Manager profile - can I change the Port?

Dear community,

I have a little problem. A customer uses an OSX Server (to El Capitan. 10.11.2 + Server Version 5.0.15).

The problem is, there is an Exchange Server that uses Port 443, so I can't use this port.

My first test was a Port Forwarding of incoming: 8443 to macserver:443. I can reach the server, but when I log in, then it redirects me to the default 443 ssl port.

I have checked the ssl httpd configuration, took a look in other apache-configs... changed ports 443 to 8443... but without success...

How do you do that? Someone had the same problem?

Thanks in advance

No you can not change the ports using the Profile Manager. Even if you could change the ports at the end of the Profile Manager server, you have absolutely no chance of being able to change the equivalent settings built into iOS etc devices.

Having two or more public IP addresses different so that the Exchange Server can have its own without conflict with the Profile Manager is an option that most of the larger organizations would use.

It maybe by using a reverse proxy server could also be an option. The reverse proxy server would transmit 443 traffic to any server, it is by looking at the URL, for example gets sent to this server and the is passed to the other.

NGINX is the main reverse proxy server software.

PS. If it is not possible to overturn or transmit proxies the other ports used for profile, i.e. the NPP ports Manager, it is possible to reverse proxy standard web ports 80 and 443.

Tags: Servers and Enterprise Software

Similar Questions

  • How can I change the port setting?

    Just installed HP Color Laserjet 2550 L on my XP PRO laptop using the USB port.  Properties shows port is configured as DOT4. Printer is recognized as being online, but cannot print. How can I change the configuration of the port?

    Hi JohnNielsen,

    · You receive an error message or error code when you try to print?

    · What is the service pack installed on the computer?

    Follow the methods below:

    Method 1:

    Print a test page and check the results.

    Method 2:

    Run the patch from the link below: printing problems and printing errors:

    You can also check the links below:

    Solve a problem: print:

    With regard to:

    Samhrutha G S - Microsoft technical support.

  • change the port used by apex 4.0


    How can I change the port used by apex? For example, instead of 8080 I want to use 8081

    Thank you

    If you use OC4J, or any other application server, but you do not use the EPG you must reset the EPG

    exec dbms_xdb.sethttpport( 0 );
  • Changing the Port for the Server 3.5.2 FMS

    How can I change the port from 80 to 1935? I'm using Server 2008.

    You can change the ports of conf/fms.ini. See the value for the ADAPTER. HOSTPORT.

  • How can I change the outgoing in El Capitan mail port settings?

    My internet service provider recently changed the messaging port coming out (IMAP). How do I change this setting? I can receive messages but not send it. I can send email from the provider's Web site. It's already happened and usually I can send emails for several days. I changed the port settings in the past, but did not figure how to do it since the upgrade to El Capitan.

    If you know where to put the port, but it is not enabled, uncheck the box marked automatically detect and manage settings. Then, you should be able to change the port.

    The outgoing port will be in the SMTP settings. Each account has a configuration which you can access by selecting Edit from the context menu of SMTP.

  • How can I change the name to the left of the profile picture on the start page of Windows 8?

    I just upgraded my PC Windows 7 to 8 Pro. In the start screen, I changed the profile picture on the top right corner, but the name of the left is not a mine or a name that I have attached to my PC. My PC has my correct name including my Microsoft account. How can I change the name? It appears also as a residential group name.


    Thanks for posting in the Forum the Microsoft community.

    I understand from your description you want to change the name of the profile picture.

    Check the following site for the image:

    Control Panel > user account > manage user account > change account name

    Hope the above information is helpful. If you have any question back to us, we are happy to help you.

    Thank you.

  • How can I change the default port 443 on Windows Server Essentials 2012?

    I'm trying to install on my server remote access, but port 443 is already in use with another server on the same configuration broadband, so I need to change to allow access.

    Also, what should I change on the computers to connect to this port



    Welcome to the Microsoft community forums!

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

    If you need to change the port for remote access,

    You can search on a lot after u come and change port 443

    Hope this information helps.
  • Can I change the server port, but Windows Mail continues to change at 25

    I can get my outgoing mail working by changing the port from 25 to 587, but whenever I close the Windows Mail application and re-open it, it comes back to port 25 (and will not work). Thanks for the help!

    You should always back up when you use a Microsoft product.  Your hard drive may die too.  But deleting the e-mail account does not delete messages, and repair the database will not ruin it.  I have not had one person complaining about this program (WMUtil) except for one person who said their antivirus software falsely reported that the file is infected (it was not).


  • I managed somehow to change all my links to be opened by a program. How can I change the links on my desk to open the programs they shoud intend to open?


    on my desk, I managed somehow to change all my links to be opened by a program... IE interent explore opens in DIVX... and my Office link gets open DIVX... But if I check properties for this link he started the original link location... . How can I change the links on mt shoud Office to open the programs they intend to open


    Original title: links

    Here is the solution:

  • Hi, can I change the password for alloracle online in production? -example - FNDCPASS apps/apps 0 System/Manager ALLORACLE WELCOME


    can I change the password for "alloracle" online in production? -example - FNDCPASS apps/apps 0 System/Manager ALLORACLE WELCOME

    version: oracle EBS 12.1.3.


    Kumaran S

    Hello Kumaran,

    For security reasons, I would not be advised to do.

    If it's not prod, some customers follow which. But it's sold to the customer.

    However, for the production, it is not recommended.

    Hope this helps!

    Kind regards


  • Lightroom can't change the photos of mark IV 5 d in 1DS camera profiles

    May I ask on Lightroom camera profiles? I can't change the photos of mark IV 5 d in 1DS camera profiles. When I tried to change it, the color saturation is very low, as black and white photos.

    Before I used Adobe DNG Converter & DNG Profile Editor to make my own Canon 1DS camera profiles. The effects of the 1DS the color profiles that surrounds the peoples were adorable. It was a success with 5 d mark III.

    But now, using the new camera 5 d IV. I followed the steps of old, using DNG Profile Editor to open it and then choose Canon 1DS DCP to export. The effects of saturation of color does not become as before. It turns very low over the DNG Profile Editor, when I tried to export a new dcp 1DS file in lightroom, looks still very low color saturation.

    I would ask if anyone has come across such a problem...

    I hope that someone can help and can solve my problem.

    Thank you!

    someone already answered my question. The answer is: in the DNG profile editor just add + 1 saturation (any button of saturation), it goes back to normal.

    Thank you all!

  • Can I change the color of an existing image profile in Photoshop Mix?

    Can I change the color of an existing image profile in Photoshop Mix?

    Hey there avidartist!

    First of all, I want to apologize for my late reply. Thanks for your patience!

    Unfortunately, it is not possible at the moment to change the color profile. However, this is a big request! You can share it with the team by typing "give us feedback" in the app menu (tap on the product icon in the upper left corner of the application all for the project).

    I would like to know if I can help with anything else!


  • How can I change the http port and https by default vsphere: 80 and 443 to others for security reasons?

    I want to changed the ports http and https by default but nof found any file config in this regard, anyonr can help me?

    To change the port side ESX follow this KB (it can also works on ESX 4)

    Change or block ports by default 80 (http) and 443 (https) on ESX 3.x

    On ESXi with what I don't know is the right file.


  • I can't change the profile picture of my discussion group?

    So I created a focus group with some of my friends. I changed the name, but I can't change the photo icon. I can change the image to other Skype conversations that I am but not this one. I do the exact same thing (double clicking) but it does nothing. What can I do? Thank you!

    This problem has been fixed in Skype for Mac 7.0. Please find out more here:

  • After changing the port (1521 to 1525 in listener.ora and tnsnames.ora) OEM: the database is down


    I'm installing Oracle Database 11 g 2 ( on Oracle Linux 7.1.

    In short, what I'm trying to do now is changing the default port of 1521 to 1525.

    So I stopped the listener (lsnrctl stop) and then changed my listener.ora and tnsnames.ora:


    listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

    # Generated by Oracle configuration tools.







    (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = localhost))



    ADR_BASE_LISTENER = / u01/app/oracle


    tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

    # Generated by Oracle configuration tools.

    BI =



    (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = localhost))




    (SERVICE_NAME = bi)



    And then changed the local_listener:



    Finally, I started the listener (lsnrctl start) again.

    Then I tried to connect using Oracle SQL Developer to the customer. The port of 1525 works perfectly well.

    The problem is, when I open the OEM (Oracle Enterprise Manager), it says: "the database is down. Please specify the credentials of the host to access the restart and database diagnostic tools," which is like this:

    So I logged on the account of the host, and it shows that the database instance, listener and the agent is all down like this:

    It seems that the port used by the OEM is always 1521.

    What should I do? Can someone help me solve the problem?

    Thanks in advance.


    After changing the & the targets.xml (thanks to Elisabeth), you will need to reconfigure dbconsole using emca.

    So what I'm doing is decreasing the config:

    $ emca - deconfig dbcontrol db-rest drop

    and then create again:

    $ emca - create config dbcontrol db-rest


    Best regards

    Jerry Antonius


    Try to change the port numbers in the following files

    Don't port no 1521 to 1525

    $ORACLE_HOME /_SID/sysman/config/

    oracle.sysman.eml.mntr.emdRepPort = 1525 (before 1521)

    $ORACLE_HOME /_SID/sysman/emd/targets.xml

    (Before 1521)

    (Before 1521)

Maybe you are looking for