Manual installation "ESXi550-201404001" on the stand-alone ESXi Server

Similar Questions

• Penetrating VM from ESX Cluster stand-alone ESXi Server

  I get an error trying to move a virtual machine of cluster VI in a standalone ESXi Server, someone had a bit of luck this?  I tried the following: Get-VM-name "CO-WS-TEST1" - location (Get-VMHost "CO-WS-TEST1"). Move-VM - Destination (Get-VMHost "CO-VM-TEST2") where CO-VM-TEST2 is a stand-alone ESXi server and CO-WS-TEST1 is in an ESX Cluster with VI.

  I get the following error:

  Get-VMHost: 2009-04-13 13:08:08 Get - VMHost VMHost with the "CO-VM-TEST2" name not found, using the specified filters.

  On line: 1 char: 60

  + Get-VM-name of the CO-WS-TEST1 | Move-VM-Destination (Get-VMHost & lt; & lt; & lt; & lt; "CO-VM-TEST2")

  Move-VM: cannot bind parameter 'Destination '. Could not convert "" to "VMware.VimAutomation.Types.VIContainer".

  On line: 1 char: 48

  + Get-VM-name of the CO-WS-TEST1 | Move-VM-Destination & lt; & lt; & lt; & lt; (Get-VMHost "CO-VM-TEST2")

  Thanks in advance for any help you can give me.

  What is ESXi system managed (for example with a non-free full license) by your vCenter?  If this isn't the case, then you can not make a gesture like this.  You can probably fake it with enough script and help of some external tools to make disk copy.

  [vExpert |] [ http://www.vmware.com/communities/vexpert/], PowerShell MVP, moderator of the VI Toolkit forum

  Author of the book: VMware Infrastructure Management with PowerShell

  Co-host, PowerScripting Podcast (http://powerscripting.net)

  Need help in General, other than VMware PowerShell? Try the PowerShellCommunity.org forums

• Can possible save of Cisco DCNM on NFS and FTP on the stand-alone dcnm Server

  Can anyone suggest me that how I can back up the database DCNM 7.2 for a stand-alone server on NFS /FTP?

  What is the procedure to perform the backup on server NFS /FTP?

  Is any dependency to take backup on remote servers from stand-alone server DCNM (not HA)?

  Hello

  VIEW includes a database backup utility in the $INSTALLDIR/dcm/directory/bin/view.  There are 2 versions of the script, one for Oracle and one for postgres databases, and they both can be run from the server command line.  These scripts will create a dump (.dmp) database file which you can ftp offshore to another server to files, if you wish.

  For reference, here is the documentation on backups of db VIEW:

  http://www.Cisco.com/c/en/us/TD/docs/switches/Datacenter/SW/7_2_x/Fundam...

  Thank you

  Eric

• Get the CPUID of my stand-alone ESXi Server

  Hello

  I need a command or script for ESXi get all CPUIDs related to the CPU of my server.

  could someone help me please?

  This KB is also applicable for versions 5.x

  Vim - cmd hostsvc/hosthardware works for me on version 5.1...

  Ditto for VMware s CPUID ISO at the end of the article.

  You can also use esxcli to retrieve the CPUID info material esxcli cpu cpuid get or material esxcli cpu overall get

  I'm sure that some order exist for PowerCLI but you can't tell right now...

  Finally, you can also retrieve some CPU info from inside the BONE prompted with this tool:

  http://www.CPUID.com/

  Intel Processor Identification Utility & mdash; Download Intel Processor Identification Utility for Windows

• Installation and use of the stand-alone converter 5.5

  vSphere 5.1, 5.1 VMware, Windows Server R2 64 bit VM 2012

  I am new to VM and VMware.  I didn't realize until today that if you allocate a certain amount of disk space for a virtual computer and later decide to reduce the allocation of disk space, you must convert "" the virtual machine to an amount reduced space during the conversion.  I allocated 300 GB to a virtual machine and I want to now the award to 100 GB.  The real Windows Server 2012 R2 64 bit partition size is currently 40 GB.

  What I want to do is to install the Converter 5.5 on the same physical server (Windows Storage Server 2012 64 bit) where I currently have installed 5.1 vSphere.  I would use 5.5 of converter to convert the virtual machine that has excessive disk space allocation of the physical server.

  1. What are the options use during installation of 5.5 Converter (Converter Standalone Server?, Converter Standalone Agent?, Converter Standalone Client?, etc..)

  2. are there any special advice and guidance for conversion into a VM with less disk space allocation?

  Thanks in advance.

  
  

  First I create a VM "empty"?  I see are my existing VM, without the possibility to appoint a new virtual machine.

  No, you don't need create a VM 'empty', just type the name for the new virtual machine and try to use a different name of the VMs on the right panel.

• Error after you start the stand-alone weblogic Server

  < 22 January 2011 19:32:36 AST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >
  < 22 January 2011 19:32:36 AST > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >
  IntegratedWebLogicServer start time: 311391 ms.
  IntegratedWebLogicServer has begun.
  Manager of the < logger > < error > ServletContainerAdapter not initialized successfully.
  
  Help, please...

  Ignore the error
  See logging and auditing 361988
  http://download.Oracle.com/docs/CD/E13217_01/WLOC/docs10/notes/known_resolved.html

• Deploying the application to the stand-alone WebLogic problem

  Hello!
  I have a problem with the stand-alone WebLogic Server applications.
  We migrated to JDeveloper 11.1.1.5 to 11.1.2.1. I followed the instructions on this page: https://blogs.oracle.com/imc/entry/standalone_weblogic_domain_for_adf to deploy our application of ADF on AdminServer. Everything worked OK.
  
  Then I followed the instructions on this page: http://docs.oracle.com/cd/E21043_01/web.1111/e13813/custom_jrf.htm to apply with our "ADF_server" the server JRF managed and got this:
  WLS: / offline > applyJRF ('ADF_server', ' / Oracle/Middleware/user_projects/domains/our_domain ')
  Read the/Oracle/Middleware/user_projects/domains/our_domain area of applyJRF
  Copy the configuration files JRF/Oracle/Middleware/oracle_common/modules/Oracle/Middleware/user_projects/domains/our_domain/config/fmwconfig/servers/ADF_server
  Components JRF target to "ADF_server".
  Update changes JRF to/Oracle/Middleware/user_projects/domains/our_domain field in offline mode
  It's probably OK?
  
  When I try to deploy a problem occurs on a managed server 'ADF_server':
  * [10: 55:08] Weblogic Server Exception: weblogic.application.ModuleException: could not load the webapp: "ADFMainApplication-ViewController-context-root."
  * [10: 55:08] caused by: weblogic.management.DeploymentException: error: unresolved Webapp library makes reference to ' [ServletContext@1542360219[app:ADFMainApplication_Project1_ADFMainApplication module: root ADFMainApplication-ViewController-context-path: / ADFMainApplication-ViewController-context-root spec-version: 2.5] ", defined in weblogic.xml [Extension name: jsf Specification-Version: 2, exact match: false] *.
  * [10: 55:08] see the server logs or the console of the server for more details.*
  * [10: 55:08] weblogic.application.ModuleException: failed to load the webapp: "ADFMainApplication-ViewController-context-root."
  * [10: 55:08] deployment cancelled.*
  * [10: 55:08] - incomplete deployment. *
  * [10: 55:08] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer). *
  
  What should I do to run the managed server? Help, please.
  Best regards, Marko

  You did to be sure that the 11.1.1.5.0 adf runtime has been installed on the managed server before installing Upgrade patches to 11.1.2.1.0?

  If this isn't the case, it is the problem. The new runtime environment is installed automatically if the olny one has been set up correctly, my personal conclusion from my tests. If you want to learn more about this check http://tompeez.wordpress.com/2011/06/25/upgrading-wls-10-3-5-with-adf-runtime-11-1-2-0-0-sherman-patch/ and http://tompeez.wordpress.com/2011/06/29/follow-up-upgrading-wls-10-3-5-with-adf-runtime-11-1-2-0-0-sherman-patch/.

  You can make the threethings:
  1. Open Enterprise Manager, select your managed server and hope you see a message like "JRF aply to this managed server" (don't remember the exact wording). To do this, and libraries must configure OK.
  2. open the administration console and select the necessary shared libraries and add your manages the target server. Problem is that you don't know what libs are needed. If you don't mind target libraries to the managed server. Not sure if this causes problems later.
  3 write information on the managed server as port, domain names machine name. Remove the server managed the installation of WLS. It must be very sad that you upgrade and which should be no application or shared library of your one deployed on the managed server. After removal of the old successful server closes wls and start it again (just for security). Now, create a new managed server with all names, ports, and other information like the old using the quick start tool.

  I prefer the 3 method, this one worked for me all the time.

  Timo

• App Deployment on stand-alone Weblogic Server

  Hello
  
  I deployed a simple application for the stand-alone Weblogic Server:
  
  1 Middleware and Weblogic installed from jdevstudio11116install.bin
  2. created domain, global created DB connection
  3 application deployed successfully via a direct connection of JDeveloper, JDBC configuration for deployment contains the same JNDI name as global connection DB in WL
  
  Start page contains a commandImageLinks that navigate to other pages
  
  Questions:
  1. when I click on the image or the link representative commandImageLink on the Start Page, nothing happens - new view is not loaded and browser keeps to display the Start Page
  2. when I insert a page that has been granted access DB, WL displays error "ORA01005: password to null, connection refused '"crash"
  
  I missed a few imortant step?
  
  Thanks for the support,
  
  Daniel

  http://www.coderanch.com/t/456284/Linux-UNIX/Java-lang-noClassDefFoundError-could-not

  John

• Where can I download the stand-alone installer for .NET Framework 1.0 to 4.0 for Windows XP SP3 x 86

  I would like to download full standalone installer for Windows XP and Vista x 86 for Net Framework 1 to 4. If anyone can provide the links for XP and Vista x 86 it would be appreciated.

  Hi Victor Moreau.

  Thanks for posting in the Microsoft Community.

  I understand that you want to download the stand-alone installer for .NET Framework 1.0 to 4.0 for Windows XP SP3 x 86.

  I suggest you download links to install older versions of .NET:http://www.microsoft.com/net/download

• Download the stand-alone Flash Player does not require a browser? I have ver 11.5 r502 I d/l the last year; want a more recent version.

  Download the stand-alone Flash Player does not require a browser? I have ver 11.5 r502 I d/l the last year (February 11, 2013); want a more recent version.

  Cannot find a lot on the standalone viewer, except in the docs of Flash Builder, who says a .swf can specify to use. I can't find a download link.

  Thank you, Doug

  You can download the standalone player (projector) since https://www.adobe.com/support/flashplayer/downloads.html

  Note that the download is the player, not an installer, you will need to manually .swf file association.

• 'Simulate download' option appearing only in the stand-alone Flash Player debugger

  I have a strange problem - today I seem to have completely lost the 'Simulate download' option in the menu display of the standalone Flash Player. When the problem started, I ran the last 11.5 TIME Installer Flash drive and then downloaded the latest version of the debugger, but still no dice. The stand-alone version, that I am running is called "flashplayer_11_sa_debug.exe" so it should work. Is there something special I need to do after loading a SWF file to get the ability to simulate the download? I thought that any standalone player debugger should give me the option of the simulate download once I loaded a SWF, but I tried older versions and they are also not showing this option for some reason any. :/

  FWIW, I use Flashdevelop and Flash CS5 Pro - I tried building/launch of my Flashdevelop project (which launches the debugger 11.x player) and directly from CS5 ide (which launches a debugger 10.x player), but neither has the simulation download option more. I also tried to launch another, older Flash project and I got the same results in the player.

  I can't imagine what is wrong, since this feature was yesterday in the drive and I don't have any major changes to my configuration of Flash Pro/Flashdevelop (AFAIK). Any help would be greatly appreciated, thank you!

  OK, I got it working again... I guess download simulation is only shown for me doing a release, not make a debug version. I don't understand, but I'm going with it! Thank you.

• Windows Media Player ActiveX plays do not image, but the stand alone WMP application. Why?

  I use my Windows Media Player v11 with extra codec to play mp4 files (mp4 are not supported by default with WMP 11, so I had to install a codec). It works very well in the stand-alone application, but when I use the ActiveX control in the regulation, it does not use the codec and I get only sound... no picture. I thought that the ActiveX was merely an interface to the same application of base used by OR and the stand alone media player. And if it's the same kernel, it must use the same codec. What Miss me?

  I have a tip for you. If you download Quicktime 7 (QT), you can select the QT activex player (see picture). It plays mp4 and seems better. QT is free, so there shouldn't be any problem. Try and see if it make you good

• How to create multiple user login on the stand-alone machine on Windows 7 Professional

  Dear all,

  I want to implement multiple user login on the stand-alone machine of Windows 7 Professional (there is no working group or active directory).
  There are 20 users in different positions.
  I want to create each logon with different password and set user policies.
  If I create so many users there will be number of boxes. So, I want the user to type their name and the password and login.
  Please help me if I can do it, and if the issue is not clear, let me know so that I can help what I want.
  Thank you
  Gregory Mhatre

  I have not tried (not had W7 pro), but this is the info you wanted? - http://social.technet.microsoft.com/Forums/windows/en-US/d42b07fa-530f-442a-9340-7f892e22a3be/change-login-prompt

  As I say, cannot try, just found by a search. Hope that I have not misunderstood.

• I have a subscription Adobe CC and then Adobe CS6 with a separate license. In addition, I also have a separate license for the stand-alone Adobe Lightroom version.  These were installed on separate computers, however no opf the versio of stand alone

  I have a subscription Adobe CC and then Adobe CS6 with a separate license. In addition, I also have a separate license for the stand-alone Adobe Lightroom version.  These were installed on separate computers, however no opf the stand-alone version will work now that I get a box for Creative cloud telling me that I have the software on two computers and I have to disconnect from the other computer.  How can I fix so that I mustn't keep disconnection in order to work on my laptop, etc. ? I have a subscription to the program and three separate license for each other. When he told me to update the program he changed everything to CC, which I did not intend to do.

  HI ProfWSA,

  I see that you have a subscription active creative cloud.

  I beg you sure you want to contact adobe help support:

  Contact the customer service

• Deploying vSphere model W2K12R2 on the stand-alone ESXi5.5 Server

  We have vSphere 5.5 to 6 ESXi servers in a cluster and windows 2012R2 model to deploy virtual machines

  I'll add another server ESXi in vSphere, but won't be in the vSphere cluster. We're going to use this server for 4 VM

  How can I deploy the template on this server 'stand-alone '?

  Can I copy the template to this server, register and deploy virtual machines.

  Or can I create an OVF file?

  Thank you

  It doesn't matter if this host joins the cluster or remains outside the cluster, as long as it's part of your vCenter inventory.

  You can deploy virtual machines of your models that exist in your vCenter inventory. No need to export these as the OVF.

  But Yes if this fourth host you have in place will not join the vCenter inventory you need your vCenter templates to export OVF models so they can be used to deploy virtual machines to your hosts of stand-alone esxi (not managed by vCenter).