Make a JSON request refresh data every minute!

Similar Questions

• I need my Vi to save only one point of data every 30 seconds

  Hello

  I have trouble getting my VI to make only one point of data every 30 seconds. I collect a couple and the temperature. If you take a look at the queue of lvm, you will see that I have two data points every 30 seconds. I want only the VI to take one. I can do this by going to the DAQ assistant and change the mode of acquisition of N samples 1-sample (on request), but if I do this I am not able to see my couple of graph in real time.  In addition the VI takes data about every 30 seconds. Is there a way I can strengthen this also?

  1. change your graph of couple to be a graph.  A graph has a history associated with him, so he keeps old values in a circular buffer for you.  A chart shows just the last thing written in it.

  2. change your sample of Compression to be 64.  It is currently set at 30, which means that you will end up with 2 samples in your data.  That's why you write 2 samples when write you it.

• materialized wiev fast refresh every minute

  Hello, I need create mv and this mv need auto fast refresh every minute.

  I first create the table 3

  first:

  CREATE TABLE 'HR '. "' EMPLOYEES '.

  (NUMBER (6.0) "EMPLOYE_ID",)

  VARCHAR2 (20 BYTE) "FIRST NAME",

  VARCHAR2 (25 BYTE) "NAME."

  VARCHAR2 (25 BYTE) "E-MAIL."

  "PHONE_NUMBER" VARCHAR2 (20 BYTE),

  'HIRE_DATE' DATE,

  "JOB_ID' VARCHAR2 (10 BYTE),

  "SALARY" NUMBER (8,2).

  NUMBER (2.2) "COMMISSION_PCT."

  NUMBER (6.0) "MANAGER_ID."

  "DEPARTMENT_ID" NUMBER (4.0)

  )

  Second:

  CREATE TABLE 'HR '. "" DEPARTMENTS. "

  ("DEPARTMENT_ID" NUMBER (4,0),)

  VARCHAR2 (30 BYTE) "DEPARTMENT_NAME."

  NUMBER (6.0) "MANAGER_ID."

  NUMBER (4,0) 'LOCATION_ID '.

  )

  Thirdly:

  CREATE TABLE 'HR '. "' LOCATIONS '.

  (NUMBER (4,0) 'LOCATION_ID',)

  'ADRESSE_RUE' VARCHAR2 (40 BYTE),

  "ZIP_CODE" VARCHAR2 (12-BYTE),

  VARCHAR2 (30 BYTE) 'CITY ',.

  VARCHAR2 (25 BYTE) "STATE_PROVINCE"

  'COUNTRY_ID' TANK (2 BYTES)

  )

  can I create mv newspaper with rowid, become I refresh mv with quick setting

  create log view materialized on EMPLOYEES with rowid.

  create log view materialized on departments with rowid.

  create log view materialized on the premises with rowid.

  Finally, I create mv with fast refresh method

  CREATE THE TEST_MV_1 MATERIALIZED VIEW

  REFRESH QUICKLY START WITH sysdate + 0 NEXT (sysdate + 1/1440)

  AS

  Select EMPLOYEES. EMPLOYEE_id

  departments.department_id

  locations.location_id

  EMPLOYEES.rowid EMPLOYEES

  departments.rowid departments

  locations.rowid locations

  EMPLOYEES

  ministries

  places

  where departments.manager_id (+) = EMPLOYEES. EMPLOYEE_ID

  and departments.location_id = locations.location_id (+);

  now I have my mv and I'm seeing or my mv running

  SELECT

  table_name,

  TO_CHAR (LAST_REFRESH,'yyyy-MM-DD HH24:MI:SS) LAST_REFRESH

  , to_char (sysdate,'yyyy-MM-DD HH24:MI:SS) sys_date

  -Count (Name)

  Of all_snapshots

  where table_name = 'TEST_MV_1 '.

  I get:

  TABLE-NAME LAST_REFRESH SYS_DATE

  ------------------------------ ------------------- -------------------

  TEST_MV_1 2015-09-01 17:56:10-2015-09-01 17:57:02

  After 2 min

  SELECT

  table_name,

  TO_CHAR (LAST_REFRESH,'yyyy-MM-DD HH24:MI:SS) LAST_REFRESH

  , to_char (sysdate,'yyyy-MM-DD HH24:MI:SS) sys_date

  -Count (Name)

  Of all_snapshots

  where table_name = 'TEST_MV_1 '.

  TABLE-NAME LAST_REFRESH SYS_DATE

  ------------------------------ ------------------- -------------------

  TEST_MV_1 2015-09-01 17:58:10 2015-09-01 17:59:05

  then I insert the new record in the table

  Insert employees

  (EMPLOYE_ID,

  FIRST NAME,

  LAST_NAME,

  E-mail

  PHONE_NUMBER,

  HIRE_DATE,

  JOB_ID,

  SALARY,

  COMMISSION_PCT,

  MANAGER_ID,

  DEPARTMENT_ID)

  values

  (515, 'Jennifer', 'Whalen', 'JWHALEN', '515.123.4444', to_date('1987.09.17','yyyy.mm.dd'), 'AD_ASST', null, 101, 10, 24000)

  /

  Commit

  /

  1 row inserted.

  Validation complete.

  and check again my last_refresh mv

  SELECT

  table_name,

  TO_CHAR (LAST_REFRESH,'yyyy-MM-DD HH24:MI:SS) LAST_REFRESH

  , to_char (sysdate,'yyyy-MM-DD HH24:MI:SS) sys_date

  -Count (Name)

  Of all_snapshots

  where table_name = 'TEST_MV_1 '.

  TABLE-NAME LAST_REFRESH SYS_DATE

  ------------------------------ ------------------- -------------------

  TEST_MV_1 2015-09-01 17:59:10 -2015-09-01 17:59:30

  affter 2 min

  TABLE-NAME LAST_REFRESH SYS_DATE

  ------------------------------ ------------------- -------------------

  TEST_MV_1 2015-09-01 17:59:10 -2015-09-01 18:02:12

  and when I go to data mv I don't see my new data

  Select * from TEST_MV_1

  where EMPLOYEE_ID = 515

  no selected line

  Maybe someone can help me? I'm two weeks try fix it and lost all hope

  
  

  I find:

  My mv refreshed, but when I insert new data he collapsed
  
  

  I ' am am ansver: when I try to refresh the MV with fuction

  DBMS_REFRESH. Refresh (the "HO".) "TEST_MV_1" ');

  I get the error

  ORA-12008: error path refresh materialized view

  ORA-00942: table or view does not exist

  ORA-06512: at "SYS." DBMS_SNAPSHOT", line 2563

  ORA-06512: at "SYS." DBMS_SNAPSHOT", line 2776

  ORA-06512: at "SYS." DBMS_IREFRESH', line 685

  ORA-06512: at "SYS." DBMS_REFRESH", line 195

  ORA-06512: at line 2

  00000 - "error in the path of refresh materialized view.

  * Cause: Table SNAP$ _ reads lines of sight

  MVIEW$ _, which is a view of the main table

  (the master can be on a remote site).  Any

  error in this way will cause this error when updating.

  For updates of the Rapids, the table. MLOG$ _

  is also referenced.

  * Action: Examine the other messages on the stack to find the problem.

  See if SNAP objects $ _, MVIEW$ _,.

  . @, . MLOG$ _@.

  There is always.

  so I think that I can not select the HR data. MLOG$ _EMPLOYEES and another newspaper in the HR schema table

  When I try to select * HR. MLOG$ _EMPLOYEES I get table emty (schema HO)

  so I don't understand how I can not update quick MV when I log empty.

  I therefore ask my db admin for more privileges to select the MV journal table

  I do not know what admin Preobrajensky give to my diet, but it's a job.

  dude thanks for the help

• Vista icons in windows Explorer refreshes every minute or so, how fix?

  Every minute or so icons start refreshing in Explorer. I tried increasing the icon hidden in the registry, the removal of "IconChache.db", all to nothing is (apart from reinstalling my OS). Whenever the icons updated performance decreases significantly. I ran antivirus (Avast free with Microsoft Security Essentials) scans, everything came without any problem. On another note, Explorer sometimes crashes when opening an image.

  Hello

  Have you tried system restore?

  If the system restore is not enough, you can create a new user account and check.
  To create a user account:
  a. to open user accounts, click the Start button, select Control Panel, click user accounts and parental controlsand then click user accounts.
  b. click Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click on create a new account.
  d. type the name that you want to assign to the user account, click an account type, and then click create an account.
  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
  If the computer works well in the new user account, you may have corrupted profile.
  Here is the link totroulbleshoot a corrupted profile, you can follow the steps mentioned in the link.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
   
   
   
   

• How can I make Firefox reload pages every minute?

  I work in a computer online store. A minute can mean the loss of money if a customer is looking forward.
  So, how can I put my Firefox to reload the page every minute automatically?

  See this add-on:
  https://addons.Mozilla.org/en-us/Firefox/addon/ReloadEvery/

• Don't know what updates I need through the center of update. And get the following error message popup every minute, wuauclt.exe.

  Please, I beg you, help me please I need this computer for my work and am already 1 day behind by logging into my company to do my job (I have Windows XP Version 2002 service pack 2)

  Not only can't update windows via the update enter but an error message continues to appear every minute that used to go.

  It says "wuauclt.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »

  If I click on th does not send or send error report this message keeps popping up. When I click the to see what data link, he said:

  "Error signature szAppName: wuauclt.exe szAppVer: 7.4.7600.226 szModName: szModVer esent.dll: 5.12600.2180 offset: 005d 424 '  Details of the declaration: this error report includes: observation information covers the status of wuauclt.exe when the problem occurred, the operating system version and used hardware and Protocol address Internet (IP) of your computer. etc, etc, etc.

  When I click on info tech I get

  Content error report the following files should be included in this error report: C:\DOCUME~1\Owner\ LOCALS~1\Temp\WER189a.dir00\wuauclt.exe.mdmp C:\DOCUME~1\Owner\ LOCALS~1\Temp\WER189a.dir00\appcompat.txt WER189a the number changes each time.

  So far, I ran McAfee, Microsoft Security Essentials and it keeps popping up. I still do not know what updates I need through the Update Center but could manually go and get service pack 3 by itself. I need to be able to use the center of update and do not have this message continues to flow upward.

  What I do?   Thank you so much Corina

  Hello

   

   

  Let us make the below listed methods and check if we still get the error message.

   

  Method 1.

  I would ask you to reset the Windows UPdate components and check if you still get this error message.

  Click the Fix It button in the article below to do it automatically or you can do it manually as wel. For more information, refer to the article below.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

   

   

  Method 2.
  If the error still persists please provide us with the error log:
  Type eventvwr.msc/s in the address bar.
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

   

  Method 3.

  I would also recommend to install the Windows Update Agent to manage the updates on your computer.

  Download and install the Windows Update Agent to manage updates for your computer.
  Follow the link below to download and install Windows Update Agent:
  http://support.Microsoft.com/kb/949104

  
  Please let us know if this helps you resolve the problem or if assistance is needed.

  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite A200-1FL: cooler starts and stops every minute only with battery

  Hello.

  I just bought an A200-1FL and I test these days. I noticed that the cooler starts and stops every minute about when I use it only with the battery.

  Disconnected from the power, even if I do not have too much, just browse the Internet. Is this normal?

  If I work with trendy food, the cooler makes no noise.

  Thank you.

  David

  Hello David

  Do you also have it tested with different profiles in power options (balanced, power saver, high performance)?

• Recording of data every hour, labview stops responding when the program stopped

  Hello. I'm doing a labview program to read the data and recording to a PDM file every hour for as long as it runs. First of all, I wanted to test it on every 15 minutes to work the bugs how. I made the attached VI and simulated data. It works fine but when I press the stop button to stop the program, the mouse cursor becomes the "wait cursor" and it remains like that until the program says "(ne répond pas) ' and then it crashes." Needless to say that the data is not recorded or corrupt. Do not do this with shorter time intervals (say, record data every 15 seconds). Is the long time period why its happening? Is there a better way to address the issue? Thank you!

  
  

• How to measure voltage every minute

  Hi all

  Currently, I'm new to labview and I'm taking steps of timed voltage.  Here's what I'm trying to do;

  I'm using labview 2010 and I am currently taking readings of temperature and moisture in sync with each other.  To measure the temperature, I'm using a cDaq mudule 9213, humiduty I am in using the voltage of the module 9234 and converting using the temperature and pressure of my moisture sensor.

  Now what I want to do is take the voltage and temperature say every minute or 30 seconds, but my buffer fills based on the readings of voltage and gives me an error or the table accepts the values of what im assuming is the buffer, one by one, rather than enter the data of the current module.

  My real question here is how to take measurements of voltage current every 30 seconds?

  Thanks for any advice.

  
  

• Will not empty the messages in my Outbox and keep messages to re-mailed every minute.

  Outbox will not be empty

  Will not empty the messages in my Outbox and keep messages to re-mailed every minute.

  You don't have to tell us what e-mail program use. If it's Outlook Express, then this is the answer.

  You have apparent dbx file corruption.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• PC goes in / lock user every minute switch

  Computer runs very slowly and screen saver/lock/switch user cycles every minute.

  Do it the less shrunk down to the fact that some programs are reset timeout to 1 minute as well as screen saver automatically check the "logon screen" option.  When I change this setting, then click on apply or OK, he immediately returned to 1 minute and switch 'on' the logon screen display option.
  This is in regards to my dad's computer.  He has recently 'installed an update of a popup"and did before causing viruses.  The only problem is that AVG is executed and updated (and was when he made it) and a full AVG scan came up with nothing.  I am running Microsoft Safety Scanner in safe mode - that reminds me to mention that this problem occurs in safe mode as well (same program apparently running and changing this setting).
  Thoughts?
  Thank you

  Hi mpccmd,

  1. did you of recent changes on the system?

  Method 1:

  You can try to change the registry settings and check if it helps.

  To open Registly follow the steps below:

  a.Click a.Click on start, type regedit in start search, and then press ENTER.

  b.Navigate to HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\Currentversion\

  c.Verify the following entries have the value default values.

  HKEY_CURRENT_USER\Control Panel\Desktop

  ScreenSaverActive = 1

  ScreenSaverIsSecure = 0

  ScreenSaverTimeOut = time in seconds

  SCRNSAVE. EXE = points to the location of the screen saver

  d. exit Registry and retstart the computer.

  Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

  Method 2:

  You can also check that the problem occurs in the new user account.

  Create a user account

  If the problem does not occur, then check out the following link and follow the steps to repair the corrupted user profile:

  Difficulty of a corrupted user profile

  2nd number

  1 update you tried to install?

  2. What is the result of the Microsoft safety scanner?

  You can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• 'Root@127.0.0.1 user connected' every minute?

  Hello

  We observe that ESXi 2 5 hosts in the same cluster (we have only 2 ESXi hosts in this Cluster) get the following message every minute:

  [email protected] connected user

  Root user is disconnected

  Host of ESXi and vCenter Server are the latest version.  Also, we get this message in other clusters of ESXi 5 hosts.

  That 2 ESXi hosts run on IBM with the last CIM IBM server installed.

  Your opinion is requested.

  Thank you

  It has been my experience with IBM hosts

  http://www.vnoob.com/2013/04/constant-root-logins-to-IBM-ESXi-hosts/

• Tables that stores every minute in 24 hours

  Dear all,
  
  I need to create a table/query that returns information every minutes within 24 hours. For example, the query or table will return the information like this:
  
  05/04/2010 12:00
  05/04/2010 12:01
  05/04/2010-12:02
  05/04/2010-12:03
  05/04/2010-12:04
  05/04/2010-12:05
  .
  .
  .
  .
  .
  so on until
  05/04/2010 23:55
  
  Please, help me to create this table or write such a request.
  
  Kind regards
  Imran

  alter session set nls_date_format='dd-mon-yyyy hh24:mi:ss';
  
  select to_date('5-MAY-2010 00:00:00','dd-mon-yyyy hh24:mi:ss') + (level-1)/(24*60) from dual connect by level <=1440;
  

• Authd: copy_rights: _server_authorize failed to repeat every minute in Journal

  "authd: copy_rights: _server_authorize failed" is repeated in the newspaper every minute. How do I know what it's complaining about to solve it?

  What functional problem you have, if any? Log messages are not a problem in itself.

• Need help disabled account I reset every minutes

  What should I do if my account is disabled I can't reset my password every minute

  Contact Apple Customer Service and support

  1. Apple Store Customer Service at the the 1-800-676-2775 or see the online help for more information.
  2. Contact product support and tech: Contacting Apple for support and service , including the numbers of international calls.

  Apple ID is disabled - Club Apple

  Apple ID - alert "this identifier Apple has been disabled for security reasons" is displayed