Masters who overlap?

Similar Questions

• OS no tool no white who overlap

  I'm doing a simple tail stirs the animation and since it seems to be very difficult to do with the shape tween (at least, a natural animation moves) I decided to try OS for the first time.

  The tail is just a line (Yes, a very simple tail). I added 4 OS for it. It works fine when I move a BONE, but the problem is when a BONE overlaps the other, that part becomes white.

  I know this is to inform that a part of the line is on another part, but I can not disable it? Does it just mix one BONE with each other?

  After searching around, I found this site: http://www.adobe.com/devnet/flash/articles/character_animation_ik.html

  Apparently, the solution is to add a large number of small bones.

  Even though I loved my first experience with this tool, I think there is still a lot of tweaking and bug fixing by Adobe.

• Masters of writing again

  I do the masters who will be sent to the duplication.  These will play in a drive of DVD as well as Windows and Mac based computers.  I was still using 5.1 to create the image, and then use this image to burn 2 DVD masters (one for us, for duplicator).  I received an email from duplicator saying that DVDs are written package and this could cause problems with older versions of the DVD player.

  To my knowledge there is no place in again to close between "packet-writing" and "track-at-once", but I could be wrong.

  They also seem to duplicate much slower that a standard DVD, it is because they are written package?  Would be a DVD 'track-at-once' burn/duplicate faster because it's burning continues laser rather than individual data packets?

  Thank you

  "Packet Writing" usually comes on ROM discs and occurs when either the operating system creates a disk, or the disk is not properly closed and finalized.

  It should not happen again under any circumstances.

  As long as the resulting discs actually playable on a DVD player, they cannot be drafted package.

  Would it not possible to obtain a master file structure oif screenshot please?

• Photos app cannot import iPhoto library

  My iPhoto library is quite large, 32 GB for 9 500 items.  I've recently updated my operating system and related applications, and when I use the Photo app to import the old iPhoto library, it shows 'Prepare the library' and starts the import process, but hangs up to 24% each time.  When I look in the pictures folder, I find a folder called "Photo library" normal which is fully navigable (I don't have to display the contents of the package), and find a file titled 'Masters' who is the same size as the iPhoto 'Originals' folder.  I then tried to circumvent the import process by default app Photos, creating a new library, and then import the file of masters - it finds about 9 100 files to import, short of 9 500 originals).  If I anything I'll miss 400 originals, not to mention the modified in iPhoto versions.

  I found a lot of people pointing out the import problems, but none that hangs up the same and every time, and no one Ive seen publishes the solution.

  What version of iPhoto do you have?

  Where your iPhoto library?

  Abd you are not importing the iPhoto library - you migrate - if she has not moved on initial launch drag the iPhoto library to Photos icon in the Dock

  LN

• DrawStyle.ELLIPSIS problem

  Greetings...

  I'm having a problem with some texts that overlap in a custom list field.  In this list box, I am each line drawing and layout on the top left, top right, a line text below and then a text on the bottom.  The problem I have is that the DrawStyle.ELLIPSIS are not the... If the text on the top-left and top right are too long, and instead they overlap.

  /***********************************************/
  / * * top_left_text top_right_text * /.
  /* ***  -------------------------------------------------  */
  /* ***  bottom_text                                              */
  /***********************************************/

  Is it possible that I can accomplish this?  I need to use DrawText and I need help texts that are left and right aligned who overlap on the other.

  Thanks in advance!

                  offsetY = (this.getRowHeight() - icon.getHeight()) / 2;                g.drawBitmap(1, y + offsetY, icon.getWidth(), icon.getHeight(), icon, 0, 0);                g.setColor(ROW_HEADER_FG_COLOR);                g.setFont(fontBold);                g.drawText(top_left_text[index], icon.getWidth() + PADDING, y + 5, (DrawStyle.LEFT + DrawStyle.ELLIPSIS), width);                g.setColor(ROW_DETAILS_FG_COLOR);                g.setFont(fontPlain);                g.drawText(top_right_text[index], PADDING * -1, y + 5, (DrawStyle.RIGHT + DrawStyle.ELLIPSIS), width);                g.setColor(ROW_DETAILS_FG_COLOR);                g.setFont(fontBold);                secondRow = y + (this.getFont()).getHeight();                g.setColor(ROW_DETAILS_FG_COLOR);                g.drawLine(icon.getWidth() + PADDING, secondRow, Display.getWidth() - 5, secondRow);                g.setFont(fontPlain);                g.drawText(bottom_text[index], icon.getWidth() + PADDING, secondRow, (DrawStyle.LEFT + DrawStyle.ELLIPSIS + DrawStyle.TOP), width);                g.setColor(ROW_HEADER_FG_COLOR);                bottomLine = secondRow + (this.getFont()).getHeight() + 1;                g.drawLine(0, bottomLine, Display.getWidth() - PADDING, bottomLine);
  

  How do you calculate the width parameter in drawText calls?  What is the full width (less fillings and icon) available or only half of it?  This is the only way for drawText to determine whether to use an ellipsis.

  To make sure that your text left and right do not overlap, determine the maximum that you want to give one or the other rectangle and pass the correspondent aX, aY and aWidth settings. This width will be different from what you give to the substantive text, as seems to be there alone.

• Not recognize photos

  any ideas why the software does not recognize on iMac photos on iPhone. I have thousands I want to change

  Not in this case, you need to do is two things. One, what if all you have in your photo library is your iPhone photos, you can import your entire library of current Photos in Lightroom in your pictures folder. You should see an icon called Photos Library.photoslibrary. Control (or right) click on this and select "Show package content" in the context menu you get. Then select the folder of masters who drag the Lightroom icon in your dock. In the Lightroom import dialog box, make sure to select "include subfolders" in the left column. This should show you all of your pictures in the pictures library. Now, you can either use 'Add' to add images to your library in place or use copy to copy the images on. You can also, if your photo library contains much more than photos you want to achieve in Lightroom, select the images you want to enter in Lightroom, then export Photos (use the "non-original" option in the file-> export) in a folder on your desktop. Do drag that folder Lightroom and use the move option.

• Groups of slides model

  My project has masters who are not used, but cannot be deleted. For the purposes of the Organization, is it possible to place these master slides in a group folder? Or hide? Or block so that developers don't accidentally applied to the slides?

  Only in white and quiz master slides can be deleted and they are used for

  very specific slides. Why not create a theme based on the current theme

  When you remove the unnecessary master slides. I'm not aware of the techniques

  to hide or group of them.

• A master page for all documents in a book file

  Hello!

  I have the file book with 7 files document that it contains. I can solve paginating the book with a master page that apply to all document files? I'm lazy and I don't want to create 7 identical templates. Is there a solution for this problem?

  Thanks for any help.

  Yes, master pages names must be exactly the same (case-sensitive and spelling). You choose the document that contains the master page (s) you want to use as source and choose Synchronize master pages in the synchronization options, and then synchronize the book. All the masters with the same name will be updated to match the source file, additional masters who are not present in other files will be added from the source file and page masters not in the source file will be ignored.

• Lightroom RAW mobile

  LIghtroom for iOS still does not support RAW files, or did I miss something?

  If this application can do less than the built in app foto it is IMHO useless for her. Unless you are shooting Jpeg only - but then you probably don't need LR either.

  I found a blog entry from Tom Hogerty on that - unfortunately I can ' t answer it. These are the questions, he mentioned and I must say that I do not understand one of them:

  • We know that our customers often like to shoot in raw format.  It is a large amount of data and experience ingest on current iPads via a Camera Connection Kit is quite slow.
  • The operation of the film on iOS, an application like mobile Lightroom would need to replicate the storage required by the images of a photographer then leave customers with a clumsy removal on film experience to save space.
  • The bandwidth required to move the originals of the iPad with our servers and return to your desktop would be substantial and slow.

  Camera connection kit is fast enough. It works with RAW files as a charm. I have no idea why Adobe should concern the material part. Not at all.

  Yes please rather to duplicate the storage RAW supporting any. I am the user and I want to be in control. I could remove photos in the camera, if I want to. I could buy an iPad with more memory. Yet once, it is not concerned Adobe. .

  Bandwidth? I must necessarily synchronize when I have limited bandwidth. And Yes, it's ok for me, the user to wait when trying to synchronize a large number of data through a bad connection. I want to decide if I want to do it or not. I don't want Adobe to decide that for me.

  These

  its as lame excuses.

  What do you think?

  I think that the Lightroom Mobile workflow is designed to work differently you expect to operate. Lightroom mobile synchronizes with the images that are on the main computer. Adaptations using Lightroom for mobile will be synchronized with the master photos. Photos of masters who reside on the main computer are those that really matter. The files in the cloud are simply copies that are there to enable the mobile edition.

• Dropped audio at the end of one. File VOB (problem with the import. VOBs, I guess)

  Here's what I did. I created several DVDs by recording VHS videos for them. I copied these DVD on my PC, giving me dozens of DVD files with. VOB files in them. I imported the. VOB files for each DVD in Premiere Pro sequences, but still get (which means that every time) dropped audio since the last images of each. VOB file in the sequence. So, in between all of them. VOB file in a video DVD full, there is a very brief break in audio. To be exact, the audio is 'cut' last 13 executives of each. VOB. However, the start of the next. VOB in the sequence begins with the audio as it should (at the very 1st picture). Video is not cut at the end of each. VOB and usually the transitions in the next. VOB smoothly, with no problems. However, occasionally, the latest image of one. VOB looks "glitched" (imagine two sequential images overlapping each other, but within a framework... so that you can see two of the same person who overlap who move from the 1st to the 2nd section). When this happens, the start of the next. VOB file in the sequence is largely pixelated for the first 2 or 3 images.

  I guess it's a problem with the import of first Pro CC. VOB files (she just can't handle.) VOBs). I would like to know if anyone has had a similar problem, and if you have found a solution.

  It is a long-standing problem.  Here's my work around.

  http://www.videohelp.com/software/XviD4PSP

  (Download version 5, not 7.)

  

• SelectOneChoice show the correct value with switching problem

  Hello

  I use JDeveloper 11.1.1.5.0 and I have a non-trivial application of SelectOneChoice.

  Here's my usecase:

  I have to show LOV to set the State according to the connected person.

  So, I implemented attribute LOVs view that each filtered for in the light of the type of person (owner or non-owner).

  I created switcher LOV for attribute as java method in module impl invoked by EL expression adf.source.getApplicationModule () .getTaskStateLOVSwitcher (adf.object, CreatedByIdFk);

  to get connected user binded query parameter id.

  	public static String getTaskStateLOVSwitcher (ViewRowImpl, String createdById, time stamp dateInsert vri) {}
  	ViewObject vo = vri.getApplicationModule () .findViewObject ("TaskViewParTaskTypeIdEx1");
  	String userId = getBindValue (vo, "BindProcessedByUserId") m:System.NET.SocketAddress.ToString ();
  	Output string;
  	If (createdById.trim () .equals (userId)) {}
  	output = "LOV_TaskStateIdFkOwner";
  	} else
  	output = "LOV_TaskStateIdFkNotOwner";
  	return output;
  	}

  I've used this many fragments of jsff perspective.

  There are fragments where it works fine (but I still don't understand why the switch method is called 3 times)

  And there are fragments where it fails. When there are two lines with different LOV to show SelectOneChoice shows an incorrect value.

  I can see the newspaper that LOV switcher method is called 6 or more times and first 3 times it works with values previously selected line and next time, it runs with the current line.

  He result is SelectOneChoice sets the value of the line previously selected in the first round and goes the LOV index.

  I found in the < getViewPort > ADFc log < ControllerState > message: no port view found ID...

  Is the source of the problem and what is the solution?

  Thank you.

  After eliminating all the differences between 'good' and 'bad' fragments I found a problem in the fragments of masters who defined a real line of iterator.

  Define RangeSize = 10 (not 25) table completely setting to change this behavior in common sense.

• insertion of a page in a facing pages document

  I'm working on a book in InDesign CS4 using facing pages. I've set up a master page with automatic page numbering and a text box on each page. All the elements are locked. I'm at a point where I have a number of pages completed by text and images. I need to insert a page, let's say that on the right, in the middle of these completed pages. When I do this, the following pages go to the correct page (on the right side and left side). If I add 2 pages, everything works fine. Also, if I unlock text boxes in master pages and then add a page, everything is going well except that I noticed that I get master (the original and the page) additional text boxes. How can I insert a page?

  Thank you!

  Basically, it's like this in the code. If you use a text frame and text in place, governing is replaced on the page of the document. Permutation of the sides reaffirmed the master and you get a new picture of master in addition to the ovveridden one. It's a compelling argument for NOT using frameworks of masters, who are completely unnecessary for most types of projects, implementation of the margins to set the text box works great for automatic text flow.

  There is a plugin that could help you, however. Take a look at http://in-tools.com/plugin.php?p=2

• Master within a Master

  I cannot find any information on this and have been wanting to do this for years...

  Can I configure several masters who share a common point? I use InDesign to create presentations that have been dated on each page. I use the different masters 5-8. Currently, I have to go to each master to change the date. Not too bad, but if I could change one place, it would be even better...

  Thank you.

  jordesign3 wrote:

  Thank you. In fact, I based all the masters of the original, so they are based on A in this case. But if I change the date on A Master, it does not change the date on the other masters... Maybe I'm missing a step?

  You outweighs the date field on the master of the child?

• Must use MERGE, COPY or UPDATE to restore data

  Database:
  Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64 bit Production
  PL/SQL Release 9.2.0.4.0 - Production
  CORE Production 9.2.0.3.0
  
  Problem:
  I messed up a field incorrectly updating a subset of records that should not be touched. We can not easily restore the domain, due to the backup procedure we use.
  
  Another way to solve the problem, I want to copy the values of the Master Routing Table and place on the work order routing table.
  So, theoretically, we can have 100 separate masters who serve to up to 1,000 records to date in the other table.
  
  I can't use the standard update to do this, and I couldn't properly queries using nested in an update statement. I also have problems with the help of a merger.
  This problem is not unique (I'm sure) so I need to know what I'm doing wrong.
  
  Help, please.
  
  Fusion:
  

  MERGE INTO wo_rtg
  USING (
  select wo_rtg.ccn,  wo_rtg.mas_loc,  wo_rtg.wo_num, wo.item, wo.revision,  wo_rtg.wo_line,  wo_rtg.operation,  wo_rtg.oper_type, wo_rtg.op_fix_lt
                           from (( wo inner join wo_rtg 
                                    on ( wo.ccn = '1'
                                            and  wo.mas_loc = '1'
                                             and wo.ccn = wo_rtg.ccn
                                             and wo.mas_loc = wo_rtg.mas_loc
                                             and wo.wo_num = wo_rtg.wo_num
                                             and wo.wo_line = wo_rtg.wo_line
                                             and (wo.status = 'R' or wo.status = 'I')
                                             and wo_rtg.oper_type = 'O'
                                             and wo_rtg.op_fix_lt = 5
                                             --and wo.item = '114R2050-35'
                                             --and wo.revision = 'AD'
                                           )
                                   ) --1
                                      inner join routing rt
                                  on ( wo.item = rt.item
                                        and wo.revision = rt.revision
                                          and wo.ccn = rt.ccn
                                          and rt.bcr_type = 'CUR'
                                          and wo_rtg.operation = rt.operation
                                          and trim(rt.bcr_alt) is null
                                      )
                                 ) --2                                    
  ) e
  ON ( wo_rtg.ccn = e.ccn
  and wo_rtg.mas_loc = e.mas_loc
  and wo_rtg.wo_num = e.wo_num
  and wo_rtg.wo_line = e.wo_line
  and wo_rtg.operation = e.operation
  and wo_rtg.oper_type = e.oper_type
  )
  WHEN MATCHED THEN
  UPDATE SET r.op_fix_lt = e.op_fix_lt
  WHEN NOT MATCHED THEN 
  insert into reason VALUES ('1','test', 'test test test','test','test','test',1,1,1,sysdate,1,sysdate,'id');
  WHERE r.oper_type = 'O'
  and r.op_fix_lt = 5

  I tried WITHOUT the unmatched WHEN & clauses insertion and the transaction does not work.
  __________________________________________________________
  Update syntax:

  update wo_rtg
  set wo_rtg.op_fix_lt =
  (
  select rt.op_fix_lt
       from (( wo inner join wo_rtg 
                                    on ( wo.ccn = '1'
                                            and  wo.mas_loc = '1'
                                             and wo.ccn = wo_rtg.ccn
                                             and wo.mas_loc = wo_rtg.mas_loc
                                             and wo.wo_num = wo_rtg.wo_num
                                             and wo.wo_line = wo_rtg.wo_line
                                             and (wo.status = 'R' or wo.status = 'I')
                                             and wo_rtg.oper_type = 'O'
                                             and wo_rtg.op_fix_lt = 5
                                             --and wo.item = '114R2050-35'
                                             --and wo.revision = 'AD'
                                           )
                                   ) --1
                                      inner join routing rt
                                  on ( wo.item = rt.item
                                        and wo.revision = rt.revision
                                          and wo.ccn = rt.ccn
                                          and rt.bcr_type = 'CUR'
                                          and wo_rtg.operation = rt.operation
                                          and trim(rt.bcr_alt) is null
                                      )
                                 ) --2                                    
     ) -- nested select 
  Where (wo_rtg.ccn, wo_rtg.mas_loc, wo_rtg.wo_num, wo_rtg.wo_line, wo_rtg.operation, wo_rtg.oper_type)
  in ( 
  select wo_rtg.ccn,  wo_rtg.mas_loc,  wo_rtg.wo_num, wo.item, wo.revision,  wo_rtg.wo_line,  wo_rtg.operation,  wo_rtg.oper_type, wo_rtg.op_fix_lt, rt.op_fix_lt as rtlt
                           from (( wo inner join wo_rtg 
                                    on ( wo.ccn = '1'
                                            and  wo.mas_loc = '1'
                                             and wo.ccn = wo_rtg.ccn
                                             and wo.mas_loc = wo_rtg.mas_loc
                                             and wo.wo_num = wo_rtg.wo_num
                                             and wo.wo_line = wo_rtg.wo_line
                                             and (wo.status = 'R' or wo.status = 'I')
                                             and wo_rtg.oper_type = 'O'
                                             and wo_rtg.op_fix_lt = 5
                                             --and wo.item = '114R2050-35'
                                             --and wo.revision = 'AD'
                                           )
                                   ) --1
                                      inner join routing rt
                                  on ( wo.item = rt.item
                                        and wo.revision = rt.revision
                                          and wo.ccn = rt.ccn
                                          and rt.bcr_type = 'CUR'
                                          and wo_rtg.operation = rt.operation
                                          and trim(rt.bcr_alt) is null
                                      )
                                 ) --2                                    
  ) 

  {color: #ff0000} ORA-01427: einreihig subquery returns multiple rows
  
  {color} {color:#000000}__________________________________________________
  * Just to show you an idea of what I {color: #00ff00} + really + want. * {color}

  update wo_rtg
  set wo_rtg.op_fix_lt = rt.op_fix_lt 
  from (( wo inner join wo_rtg
  on ( wo.ccn = '1'
  and wo.mas_loc = '1'
  and wo.ccn = wo_rtg.ccn
  and wo.mas_loc = wo_rtg.mas_loc
  and wo.wo_num = wo_rtg.wo_num
  and wo.wo_line = wo_rtg.wo_line
  and (wo.status = 'R' or wo.status = 'I')
  and wo_rtg.oper_type = 'O'
  )
  ) --1
  inner join routing rt
  on ( wo.item = rt.item
  and wo.revision = rt.revision
  and wo.ccn = rt.ccn
  and rt.bcr_type = 'CUR'
  and wo_rtg.operation = rt.operation
  )
  ) --2
  Where wo_rtg.ccn = wo.ccn
  and wo_rtg.mas_loc = wo.mas_loc
  and wo_rtg.wo_num = wo_rtg.wo_num
  and wo_rtg.wo_line = wo_rtg.wo_line 
  and wo_rtg.operation = rt.operation

  Please help! {color}

  I believe that the only difference in 9i (I'm on 10g) is that WHEN WITHOUT MATCHING clause is mandatory and not optional.

  This is why you want to code as follows:

  drop table RMT;
  drop table WORT;
  
  create table RMT as
  select 101 rout_key, 20 val from dual UNION ALL
  select 102 rout_key, 10 val from dual UNION ALL
  select 103 rout_key, -30 val from dual UNION ALL
  select 104 rout_key, 80 val from dual;
  
  create table WORT as
  select 1 pk_id, 101 rout_key, 0 val from dual UNION ALL
  select 2 pk_id, 101 rout_key, 0 val from dual UNION ALL
  select 3 pk_id, 102 rout_key, 0 val from dual UNION ALL
  select 4 pk_id, 102 rout_key, 0 val from dual UNION ALL
  select 5 pk_id, 103 rout_key, 0 val from dual UNION ALL
  select 6 pk_id, 103 rout_key, 0 val from dual UNION ALL
  select 7 pk_id, 105 rout_key, 0 val from dual;
  
  alter table WORT modify pk_id NOT NULL;
  
  merge into WORT
  USING (select WORT.pk_id, RMT.val
         from RMT, WORT
         where RMT.rout_key = WORT.rout_key) tmp
  on (WORT.pk_id = tmp.pk_id)
  when matched then
  update
    set WORT.val = tmp.val
  when not matched then
    insert (WORT.pk_id,
            WORT.rout_key,
            WORT.val)
    values (NULL,
            NULL,
            NULL);
  
  select * from WORT;
  
  drop table RMT succeeded.
  drop table WORT succeeded.
  create table succeeded.
  create table succeeded.
  alter table WORT succeeded.
  6 rows merged
  PK_ID                  ROUT_KEY               VAL
  ---------------------- ---------------------- ----------------------
  1                      101                    20
  2                      101                    20
  3                      102                    10
  4                      102                    10
  5                      103                    -30
  6                      103                    -30
  7                      105                    0                      
  
  7 rows selected
  

  Because our USING clause represents a join between the tables, it will never be a WHEN NOT MATCHED in terms. So put us in a dummy INSERT with all NULL values. I added some data to show that even with the lines without correspondence nothing will be inserted and a NOT NULL constraint on pk_id just to show that it is not checked.

• Opening, lack of masters after importing the iPhoto library

  I have a large (about 14 000 pictures) iPhoto library, which seems to work correctly when opened directly into iPhoto 9.6.1 or directly in Aperture 3.6. When open in one of those, all the "originals" or the "masters" can be located, and there is no problem.

  I want to merge this library in a large Aperture library. I tried to do this using file-> import-> library, who ran with no error message. After the work of import, most photos imported into iPhoto show an error icon, indicating that they are absent from their master. There are about 9 500 photos with masters missing, according to opening. I can use the tool to "Locate the referenced files", and then I see all these pictures with masters missing have "null" as the name of the volume in their way, and their path begins with the year of the import job. Path of the example:

  2012/01/03/20120103-185643/DSC02345. JPG

  To reconnect the master, I can navigate to the iPhoto library container and click the 'Masters' folder in the library container. As soon as I click on the folder of "Masters", the tool referenced files locates the record (since the rest of the path matches). See the screenshot:

  This method will not work for me, however, because the button "Log everything" does nothing. It will reconnect only one photo at a time, then the development of the upper part of the tool files referenced changes, and I need to re - click on the missing file missing, re - click the 'Masters' folder and click on reconnect again. I can't make that 9 500 times.

  Then why Aperture loses these masters when it is important to iPhoto? Is it possible to reconnect all of this?

  Then why Aperture loses these masters when it is important to iPhoto? Is it possible to reconnect all of this?

  The problem seems to be the Masters folder offline state.

  have you tried to repair or rebuild the iPhoto library before trying to merge into the Aperture library (Aperture 3 User Manual: repair and rebuild your Aperture library)?

  is the library with the iPhoto in question on an external disk library?  If so, how the hard drive is formatted?