Market requires versionCode must be set to a positive integer of 32 bits in AndroidManifest.xml.
Everything started playing with burrito and made my first android app well followed the tutorial and everything seems ok until the point where I load to the market and get the following error:
Market requires versionCode must be set to a positive integer of 32 bits in AndroidManifest.xml.
-app.xml file I found a versionNumber but no code. Tried to add it in vain, added everywhere but still does not work.
Cannot find anything anywhere. I'm puzzled.
Hello
There are some properties in the andriod manifest that you can not set directly. The them air conditioner sets from you Application XML descriptor file. In the case of the VersionCode, you must assign "versionNumber" in your application XML file. See p145 of document buildingAirApplications.pdf which I think is downloadable with the AIR SDK. :
"Content".
The version number can contain a sequence of three integers separated by periods. Each integer must be a number between 0 and 999 (inclusive).
Examples
My guess is that your version number breaks the above rule?
Tags: Adobe AIR
Similar Questions
-
I built an application on flash builder Buritto using the tutorial of " Christophe Coenraets ' building one
EmployeeDirectoryand everything worked fine while debugging in the virtual environment but when I try to transfer it to the andoid market im getting the following error: and everything worked fine while debugging in the virtual environment but when I try to transfer it to the andoid market im getting the following error:
Market requires the versionCode must be set to a positive integer of 32 bits in AndroidManifest.xml
How can I solve this problem
help please!
In your file manifest
0.0.0 -
I want to know the requirements that must be given to the team of storage before you create a lun
I want to know the requirements that must be given to the team of storage before asking a LUN
Generally the responsibility of a team of storage is to provide space for guests and make sure they can meet the space and I/O requirements. creating a virtual machine is usually done by the administration of VMware.
Basic information the storage team is the needs of WWN (in the case of FC storage) or IP addresses and s iqn (in the case of iSCSI) to set up the hosts. In addition to this the high need know that it is a VMware environment. According to the storage systems, hosts must be defined with the appropriate operating system that uses the LUN. Once the hosts are configured, all you have to do is to tell the storage team what LUN size you need, who is hosting the LUN must be submitted and probably the input/output expected for the VM running on this LUN, so that they can make the decision for example RAID levels a hierarchy...
André
-
I got a notification saying "password requirement: you must change your secret code in 56 minutes"I panicked and entered my access code using the little box? ". I ' t mess up?
Yes. You may be victim of a scam, except if you are connected to your business with this requirement.
Change your password immediately below:
-
I have a problem. Update of Flash Player required you must download and install the latest version of Adobe Flash Player to view this content. but my Flash player is up-to-date. I use ubuntu10.4, firefox 8.0
You are welcome
-
Original title: Dishnetwork Satellitensystem and Media Center.
I have dishnetwork Satellitensystem and I want to use Media Center. but my TV must be set on channel 73. How can I do this in media center, where options are not higher than Channel 4.
Thanks for any helpHello
You can try to change the setup of a transmission antenna and then follow the instructions on the link given by Cody to add the string (if she is not found automatically).
David
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
'TV' must be set on channel 39. How do I do this in Media Center?
I have a tuner box in another room and the coaxial TV cable that I'm running on my computer must be somehow on channel 39. Kind of like how a TV used to have to be given to channel 3 or 4 channels for a VCR to work with the TV. Somehow, I have to get my PC card to be granted to channel 39, so that I can then browse channels. I have a box in one piece only that goes up to three TVs. Must be set to channel 10, one at 23 and the last for the channel 39.
Hello
I suggest you to consult the following link to learn more about Windows Media Center.
-
Hey guys
I need help, in my company trying to learn switches I flashed my switch all :(
I now get this error
The system is unable to boot automatically. The BOOT
environment variable must be set with a bootable
image.I downloaded the c2950-i6q4l2 - tar.121 - 22.EA14.tar for the switch, but I'm unclear on how to load the catalyst 2950 only
switch: dir flash:
Directory of flash: /.3 - rwx 269
env_vars 7739904 bytes available (1536 bytes used)
switch: start
Loading ""...: permission denied ".Error loading «»
Interrupt within 5 seconds to cancel the startup process.
Boot process failed...
switch: start
Loading ""...: permission denied ".Error loading «»
Interrupt within 5 seconds to cancel the startup process.
Boot process failed...
switch:C2950 Boot Loader (C2950-HBOOT-M), Version 12.1 (11r) EA1, RELEASE SOFTWARE (fc1)
Updated Tuesday 22 July 02 17:18 by antonino
WS-C2950-24 from...
Basic Ethernet MAC address: 00:15:2 b: 46:7 b: 00
XMODEM file system is available.
Initializing the Flash...
flashfs [0]: 1 files, directories 1
flashfs [0]: 0 orphaned files, orphaned directories 0
flashfs [0]: Total number of bytes: 7741440
flashfs [0]: used bytes: 1536
flashfs [0]: available bytes: 7739904
flashfs [0]: fsck flashfs takes 4 seconds.
.. .done boot flash.
Boot sector file system (bs :) installed, isfd: 3)
Setting Filesystem block (pb :) installed, isfd: 4)
Loading ""...: permission denied ".Error loading «»
Interrupt within 5 seconds to cancel the startup process.
Boot process failed...The system is unable to boot automatically. The BOOT
environment variable must be set with a bootable
image.switch:
switch:
switch: flash
Initializing the Flash...
... The flash is already initialized.
switch: dir /.
Unknown cmd: dir /.
switch: dirList of currently registered file systems:
Flash [0]: (reading / writing)
XMODEM [1]: (read-only)
NULL [2]: (reading / writing)
BS [3]: (read-only)switch: 0
Unknown cmd: 0
switch: flash_init
switch: load_helper
switch: dir flash:
Directory of flash: /.2 - rwx 269
env_vars 7739904 bytes available (1536 bytes used)
switch:Hello
It seems that the image is not in the flash memory. Do you know where you downloaded the image? Once we know, we can understand what statement of startup, you need to do to make it start correctly.
Thank you
Garrett
-
ORA-04032: pga_aggregate_target must be set before moving on to auto mode
Hello
I use Windows server 2008 and Oracle 10 g R2.
I have set the PGA_AGGREGRATE_TARGET 0 and manual workarea_size_policy and bounced to the database.
But while trying to start the database, it shows me the error below...
ORA-04032: pga_aggregate_target must be set before moving on to auto mode
Can someone tell me how can I start the database or change the setting, thank you.Forget a moment EM. Make a file pfile from spfile with the command create pfile from spfile . In this document, change the setting and the value Manual and use this option for the instance using startup pfile =started. Post here the results of the steps of the copy paste the SQL * plus the term.
Aman...
-
ORA-02069: global_names must be set to true for this operation parameter
I'm trying to insert into a table with a database link. my selection is a database view. I get this error.
ORA-02069: global_names must be set to true for this operation parameter
When I create a table based on select * view and then try the insert, it copies.
Is there something I'm missing when I try to insert a view?
Thank youIn addition to read below note metalink
Insertion of data to view mapped Via Dblink to remote Table returns Ora-02069 [ID 467787.1] *. -
I used to have a printer of the 8500 series (if I remember correctly) that can be configured from the web interface to save on a standard network share (CIFS/Samba).
Some recent HP with capacity fax printers seem to be able to record in such an action on the network, but the documentation implies that only works on a Windows system with the HP software. It seems that the software configures only a standard Windows share to be accessible on the network.
Can it be set up a GNU/Linux system (NAS, server, etc.) without using Windows at all? How? Is there a shared resource naming convention, working group, etc. ? I can't find any references to this.
Edit: I found the installation steps of filing for my old digital printer, I wonder if there is something similar (or the same) in the user Web interface of the newer printers.
Ultimately I just installed a basic print/scan/copy printer (Envy 4500 series) that complements USB modem-Fax + eFaxGTK well. The only element missing from the old system is direct fax from the printer (now requiring a print + rescan to fax via eFaxGTK) and do not have a document feeder.
Use and OfficeJet pro introduces new problems:
* Lack of history for faxes sent
* Don't fax not working from the PC (I'm report a bug on this subject)-Gnu/Linux fax queue was aways "Paused".
* Fax backend related to HP printer (if the printer fails, no guarantee a new printer will use the same procedures to receive faxes, etc.)
None to retrieve faxes in memory of the printer of Gnu/Linux
* Address book related to the printer, not accessible/modifiable/Sync with the implementation of HPLIP
It's a shame HPLIP these poor support for these multifunction printers fax
-
Number of elements must be set to the logical level
In the channel Business model, mapping, dimension > logic > > number of items at this logical level
I came across two different versions of how to treat this
First version - the OBE and the server admin guide, it says "the number does.
no need to be exact, but the numbers of one logic level to the other, rates should be accurate."
Second Version - a question asked about what defines the number level both as best practices
To set the number of items at each level of a dimension, what number would you use?
A. the number of columns in a logical table
B. the number of levels in a dimension
C. the number of dimensions in a business model
D. the number of tables in a physical model
E. the number of separate lines in the physical column
It comes
What is the rule to set the number of items at this level?
If its been settled according to the rows in the table. What happens if the lines gets added every hour?
Edited by: ZSAM June 8, 2011 07:06
Edited by: ZSAM June 8, 2011 08:22The relationship between the levels, which is important according to me. BI Server will use this information to determine which source of aggregation to use. You must use the number of separate lines as the value.
You can also right-click on the hieracny and "Levels of estimate" allows you to automatically fill in the numbers for you.
Paul
-
When I changed my default back to IE, changed icons back, but everything always opens in Firefox... How can I get the shortcuts to open in Internet Explorer? I tried to delete the shortcuts of origin and by creating new ones, but they always open in Firefox...
Thank youHello
I'm not 100% sure that understand your problem. What you have said, I think you are saying that you have changed your default Firefox browser, and the desktop icons all passed under the icon of internet Explorer (blue e) to the firefox icon. You have changed the default back to IE browser, but the icons have not changed back, and when you click on them, they open in Firefox.
If this is the case, the problem is with your default browser configuration. What you have said, you have already settled it in the browser similar to the support article. for some reason any Windows has not changed the default browser.
You can try (in Win 7) open the Control Panel, then programs-> set default programs and click Internet Explorer in there, then "set this program as default.
Ian
-
Where I put "default email client". When surfer and needing to send an email from a Web site, this sentence comes in. Thank you
Hi Linda,.
This means that you should choose a program to use by default, for Windows to know which program to use when you send an e-mail.You can set a default program by following the instructions in this link:If you don't have any e-mail program installed, you can download Windows Live Mail, which is free and can be downloaded here: -
Updates in circulation must not set up
I run Windows 7 SP1 x 86 on my desktop pc and I tried to update after the February 2016 patchday. I had to download and install updates from 20.
After you have installed the 20 updates Windows 7 was stop and perform the configuration of the first phase up to 30%.
At that time came a BSOD 0 x 50 IPF in nonpaged area. WinDebug said: "Probably caused by ntkrpamp.exe."
In the history of Windows Update I have seen: 12 upgrades were in circulation, 7 updates were ok, 1 update has failed.
My problem: the modus in circulation does not change. When I install the new updates, the phase of configuration doesn't exist anymore.
When I see in the Windows Update/installe updates, 12 stocks appear to be "installed".
In a new search on Windows Update 12 stocks are not available.
This is not normal, what can I do to clear the situation?
Please download copies of your files to dump in the form of files shared your onedrive with a link here. Please include only the less than 14 days old and limiting the number of no more than five.
The dump file will be created in c:\windows\minidump. You may need to change your settings in Windows to be able to view the file. To show hidden files type Folder Options in the search box above the Start button and select view advanced settings and check that the box "display files and folders" and 'Hide protected operating system files' are not checked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.
What is your computer brand and model? If not a branded computer, what is your motherboard brand and model?
Please download and run the display driver and download a copy of the report he produced on your OneDrive. To obtain a report all drivers Select Edition, select all followed by file, save selected items.
http://www.NirSoft.NET/utils/DriverView.htmlPlease provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. The request for a copy of this file is additional to answer the question about the brand and the model. If the report is in one language other than English, please indicate the language.
For assistance OneDrive see paragraph 9.3
Maybe you are looking for
-
How can I add a person who has an iPhone to my imessage
I tried to message someone with an iPhone from my iPad, but he says not delivered because they are not in my contacts iMessage. How can I add the contact?
-
All the pop popup in new tabs instead of new windows.
All the pop popup in new tabs instead of new windows. I don't know why, but this happens not just a site, but all of them.
-
Chart 4 GB not given in j133tx
Hi all Received yesterday my 15-j133tx delivery! I bought it mainly for the graphics of 4 GB. But when I run dxdiag and check its just showing 1792MB. Why is it so? Am, I cheated? I bought this laptop from FLIPKART.COM They were also referred to as g
-
Slows down connections in Windows Vista
Original title: Blue Circle of death I hate this 'blue circle of death"that appears in Vista and slow connections to a snails pace, how do I get rid of him. Tried power off auto tuning, but had to reset like some sites does not have access.
-
Hello We have 2 security groups, 1 to provide desktop access remotely located in "remote desktop users"and 2. To provide administrative access to the group "Administrators". We have few users who are not part of the Administrators group, they can onl