3480CT - WinME

Similar Questions

• Install W2K on Portege 3480CT with MK4018gas HARD drive

  Hallo,

  my old HDD broke running under W2K, got a new MK4018gas.
  When installing W2K always had information that W2K cannot find HARD drive.
  In DOS, I can get on the HARD disk, clone a partition that works very well
  but they could not get on the 3480CT Portege always a HARD drive problem
  came.

  Who can help?

  Hello

  This is a common problem, look here (and in particular in the link in this thread):

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=129786

  success

• Portege 3480CT: Multimedia - need a player software Replicator

  I have a Toshiba Portege 3480CT with an external media Port Replicator. I recently loaded Windows XP but do not have the DVD player software. Can someone tell me how to find the appropriate download?

  Hello

  You can use the playback software DVD evry you can find on the market. It should not be used Toshiba one (WinDVD if you think about this one).

  Google a bit and you will find a large number of them. My favorite is the Power DVD Deluxe software. InterVideo WinDVD is a part of the recovery under Win XP OS image, but you can download it from the net http://www.intervideo.com/jsp/Product_Download.jsp?p=WinDVD

• Portege 3480CT: Message: "non-continuous file Bios.

  I have a portege 3480CT that won't start at all (blank screen) outside of allowing me to update bios, if I try and install the bios disk I get a message saying BIOS non-continuous file?

  Hello

  I put t know what BIOS version you use, but please check if you have installed the correct version of the BIOS. As much as I know the latest version is 1.4 form 18/03/02.
  In addition, you should visit this site to verify the correct procedure of BIOS on this device:
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  Please note that the bad BIOS or bad update may damage the motherboard.

  Good bye

• Hibernation on Portege 3480CT

  Hello
  I had a problem on Portege 3480CT were I have installed Win98.
  Received an error message: file not existing Hibernate.

  My Question: Use the 3480 a file to C:\ (hiberfil.sys) and how to create or a hibernation partition?
  What tool would create this partition?

  Thank you

  PHDISK is a tool that creates and activates the hibernation partition/file.
  Try to google for this tool.

  Maybe it helps a little.

  Good luck

• Portege 3480CT lack always high-speed mode frequency

  One of my 3480CT Portege lacks always high speed frequency mode, but it has.

  I couldn't find the setting always high since there were only two options available for the power setting in F1 that are still weak and dynamically switchable only menu.

  Hello

  Sorry, but I don't understand your problem. Can you please specify more? As far as I know if you want to change different profile you must use the FN + F2 key combination.

  You can make individual settings for each mode in standby electricity by clicking details.

• 3480CT, device not found driver Portege

  I have a problem,
  I have a laptop toshiba portege 3480CT and is not an operating system. I am trying to install win98 SE, but when it starts to install this message appears:
  device not found driver: "OEMCD001."
  Invalid device CDROM drivers selected

  : so, how can I get these drivers, the computer has only CD-ROM drive, FLOPPY No.. CDrom drive is a pcmcia drive.
  Please help me!
  :)
  I also tried to install XP pro but with bad results, it gives errors when it tries to start the windows installation...

  WHAT to do, any help much appreciated!
  Thank you

  Hello

  If you have installed WIN 98SE on the device you need Toshiba drivers and utilities.
  Win 98SE OS you install all the applications in the following order:

  Display drivers for Windows 95 (for S3M7 Savage MX/IX) V4.11.01.7006 - 7.02.88 - 01
  YAMAHA AC - XG Audio Driver for Windows 95/98SE V.4.07.1011
  Floppy disk Win98 companion W98C09
  Logitech MouseWare for Windows 95/98 V8.37 BLD246
  V5.77 - MR577ALL004 modem driver
  Driver for TEAC V.1.06t (FDD Version 1.08 t) USB floppy drive
  Driver drive disk USB for YE - DATA V.4.30 Beta
  Panning of Driver Support (panning.sys) V3.0 (included in the display driver)
  Multi Media Port Replicator IDE Driver V.1.1.2.0315 with the file catalog
  Driver NDIS for V.2.21 de MSIR3.0 (driver Win98 OBOE)
  Toshiba Fast Ether LAN adapter (Intel 82559) V.2.01
  HALLOC. EXE (included in the Toshiba utility) V2.0
  Toshiba W983480US utility
  PCMCIA. INF for Windows98SE (support ToPIC100) V1.0
  QFE Win98Gold/Win98SE QFE KB:Q239697
  QFE Shutdown QFE Q242934
  QFE DiskTsd.VXD V.4.10.2223 Q246387xx8
  NDIS QFE Q243199 QFE
  QFE Win98SE USB QFE Q241084
  Direct X 7.0
  Acrobat Reader
  The users manual PDF file
  File PDF Manuel Modem internal
  Multi Media Port Replicator manual PDF file
  Toshiba wallpaper
  MS URL security update

  For Windows 2000 / XP in this order:

  Display driver
  TVALD
  TOSHIBA Power 2 extensions
  Toshiba Utilities
  Toshiba Mobile Extensions
  Energy saving of Toshiba Display Driver
  Toshiba infrared driver
  Toshiba IDE driver
  Acrobat Reader 4.05
  Operating instructions online
  Online modem manual
  Online manual users to multimedia Port Replicator
  Audio driver
  Driver Modem
  Country select utility (included with driver modem)
  Copy Toshiba wallpaper in c:\winnt
  Apply Service Pack 1 for the system
  Activate "Show the components of the" unplug or eject hardware trayicon
  Reinstall the display driver to support the new graphik S3 chip

  All the drivers you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com/
  Please let me know if it has been successfully

  Best regards

• Max on Portege 3480CT HARD drive capacity?

  What is the hard drive of greater that I can install it on a 3480CT portege? can I write DVD with an external burner (USB 2.0)?

  Hello

  You will be very happy if someone can give you specific info on the maximum capacity of the HARD drive for this model of laptop. This info can give you a few specialist upgrade for laptop, but I think that 20 or 30 GB maybe are no problem.

  I use the external DVD burner too, but not ultra slim but desktop engraver special cardboard. I don t use USB. FireWire is much faster data transfer rates and I use the firewire port on my Satellite.

• Wk2 will not detect the HDD on Portege 3480CT

  Hi all, been tring this for 2 days now and I have no idea. I want to install win2k on 3480CT but the win2k installation does not detect the hard drive... It will detect WinXP, win98 detects...

  I have the latest version of the bios, I start to think win2k is in need of a driver for the reader, but I'm not finding.

  Help...

  As mentioned for install the W2k you n t need additional drivers.
  I also recommend the HARD whole disk formatting and delete all partitions.

  In addition, you must use an original CD of Microsoft W2k. I read on the net that some people wanted to use the copy of the CD W2k, but this CD is not bootable.

• HD in Portege 3480CT upgrade

  I have a portege 3480CT with disc 12gig running W2k
  I run the latest version of the bios 1.4
  tried to install mk1031gas 100 GB toshiba drive but get INACCESSIBLE by CAR
  The drive works fine in a desktop pc
  It OF too big to run on this machine?
  IF this is NOT the case, how can I make it work?

  Hello

  I'm sure that the HARD drive is too big for this machine. Maybe your Portege works correctly with 20 GB but 100 GB, too. Sorry, but I think there is no way to make it work.

• DRIVER WINME FOR A50 111

  Hello
  I HAVE NOTBOOK A50 111 TOSHIA AND I PLACE A NEW OPERATING SYSTEM WINDOWS ME AND I NEED DRIVERS OF WINME FOR MY NOOTBOKE AND I SEARCH THE DOWNLOAD SECTION AND DID NOT FIND ANY DRIVERS
  PLEASE SEND ME WHERE I CAN GET IT
  AND I HAVE A QUESTION CAN I DOWNLOAD THIS DRIVERS OF MANUFACTURING ORIGINAL LIKE
  FOR AC97 AUDIO FROM ANY SITE
  AND
  FOR THE INTEL SITE VQA
  AND OTHERS
  Thank you

  Hi, Faustina

  You're right about the Toshiba site, there is no drivers for WME because this model is not supported for WME. I really know why you want to install WME on this machine.

  You can try to install the drivers of sites s manufacturer but there is no guarantee that it will work properly. Try it. You'll be maybe lucky. ;)

• IBM travelstar external USB compatibility with Portege 3480CT

  Hello
  I try to use an IBM & reg travelstar in a box external usb with my Portege 3480CT running Windows 2000 (with sp4). While the disc is recognized as plug-and-play on other computers running win2k and winXP, is not recognized on my Portege, which gives an error message suggests that the drivers are missing.

  According to IBM/hitachi (which make the player), no drivers are needed and the drive should work as plug-and-play, recognized as a generic USB HDD. This happens all other computers I've tried.

  Are their compatibility problems with this drive? Or are their special all the drivers necessary to recognize this configuration on the Portege?
  Thank you
  B

  Hello

  AFAIK there is no driver required for external hard drives and they are recognized as plug-and-play. Your Portege is an old unit and there may be a problem with the USB ports. Have you checked the other USB devices?

  It is also possible that there is not enough power, and in this case, it is recommended to connect the drive using USB hub with own power supply.

  Good bye

• 3480CT: try to update BIOS fails

  Hello
  I have a CT 3480 and wanted to update the BIOS, but only the FDD USB Toshiba drive. During the reboot with BIOS disk in, the drive starts perfectly, but indicates "non-system disk error" and will not perform the update.
  Is FDD drive the culprit, or is there something that I'm not just doing?
  Concerning
  Martin

  Hello

  I don't think it's a fault of FDD USB Toshiba player.
  Can you tell me your procedure to upgrade the BIOS?
  As far as I know, you must press F12 to Flash the BIOS.

  It's a whole procedure to upgrade the BIOS for Portege 3480CT

  1 extract the zip file containing the BIOS upgrade to a formatted floppy disk (please see note below regarding the type of disk to use).
  2. make sure that the laptop is plugged into the sector.
  3. turn off the laptop.
  4. turn on the laptop with the F12 key. Press and hold until a short beep can be heard.
  5. the message "ready for the update of the BIOS. Place the BIOS update floppy in the drive and press any key when you are ready to move forward"will appear.
  6. place the floppy disk containing the BIOS upgrade in the floppy drive and press a key. FDD access will begin.
  7. When prompted by the message: "Please push the RESET switch (or turn the AC OFF power off / WE) to restart" remove the disk and press the RESET switch (if available) or turn the system off and turn it on again to restart the laptop.

  Good bye

• Portege 3480CT: Canoe DVD-> not present error message "No Disk".

  I have a Portege 3480CT (Win 98) and PA3042E - MEDIA PORT REPLICATOR 1DST. Although the DVD playback software is installed and I can't read the DVD. I tried WINDVD, POWER DVD, both for WIN 98, nothing helps. Decoder DVD software WIN 98 is also installed. If a DVD is loaded, every piece of software will return the error: "there is no disk.

  What should I do to play DVDs on my computer?

  Thank you in advance.

  Hello

  Are you using an original DVD?
  Maybe there's something wrong with the region code settings.
  If you want to play s DVD with different region the reader couldn t code recognizes the Middle!

  See also the parameter of drive letter in disk management.
  It is a port replicator, and it seems that the CD/DVD drive letter is set dynamically

• Cannot install W2K on Portege 3480CT

  On eBay, I bought a Portege 3480CT use it as a good machine to create texts out of office. But now I can not install W2K on it.

  It has an external CD drive and does not install: w2k, Linux, W98 (original)... for my favorite W2K, it says: "could not find NTLDR" (w2k) and: "media entfernen - neustart: taste druecken;

  There is no other boot device, no other disc in any location... the disc is my original one, the boot device is passed to 'boot from CD' - the system is used for W2K (there a sticker on the back, which gives me this information).

  and now I'm at the point, I have no idea how to continue.

  Is it possible to make it work again?
  Thanks in advance

  Hello

  If a "NTLDR is missing" message that this indicates that the disk is not bootable.
  Many times this is caused when the computer tries to boot from the CD-ROM or a diskette not bootable.
  In this forum, many users wanted to install the W2K on this laptop.
  First of all, you need a bootable disc.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=7187&MessageID=24896

  If you want to boot from the CD of Win98, you must first create a companion disk. See the page of the Toshiba driver for companion disk files.

  Please also see this site. Maybe this helps:
  http://www.computerhope.com/issues/ch000465.htm