Manipulate the values of the variables to trigger conditional comments

Similar Questions

• Set the value of a variable using a conditional, on a sliding scale?

  Basically what I'm doing, is assign the variable "supplement" a number of base on the Variable 'numberOfSheets '. The only problem is that I need to assign a different variable for each leaf up to 6,000. All about 6000 will have the same variable.

  Someone has any idea how to write something like this, without having to show the sources individually each sheet?

  Here's an example of my code...

  function calculateUpCharge (): void {}

  {if (numberOfSheets = 1)}

  upCharge = number (20);

  }

  ElseIf (numberOfSheets = 2) {}

  upCharge = number (19.5);

  }

  ElseIf (numberOfSheets = 3) {}

  upCharge = number (19);

  }

  ElseIf (numberOfSheets = 4) {}

  upCharge = number (18.5);

  }

  ElseIf (numberOfSheets = 5) {}

  upCharge = number (18);

  }}

  What is a linear function?  If so, use:

  var m:Number;

  var b:Number;

  paramF (6000,2,1,20);

  function calculateUpCharge (): void {}

  upCharge = m * numberOfSheets + b

  upCharge = Math.max (upCharge, m * 6000 + b;)

  }

  function paramF(x1:Number,y1:Number,x2:Number,y2:Number):void {}

  m =(Y1-Y2) /(x1-x2);

  b = y1 - m * x 1;

  }

• Assessment of the value of a variable in OpenScript

  I try to navigate the screens and views based on a spreadsheet that contains the screens/views there. I use variables based on a set of data that I managed to substitute in different method calls to change views, etc. What I try to do is to use the value of the variable in a condition statement 'if' to control the flow of the script. I tried referring to it directly and have also tried assigning a different variable and referencing. No approach has worked (I have commeted some of the approaches). Instead use the value, it seems to be using the literal string that prevents the use of the variable (I know by the result of the test because it calls gotoScreen instead of gotoView as well as the showMessageDialog which displays the literal string of the {{db. ViewList.ScreenName}}. I also tried to test the reverse logic (if (' {{db. ViewList.ScreenName}} '! = 'Accounts Screen')) which also contributes to prove that it does not work. Here is the code snippet:
  
  
  
  for (int i = 0; i < 70; i ++)
  {
  getDatabank("ViewList").getNextDatabankRecord ();
  String sScreenName = "{{db." ViewList.ScreenName}} ';
  getVariables () .set ("vScreenName", "{{db. ViewList.ScreenName}}");
  String sScreenName = getVariables () .get (vScreenName);
  JOptionPane.showMessageDialog (null, "nickname is:" + sScreenName);
  JOptionPane.showMessageDialog (null, "nickname is: {{vScreenName}}");
  
  If (sScreenName.isEmpty () | sScreenName == null)
  If (sScreenName.length () == 0)
  If (sScreenName! = "Accounts Screen")
  If ('{{db. ViewList.ScreenName}}"== null | «{{db.» (ViewList.ScreenName}}"==" ")
  {
  siebelFT
  () .pageTabs
  114,
  ("[" / siebelft:cas[@ClassName='SiebApplication "and @RepositoryName ="Siebel Automotive']/siebelft:cas[@ClassName='SiebPageTabs"and @RepositoryName ="SiebPageTabs"] ')
  .gotoView ("{{db. ViewList.ViewName}}");
  } else
  {
  siebelFT
  () .pageTabs
  82,
  ("[" / siebelft:cas[@ClassName='SiebApplication "and @RepositoryName ="Siebel Automotive']/siebelft:cas[@ClassName='SiebPageTabs"and @RepositoryName ="SiebPageTabs"] ')
  .gotoScreen ("{{db. ViewList.ScreenName}}");
  }
  Web.Window (83, "/ web:window[@index='0" or @title = 'Siebel Automotive'] "")
  .waitForPage (null);
  {
  Think (7.711);
  }
  } / / End of loop
  
  
  
  -John

  Hello

  If you want to evaluate a variable you meed to call the eval() method, for example

  String name = eval ("{{varName}}");

  in your case the if statement should look like this

  If (eval ("{{db. ViewList.ScreenName}}'). = 'Accounts Screen')

  Hope that helps

  Alex

• Access the value of a variable assigned to CompositionReady?

  I created a variable called counter inside the 'scene' in the "CompositionReady" using the following code.

  var counter = 0;

  How to get or write the value of this variable

  through a 'trigger '?

  Remove the var on the counter.

  Just so put this in compositionReady

  counter = 0;

  Then you can just call him in a trigger as

  Alert (Counter);

  or

  counter + 1;

  or as if (counter == 1) {}

  }

  or whatever.

  I hope this helps.

• Collect the value of edittext box &amp; menu drop-down list to manipulate the project

  I built a simple GUI with a dropdown Panel and three boxes of edittext. I know not how to retrieve the values of each object to pass to the ASP (layers of text, project items). I'm still confussed on how to the onClick, onChange, onDeactivate, etc. methods work with functions... If I want to for example, to take the values in the boxes edittext to change values to text in a model layer, how could - I collect these values and pass them? In the sample code below it passes the default values for areas of edittext straight for layers of text in the model as soon as the GUI is launched...

  myGUI (this);

  function myGUI (thisObj) {}

  var myGUIPalette = myGUI_buildUI (thisObj);

  function myGUI_buildUI (thisObj) {}

  var myPanel = (thisObj instanceof Panel)? thisObj: new window ("palette", "user input panel', undefined, {resizable: true}");

  {//Build GUI

  res = "group {orientation:"column",-}".

  titleGroup: group {orientation: 'row', \}

  myStaticText: StaticText {text: 'Handset team word interludes'}, \

  },\

  textLineGroup: Panel {orientation: "column,"------}

  teamList:DropDownList {properties: {items: ['SORT CODES', '-', "ARI", "ATL", "BALL"]}}, \

  line01: EditText {}, \

  line02: EditText {}, \

  line03: EditText {}, \

  },\

  'ButtonGroup': group {orientation: 'row', \}

  clearButton: button {text: 'Clear'}, \

  renderButton: button {text: 'Making'}, \

  },\

  }";

  }

  myPanel.grp = myPanel.add (res);

  Default values

  var myPanel.grp.textLineGroup = textBox;

  textBox.teamList.selection = 0;

  textBox.line02.visible = false;

  textBox.line03.visible = false;

  var button = myPanel.grp.buttonGroup;

  var textBoxSize = (200, 20);

  var textBoxCharacters = 30;

  textBox.line01.size = textBoxSize;

  textBox.line01.characters = textBoxCharacters;

  textBox.line02.characters = textBoxCharacters;

  textBox.line03.characters = textBoxCharacters;

  Text box settings

  var defaultText01 = "enter the text of the line 01 ';

  var defaultText02 = "enter the text of the line 02."

  var defaultText03 = "enter line 03 Text."

  var myPanel.grp.textLineGroup = textBox;

  textBox.line01.text = defaultText01;

  textBox.line02.text = defaultText02;

  textBox.line03.text = defaultText03;

  textBox.line01.onActivate = function() {setTextBox (textBox.line01, defaultText01)};

  textBox.line02.onActivate = function() {setTextBox (textBox.line02, defaultText02)};

  textBox.line03.onActivate = function() {setTextBox (textBox.line03, defaultText03)};

  function setTextBox (activeTextBox, defaultText) {}

  if(activeTextBox.Text == DefaultText) {}

  activeTextBox.text = "";

  }

  activeTextBox.onDeactivate = function() {}

  If (activeTextBox.text == "") {}

  activeTextBox.text = defaultText;

  }

  ElseIf (activeTextBox == textBox.line01) {}

  textBox.line02.visible = true;

  }

  ElseIf (activeTextBox == textBox.line02) {}

  textBox.line03.visible = true;

  }

  };

  }

  var teamTri;

  textBox.teamList.onChange = function() {teamTri = textBox.teamList.selection};

  Settings button

  button.clearButton.onClick = function() {}

  textBox.line01.active = false;

  textBox.line02.active = false;

  textBox.line03.active = false;

  textBox.line02.visible = false;

  textBox.line03.visible = false;

  textBox.teamList.selection = 0;

  textBox.line01.text = defaultText01;

  textBox.line02.text = defaultText02;

  textBox.line03.text = defaultText03;

  }

  Manipulate the AE project

  ////////////////////////////////////

  ////////////////////////////////////

  #include "/ GFXM1/Script_Workflows/commonFunctions.jsx".

  var targetWidth;  Horizontal limit for altered text layers

  var modifiedLayers = new Array();

  numItems = app.project.items.length; collect the number of project items

  var teamLogosFolderMov = locateProjItems (FolderItem, "teamLogosMov");  Use CompItem to comps

  var teamLogosFolderRaster = locateProjItems (FolderItem, "teamLogosRaster");  Use CompItem to comps

  var teamLogosFolderVector = locateProjItems (FolderItem, "teamLogosVector");  Use CompItem to comps

  If (textBox.line03.text! = ' ': textBox.line03.text! = defaultText03) {}

  lineValue = textBox.line01.text + textBox.line02.text + "\r\n" + "\r\n", textBox.line03.text;

  }

  ElseIf (textBox.line02.text! = ' ': textBox.line02.text! = defaultText03) {}

  lineValue = textBox.line01.text + "\r\n" + textBox.line02.text;

  }

  else {lineValue = textBox.line01.text ;}

  for (c = 1; c < = numItems; c ++) {}

  model var = app.project.items [c];

  If (comp instanceof CompItem) {}

  for (i = 1; i < = comp.numLayers; i ++) {}

  {Switch (COMP. Layer (i). Name)}

  case 'textLines_GD ':

  targetWidth = 1720;

  setTextLayer_caseSensitive (comp.layer (i), lineValue);

  projectName = lineValue;

  If (scaleTextLayer (COMP. Layer (i), comp.layer (i).sourceRectAtTime(1,_true).width, targetWidth)) {}

  modifiedLayers.push (comp.layer (i));

  }

  break;

  case 'teamLogo_GD ':

  var numFolderItems = teamLogosFolderMov.numItems; Get the number of items in the folder teamLogos

  swapTeamLogo (numFolderItems, teamLogosFolderMov, teamTri, comp.layer (i));

  break;

  }

  }

  }

  }

  function swapTeamLogo (numFolderItems, teamLogosFolder, teamTri, layer) {}

  for (b = 1; b < = numFolderItems; b ++) {/ / loop in the teamLogos folder}

  If (teamLogosFolder.item (b) .name == teamTri) {/ / Check for game}

  layer.replaceSource (teamLogosFolder.item (b), true);  team swap in comp teamLogo logo

  }

  } //end check the teamLogos folder

  }

  ////////////////////////////////////

  ////////////////////////////////////

  Return myPanel;

  }

  If ((myGUIPalette! = null) & & (myGUIPalette instanceof window)) {}

  myGUIPalette.center ();

  myGUIPalette.show ();

  }

  }

  Hello, if your range variables are in the scope of your function (which is the case here) you need not pass them as arguments to your function.

  Then you can simply activate what wrote you in a function already and call on events, something like this:

  doIt() function

  {

  var

  targetWidth, numFolderItems, lineValue, ProjectName

  modifiedLayers = new Array(),

  numItems = app.project.items.length; collect the number of project items

  teamLogosFolderMov = locateProjItems (FolderItem, "teamLogosMov"), //Use CompItem for comps

  teamLogosFolderRaster = locateProjItems (FolderItem, "teamLogosRaster"), //Use CompItem for comps

  teamLogosFolderVector = locateProjItems (FolderItem, "teamLogosVector"), //Use CompItem for comps

  model,

  I, c;

  If (textBox.line03.text! = ' ': textBox.line03.text! = defaultText03) lineValue = textBox.line01.text + textBox.line02.text + "\r\n" + "\r\n", textBox.line03.text

  ElseIf (textBox.line02.text! = ' ': textBox.line02.text! = defaultText03) lineValue = textBox.line01.text + "\r\n" + textBox.line02.text

  else lineValue = textBox.line01.text;

  for (c = 1; c<= numitems;="" c++)="" if="" (="" (comp="app.project.item(c))" instanceof="">

  {

  for (i = 1; i<= comp.numlayers;="" i++)="">

  {

  case 'textLines_GD ':

  targetWidth = 1720;

  setTextLayer_caseSensitive (comp.layer (i), lineValue);

  projectName = lineValue;

  If (scaleTextLayer (COMP. Layer (i), comp.layer (i).sourceRectAtTime(1,_true).width, targetWidth)) modifiedLayers.push (comp.layer (i));

  break;

  case 'teamLogo_GD ':

  numFolderItems = teamLogosFolderMov.numItems; Get the number of items in the folder teamLogos

  swapTeamLogo (numFolderItems, teamLogosFolderMov, teamTri, comp.layer (i));

  break;

  default:;

  };

  };

  };

  myPanel.grp.buttonGroup.renderButton.onClick = needs;

  If instead you want to write a function that is independent from the UI variables, IE not dependent on variables of string, then you must pass these values as arguments:

  function must (text01 text02 text03, defaultText01, defaultText02, defaultText03)

  {

  same start

  get lineValue of arguments

  lineValue = text01; If (text02! = "" |) Text02! = defaultText02) {lineValue += "\r\n" + text02;}  If (text03! = "" |) Text03! = defaultText03) lineValue += "\r\n" + text03 ;} ;

  same end

  };

  myPanel.grp.buttonGroup.renderButton.onClick = function() {has (textBox.line01.text, textBox.line02.text, textBox.line03.text, defaultText01, defaultText02, defaultText03) ;};

  Note: I changed my computer var = app.project.items [c]; (does not work) to comp = app.project.item (c); and if (textBox.line02.text! = ' ' | textBox.line02.text! = defaultText03) (risky) if (textBox.line02.text! = ' ': textBox.line02.text! = defaultText03).

  Xavier.

• How to manipulate the NCLOB values in oracle 10g?

  Hi Experts,
  I have a scenario where I have to show the output of the screen multi language. IM using plsql developer, my plsql block should show the report of multi language.
  Root table have multi language stirng stored in it with the NCLOB data type. In my block plsql, im in NCLOB variable(ex: var1) selection. When I insert as var1 in other tables of test with nclob column, it's showing the original text in multi language. But when I manipulate than with some other variables var1 (ex: var3: = var2 | var1), now if I insert additional tables var3 it inserts as var2? value. and even in the DBMS output as well.
  Please help me to get the original value of multi language. Or guide me to manipulate variables nclob.

  Have you tried DBMS_LOB. ADD?

• Double click and get and store the value in the variable.

  Hello
  
  It is my intention when I double click on a particular record on a table, I want to enter or store the specific record value in a variable and call this variable in the print/preview PLSQL code button.
  
  Below, I show the screenshot that contains a preview in the form of table and print button. After filling in the data. user double click the code officer LC354 and click Print Preview/mode button, it should display the report for only the
  Code of the agent of LC354(it's what I want). But normally when I click Preview before printing it affects wil see the report of the code of the agent of LC354 and LC325(which I don't).
  
  http://ImageShack.us/photo/my-images/811/printpb.PNG/
  
  My problem is how to capture the value ((*LC354*)) particular registration after double click the code(*LC354*) agent?
  
  I tried to store the agent code in the variable AG_CNT in mouse double click trigger with after the plsql code. but it dosent work.
  

  declare
  AG_CNT varchar2(10);
  begin
  *AG_CNT* :=GET_ITEM_PROPERTY('RFQ_AGENT_DETAILS.AGENT_CODE',CURRENT_RECORD);
  end;

  After that pass this AG_CNT value in *: AG_CODE *. the code below is in the Print/Preview button.

       cursor c1 is select nvl(count(ENQUIRY_NO),0) from scott.EXP_QUOTE_STATUS 
       where ltrim(rtrim(upper(job_status))) like 'APPROVED%' and ENQUIRY_NO = :REQ_FOR_QUOT.ENQUIRY_NO
  AND AGENT_CODE=*:AG_CODE* ;

  How to do this?
  
  SKUD.

  Hello

  When you click a folder, the focus moves to that record. To get the values of each element, just use the standard:

  :value := block.item ;
  

  François

• value of the variable 'keep '.

  Hello world!!

  An applescript noob here!

  I'm trying to create a script using Automator to "find and replace" name of my client always in the same file in Textedit, so I can use this text by only to replace every time the name of the customer. (as a model)

  So far, I got this:

  display dialog "which is the name of your client?" default answer «»

  Set cst_name to text returned of the result

  dialogue box "are you sure you want to change it?

  Global customer

  the value customer cst_name

  Tell application "TextEdit".

  -Find and replace

  the value of each word in the document before where it = 'CSTX' to the customer

  tell the end

  My problem here is, of course, when the text 'CSTX' changed once using the scrip he is not called CSTX more, but the name I just enter in the dialog box guests.

  Is there a way to 'keep' the value of this variable so I can run this script as often I do.

  Do you guys think that this is an easier solution for this?

  THX in advance!

  If the first instance of it will always be in the same place of the document each time, you can get it with:

  Tell application "TextEdit".

  Words from 5 to 5 of 1

  tell the end

  (142371)

• How to set the value of a variable in automator?

  I'm totally new to automator I found a post that I try to reuse

  to Re: copy multiple files from TextEdit in one Word file

  I want to open a series of html files in a folder and convert in a TextEdit rtf file.

  However, I am unable to automator find out how set the value of a variable such that it appears in this post

  I looked at every command in library without a lot of fortune

  Any help?

  Thank you

  Dan

  Its in Utilities.

  In Automator, use the search box:

  

• How to control the value of a variable that is shared at the beginning of the vi

  Hi all

  In short: How can I make sure the values of the variables shared at the start of a vi?

  I have two vi.

  One is a main vi where did I order a shared Boolean variable "run DAQ".

  The other is a vi with a while loop that "polls" for the shared variable "Execute DAQ", which is connected to a box Structure. If the case is false, it does nothing, if it is true is short some simple IO DAQ within a while loop.

  To be sure that at the beginning of the vi the variable 'Execute DAQ' shared value false (no matter what 'State' the shared variable was left in front of the vi began) I write a Boolean constant to this shared variable 'Execute DAQ' out of hand while loop.

  Now my question: how is it possible that the case structure can enter into the 'True' State, even when main vi is not executed and there is therefore no way of the shared variable can be written in. I know that shared variables are stored in memory, but that's why I write it to false at the beginning of the vi.

  Even when I read the first shared variable before you change it with a constant False the second instance of the shared variable that is wired to the case structure bed to True.
  It seems to me that the shared variables do not follow the 'right' of the dependence of LabView and are updated outside the normal flow of the vi.

  Thanks for your time and advise on this.

  JackT wrote:

  Someone knows another way around this?

  Yes.  Do not use them.

  If you not post on a network, use a normal Global Variable or use a queue, the user event, stating to send commands indicating loops for updating their values.

  If on a network, then I recommend the network stream to send commands/data back with updates.  I used shared variables, more I hate them.

• Monitor changes in the value of a variable in a module of code labview TestStand?

  Hi all

  A code in Labview module called from an action step has a particular variable that changes its value when running vi. Is it possible to monitor these changes through for example a local variable in TestStand and display different values on UI in real time via UIMessages?

  Thank you very much!

  You must post a UIMessage during execution of your VI.  As the following picture below, you can ignore the SequenceErrorMessage string and use the value of your variable as the numericDataParam.   I guess the trick is to determine where to display the user interface of Message, in your case, the variable updated at certain times or it he constantly updated?  I'm not sure of the performance LAG if at all times you post a UIMessage say every 100ms.

  

  On the other end, you will need in your interface user create a reminder of the Interface to manage the UIMessage.  See the following link for more details.

  http://www.NI.com/white-paper/4532/en

  Enjoy,

  PH

• TestStand 2012 keeps the value of the variable

  I have a problem with TestStand 2012 that preserves the value of the variable. I have a step and its parameters in the string variable. I use the expression step as Step.Settings += "00". I run the sequence under sequential model and the problem is that Step.Settings is equal to "00" on the first run, '0000' on the second throw, '000000' on the third race and so forth, but it must rest '00' on each race. I can't find the root cause. Anyone has the same problem and can advice how to solve?

  Try to uncheck the properties of the sequence > optimize reentrant calls to this sequence to the sequence that contains the step.

• Can I change the values of the variables in the variables view control?

  I want to use the variables view control in Labview. I see only the values, but I can't change the values or create new Variables. Will there be a chance to do?
  I use Labview 8.6.1 and Teststand 4.1.1.

  You must activate the edit mode for the ApplicationMgr, by setting ApplicationMgr.IsEditor to true. Note that you must have at least the license of the custom editor for teststand so that it works (otherwise it will prompt the user to activate a license with these privileges).

  Hope this helps,

  -Doug

• How to set the value of a variable in a cluster in LabVIEW to c#?

  Hi guys, I'm working on a small c# program, which by using the interface provided by LabVIEW.  And I know that, with the help of lv. SetControlValue (name, value) can set a variable just on the front panel. But in my case, there are several groups on the front panel. Then it confused me how to set the variables in these groups. For example, there is a cluster named clusterA and a variable named a., I tried something like this:

  lv.SetControlValue("clusterA.valueA",1);
  

  but it totally inoperable. Everyone has some experience with this sort of thing? Thank you very much!!

  Hey guys, thanks a lot for all your response. I just found a simple way to solve this problem. For example, there is a cluster named "ClusterA", and there are only two witnesses, who are: an int value named "IntA" (default = 10 IntA value) and a string value named "StringA" (by default the StringA = 'abc'). In c#, if you call the method:

  var clusterA is vi (Array). GetControlValue ("ClusterA");

  you will get a table looks like: clusterA = {10, 'abc'}; So if you want to change IntA 123, you simply do:

  clusterA.SetValue (123, 0); 123 the value, 0 is the index of IntA in clusterA, after this clusterA table = {123, 'abc'}

  After that, simply to make the table in LabVIEW using:

  VI. SetControlValue ("ClusterA", clusterA);

  and now you see the LabVIEW, IntA is changed.

• Get the current value of the variable when reaching CNVCreateSubscriber

  I use CNVCreateSubscriber () to create a subscription read to a network Variable: whenever the value of the variable changes, the DataCallback is called and I'm able to get the new value of the variable.

  But how to get the value of the variable when a subscription is created?

  I read in the help CNVCreateBufferedSubscriber () returns this information, but I wonder if using CNVGetDataFromBuffer () in a polling loop has the same performance as the approach to DataCallback of CNVCreateSubscriber ().

  In addition, the dataStatus (CNVGetDataFromBuffer) parameter is different for different Subscribers? (that is if I have multiple subscribers, CNVStaleData is related to the specific Subscriber or is a global property of the variable)?

  CNVData data;

  CNVGetConnectionAttribute (customer, CNVMostRecentDataAttribute, &data);)