HP laserjet 200 m251nw

Similar Questions

• LASERJET 200 M251NW: LASRJET m251nw 200 Driver WINDOWS 7

  I have a printer LaserJet 200 M251nw, I've had for several years.  I recently bought a new computer and am running windows 7 64-bit, however; I can't find the drivers for the printer anywhere.  I don't have the CD so that is not an option.  Can someone help me please?

  Thank you

  Steven

  Hi Steven,

  Download and install the latest version of the software below:

  http://ftp.HP.com/pub/softlib/software13/COL44388/LJ-107657-3/LJ-Pro-200-Color-M251-Full-solution_15188.exe

  Note: for a USB connection, do not plug the cable until the installation invites you to do so.

  Kind regards

  Shlomi

• Web Service with Laserjet 200 M251nw connection error

  I searched other messages here and tried everything.  I can't get the Web Service works with this printer.  It works fine connected locally.  It has a fixed local IP address.   I put the printer in the DMZ router.  I put the DNS settings to Google's servers.  I checked the firmware, and this is the last 20121026.

  Enable Web Services.  Then he comes back and says success is waiting for the briefing, but he never comes.  I go to the HP ePrint tab and I see it has an e-mail address assigned, but when I ask another information paper, the 'connection error' returns.  I sent by email to the address and nothing happens.

  I bought my son a chromebook for Christmas and I would like for him to be able to print to it.  Help!

  I finally got this working.   I ended up buying a new router, but I was ready to be upgraded in all cases.  It works very well with this new router (D-Link DIR - 860L).

  Before I had a router ASUS RT - N16 running DD - WRT, but I loaded the latest firmware ASUS when I couldn't get this to work.  It did not matter.  The router seems to hang after the registration of the printer with another firmware, so I decided it was the router as well as the HP support line.

  Now everything works such as documented.

• LaserJet Pro 200 m251nw: how to disable these pages printing pesky notification?

  I just bought the LaserJet Pro 200 m251nw to help with homeschooling and coupon printing. A big HUGE machine so far, one small complaint... whenever I have do something or something (ie: plan a printout of the spreadsheet on an app) Springs this page full color printing. I don't want to lose my ink telling me I just do what I know already! Can I disable it somehow? Thanks in advance!

  Hi @g33kyg1rl

  Welcome to the Forums of HP's Support.  I see you want to learn how to turn off notifications in HP connected for your Laserjet M251nw printer.

  Please follow the steps listed below:

  1. Connect to your HP account connected, which will take you to the Welcome screen.
     
     
  2. Please click the drop down arrow next to 'Settings' menu and choose 'Notifications '.
     
     
  3. If please check or clear the parameters of notifications that you prefer and then click on "save changes".
     
     

  Please let me know how it turns out.

• LaserJet Pro 200 m251nw: Laser Jet Pro 200 color ink bleed on black and white page after some use

  I print mostly black and white documents. I recently had 2 ink color of defamation in the pages that are supposed to be just in black and white printed. The first was the magenta, and it might discolor the entire page. The second was yellow, and it could fade just the left and right margins. It was two cartridges to Cartridge World, and they have done very well for some time after the installation or always had plenty of ink left when this problem occurred. The manager at Cartridge World has estimated that perhaps the part of the waste of the cartridge has been complete over time and flees to the ink. He said that for most black and white print still causes the drum on the cartridges of color to turn and empty the little ink in waste room. His suggestion was to get a second monochrome printer for most usage of my impression and just this HP product when the color is required. Who is? Other suggestions? If I replace the suspicious cartridges, print returns to normal, at least for a while.

  Hi @la1959,

  Welcome to the HP Forums!

  I see that your HP LaserJet Pro 200 M251nw, color of ink smear on black and white page after some use. I'm happy to help with this problem!

  According to the website of Cartridge World, http://www.cartridgeworld.com, it seems to me that these cartridges are rebuilt (refills). And, the information in this guide, can I refill the ink in my HP ink cartridge? States:

  Yes, you can. But what do you want? QualityLogic, one of the organizations of quality foremost in the world, has tested the performance of HP refurbished vs brand inkjet print cartridges (filled). Results: original HP inkjet cartridges ink far surpassed refills in print quality and reliability of printing.

• LaserJet Pro M251nw color 200: Wifi turned off but still broadcasting

  Hello

  First, forgive my English.

  I have a HP LaserJet Pro 200 M251nw color, it has a capacity of wifi. Because the printer is connected with a cable ethernet to my router, I don't think that he had to use the wifi built into the printer.

  Thing is, when if I disable the wifi of the printer, and even if I disable "wifi direct to print", I can still see the SSID of the printer on my devices House (200 HP-Print-a6-LaserJet color).

  I looked on the forum and I tried the 'factory reset' turn, unplug the printer and taken, wait 15 seconds... etc. It did not work. I also installed the latest firmware.

  Any help would be greatly appreciated! :-)

  Hello revlib,

  Welcome to the Forums of HP Support!

  Turn off the wireless directly on Color LaserJet Pro 200 M251nw should have disabled the SSID broadcast. Since the display before disabling has not resolved, try the built-in webserver (EWS).

  To access the built-in Web server, you will need to enter the IP address for the M251nw in the address bar of your web browser. The IP address may be collected by touching the Setup program () > reports > Network Summary.

  Once in the SAP, click on network > wireless direct configuration > select and apply.

  

  Let me know if this has help

• HP LaserJet 200 color M251nw: delete the print job?

  This should be very simple, but my grandma brain can't seem to find where to delete a print job from the printer.  Someone at - it help him?

  HP LaserJet 200 color M251nw with Mac OS X 10.10 Yosemite

  Thank you!

  Cindy S.

  There is nothing like you have had on the inkjet.  LaserJet is very fast that so generally they do not need store work as they are printed as they are sent and receive jobs one at a time and sometimes hold jobs in memory according to the size and the number of jobs received at the same time.  Only way to cancel is to hit labour to cancel it or the 'X' button depending on the model.  Storage of the work is available on some LaserJet of top-level with HDD storage, control and retrievel of jobs, but most of the time with the LaserJet you do not have this option.  Printers large format HP also have the possibility to store jobs (location and nesting), change the print order, etc., but again, what are printers with hard and special drivers built into the software to handle these tasks.

• HP Laserjet Pro 200 m251nw: I've got streaks printing on laserjet 200.

  All of a sudden, I have red streaks, printing on the right side of my documents. I tried using the cleaning page and it doesn't seem to help. I also have small black dots in various parts of the document which keep appearing on my documents. Cleaning that does not either.

  It seems to be a residue of red on the sponge roll just before the paper out of the printer. How can we clean this roller or must it be replaced to correct? I used my vacuumn to try to clean it up, but it doesn't do any good.

  Need help.

  Hey @AlaskaMariner,

  Welcome to the Forums of HP Support!

  I understand that you have a problem of magenta print quality printing of your color HP LaserJet Pro 200 M251nw of the printer. I would like to help you to solve this problem today. Thanks for the troubleshooting steps you have already tried before reaching out for support, including.

  On this model of printer there no zones in the product that you can clean it manually. The only method supported this printer paper path cleaning and area of the cartridge is running the cleaning page. You may need to run the cleaning a few times page to fix this.

  Sometimes red streaks can be caused by a low toner cartridge. When toner is low, it can gather in some areas inside the cartridge and create a "streak". I can have you hold the cartridge by the sides and shake it gently from left to right to redistribute the toner. Once the cartridge has been shaken, reinstall the cartridge. Once your cartridge is re-installed, please test print to see if the problem of dragging is still happening.

  If the problem persists you can please click here for the steps of quality supported by your printer. "Once the document of support opens please run through the steps to"check toner cartridge status"", "make the diagnosis of additional print quality" and "inspect the drum unit for damage".

  If the quality issue persists you may need to try a new HP authentic to verify whether this problem is caused by a magenta cartridge faulty cartridge or the printer.

  The black dots that you see are often caused by a dirty paper path roller or fuser on your printer number. As mentioned previously, the only way to solve a dirty paper path would be to run several pages of cleaning. A defective fuser unit would lead to a replacement of the entire unit.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Windows 8.1 Surface RT and LaserJet Pro 200 (M251nw)

  Hello

  I just got today the printer (Color LaserJet Pro 200, M251nw).  I can't find the driver for Windows 8.1 RT.  Can you point me to a place I can download the driver from the RT?  The compatibility of Microsoft site says it's compatible...

  Thank you!

  Stacey

  @Stacey_CA

  The RT surface of windows is a basic tablet arm and use the drivers included in your operating system (in-os drivers). Please use the document below to help you to install the driver that is included in your operating system. You don't need to download anything.

  I install the driver included in windows 8.1

• HP LaserJet 200 color M251nw: 200 Laserjet color m251nw in paper

  Hello

  I have the printer configured above as a WSD printer on ethernet and shared on a Server Server R2 2012. The printer displays no problem, I can print the internal reports and diag pages. However, the driver on the server said 'in paper' and obviously does not in any one of the connected computers print.  The print driver is the "HP LaserJet 200 color M251 PCL6 driver class ' version 6.3.9600.17415.  I've updated the firmware to the last 20150212.  The printer has been installed a few months there and it worked very well at the start. Any thoughts?

  I ended up changing the printer port on the server of WSD for IP and that seemed to solve it.  I've never had good luck with the WSD printer ports.

• Color HP Laserjet Pro 200 M251: HP Laserjet Pro 200 M251nw print pdf with OffBeat foot

  Printing documents PFD with the quirky footer al the way to the top.

  Print the pdf as image only pages, then the foot rest where it belongs.

  Hi @Martinkoopman,

  Welcome to the Forums of HP Support! I see when you print pdf documents to your HP LaserJet Pro M251nw Color it prints with the footer moved all the way to the top.  If you print as an image only it remains where it requires.

  1. what program you are using to print PDF files from?

  2 have you tried to update the program?

  3. this happens in all programs or just one?

  I would like to run you HP print and scan doctor > www.hp.com/go/tools- it was designed by HP to offer users troubleshooting and characteristics of fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  What are the results? I'll watch for your reply.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution". If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say thanks for my effort to help, click on the "Thumbs up" to give me a "Bravo".

• Configuration of scan file on HP LaserJet 200 colorMFP M276nw

  Hello

  I'm trying to set up my printer to scan to a network folder.

  HP LaserJet 200 colorMFP M276nw

  OSX 10.9.4

  WLAN (printer and office on the same network)

  Here's the problem; No matter what I try, I can't have the printer to scan directly to a network folder.

  When you test the connection I get either the ' invalid password or username "or the error"unable to connect to the network folder.

  It seems that the biggest problem is the printer in the right network folder referring.

  I shared the folder, but I can't get a valid path name, that apparently.

  Show folder properties: / Users/vdlely/Dropbox/max verhuur/Scans

  Obviously, this is not complete; I need to add the location of the machine, such as: //iMac-van-AJ/Users/vdlely/Dropbox/max verhuur/Scans right?

  No matter what combination I try, nothing works. I used the name of the computer, IP, with and without login etc etc.

  What is the correct path in my case?

  It would be MUCH easier if you have added a simple browser to navigate to the correct location.

  Please help me to set up right.

  Hi @Aernoud,

  I see by your post that you are having problems for parsing of the configuration of the network folder. I can help you with this.

  I have provided a document to configure network scanning.

  How to perform a scan: from the control panel (including the Scan to Email, in PDF format, and to a network folder).

  Please try the following steps:
  
  1. create a new folder on your computer.
  
  2. right-click (CTRL left click if you use the keyboard of the Mac) and select read.
  
  3. unlock the screen, set all term read/write &, located under the share permissions &.
  
  4. enter in System Preferences > sharing, then select, sharing files in the left bar.
  
  5. click on the Options button, mark the share files and folders using SMB (Windows) and click done.
  
  6. under shared folders, click the sign more and select the configured folder.
  
  7. ensure that "everyone" permissions are set to read & write under the list of users as well.
  
  8. you will see the IP at the top of this screen, make a note to configure the EWS page.

  I think that in consequence of this model of path, you should be able to implement.
  
  Name of the computer or IP address/Shared-folder-name of the computer

  or

  -The computer name or IP name of the computer-folder-address\Shared

  Find out what the name of the computer as follows:
  Go to the Apple/Mac/More report information software/system about / click on the left side on the right side, it should show the name of the computer.

  NOTE: The folder must already exist. You cannot create the folder in the built-in Web server.

  To find the path of the folder where the scanned images are saved, hold CTRL and click on new folder
  created / click on get info/verify shared folder/then copy it to the folder path.

  User name - the name that you use to connect to the computer.
  
  Password: the password allows you to connect to the computer.

  Please let me know if it worked.

  Thank you.

• LaserJet 200 M251n: Cold RESET hp laserjet color 200 M251n

  Just got a new HP Laserjet 200 M251n color printer and managed to misconfigure the network settings.  This printer is the touchscreen LCD (not).

  The manual suggests going to the Service of the LCD menu then factory reset, but the LCD indicate "Disabled Menus" and I put the password on it via the web interface before losing the connection with it.

  How can I please I have a cold NVRAM factory reset?

  Hello

  Please check your MGS private for the steps.

• MFP HP Laserjet 200: can't see the function scan on HP Laserjet 200 from my Mac.

  I am able to see the Laserjet MFP to 200 from my Mac (OS X Yosemite - 10.10.2), but only as a printer, I do not see the scanner function.

  On the list of printers it shows like Hello Hello not multifunctional, but I don't know how to change it. Any ideas?

  Many thanks in advance,

  Andy

  Hi @Andy_Davies,

  I see by your post that you are able to print but not able to scan. I'd love to help you.

  What model Laserjet 200 do you have? How can I find my model number or product number?

  How is the printer connected? (Ethernet/WiFi)

  Did you download the latest drivers or run Apple updates to install the printer?

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the printer name) Then click the Add button.

  You add the printer from an Admin account?

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  Please let me know the results. Thank you.

• Scan to e-mail, works not while on the other are. HP Color 200 M251nw

  I work for a large company, with thousands of hp printers.  We have very strict policies for printers.  Our network is configured to accept internal emails on port 25 to our using unencrypted SMTP address or user names, only IP.

  Last week I installed a new printer configured and set SMTP ip address on port 25 and only edited the sender to No_reply @. And I tripled checked the IP address

  HP Color 200 M251nw

  I ping the SMTP server of the cable.

  The printer can receive network task.

  other printers work with this setting.

  It cannot scan to e-mail.

  Other printers (models simular with the same settings and) can scan to e-mail.

  Any ideas why it does not work?

  Yesterday, I drove into a new 500 hp printer. Before I installed it, I decided factory discount for the 4th and final time.

  Miraculously it worked. No idea why.