Mail on El Capitan has problem with answer and respond to the

Similar Questions

• I have a problem with scrolling and typing on the computer.

  Original title: I have problems with scrolling and typinging after a minute or so without the computer trying to go in the background, any help would be great because I will to throw the mouse across the screen very soon

  as noted above, totally tired, I must right click of mouse to wake up on this page, I did it while typing grrrr big time. Help pleeeease

  Hello

  Thanks for posting your question in the Microsoft community.

  I see that you have a hard time to work with the mouse.

  1. What is the brand and model of the mouse?
  2. The problem occurs on any program or when you perform a task in a particular program?

  Try these steps and see if that solves the problem of performance of your mouse.

  Method 1:

  You can check that the mouse buttons are set correct.

  Refer to the section "Change how the mouse buttons works", from following link to learn more about the same:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Method 2:

  You can uninstall and reinstall the drivers for the mouse on your computer, to do so follow the steps mentioned below.

  a. click Start, click Control Panel , and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. in the Device Manager, look for the device under the mouse and other pointing devicesand then double-click the device name.
  c. click on the Driver tab, and then click uninstall the driver.

  d. restart the computer and it will automatically re - install the drivers of.

  Note:

  You can also update mouse drivers by visiting the manufacturer's Web site.

  See this link for more information:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know if you need help on this question or any question about Windows.

• Problems with WRT54GS and EasyLink after the addition of the Comcast Digital phone.

  I had a working network. Cable modem (Comcast), WRT54GS, 2 PCs per (an XP/SP3, a Vista Home Edition SP1), 2 cable PC laptop wireless (an XP/SP3, a Vista Home Edition SP1) and a HP OfficeJet 7210 printer (connected to WRT54GS as a network printer). Everything was going well and worked.

  Then, I added the Comcast Digital phone. Obviously, they went for a new modem cable modem cable with the phone service option. Now I can't print to the wired Vista PC OfficeJet and EasyLink displays "initializing" for too long I'll wait (5 minutes).

  Finally, I must kill EasyLink from the Task Manager. Any help or ideas appreciated!

  I solved the problem. It turns out the new modem cable and problem with EasyLink initialization were 'diversion '.

  The problem turns out to be a classic network problem! The Vista PC wired had a wrong IP address. The wireless PC XP has the printer configured with the name of network instead of the network address (IP, for example).

  When I deleted the printer on the Vista PC and added to the correct address everything worked fine.

  Apparently, the printer got a new IP address of the server on the WRT54GS after installing the new modem. In addition, it seems that Vista doesn't has not report an error of communication to a network printer, but for a direct USB connect.

• Problems with VSS and RoboHelp on the second machine

  Hi all
  
  We chose to use Visual Source Safe as our source for use with RoboHelp control tool. To build the VSS database that contains the project to help on the server, we used the version of our aid project successfully on my machine. I got no problem with it for several weeks. Everything works beautifully. Files are collected, verified and checked back with no problem.
  
  The problem is that we have been unable to someone else have been correctly set up on the team upward with the RoboHelp VSS source control. Given that we do not build the database from scratch, the way we did with mine, we try to 'get' the version of VSS on the server and place it on his machine. I guess this is the way to do it, but we don't know how. When we try to get the version in the source code control, only the top level of subject .htm are recovered, and not anything that is nested in children. Then, when attempting to open the project help on his machine, we get all sorts of errors going to "corrupt .cpd" files to 'caractΦres' to "the local version is different from the source control version" (DUH!). We say to her to get the files in RoboHelp, when we try to open the project assistance to his C drive, but it's not download them properly, and invariably RoboHelp breaks down.
  
  Anyone who has successfully used VSS with RoboHelp, and if so, how do you get a new computer with an existing RoboHelp project, which is already in VSS? I need the measurements, if possible, because it is not intuitive (or since we are just clueless).
  
  I really appreciate any help anyone can offer!
  
  Thank you!
  Lisa

  From my experience with RoboHelp and VSS, I found the following:

  Getting the initial copy of source control can be tedious, but not hard.
  Most likely, you have only the folder level higher because the "recurse" (or "recursive", I don't remember off the top of my head) check box has not been checked in vs.

• Problems with webcam and microphone on the Satellite with Windows 7

  Hello
  I installed Windows 7 on my Toshiba Satellite and all of a sudden the webcam and the microphone does not work.
  I tried to find the appropriate drivers, but I can't seem to find.

  Could someone please help?

  Best regards
  Teresa

  Hello

  The webcam software is designed by Chicony.
  This model of laptop s independent and, therefore, the use of the webcam software that has been released for other models of laptops may not be a problem.

  I recommend you the driver for Toshiba Satellite L500 series area.
  There you can download the drivers for Win 7 32 bit and 64 bit OS.

  Welcome them

• Problem with "resolution and size of the work exceeds the maximum that can be rasterized.

  Hi all

  OK, I've created a document 162,7 "x 90.6" (work plan) for a design I design. The document was created using all the flaws - I think that's where I was wrong. Illustrator is now telling me that "the combination of the size of the work and the resolution exceeds the maximum that can be rasterized" after I opened the document and when I try to add a shadow to what whatever.

  Other than vector graphics, I created in illustrator, I only have 3 180ppi and 4 300 PPI pictures tranfered just behind the camera photograpers.

  I chose:

  1 "print document" in the initial startup window.

  2. I got the size of the artboard, purge and left control the 'pixelation effects' "high (300ppi).

  I think that to let the adjustment effects of pixelization at 300ppi, where is the problem.

  What I need to create a new document or I can fix it already exists?

  Illustrator is 32-bit only and is limited to 3 GB or RAM usage, it is more a limitation to a bug.

  t has a limit to the size of a tiff file that I can export for example and you can have reached this limit.

  Try opening it in Photoshop before you start all over, and then save it in psd or tiff.

• Problem with subscription and cannot contact the support

  good night someone maybe I could help... I can do to be able to contact this company nesecito solve a problkema that I have with this subscription thank you very much and I hope that your answers... Thank you

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Problem with encoding and charset for the download of a file

  Hi guys, I have a problem and I pray for your help, I am 1000% frustrated at this point.
  
  I have a servlet that must do something and give to a log file to the end user. Coding the logic that took me about 5 minutes, the problem is that the given file shows correctly in Notepad (default application to open the txt files). I tried everything I read on the internet and absolutely nothing works.
  
  After that the challenging about 20 ways different fo do this without success, it's my actual code:
  
  Game characters def = Charset.defaultCharset ();
  OutputStreamWriter out = new OutputStreamWriter (servletOutputStream, def);
  for {(chaîne de Registre: regList)}
  out. Write (Registry + "\n");
  }
  out. Close();
  
  the page gives the user the file, I can download or open, when I open it it is the result
  
  registry1registry2registry3registry4registry5registry6registry7...
  
  and I expect:
  
  registry1
  Registry2
  registry3
  registry4
  registry5
  .
  .
  .
  
  
  If I open it with wordpad or notepad ++ the file looks fine, but I can't make this notebook it reads properly. I spent about 10 hours on it and at this point I don't know what to do, I tried Windows-1252, UTF-8, UTF-16, the default. I tried to put this enconding on the response header with no luck. Any help will be much appreciated.
  
  Thanks in advance.

  This has nothing to do with the character sets and everything to do with windows line break conventions. Windows line break convention is "\r\n", and the notebook only includes this format.

• HP n234sl: problem with drivers and information about the HP prog. compatible with windows 10

  HY,

  I have recently upgraded to Windows 10 and after that activation done a clean install of it. The pilots detected Windows itself, but there are 2 unrecognized drivers. The PCI express called like that.

  I wanted to ask you if there is a tool HP that detect all my hardware components and download the proper drivers. Because the Nvidia card, I installed myself.

  And another question, can I download old programs (such as Cyberlink, 7 zip, Hp Coolsense ect) 8.1 Windows system? (are they compatible with windows 10?)

  Thank you and best regards

  Please click the links provided which might come handy below

  http://support.HP.com/us-en/document/c04758308

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• I use word for mac and have problems with Hebrew and orientation of the text from right to left

  Hello

  I use Word for Mac on my MacBook (version 10.11). I have problems setting the orientation of the text of the Hebrew version.

  Where can I find the icon for the orientation of the text? (not like the alignment)

  It doesn't look like Word for Mac has the RTL support. See the first response to this which Hebrew fonts program works well on a mac - to write Hebrew texts or insert the Hebrew into English documents? post for some alternatives.

• First 13 items: problem with transitions and vignettes for the film menu

  I've separated the scenes in my movie with the base transition fade - to-black, which works fine when I choose the centered option. Unfortunately, when using the automatic method of filling thumbnails of scene menu, the result is an all black image of the miniatures of the scene, that the initial image for each scene is completely black.

  I tried to put the transition on the right side of the main element, which solves the problem of thumbnails on the menus of the scene, but the transition is strangely applied - he Faints, but disappears before the end of the clip of the beginning, rather than just black until the end of the first clip.

  Any ideas?

  rptrevor

  When you double click on the menu, you will see an opportunity of 'compensation' 00; 00; 00; 00 in the marker dialog box.

  You can use it to change the thumbnail display corresponding to this menu marker while leaving the menu marker in its mounting location.

  Have you explored this possibility? It works - road tested myself.

  What operating system executes your 13 items first? I ask that in case we need to enter a more specific detail linked

  for the operating system on which to run the Premiere Elements.

  We will follow to your results.

  Thank you.

  RTA

• curious problem with extrusion and rotation

  I found a curious problem with extrusion and turn into the CS6. It's not a bug, but it's a behavior that is less intuitive who is confused and sometimes painful. I think it is something that should go on the list of tasks for the devs. Someone else, right? Don't agree?

  Example:

  

  I started with a path arrow, to which I applied the effect "extrude". I then put an icon on top of the arrow and grouped in the icon and the arrow. Now, I use this icon arrow in several different parts of my design, in different orientations. I flip the arrow, the relative position of the icon and the arrow seems to pass. I believe that this is happening because when you rotate the arrow icon, Illustrator rotates both the icon and the arrow on the center of the underside of the arrow. This is because the upper side of the arrow is essentially fictitious, just an artifact of the effect of extrusion. So, even if the icon appears as if it is drawn on the upper side of the arrow, it behaves as if it is attached to the underside of the arrow. When you apply a transformation, this transformation impacts on the underside of the arrow, causing the top of offset from the icon.

  The solution would be to add an extra box to the effect of extrusion, asking if you wanted to extrusion (the way things are currently done) upwards or downwards. If you can extrude downwards, then the upper side of the arrow would be the 'real' face, those affected by the changes. You can then put a picture on the top, the arrow and the image of the group, and when you apply a transformation, the icon would remain fixed relative to the top, which would be consistent with your intuitive expectations.

  If anyone is curious to experiment with this particular example, I posted this file in Google Docs here:

  https://docs.Google.com/file/d/0B0Hoxcl5zTEtTXo5QnNsMGwwOGc/edit?USP=sharing

  It's about what you just mount the image with a transformative effect to match the extrusion.

  So basically, you apply a 3-d rotation effect to your image to match the rotation of your arrow, then you apply a transformation movement in the vertical axis to match the height of your extrusion.

  hope this helps

  https://docs.Google.com/file/d/0B4ilRoSBagc3d2w2Ylc2cWxFVjA/edit

  If you want to get real on this issue retro we only corresponding to the rotation of the arrow in the center of the extrusion, if we wanted to distort the image perfectly, the rotation should be slightly higher, but anyway, it is hardly noticeable.

• After the upgrade to El Capitan having problems with the application Mail

  Hello:

  Recently upgraded my Mac mini to El Capitan. Before the upgrade (from Mountain Lion), I got Thunderbird mail application works perfectly access my GMail account and my Hotmail account. Now, I have no problem with Hotmail and Gmail keeps asking for the password to connect to the gmail imap server. I have TBird in my laptop Ubuntu Linux and Windows too and that you have not had any problems like that. Any help to solve this problem is appreciated. Thank you.

  Try this: https://support.google.com/accounts/troubleshooter/3178296?hl=en

• Page of Yahoo mail that says 'there a screen resolution problem". A in case of problems with all stakeholders, even all the browsers. The question is Firefox!

  I have the latest version of Yahoo mail. When I click on the link "mail" of my Yahoo homepage, he directs me to a page that reads, "There is a problem of screen resolution". In the body of this page, it explains how to fix the problem. BUT, I don't have a problem with the resolution - the screen resolution should be 1024 x 600 or greater and IT IS! This only happens with YOUR browser. I have Chrome and IE, neither of which is a problem. I worked with a representative of the yahoo mail support and he explains that it IS a problem with Firefox and for raise you awareness and fix the problem - I use a Vista operating system on a computer and Windows 7 on my other computer, which has the same problem, so we KNOW for sure, it's a Firefox issue.

  I don't think that the effects of this question all those who use Firefox because I'm able to visit Yahoo Mail without any problems. I would say that to reset the zoom of the page on the page, this issue occurs on. You can do these steps go to view > Zoom > reset or press (Ctrl + 0 (zero).

• My Windows XP has problems with shlwapi.dll

  My Windows XP has problems with shlwapi.dll and there are plenty of sites to download, but they all want money, why don't misrosoft not has an answer for this problem. When I try to update to internet explorer 6 to explore 8 then the error always pops up saying: you have a problem with shlawpi.dll and he can not continue... Very very frustrating.

  In general, it is not a good idea to download dll files.   See, for example, http://pcsupport.about.com/od/findtheproblem/qt/dll-download.htm

  If you explain more in detail what your problem is, including providing the full text of the error without paraphrase, it is likely that someone in the appropriate Microsoft Answers forum will be able to help.

  Because it seems that your problem is related to Internet Explorer, you are more likely to receive help if you post in the forum Internet Explorer, where there are already many threads dealing with issues of shlwapi.dll on IE: http://answers.microsoft.com/en-us/Search/Search?SearchTerm=shlwapi&CurrentScope.ForumName=ie&CurrentScope.Filter=&askingquestion=false

  If you look through some of these threads, you can find the answer to your question without further delay.  If not (or if you just want to watch), do not forget to include not only the text of the error message, but also the version of Windows XP, you have (Home, Pro, Media Center) and its service pack (start > run > winver > OK).

  And, based on this thread - with what seems to be your exact problem - also include responses to the following questions (there no answer, certainly because the OP has NOT provided to the request for information):

  1. what application or anti-virus security suite is installed and is your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  3 is installed WinXP SP3?