Max length for custom metadata.

Similar Questions

• Error compiling FPGA-61332: the length of a line to < "file.vhdl" > is too long for xilinx 10.1. Length: < length > Max Length: 4150

  Hello

  When compiling a fairly basic FPGA VI, I get the following error:

  61332 error occurred in niFpgaCompileWorker_ProcessStatusPipe.vi:1<><>

  Possible reasons:

  LabVIEW FPGA: An unexpected error occurred with the build tools. You try to compile the FPGA VI again could solve the problem.

  The length of a line in "NiFpgaAG_0000002e_WhileLoop.vhd" is too long for xilinx 10.1. Length: 32845 Max length: 4150

  Departure time: 17:22:06
  End time: 17:22:12
  Total time: 00:00:06

  Apparently, the vhdl code generator OR forgot to add some CR + LF in the intermediate files. How to work around this bug?

  Kind regards

  Lukas

  Hi Lukas.

  When LabVIEW compiles a VI, the VI is converted into virtual hard disk to be compiled into a file bit by Xilinx.  As you have already understood, this error indicates that a line of code vhd had a length of 32 845 characters, which exceeds the maximum length of 4150 characters for the Xilinx 10.1.

  Although 32 845 characters is very long, it is possible that this is due to the codification of LabVIEW rather than a bug. Some common causes of this problem include large enums, a matrix, or clusters in the code.  Please check in your code.  If you have no luck, please attach a screenshot of the code.  I hope this helps!

  Kind regards

  Dayna P.

  Technical sales engineer

  National Instruments

• Looking for custom in the context of records metadata

  Hello

  I stumbled on exactly the same problem as in Search by metadata custom in frame files - search folders, custom metadata settings, but can't post on this because it to archive.

  Could someone point me to a solution allowing to customize the search for custom created settings?

  Thank you

  Hello

  First thing, it is that the custom metadata is not available for file metadata Framework. The "Values of metadata" section view is for content items that are present in the files. So, if you want to search by content of this list, it is not possible, because these values are attached to content.

  For the search of files, you can use FLD_FOLDER_SEARCH service, as well as its required parameters and the items in the list.

  Thank you

  Srinath

• The location of the custom metadata fields

  I'm trying to locate the custom metadata fields. Consider a custom metadata field where his dname = xPracticeWork and dCaption = practical work.

  I am trying to locate it using the old way.

  When to activate the settings regional french user and see this metadata field appears in English.When I turn on the location in the information system Audit, it is said

  unable to find string 'fr.Practice Work'

  So I tried including < @fr. The practice of work =Work practice@ >

  but he throws and error message saying unknown resource definition tag

  If I do the dCaption as PracticeWork and try to < @fr. PracticeWork =Work practice@ > it works absolutely well.

  It seems that the practical work being two letter word definition tag allows no space.

  Can someone please help me on this.

  
  

  Thank you

  Vanina
  

  It's very simple, you write a string that you want to display in the form of legend (I use this trick in the profiles, if I want to rename a metadata custom field exist for the type having a different meaning), or write you a string Id cannot contain spaces, which solved somewhere, usually a custom - component see what thread change location String for details how to create a resource exploitation translations.

• Custom metadata plugin: how to execute code automatically new files?

  I have a goal to see some fields of Fuji-specific metadata in Lightroom. I can see these when I run Fuji by Exiftool files from the command line. I would like to be able to filter and research on them. (Before you go, if anyone knows of an existing plugin that will import the EXIF Exiftool arbitrary, please let me know.)

  I can write a metadata custom for this plugin. Definition of custom fields and tagset is clear for me. I've done this before. What is not clear to me is to know how to trigger the code that parses the files for metadata, and imports. Can I get the user to do so manually by choosing images, then using a menu option - it's easy. Is it possible to automatically invoke instead? You say, when the files are imported?

  Other opinions on how this could work smoothly are welcome. Thank you

  DB

  There used to be an ExifMeta plugin that would automatically synchronize one or more fields of image metadata custom in the catalog, available for viewing, filtering, and research.   Unfortunately, the developer has disappeared, as well as its plugins, about 1.5 years ago.

  The Data Explorer plugin allows you to view and search for fields of arbitrary metadata accessible to Exiftool.  But you have to run it manually whenever you want to display the current values.

  What is not clear to me is to know how to trigger the code that parses the files for metadata, and imports.

  The plugin must have a background task (or tasks) that runs periodically and checks new files and files that have changed since the last time it extracted their metadata.  This can be done quite effective, but it takes effort.

  The background task can scan the new photos using the catalogue: getAllPhotos() and comparing the result with the last time he called it.   I guess that every 5 seconds would not consume any noticeable CPU.  It could be implemented in 10 or 20 lines.

  If you care about the plugin noticing changes made to the metadata of files once they have been imported into LR (for example because an external application changed), it would be harder to do in a reasonable time.  The plugin can save the modification date of the metadata for a photo file whenever it extracted metadata.  The background would periodically scan all the pictures in the catalog, search for files whose current modification date is more recent than that recorded in the custom metadata.   I don't have a good idea for the cost of CPU that it would impose, but I guess you could probably do 10 files per second without significant load.  This would mean that it would take several hours to sweep a catalog of files of 100K.   (Windows and OS X have mechanisms to notify applications of changes to the file system, but these mechanisms are not available through the SDK of course).

  With more complexity, you might also have a background task that periodically uses catalog: findPhotos() to run the smart collection criteria "Medata status is changed on the disk or the status of metadata is detected conflict."  This would be grafted onto the mechanism from LR to notice that files have changed and that he would be very low cost. You can run this query every few seconds without significant impact.  However, there is a chance that this task would be to miss a few modified photos, for example if the user did metadata > read metadata file before the task had a chance to see the file has changed.  So, you would still need the task that periodically scans all the photos in the catalog.

  I never asked the developer to ExifMetadata exactly what he did on this point, but I'm guessing that something similar.

• How to create a custom metadata fields?

  In the library module, to the left of the label of "Metadata" next to the winding open, is a drop down menu which starts with "Default" and then has a list with ensembles such as 'DNG', 'EXIF', etc..

  Two questions or requests:

  (1) I can see ALLLLLLLL of metadata.  Right now I am out to ExifTool and suck the data I need and hand build that.  Necessary special last night, I needed the rotation of the camera that is in the metadata (twice), but I do not know how to see the inside of Lightroom.

  (2) I want to be able to add to the list I described with my own set of metadata fields.  For me, that would be lovely.  There are tons and tons of fields but I am interested by only a few, but I'm sure that each person is interested in a different game.  It would be nice to be able to customize the fields that are displayed.  Of course, once you go too far, you can also add the ability to appoint the sets and save them for later use.

  Or the other of these elements is possible in Lightroom 4?  (or 5?)  If so, can you teach me how?

  Thank you

  Perry

  ExifMeta to all exif metadata support.

  DevMeta for all parameters of development in the form of metadata.

  TextMeta for the path of file metadata...

  CustomMetadata set, well, the custom metadata.

  Look at a Preset editor Jeffrey Friedl of metadata to define custom metadata look a presets.

  John Ellis' AnyFilter you can do research of chip-type of non-text metadata (which is stored as a metadata text, for example all the metadata plugin).

  Internet research to find these plugins.

  Feedback from Adobe to vote for these features natively Forum so it does not use plugins:

  http://feedback.Photoshop.com/photoshop_family/products/photoshop_family_photoshop_lightro om

  SoC

• Support of Inline actionscript for custom component events

  Is it possible to support actionscript inline for custom component events?
  
  For example, let's say I have a custom component that distributes a refreshed event called. Is this possible via mxml to bind the event to actionscript inline? You can do this with components that come with Flex 3, but did not do with the events of custom component.
  
  Something like: < com:custom_component id = "cus1" refresh = "{Alert.show ("the refreshed component!") ;}}" "/ >

  You need create metadata for the event in order so that it can be accessed online, when you declare the custom component:

• PS: how to specify length for PARAMETERS inside Ms itself?

  Hello
  I have a procedure as in the example below and just curios, how do I specify length for in_param be varchar2 (10) Ms itself doesn't execute code?
  I see that, by default, it affects 200 b, but do not need that much.
  I try to put as many defintion in MS itself to save the efforts made for the execution part, which will be managed by other people? Is this possible? Or should I change just not run code and then give it to the customer?
  
  
  -------------
  create or replace procedure (sp_ryba_cust_101)
  in_custID IN varchar,
  in_exec IN IS number
  t_custID varchar (10);
  number of t_exec;
  
  BEGIN...
  
  END...

  In order to make practical use, you declare the subtypes in a more comprehensive manner. For example

  create or replace package my_types is
   subtype my_subtype is varchar2(10);
  end;
  

  create or replace procedure p(a in my_types.my_subtype) is
  begin
    null;
  end;
  

  Often, the input parameters will be either original, eventually be stored in or otherwise refer to a table column. When this is the case, use the % type declaration. There is still no verification of size, but it is clear to everyone that the setting is good for.

  create or replace procedure p(a in user_tables.table_name%type) is
  begin
    null;
  end;
  

  If you want to introduce size check, so that with an overhead projector. For example

  create or replace procedure p(a in user_tables.table_name%type) is
   va constant user_tables.table_name%type := a;
  begin
    null;
  end;
  

• Transfer photos with custom metadata

  I have all my photos on my Macbook pro (Photos app) and held them with faces and custom metadata.  I would like to transfer most of them to my iMac (photos app).  I tried various methods, including parachuting, but I lose the metadata.

  is it possible to keep custom metadata?

  is it possible to keep custom metadata?

  The only way to EVS all the metadata transferred another Mac photo library. Make a copy of the photo library on an external drive and copy the complete library to your other Mac.

  If you want to only copy the selected photos to a library on the other Mac with included metadata, export photos using the "file > export". Who will save most metadata (places, keywords, titles, descriptions), but you cannot transfer the faces in this way.  Photo library not even iCloud will now synchronize albums faces between macs or mobile devices.

• What is the max memory for an iMac in early 2008

  What is the max memory for an iMac in early 2008? MacSales.com shows a 6 GB kit, but crucial only shows a 4 GB kit.

  Thank you

  John

  The computer iMac (early 2008) has two SDRAM slots in the bottom of the computer and comes with at least 1 GB DDR2 SDRAM installed into a slot. The maximum amount of RAM you can install in the computer is 4 GB (a 2 GB SO-DIMM in each slot).

  Source:

  iMac (early 2008): specification of memory - Apple Support

• Size max HD for Pro 4600

  I have a Satellite Pro 4600 with bios version 2.6. Anyone know what's the max hd for this size?

  Hello

  As far as I know this laptop comes with 10 GB and 20 GB hard drives.
  I found information that this device supports 30 GB HARD drive.

  Best regards

• Please add support for channels DMA between RT/FPGA for custom types

  It is a request than a question at OR. Please find a way to provide support for custom types when data transfer between RT/FPGA. Even an ability to mount a type complex in a bit array and proceed with a redesign to the custom side type FPGA would be acceptable. Break my configuration in primitive data is completely unrealistic. So, I consume large amounts of FPGA resources passing data through the method of the façade. THX.

  There is an existing idea for this. Please Kudo it if you do not want to see this!

• How to fix "error 2738... could not access VBScript runtime for custom action' tries to apply the update to my service of Incredimail.

  How to solve the following problem found while trying to download an upgrade of my Service of Incredimail.

  "Error 2738...". could not access VBScript runtime for custom action"

  The most likely cause is the antivirus bloocking the script.

  Check your AV settings (AV is?)

• I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

  could not access vb run time for custom action script

  I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

  Hello

  I suggest you run the fixit and see if it helps:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  It will be useful.

• Problem of uninstalling with the error 'could not access VBScript Runtime for custom action'

  I'm having a problem uninstall a program. I'm getting repeatedly blocked in error: "could not access VBScript Runtime for custom action.  That means this error in uninstall a program? Would appreciate a fix for this. The program is called Soluto.  Thank you.

  P.S. I tried as admin and type regsvr32 vbscript.dll then regsvr32 jscript.dll in the command prompt.

  As well as their registration as an administrator, you may need to remove the entries for them in HKEY_CURRENT_USER.

  See:

  http://blogs.msdn.com/b/astebner/archive/2007/06/07/3151752.aspx

  Also, make sure that your antivirus software is not blocking scripts.