make the first line of each paragraph "BOLD"

Similar Questions

• How can I get the first line of a paragraph style indent, but others not in withdrawal

  I created a style of paragraph indented on the first line of each paragraph. In most of the books, at the start of the first line of a chapter, this line is not indented while the rest are. Is there a way to set up in InDesign CS3? Is the only way to make this work is to manually go out the tab at the start of each chapter?

  2 paragraph styles.

  1 paragraph style has no dash

  2nd paragraph style has dash

  set "next style" in 1st paragraph for paragraph 2e style style

  the "next style" value in the style of paragraph 2 to "even".

  Existing text.

  Select all of the text

  Right-click on the 1 paragraph style and select apply style then next style.

  New text (typeing)

  Start typing with the selected 1 paragraph style. When you press ENTER to start a new paragraph, the style will switch automatically to the 2nd paragraph style to what manually enable you return.

  HTH

  -mt

• First line indent except the first line of a paragraph

  Hello

  I would create a paragraph style with a first line indent, with the exception of the first line, which I have no dash.

  Attached an example of how I want it to look.

  Best regards

  Vincent

  

  You need a second style to the first paragraph. Based on the other model and the withdrawal of first line value of 0.

• Remove duplicates by selecting the first line of each subgroup in a Recordset

  Oracle: 11 GR 2

  Client Windows 7

  I have a set of data (the result of a query) which is similar to:

  D_rank product_id product_desc category income price cost

  1 112233 prod1-iphone phone 200 500 100

  1 112233 prod1-iphone4 phone 200 500 100

  2 223344 prod2-300 1000 400 windows7 OS

  2 223344 prod2-300 1000 400 software windows7

  3 334455 prod3-Mac 1000 computer 1500-1000

  4 445566 prod4-xyz 2000 800 1200 misc

  :                    :               :                                   :               :             :              :

  :                    :               :                                   :               :             :              :

  :                    :               :                                   :               :             :              :

  As you can see the first 4 rows, these rows are repeated due to the product_desc and category material. I need these fields but the first value in each subgroup, so that each row is unique. I.e.

  D_rank product_id product_desc category income price cost

  1 112233 prod1-iphone phone 200 500 100

  2 223344 prod2-300 1000 400 windows7 OS

  3 334455 prod3-Mac 1000 computer 1500-1000

  4 445566 prod4-xyz 2000 800 1200 misc

  :                    :               :                                   :               :             :              :

  :                    :               :                                   :               :             :              :

  :                    :               :                                   :               :             :              :

  You will enjoy the little help.

  Hello

  user13667036 wrote:

  Oracle: 11 GR 2

  Client Windows 7

  I have a set of data (the result of a query) which is similar to:

  D_rank product_id product_desc category income price cost

  1 112233 prod1-iphone phone 200 500 100

  1 112233 prod1-iphone4 phone 200 500 100

  2 223344 prod2-300 1000 400 windows7 OS

  2 223344 prod2-300 1000 400 software windows7

  3 334455 prod3-Mac 1000 computer 1500-1000

  4 445566 prod4-xyz 2000 800 1200 misc

  :                    :               :                                   :               :             :              :

  :                    :               :                                   :               :             :              :

  :                    :               :                                   :               :             :              :

  As you can see the first 4 rows, these rows are repeated due to the product_desc and category material. I have need of these fields but the first value of each subgroup...

  ...

  What does "first" here?  What "subgroup"?

  Depending on your needs, maybe you want to Request Top - N, something like this:

  WITH got_r_num AS

  (

  SELECT d_rank, product_id, product_desc, category, price, income, cost

  ROW_NUMBER () OVER (PARTITION BY d_rank

  ORDER BY product_desc, category

  ) AS r_num

  OF data_set

  )

  SELECT d_rank, product_id, product_desc, category, price, income, cost

  OF got_r_num

  WHERE r_num = 1

  ;

  I hope that answers your question.

  If this isn't the case, please post a small example of data (CREATE TABLE and INSERT statements) and the results desired from these data.  (I know you said this is a game of results from a query, and not an array, but the solution is the same as the entry is a single table, or a query, perhaps involvoing several tables.)

  Report when the request above is erroneous results and explain, using specific examples, how find you the correct results from these data.

  As said ground, see the FAQ in the forum: Re: 2. How can I ask a question on the forums?

• How can I set the first line of a paragraph in and not have spaces between the lines?

  < h2 > 1937 < / h2 >

  < p > < span class = "highlight" > 14 February </span > - I was born at home and placed in the drawer from the top of a dresser to Independence, Missouri.

  < p > Hedy Lamarr escapes from the castle of her husband in Austria where he was imprisoned. She drugged her maid, snuck up on the castle to wear clothing of her maid and her own jewelry and fled to Paris where she met Mayer, who gave him a contract with MGM.

  < p > Bertrand Goldberg shaped plywood in the surfaces of the body profile for a sofa and a Chair facing the San Francisco exhibition of 1937. Goldberg has designed five houses built like a small development in Melrose Park, Illinois, on land owned by Ross Beatty. These houses were simple structures at ground level with a gabled offering storage in the attic roof. Each House has two bedrooms, a bathroom, kitchen and living room. Standard houses is also manufactured closets and cabinets. The Standard of Melrose Park houses a local phenomenon. Marketed in only $2 995, Architectural Forum indicated that three thousand people visited one of the empty houses the opening day, September 24, 1939. The five houses were sold in one day.

  The code I gave you this results in DW Live View and preview in the browser.  See screenshot.

  

  Nancy O.

• "BOLD" from the first words of each line?

  I wonder if there is a way to fully automate this. I'm style expandable body of interview-format the text, and I would only the first word of each paragraph, be bold if they are one of the three names. I currently have a nested style black the first word of each paragraph, but not all of the paragraphs in the text begin with a name of interview. Can anyone help?

  Depends on if you need it to happen automatically when you start new documents with interviews, or if you need to do just for a single doc where all your text has already been sent to. If the latter, I had:

  (1) make a duplicate of the nested-style-parastyle called BoldNames

  (2) remove the nested style old style paragraph - now zero paragraphs have the nested style applied, and you have a separate unused paragraph with the nested style in style.

  (3) research the doc with a GREP query:

  To find

  ^(Jake|) Joel | James)

  Implement

  $

  with the format of

  BoldNames

  In this way, only the paragraphs that have one of these names at the beginning of the paragraph will be marked with the paragraph style that owns the nested style that applies "BOLD".

• How do to "BOLD" in the first line of text on a number of sections of text at a time

  CS5 using (but we have CS5

  .5 available) we will create a business directory. Each page has columns of type

  business listings with the company name on top, under this address under this phone, etc.  Each ad is separated

  by a single line. There are thousands of ads, and we need to "BOLD" in the top line of each. How can do us

  without making them individually?

  Each line a paragraph, or each list a paragraph with soft returns (forced line breaks)?

  It's very simple and basic in both cases an operation. It is especially easy if each ad has the same number of lines, so we will focus first with this case.

  Each line should be a separate paragraph. If you have 4 lines, as your example, you might want to mention their name, street, city, and phone. You can and should, all the styles that will be similar in appearance on the same basic model and change only the atrributes that are different, so, for example, if all lines use the same font, many use the same size and weight and only the top line is different and only by being "BOLD" and or larger size start by defining the street, then city and phone based Street and you don't need to define something more than the next Style, I'll get to in a second.

  For topics, set name based as well on the street, but change the font characters. Now all the features of the basic fonts can be changed in one place, the definition of the style Stree.

  Since you have the same number of lines in each list, you can set up a loop "next style". For name, style next street is, the street is the city, for the city it is the phone and is name for the phone. You will also need to toe after the add space in the name, or space on the phone to book spaces registration and you probably also consider to assign everything except phone keep with the next line to prevent a list from breaking across a page or column break. If currently you have blank lines as separators (empty paragraphs), get rid of them. There are change queries find already registered in ID that will do that.

  Once the text is in place and the styles are defined, you can select all, then right click on the style name in the paragraph Styles Panel and choose apply following Style and name. Reformatted your entire list. IT IS CRITICAL in this method that the structure of each list is identical, and if there are no empty lines between the lists.

  If each line is a paragraph, but there is line different counts, you will probably reach with just two styles, one for the headings oand one for everything else, but the beat of following style will not work. If there is something unique that appears in all the headings you can use find/replace to make search and reformat in shape, but I suspect that this will not be the case on in the real world, there will be a manual work involved.

  Where a lisitn is a single paragraph, line break forced (which is better suited to the case of an uneven lines by registration number) you can define a character style nested to be applied by means of a line break forced to make the first line "BOLD", red or any other thing you want.

  At this point, you are probbly, noting that a bit before planningn is a good idea when you do a directory so that your ads have some sort of coherent structure that allows for automation. I have no idea whre that your text is coming from or how it is done in the code. If it can be established as a .csv or a tab-delimited text file, you can use data merge to fill a file based on a model of merge (i.e., how to build directories for my clients who need). You can set styles in the model to each field or paragraph that contains several fields, and merge data will remove empty lines if all row fields are null and there is no punctuation or whitespace on the line.

  A multiple records per page fusion will give you individual blocks of text for each record, and you can, if you wish, thread them using the script text point of Rorohiko.com.

• InDesign CS6 fully justify won't fit on the left the last line of a paragraph.

  As Indesign CS6 does not seem to justify the last line of each paragraph to the left when I put it to justify fully in my paragraph styles is there a way I can automatically add a space without paragraph at the end of each paragraph?  The text for the book, I formatted is all part of a text as it has been imported the document of my client.  So I can't us the end of the story to rinse.  Help...

  It is withdrawal and spacing...

  

• Pulling on the first line with a value of repetition

  Hello
  We use the Oracle 11.1.
  
  We have a table of postal codes.
  
  We have several lines for each zip code because we have different areas that use the same zip code.
  
  We want to reduce the lines of a line by zip code. But they said use they want to keep the fields that differ (neighborhood of the exodus).
  
  Then they said "Just take the first value of each."
  
  This code reduces the postcodes of a line by postal code, but as you can see I replaced the field with the name of the field values.
  

  SELECT distinct  ZIPCODE, CITY, STATE, COUNTY, AREACODE, 'CITYTYPE', CITYALIASABBREVIATION, 'CITYALIASNAME', LATITUDE, LONGITUDE, TIMEZONE, ELEVATION, COUNTYFIPS, DAYLIGHTSAVING, PREFERREDLASTLINEKEY, CLASSIFICATIONCODE,
             MULTICOUNTY, STATEFIPS, 'CITYSTATEKEY', 'CITYALIASCODE', 'PRIMARYRECORD', CITYMIXEDCASE, 'CITYALIASMIXEDCASE', STATEANSI, COUNTYANSI
      FROM   zip_code
  GROUP BY   ZIPCODE, CITY, STATE, COUNTY, AREACODE, CITYTYPE, CITYALIASABBREVIATION, LATITUDE, LONGITUDE, TIMEZONE, ELEVATION, COUNTYFIPS, DAYLIGHTSAVING, PREFERREDLASTLINEKEY, CLASSIFICATIONCODE, MULTICOUNTY, STATEFIPS,
             CITYALIASCODE, PRIMARYRECORD, CITYMIXEDCASE, STATEANSI, COUNTYANSI
  order by zipcode; 

  How should I take either one record per postal code with the first value in these fields or
  
  How should I take the first record for each zip code?
  
  either way works for me.
  
  Thank you

  Hello

  This is called a Query Top - N , and this is a way to do it:

  WITH     got_r_num     AS
  (
       SELECT     z.*
       ,     ROW_NUMBER () OVER ( PARTITION BY  zipcode
                                 ORDER BY          city
                           ,                ...   -- add tie-breakers here
                         )      AS r_num
       FROM    zip_code
  )
  SELECT     *     -- or list all columns except r_num
  FROM     got_r_num
  WHERE     r_num     = 1
  ;
  

  You can simply use MIN or MAX on the columns, as the line with the name of the minimum city do not lowest have area code or the longitude. The above method preserves the first line of each zip code intact, where the 'first': the first in order of aphabetic by the name of the city. If it is not unique, then you may want breakage to the analytical ORDER BY clause.

  If you are deleting rows, you can use this in a NOT IN subquery. If you copy lines to a new table, you can use the query above in an INSERT statement.

  Published by: Frank Kulash, March 18, 2011 12:40

  I just see Polywog response:

  Pollywog wrote:
  You can use the rank or rownumber function...

  If I understand the problem, you don't want to use RANK in this particular case. When there is equality, GRADE will assign 1 to all the contenders. I think the whole point of this thread is that you exactly want a #1 in each zip code, which is what ROW_NUMBER, but not RANK, guarantees.

• When I print from Windows Live Mail, the left margin is far more than the first letters of each line are missing. Where can I go to change the margin?

  When I print from Windows Live Mail, the left margin is far more than the first letters of each line are missing.  Where can I go to change the left margin on Windows Live Mail?

  Print settings are in Internet Explorer, the file (ALT + F keyboard), Page Setup

  Increase the left? the margin of

• How to select and default hightlight the first line in a programmatic Table(ADF Table created based on a SortableModel) ADF.

  Hi all

  
  

  We use JDeveloper Studio Edition Version 12.1.3.0.0 and deployed on GlassFish Server Open Source Edition 3.1.2.2 (build 5) and connect to the SQLServer database.

  
  

  We created a table ADF programming related to a SortableModel created programmatically to a bean.

  
  

  We need to select and highlight the first row in the table just after making it to retrieve data based on the first line.

  
  

  We tried the based on the following thread: How to call the bean support just after JSFF / page fragment loads? and a few other posts online, but it does not work very well.

  
  

  W has created a hidden text in the bottom of the JSF model as follows:

  
  

  < af:table varStatus = "rowStat" Summary = "table" value = "#{pageFlowScope.crudBean.dynamicTable.collectionModel} '"

  Rows = "#{pageFlowScope.crudBean.dynamicTable.collectionModel.RowCount} '"

  contentDelivery = 'immediate' var = 'row' rendered = 'true '.

  Binding = "#{backingBeanScope.crudBackingBean.tasksTable} '"

  selectionListener = "#{backingBeanScope.crudBackingBean.customListener} '"

  "rowSelection ="single"id ="t1"partialTriggers =": pt_gr2 "columnStretching =" column: clmn0 ">

  < af:forEach items = "#{pageFlowScope.crudBean.dynamicTable.columnNames}" var = 'name' varStatus 'vs' = > "

  < af:column sortable = "true" sortProperty rowHeader = "#{name}" = "no style" headerText = "#{pageFlowScope.crudBean.dynamicTable.columnLabel [name]}" "

  inlineStyle = "width: 100px;"  ID = "clmn$ {vs.index}" >

  < af:activeOutputText value = "#{row [name]}" id = "aot1" / >

  < / af:column >

  < / af:forEach >

  < / af:table >

  ....

  
  

  < af:outputText id = "hiddenOutputTextId" visible = "false" value = "#{backingBeanScope.crudBackingBean.afterPageLoad} '"

  Binding="#{backingBeanScope.crudBackingBean.hiddenOutputText}"/ >

  And we have added the code to the bean to support below:

  public String getAfterPageLoad() {}

  If (!.) {AdfFacesContext.getCurrentInstance () .isPostback ()}

  selectFirstRowInTasksTable();

  }

  Return afterPageLoad;

  }

  public void selectFirstRowInTasksTable() {}

  try {}

  RKS RowKeySet = new RowKeySetImpl();

  RowKeySet rksEmpty = new RowKeySetImpl();

  Model CollectionModel = tasksTable.getValue ((CollectionModel));

  ROWCOUNT int = model.getRowCount ();

  If (rowcount > 0) {}

  model.setRowIndex (0);

  Key of the object = model.getRowKey ();

  RKS. Add (Key);

  tasksTable.setSelectedRowKeys (rks);

  SelectionEvent selectEvent =

  new SelectionEvent (tasksTable.getSelectedRowKeys (), rks, tasksTable);

  selectEvent.queue ();

  customListener (selectEvent); / / to retrieve data

  AdfFacesContext.getCurrentInstance () .addPartialTarget (tasksTable);

  }

  } catch (Exception e) {}

  }

  }

  I think that () selectEvent.queue; should work even without calling the customerListener, but it is not working in all cases.

  What is the problem in my code?

  
  

  
  

  Have you tried to bind property of 'selectedRowKeys' to selection configuration / bean there?

  Something like:

  public RowKeySet getSelectedRKS() {
      if (rks == null) {
          // make first record as selected
          // create RowKeySet and assign it to rks variable(where rks is variable defined in bean with some scope higher than request scope)
      }
      return rks;
  }
  

  Dario

• Delete in af:table always remove the first line when using ExecuteWithParams

  Hello world

  I got a page with master form and af:table two details related to the master. When I'm trying to remove a line in an af:table of detail, it always removes the first line, any line, I selected before. The table has a single = rowSelection and the line is properly visually selected. I remove the line using a "delete hyperlink" on each line, but I first have to select the line. Delete called a bond (or a method at the bean by removing the current line of the iterator, I tried both, none of them work)

  Links page has an ExecuteWithParams defining the correct ID to edit on the master of iterator and an InvokeExecuteWithParams the renderModel value. If I put the refresh condition zero and I hard-code an ID in the binding variable in the model, I am able to delete the selected line.

  In addition, I don't know if this information is useful, but if I set the iterator to PPR ChangeEventPolicy, when I select a line, there always select the first line.

  Any ideas what I could do wrong? Is this a bug?

  I use JDev 11.1.1.7

  Thank you

  Guillaume

  You can try creating a method in ApplicationModule for filter master records instead of executeWithParams?

  Ashish

• InDesign automatically formatting the first line of text in a textbox?

  Hello

  My question looks very easy, but I can't find an answer anywhere.

  I like automatically formats the first line of text in a text box with the style of good character.

  I tried already different ways like GREP or styles nested.

  But I never had the right solution.

  I hope you can help me!

  See you soon,.

  Raphael Tebarts

  Well, it's not entirely "automagical", maybe someone knows better as well.

  1. you create nested Style special Para with the line Style.

  2. with grep \A[^\r]+ find all paragraphs in your text boxes and apply your new paragraph Style.

  For more information, take a look here:

  http://GraphicDesign.StackExchange.com/questions/37272/grep-apply-character-style-until-ca distribution-back

• I'm working on a list at several levels, and when my list gets to the two figures on the third level, he pushes the first line of the text beyond the point of withdrawal.

  I played a bit with the indent and spacing in the paragraph without result style. How to get to the line upwards again after this point or just change the withdrawal of this it is so every game, no matter what number he?

  Use a withdrawal left, like 10 mm for iterated section, then set the indentation of first line to 10 mm. (or 15/15 etc., depending on how much you need. Enter a tab between the number and the text in the first line.

  If you use auto-numbering lists, then typing a tab is not necessary, but also take a look at the left indent and the parameters of the line first indent.

• How to get the date for the first Monday of each month

  Dear members,
  
  How to get the date for the first Monday of each month.
  
  I wrote the following code
  
  SELECT decode (to_char (trunc (sysdate + 30, 'MM'), 'DAY'), 'MONDAY', trunc (sysdate + 30, 'MM'), NEXT_DAY (trunc (sysdate + 30, 'MM'), "LUN")) FROM DUAL
  
  But he looks at complex bith.
  
  Abhishek
  
  Published by: 9999999 on 8 March 2013 04:30

  Use the IW format - it will make independent NLS solution. And all you need is truncated 7^th day of each month using IW:

  select  sysdate current_date,
          trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
    from  dual
  /
  
  CURRENT_D FIRST_MON
  --------- ---------
  08-MAR-13 04-MAR-13
  
  SQL> 
  

  Here is the list of the first Monday of the month of this year:

  with t as(
            select  add_months(date '2013-1-1',level-1) dt
              from  dual
              connect by level <= 12
           )
  select  dt first_of_the_month,
          trunc(dt + 6,'iw') first_monday_the_month
    from  t
  /
  
  FIRST_OF_ FIRST_MON
  --------- ---------
  01-JAN-13 07-JAN-13
  01-FEB-13 04-FEB-13
  01-MAR-13 04-MAR-13
  01-APR-13 01-APR-13
  01-MAY-13 06-MAY-13
  01-JUN-13 03-JUN-13
  01-JUL-13 01-JUL-13
  01-AUG-13 05-AUG-13
  01-SEP-13 02-SEP-13
  01-OCT-13 07-OCT-13
  01-NOV-13 04-NOV-13
  
  FIRST_OF_ FIRST_MON
  --------- ---------
  01-DEC-13 02-DEC-13
  
  12 rows selected.
  
  SQL> 
  

  SY.