Make an object blink or flash?

Similar Questions

• Make an object reference to Flash movieClips?

  I'm having a problem control flash movieClips in my project.
  
  Sprite (2). #_tab & clipList [1] .gotoAndStop (2)
  
  The clips are in an animation flash sprite channel 2 occupancy and are named "_tab1" to "tab50". I assign item number in a list. and that's the sticking point because it is not a valid object to the movieClips reference.
  
  Can someone point me in the right direction?
  
  
  Thank you very much

  Solved.
  Here is the code, can be useful to someone in the future:

  clipVar = "_tab" & save [1]
  controlClip = getvariable (sprite (2), clipVar, False)
  -set ilk (controlClip)
  controlClip.goToAndStop (2)

  The getVariable line converts the string of clipVar one referring flashObject.

• Timer to have labels blink of flash as a trailer

  Hello

  Trying to get labels blink or Flash on the screen, once, a little like movies trailer.   I was thinking a timer to control the sequence but my timer should start at the beginning of the program, and nothing seems to work.  I noticed the timerevent on the label control, but do not really understand?  Could someone tell me if I'm on the right track with this idea of timer or if I do something else?

  Take a look at QTimer, you can use it to change the opacity of a label to make it look like its flashing. Implicit animations on the property will make smooth transition

• How to make an object out of the screen?

  Hello everyone!

  I create a game introduction with Flash pro CS6 and here is my problem.

  I want an object in my animation to exit the screen, but I don't know how to do it.

  Is there for example, that a way of defined work area, so that when I do something out of this area, it does not appear in my final animation (regardless of the format, .avi, .mov, spritesheets...) or may be "cut" (if I make my object inside the arear half-and-half work outside)?

  Is there another way to do this?

  Thank you!

  With the help of a mask can be a way.

• Can I make a password reset the flash drive to reset the password on my computer dell laptop?

  OT: reset password

  can I make a password reset the flash drive to reset the password on my computer dell laptop?

  Yes here's how:

  http://www.Dummies.com/how-to/content/how-to-create-a-password-reset-disk-for-Windows-81.html

• How to make the object again during the camera movement

  How to make an object are still on a table or a surface while the camera moves?

  I think that to use the path of motion usually but the problem is theres not really a point in the clip that follows well but I know of that other methods are out there... I don't know their

  Keyframe manually there.

  Mylenium

• How to export a PDF file to make nonprinting objects show but don't print not AND hyperlinks on the top of the page work at the same time?

  Firstly - I work in InDesign CC 2015.

  My problem is, I had this 10 page document, which, on every page, shows an object that must be in PDF format - but do not print. I made this object into a button and unchecked "Printable". On top of this object, I made 10 hyperlinks (separate layer) that point to the page 1-10.

  When you export the document and I use the interactive PDF format , works ' show nonprinting object but do not print ' well, BUT hyperlinks don't. If I uncheck the "layer of nonprinting objects" in the file PDF, then hyperlinks work, but the problem now is that the nonprinting objects are invisible...

  When you export the document and I use a PDF to print the "unprintable object show but do not print" does not work BUT the hyperlinks don't...

  I put hyperlinks to post a link to pages and also tried the link to the anchor text. No difference.

  So my question is: How to export a PDF file to make nonprinting objects show but don't print not AND hyperlinks on the top of the page work at the same time?

  Thank you

  Mette from Denmark

  I swapped my links to the buttons - AND NOW IT WORKS; (o)

• If make it my video it flashes yellow and Red logos added. My computer is Mac...

  If make it my video it flashes yellow and Red logos added. My computer is Mac...

  Thanks, Neil

  I upgraded my Mac OS El Capitan and now everything was normal again

• How to make an object to rotate when it moves up and down or left and right of the key to the other?

  How to make an object to rotate when it moves up and down or left and right of the key to the other?

  Just animate the rotation property, you animate the position property of the same way.  Very easy.

• How to make an object follow the mouseX when clicked on

  How to make an object follow the mouseX if clicked? Help, please.

  You should think it through - your code does not match your very simple explanation of what you say, it should do so, and it should... click an element and follow the mouse.

  A game loop (ENTER_FRAME) could work, but in this case it wastes unnecessary treatment if the mouse does not move.  And in your code example, it does not expect the clicks.

  Use a MOUSE_MOVE instead of an ENTER_FRAME event listener.  Inside of the event by clicking on the handler function is where you must be defined the MOUSE_MOVE listener.  The MOUSE_MOVE listener Manager is where you assign rock1Cnt.x = mouseX.

  public void Main (): void {}

  rock1Cnt.addEventListener (MouseEvent.CLICK, mouseClickHandler);

  }

  private void mouseClickHandler(e:MouseEvent):void {}

  stage.addEventListener (Event.MOUSE_MOVE, followMouse);

  }

  private void followMouse(e:MouseEvent):void {}

  rock1Cnt.x = mouseX

  }

• How to make an object on the master always appear in front on my pages?

  I can't seem to find a way to make an object on my master to always appear in front on my pages. I watched a video on lynda.com muse essentials and it says to select the master then select the object, then go to the tab object in the menu and select move to which I did and it just shows a greyed out layer1, on video, he showed moveto > master forefront

  Thank you

  Morgan

  Refer to a similar thread here - http://forums.adobe.com/message/5581528.

  You just need to move the content of your master page to the top layer of most in the layers panel. And the content of the pages of content in the other layers to be able to manage easily. This shoud keep the contents of the master page at the top.

  The option "move to" is abandoned since we launched a workflow overall better to arrange the objects using layers - http://helpx.adobe.com/muse/tutorials/layers-muse.html.

  Thank you

  Vinayak

• How can I make java objects in a schema

  Hello.. good afternoon everyone...
  
  How can I make java objects from a database schema?
  
  Assume that the credentials are scott/tiger@db1
  
  One other thing is that... I do cmd (command prompt) because there is no developer plsql or sqldeveloper installed in the machine.
  
  PLSS help... Thanks in advance...

  Hello
  That's ok. This run just to try

  DROP JAVA SOURCE "javaclass1";

  Kind regards
  Simma...

• Passing object XML in Flash to ASP.

  Hi guys...
  
  Is it possible to pass a Variable of object/array of Flash XML to ASP?
  
  If it is, how to obtain and analyze the object/table XML variable in the ASP file?
  
  I intend to go with ASP to create an external XML file, and then I'll feed XML to Falsh data.
  Incase of additions or Corrections in the data, once again I'll pass the details of flash to ASP and replace the existing XML file.
  
  Please help me...
  
  Thanks in advance...
  
  - ****
  
  
  
  Thanks in advance...
  
  - ****

  The XML in Flash class has multiple ways to send data to pages of script on the server side. . Send(),. sendAndLoad(), etc..

  If you want the data sent in the form of XML object and not as a pair key/value as a form post, check if you set the contentType to "text/XML" before using the send() or sendAndLoad() controls.

  Read the XML code directly in ASP will require you to use the Request object.

  Set xml_dom = Server.CreateObject ("MSXML2. DOMDocument')
  xml_dom. Load (request)

  Tim

• How to make the object move like mice

  I am now getting a... augmented reality project and I used flash to do this system... my system Maker use face detection and the object as a mouse cursor... means the object moves when the face moves in front of the camera... now I can do it... but I can't do this movement of the object in the frame of the flash... move only in the frame... now I would like to ask how I want to object to move out of the frame... like going inside the computer and can click on any folder (average control the computer as mouse). can someone help me?

  You cannot control the mouse of the user outside the flash scene (thankfully), and I don't think you can detect the user with their mouse off the stage with a not installed (that is to say, projector or air) flash application.

• How make an object appear at a specific time in the timeline?

  I know this is a stupidly simple question but I can't do this work.

  I want to put more than one symbol on the stage at the same time, but I want them to appear at different times.

  Whenever I have paste the symbol on the stage, however, it always seems at the start of playback.

  I have the image auto key button checked, but it seems to make no difference to the result.

  This frustrated beginner, you will appreciate any help please. I'm used to Flash, where you place a blank Keyframe on the scene then paste your object right there in the script simply.

  1. Select the item.
  2. Move the playhead where you want to raise objection to appear
  3. Select the display on the top left panel and choose from the list - what is before the will have screen. You can enable and then view or disable as needed.