Manipulation of the RGB values of controls

Similar Questions

• Anomaly of control button with the RGB values in the Info Panel

  I was getting ready to do and UN - do by CMD - Z, I pressed down command and notice that has changed the RGB values in the panal Info.  The tool I used was the selection tool, so it was only by pressing CMD has been change tool.  I tried to move my pointer to different locations and by pressing command and enough course the bud of values, it was sometimes a little change of 2 to 4.  When I placed the pointer on a thin chain that the topic was the change in value was like 60.  Is the CMD key causing the pointer select a larger area, or something like that or is it just an anomaly.

  Yes, pressing the command when the Selection tool or a pipette is selected does the picking area 5 x 5 instead of 1 x 1.

• All the default values of control programmatically (arduino distribution)

  So I know this has been discussed before, but I have a unique situation.  I will download code to Arduinos using Labview for Arduino toolkit compiler.  I want to programmatically set some default control values on each Arduino using a Labview GUI.  The Arduino kit that I use has a VI of compilation which takes a VI, it compiles, and then it downloads to the Arduino.  How can I change the default value for controls of the VI before he compiled and downloaded?

  Have you tried to use nodes property to set values and nodes of the method of "current default" and save the VI then?

  

• Why not the RGB values Match the values of percentage?

  If you view the attached link, you'll see that when I pass proofing RGB values do not match the values of percentage of solid red color, according to the percentage values, 40% green in there! Normally I would not be concerned but LR is not printed correctly my reds, can someone tell me what's happening please?

  http://screencast.com/t/OML7Ptz8Nai9 http://screencast.com/t/OML7Ptz8Nai9

  D gap wrote:

  Todd - the histogram in Lightroom/view works the same way for the RGB files that are made, as it does for raw files? IOW, it remap in ProPhoto primary and curved tone sRGB? I don't remember.

  Bingo, yes of course since I LR working color space! To test, I converted a 0-0-255 red image with colour profile Adobe RGB in PS using ProPhoto RGB with the Gamma of 2.2. The RGB values are 222, 103, 46 or percentage 87.1, 40.4, 18.0%, which is very close to the values observed in LR (87.6, 40.7, 16.7%). As you say this is quite normal.

  On the question of the OP with the Epson printer profile I suspect it's also normal because of the loss of gamut.  JasonBatley what Epson printer profile are do you use and what do you mean by "the colors look terrible? When you Soft proof in LR with the Epson profile more precisely what are "visually" see you it is different (not numbers)?

  

• option to enter the RGB value and output on the image?

  Long story short... we have thousands of images we need to gather information than RGB transfer us to an excel doc.  It is used to create a script that would automatically color - choose a certain position of pixel (500, 500) and output values 3 somewhere on top of the image (like a huge text layer)?  I'm looking for just a quick way to find the RGB values of these images without having to manually color each of them choose.

  I would be grateful for any info on the subject.

  Thank you!

  I posted a script here...

  http://www.PS-scripts.com/BB/viewtopic.php?f=9&t=4117&SID=766cc720b24315eb55365013c418bbde

• How to get the RGB value of a pixel in a psd document using scripting Photoshop

  Hi, guys!    Does anyone know how to get the RGB value of a pixel in a psd document using scripts in Photoshop?  I myself have missed for a long time and could not resolve. I am very happy to hear your voice as soon as possible!

  Here is an example...

  var originalUnits = app.preferences.rulerUnits;
  app.preferences.rulerUnits = Units.PIXELS;
  var doc = activeDocument;
  var Colour1 = GetHexColour(eyeDropperRGB(1,doc.height-1));
  var Colour2 = GetHexColour(eyeDropperRGB(20,doc.height-5));
  var Colour3 = GetHexColour(eyeDropperRGB(40,doc.height-14));
  alert("Colour 1 = " +Colour1 + "\rColour 2 = " +Colour2 + "\rColour 3 = " +Colour3);
  var decColour = eyeDropperRGB(40,doc.height-14);
  alert("Red = " +decColour[0] + "\rGreen = " +decColour[1] + "\rBlue = " +decColour[2]);
  app.preferences.rulerUnits = originalUnits;
  function GetHexColour(reqHex){
  var out='';
  for(No in colours = reqHex){
   out = out.concat(zeroPad(d2h(reqHex[No]),2));
   }
  return out;
  };
  function eyeDropperRGB(x,y) {
   var x2 = x + 1;
   var y2 = y + 1;
   var out = new Array(3);
   activeDocument.selection.select([[x,y], [x2,y], [x2,y2], [x, y2]], SelectionType.REPLACE, 0, false);
   for(ch in list = ["Red", "Green", "Blue"]) {
   histogram = activeDocument.channels[list[ch]].histogram;
    for (i = 0; i <= 255; i++) {
     if (histogram[i]) {
      out[ch] = i;
      break;
     }
    }
   }
    return out;
  };
  function d2h(d) {return d.toString(16);}
  function zeroPad(n, s) {
     n = n.toString();
     while (n.length < s)  n = '0' + n;
     return n;
  };
  

• Get the RGB values of existing clip

  Hello
  
  I'm trying to get the RGB of MC that is loaded in the main SWF file values. (This means that the RGB values are not addressed, getRGB returns 0.)
  
  Does anyone have a solution to get the RGB values for existing MC on which setRGB is not used?
  
  Thanks in advance.
  
  Best regards
  Rick.

  Hi Peter,.

  the getPixel32() method works. The only thing I can't understand is the output of the function. I mainly get 0 as the output of the Web beacons (black fill, alpha 0 - set with new BitmapData()), but there are also negative values. The thing I've done is ignore all values <= 0="" and="" use="" the="" value="">0.

  The code is attached (cut out irrelevant code, so there might be errors when pasted into Flash):

  ----------------------------------
  ----------------------------------
  Hi RothRock,

  I have not tried to apply a transformation to the authoring tool, but who would probably work (in theory, it seems logical to me). But that would mean almost the same as the creation of vars with the values inside the imported MC. It's not easy to use because it passes for a minimum of 1000 MC who problably will increase rapidly. The MC will also be created by my client that does not have too much Flash. But as you can see, the code below provides an adequate solution.

  Best regards
  Rick.

• Programmatically determine the default value of control

  Hello

  I'm trying to understand a reasonably sustainable method to detect if the sub VI input is wired.

  I use the approach to the definition of an absurd default for the control, and then by comparing the current value of the control to a constant of this value. If they are not equal, so I pass the value of the control in my registry to offset. If they are equal, I hold that any value has been previously in the shift register. In this case, I created a driving force that allows me to update the status bar.

  It works because my progress meter is a U8 I'll never write 0-100, so I can set my default to something outside this range (in this case, 255) for my comparison. Something similar should be relatively simple to understand and reuse in the future.

  However, there is a dependency on a person if the default value for the control and the update of the constant comparison to match. My question: is there a method to check the default value for a control programmatically in order to remove the coupling? I realize that any method would be invariably slower with regard to execution, but it's simply out of curiosity.

  

  I think that this method is reasonably justifiable if you document correctly and it works for me. Other developers do not tend to change the default values of the controls without reason.

  That said, the Control class has a default property, but I think it's private and it may not work when you generate an EXE file.

  If you want something that is more explicit, you can build a polymorphous VI - have one version of the VI with the entrance and the other without. The main problem is that users may not know that the entrance is there for them to wire without looking at instances of the polyVI, so I still prefer the method of the invalid value.

• The RGB values in the test are bad LR6 and LRCC 2105

  When evaluating a file in LR, the test values are incorrect.  This has been documented as a bug in Lightroom CC Soft Proof histogram displays incorrect RGB values.  Everything has been done to address this problem?   If not, is there a work around?  If not, what are do you properly evaluate your RAW captures.  Our studio does not level beyond 5.7 LR

  The result is this disconnect in RGB numbers are a bug in LR6. LR5 is correct, it is correlated with Photoshop and ACR.

  Adobe knows about it. He is recorded as a bug and fix. It appears in the most recent version of LR CC (and therefore 6.1.1).

• Error deploying VM - exceeds the maximum value to control

  Dear all,

  I am trying to deploy a virtual to a model windows 2008 x 64 computer in a cluster, but I got an error error exceeds the maximum for given control.

  I need to know is there any number of virtual machines that can be deployed from a model, is - that related to the Windows license?

  Thank you

  Regads,

  N M

  1 try to deploy the virtual computer with the mounting hardware for deployment.

  See the KB below:

  http://KB.VMware.com/kb/1016221

  Or try the below

  Workaround solution:

  1. Convert virtual machine model;
  2. Change the settings for virtual machine; (if you get an error here, you unsubscribe vm and save it (i.e) remove from inventory and add to the inventory).
  3. Choose a network suitable for model; remove the network card or see if you added vmxnet.
  4. Convert the virtual machine to the model;
  5. Try to deploy new virtual machine model to see if it works properly again;

  Allocation of points for the useful and correct answer by clicking on the sub tab

• I'm looking for the RGB values of the PURPLE (private mode) Firefox Button?

  Or TSL values?

  Thank you

  Don't include the prefix ' *' characters from the code in a section reserved for comments.
  
  Those who have been added only to reflect that you are in on the comments section.

  This code should work:

  menupopup > * {
   font-size: 15pt !important
  }

• RGB value of the color white

  Hello

  I work with form of oracle 10g and my canvas color is white, but I think that the color white is not white color

  on this page, I write on (for example).

  or the white color of any model at the express request.

  can someone give me the RGB value of the white color of any model apex?

  Thank you

  ORA-01400 wrote:

  I work with form of oracle 10g and my canvas color is white, but I think that the color white is not white color

  on this page, I write on (for example).

  or the white color of any model at the express request.

  can someone give me the RGB value of the white color of any model apex?

  Depends on the topic and what you mean by 'white '.

  'White' is a color named HTML and CSS defined as rgb (255, 255, 255) or rgb (100%, 100%, 100%) in the (#FFFFFF in hex triplet) RGB color space, but maybe it's not the color that appears for you as 'white' in a given topic. As noted above, the best solution is to use a web inspector or browser extension tool to identify the actual color applied applied to a specific component.

• % RGB values is no longer visible to the Magnifier tool Selection white balance

  When you use the white balance selection tool in LR3.3 RC RGB values no longer appear in the Magnifier window while moving the tool around the image. The only way I can get the values to display is to stop moving the tool, then click on one of several keys (e.g. Ctrl or shift or Alt, or------, etc..) As soon as I then move the tool that the RGB values again disappear until I stop and again once, click one of the buttons.  He had worked previously in LR3 (? before I updated to 3.2 to 3.3 - in other words, the values would show all the time as I moved the tool around the image.)   Any thoughts on what to do?

  Thank you.

  

  larsonts wrote:

  Any thoughts on what to do?

  This is a known bug. It was found soon enough after 3.3 RC came out he has a chance to set at 3.3 was released in the official version, but you never know with certainty what will be corrected. All you can do is wait.

  HAL

• ASO Essbase - loading data to overwrite the existing values

  I'm support ASO but does not know how he would "Overwrite the existing values" correctly.  I want it to work as BSO "crush."  Need help please, I am a newbie to ASO :(

  change the ASOAPP database. ASODB load_buffer to initialize with values of substitution of resource_usage 0.15 buffer_id 1 create slice;

  Thank you

  Which only Initializes the buffer, it does not load anything (as I imagine you know, KKT).  Just to be the opposite, I would say the MaxL may be harder but gives you a better idea on how loading to ASO that the use of the Regional service.

  To the OP, you are mixing two different command syntax.  'Substitution values' and 'create a group' syntax is part of the import , not the alter statement.

  Suggest you read this article of technical reference: loading data using pads

  Using tampons complicates slightly reproducing the behavior "crush."  You can choose multiple values loaded at the same intersection crash in the buffer zone, or in committing the buffer for the cube (or both).  BSO is not this distinction.  The substitution values clause controls what happens when the buffer is enabled for the cube, but by default multiple values at the same intersection in loading the buffer still the sum.  You can control what is happening to several values, hitting the same intersection in the buffer to aggregate_use_last / aggregate_sum buffer options in the alter statement.

• Displayed as in PhotoShop and elsewhere, RGB values instead of percentages

  I'd rather see the RGB values displayed as in PhotoShop and elsewhere, instead of percentages. Is it possible to change this view?

  It seems not to be. I found threads, topics, dating back to 2009 on the same topic. Switch to proofing and values change to the actual numbers.