a later date.

  Custom presets are saved in this location:

  C:\Users\*username*\AppData\Local\LooksBuilder\Looks\Custom

• Export to After Effects and the use of Magic Bullet filters

  I have a sequence first CS6 Pro that I have edited.  I opened this sequence in After Effects CS6.  I added several effects filters... then I tried to send it to first so that I can complete the video... create securities... etc.  However, I know that I do something wrong because when I try to put the video of EI at first I can't add it to the timeline.  I tried to use 'create new sequence' and that no longer works.  I am new to using AE and it's my first time experimenting with effects and filters.  Not sure where I'm wrong.  Any help will be appreciated.  All I want to do is send my video published in AE... Add the effects... and return to first so I can finish.

  The result here is that you can just "send" it a sense.  If you start in PP, then send out to EI, then whatever you do in AE automatically appears in PP, so there is no need to "return" to PP.

  The only way to 'send' images above PP is if he starts in After Effects.  You can't have AE in the Middle, starting and ending with PP.  You start in a unique, shipment, and that's the end of the trip.  Send no more.

• Magic bullet in CC?

  Hello

  I just opted for CC. Does anyone know if it is possible to get a panacea seems to work in CC.

  Thank you

  Philippe

  I have it and it works, but there are problems with the application to adjustment layers and a few others. I don't use it that much more.

• Keyframing Magic Bullet Looks in PPCS5

  Is it possible inside looks anywhere?  If you add a blur or sticker on the actor's face, for example, you need the effect to follow the actor it moves above the frame.  Is it possible to make this type of keyframes in the body or EI?

  As a user of looks for a long time, I can say with 99% certainty that you can't set keyframes as you wish. Wish you could!

• First and second color, correct methods

  Hello!

  I have a long - video clip of the part. I turned to a point, but from different angles and shots (medium and long shots). And as a result, I have a video with different exposures and color saturation.

  I created an adjustment layer and applied the Lumitry for the correction with average amounts of primary colors. But now, I would like to correct some settings like contrast and saturation in different parts of my film. What should I do? Add additional adjustment layers above the first layer of setting, I added before or cut my clip in some particular parts and apply corrective effect to those.

  I understand that it is not a technical and theoretical question, but you want to give some advice about this?

  Thank you very much!

  Add layers of additional setting above the first adjustment layer

  Either that, or directly on the clips.  Both should work properly.

• First CC Pro of Lumetri safe reading seems not working not

  I just upgraded to first Pro CC and CC Speedgrade specifically to use the ECCAS dynamic link of these two programs.  First Speedgrade export works very well, but on his return to the first, none of the clips that were added Lumetri effect will play.  The timeline and audio, but the video stays frozen on the last shot without effect.

  I noticed that first can play the preload Lumetri looks like, but whenever I try to apply the Lumetri effect that reminds a safe look, it freezes again.

  I have a nVidia Quadro 200 GPU, and I even updated for the most recent driver hoping that would solve something, but no go.

  Everyone knows this?

  File > project settings > general.

• 10.3 Lumetri does not apply when sent to the queue of the SOUL of first.

  Since update to 10.3 SOUL no longer export LUTs added to the first use of color Lumetri sequences. I had this problem before where a LUT does not exist in the technical dossier of the SOUL, but I checked, and the same exact file is both:

  / Applications/Adobe Media Encoder 2015.3 CC/Adobe Media Encoder CC 2015.app/Contents/Lumetri/LUTs/Technical/VLog_to_V709_forV35_ver100.cube

  / Applications/Adobe Premiere Pro 2015.3 CC/Adobe Premiere Pro CC 2015.app/Contents/Lumetri/LUTs/Technical/VLog_to_V709_forV35_ver100.cube

  When previewing in the export in the first settings dialog, I see that the LUT applies very well - img 1 - but when looking at the same dialogue in the queue of the SOUL not - img 2 - if something is getting lost when sent to the queue of the SOUL (Interestingly, looks like it's something that there is a slight modification of the original without added effects item - img 3)

  It was all working fine in the latest version. Tried clearing the cache, preferences, etc. Does anyone know a fix? Now I can just direct export of first, but it's not ideal...

  

  

  

  OK I got it. The LUT folders in the folders of the Pr and SOUL must be exactly the same, that is, not only have the same files inside, but the same number of files too.

  It seems that Pr will tell SOUL to use the Nth file in the folder structure rather than seek a cube file name. I tested it work with by inserting an additional file dummy in lut SOUL record, and, of course, he always picked on the next lut down from that used in the PR.