Maximum number of questions in a Quiz of 100?

Similar Questions

• Install HRCS9.0 and PT8.53 with Linux question: the files intiPT853.ora and initHRCS90.ora: exceeded maximum number of DB_FILES

  People,

  Hello. I installed PeopleTools 8.53 with Oracle Linux 5.10 successfully. The PeopleTools everything works fine in the browser at the beginning.

  After that I installed HCM and Solution Campus 9.0 Instance of database named HRCS90 in Linux successfully, PeopleTools 8,53 Database Instance PT853 can not be mounted. The error message is less to:

  SQL > startup
  ORACLE instance started.

  Total System Global Area 538677248 bytes
  Bytes of size 2146024 fixed
  528482584 variable size bytes
  4194304 buffers of data bytes
  Redo buffers 3854336 bytes
  ORA-00059: exceeded maximum number of DB_FILES

  In the home/user/OracleDB_Home/dbs/initPT853.ora file, its parameter db_files has 3 values: small 400, 1021 medium and large 1500. The initial value is 1021 and it works correctly at the beginning.  But after the implementation of another instance of HRCS90, the above error message and instance PT853 is not mounted. I change the value of db_files 1021 to 1500 in the initPT853.ora file and restart the Linux operating system. But get the same error as below:

  SQL > startup
  ORACLE instance started.

  Total System Global Area 538677248 bytes
  Bytes of size 2146024 fixed
  528482584 variable size bytes
  4194304 buffers of data bytes
  Redo buffers 3854336 bytes
  ORA-00059: exceeded maximum number of DB_FILES

  
  In the home/user/OracleDB_Home/dbs/initHRCS90.ora file, its parameter db_files has 3 values: small average 80, 1500 400 and large. I use db_files = 400 and it works properly. I start instance HRCS90 right after the above error message as below:

  SQL > shutdown immediate
  ORA-01507: database not mounted
  ORACLE instance stops.

  SQL > exit
  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.1.0.6.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options

  [user@userlinux bin] $ export ORACLE_SID = HRCS90
  [user@userlinux bin] $. / sqlplus / as sysdba

  SQL * more: version 11.1.0.6.0 - Production on sat Nov 23 12:40:02 2013

  Copyright (c) 1982, 2007, Oracle.  All rights reserved.

  Connect to an instance is idle.

  SQL > startup
  ORACLE instance started.

  Total System Global Area 538677248 bytes
  Bytes of size 2146024 fixed
  528482584 variable size bytes
  4194304 buffers of data bytes
  Redo buffers 3854336 bytes
  Mounted database.
  Open database.

  SQL > select * from psdbowner;

  DBNAME OWNERID
  --------          --------
  HRCS90 MYNAME

  SQL >

  
  As we see above, the HRCS90 instance work corretly, and PT853 does not start. Parameter DB_FILES the file initPT853.ora has a problem.

  My question is:

  1021 and 1,500 is not enough for a starting PT853 instance, what value should be used for the the file initPT853.ora DB_FILES?

  Thank you.
  
  

  user8860348 wrote:

  People,

  Hello. I installed PeopleTools 8.53 with Oracle Linux 5.10 successfully. The PeopleTools everything works fine in the browser at the beginning.

  After that I installed HCM and Solution Campus 9.0 Instance of database named HRCS90 in Linux successfully, PeopleTools 8,53 Database Instance PT853 can not be mounted...

  I'm sorry, but I do not understand that "Instance" means here.

  > In the file home/user/OracleDB_Home/dbs/initPT853.ora, its parameter db_files has 3 values: small 400, 1021 medium and large 1500.

  Are you do not use a spfile? The file actually contains 3 values? What's the latest? Have you checked the value in the database side "see the db_files parameter?

  > But after set up another instance of HRCS90, the above error message and instance PT853 is not mounted

  Still, I don't know what that means.

  > In the file home/user/OracleDB_Home/dbs/initHRCS90.ora, its parameter db_files has 3 values: small average 80, 1500 400 and large. I use db_files = 400 and it works properly.

  Once again, 3 values? What's the latest? Have you checked the value in the database side "see the db_files parameter?

  > As we see above, the HRCS90 instance work corretly, and PT853 does not start. Parameter DB_FILES the file initPT853.ora has a problem.

  Again, I don't understand what exactly are HRCS90 and PT853. Can not help.

  > 1021 and 1,500 is not enough for a starting PT853 instance, what value should be used for the the file initPT853.ora DB_FILES?

  I am sure, you have not a problem with this setting, 1500 files in the database is fairly large. Recently, I've built a demo, the default 1021 was ok for me. You should have done something wrong somewhere.

  Nicolas.

• Number of numbers separated from practice quiz on "Number of Questions"

  I have a program that has a practice (4 questions) and a final quiz (25 questions). They have been developed both slides in question, but I would like to only the section final quiz score report. I put question 4 in the practice section to score 0 and unaware, but before the end of the final quiz, the total number of questions shows that 29 (25 + 4 quiz practices).

  I so create a false text box saying "many Questions: 25" to fool users, but I can't ask that even cheat solution to the "correct Questions. The number is not editable through JavaScript files in the SCORM package...

  A similar question was posted here a year ago with no solution to it. I wonder if something has changed since then and if anyone knows how to solve this problem.

  Here is a picture of my screen with the fake text box saying total issue is 25. The score is again properly (4 points each and with 24 correct on 25, gets the user 96 points). But the correct questions showed that 28 of the 29 (25 + 4).

  

  Thank you!

  Hello

  There is no way to change the system variables such as the number of questions. If you, like me, it would be really interesting to have such a control fill a feature request (did ask about it already myself).

  For now, the only solution I see and use myself, creates no-to-be-scored questions using standard and interactive objects and advanced actions (e.g. to show your comments). Because these issues do not have to be striped or reported, Quiz system variables will then contain the good values for the final Quiz created with Question slides. If you want to view results, the 'partition' slide may also be created with these objects and advanced actions.

  The thread, you said it, was also for CP4, nothing has changed since. And I'm sorry, but also in the soon that will be launched in the next version (CP5) there is no way to change the system of variable Quiz AFAIK.

  Lilybiri

• Facing the question with the Maximum number of connections Timesten

  Hello

  In my project, I need to increase the maximum number of connections that timesten offers me. So, I changed the setting of the nucleus as shown below in the file/etc/sysctl.conf.

  kernel.SEM = 655 670720 128 1024

  The intention here is to get 500 connections max. But even after this setting too, I get only 477 connections. I don't understand why this is happening. Someone help me understand what is happening here.

  In above configuration, my hypothesis is that 155 semaphores are reserved for internal use of timesten and remaining 500 will be available for me, but this isn't the case. Please, help me in this aspect to understand why I get only 477 connections instead of 500 connections.

  Quick help is very appreciated

  Thank you

  Agnes

  Hi Agnes,.

  Thanks for the release of ttStatus. He explains what is happening and confirms my suspicions (second).

  The setting of the 'Connections' in the DSN attribute defines the limit superior on user connections; that is, connections by applications and tools such as ttIsql, ttMigrate etc etc. There is also the concept of connections 'system' (subdaemon, replication agent, agent of cache etc) that do not count against the total "Connections."

  In your case, the database is in fact properly configured for a maximum of 500 user connections. However, as you can see on the first ttStatus, you already have 23 application direct mode of 4 different connections methods of Java (which leaves the available user 477 connections). I of course have no idea what these applications are but probably your. This means that you are able to open additional connections a 477 application before arriving to the configured limit of 500. And that's exactly what we see; When you run your test application (what happens to connect via client/server), it reached 477 connections and then impossible to create more. As expected.

  Therefore, to allow connections you must:

  1. stop the database (replace ramPoilicy by manual (or inUse), stop all applications, stop the replication agent, unload from memory if the policy is manual)

  2. change the value for connections in the attributes of the DSN to a higher value (perhaps 600) - also, you need to make sure that OS semaphores are high enough to allow this number of connections.

  3. load the database back in memory, start the replication agent, starting applications.

  A a tied note, use of ramPolicy 'always' is not encouraged. In addition to the scenarios 'manual' is a better choice. We can "always" deprecated in a future release.

  Chris

• Connect the question: "you can't access this meeting because you are already attending the maximum number.

  Hello

  Since Monday, we often get the error message "you cannot access this meeting because you are already the maximum number of authorized meetings (2). "Please close one of your meeting rooms, open" when you try to enter in the meeting rooms.

  We checked several times and we * never * have other meeting rooms to open, not even to other accounts.

  We also does not change our subscription or our account.

  We then logout / login several times before we can enter the meeting room.

  It is very annoying, because we use Adobe Connect to give training courses, and teachers can not connect.

  We thought is a temporary problem with Acrobat Connect Pro, but as said, he dwells on since Monday, March 18, 2013.

  Can someone help out us here?

  Thank you

  Jorma Hello,

  Thanks for your reply.

  If it is due to a change of political license by our Adobe reseller application. They were not informed of this change :/

  So nothing to do with Acrobat Connect Pro is.

  All the best

• NiDAQmx limits the maximum number of analog samples which can be read / buffer?

  I try all the time on a USB-6363 to 1000 Hz 2 channels analog samples.  Everything works until I have started to increase the number of samples to read only once in DAQmxReadAnalogF64().

  I have set up the buffer in DAQmxCfgSampClkTiming() like twice the amount of samples, I want to read at some point.

  Up to about 8000 samples (128 000 bytes: sizeof (double) x 8000 x 2ch) it works and read call returns without delay once all about 8 seconds.  Increasing the number of samples other than that, I can no longer read the data (the DAQmxReadAnalogF64() always holler times).

  Question: am I running in a limit on the maximum number of samples that can be read or buffered... maybe a DMA limit any?  What determines how big you can make the buffer in DAQmxCfgSampClkTiming()?

  Maybe it's not obvious, according to the documentation, but if you look at the output value of the parameter samples per channel function DAQmxReadAnalogF64 reading, you'll see that when it times out, he reads what was available when it has expired. So if you're always calling this function, and your timeout value is too short, then you'll always be timeout, but you will always catch all samples. You can view this as the function will return when the buffer is full, or the timeout is reached. That's why we have provided an exit indicating the number of samples read.

  As a general rule, ask not read like this with DAQmx. I would recommend registering a callback for EveryNSamples (there is an example that's bundled with the CVI on how to do this), or by specifying a longer period than what it will take to gather real that many samples (in your case, 8000 samples at 1 kHz would be > 8 seconds). The main problem with the polling stations with a short time-out is that you should ignore errors that is not recommended.

• The maximum number of users on a server terminal server

  Hello

  Can someone tell me the maximum number of TS client access licenses can be installed on a server terminal server. I use windows 2008 server r2 64 bit.

  In fact, I want to put more than 500 users on this terminal server server, I'm looking for help if as many users can access the server terminal server 2008.

  [Parts of this post deemed to be advertisements have been removed by Moderator]

  Hi Brij,

  Welcome to Microsoft Community and thank you for the query display. When you use Windows 2008 Server R2, I suggest you to post the question in this forum for help.

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

  Hope this information helps. If you have other issues with Windows, feel free to post here at Microsoft Community.

• How to increase the maximum number of TCP connections simultaneously

  Hi all

  I hope some can help; I am trying to use an XP machine to machine IPERF Linux... we tested loads up to 5 (-P5) outgoing connections using XP, but now we want to move to 8... but the connection keeps flat for 3 of them. We tried the 6 and 7, again same problem, anything 5 + said "breaking" we believe that this is a problem in windows limiting the the maximum number of concurrent/simultaneous TCP connections.

  Thanks in advance

  Kind regards

  PJ

  Hi APKJ,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Windows XP IT Pro category

• I am told by Hotmail I have the maximum number of accounts.

  original title: Hotmail help

  Hello about a week ago I deleted a gmail account forward my hotmail account, and now it says I have the maximum number of accounts, even though I have 3. Why this is happening and what to do?

  Hi awsomeg,

  The best place to ask your question of Windows Live is inside Windows Live help forums. The experts he specialize in all things, Windows Live and I would be happy to help you with your questions! Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.

• Maximum number of contacts in a list of contacts (Windows mail)

  I would like to know what is the maximum number tha of contacts, I can create a list of contacts.

  I use Windows mail (Vista)-

  Thank you

  João Carmona

  Goofd morning.

  My question has been asked on bad terms.

  What I want to know is the maximum number of contacts that can be supported a contact group.

  Thank you

  João

  Hi João,.
  I have found no document written on a maximum number of contacts but some ISPs have a limit on the number of recipients in a message in order to care.

  Andrei Andrade TFC, TCSP, including, MCTS70-620 MCP70-290

• Maximum number of keys.

  Hello

  I would like to know if there is a way to check the maximum number of keys (for example with something similar to screen_get_event_property_iv) on the device.

  In addition,

  screen_get_event_property_iv (screen_event, SCREEN_PROPERTY_TOUCH_ID, &id);)

  allows me to get the ID of the current ID. What is an ID that corresponds to the touch (so, if there is for example 10 keys, id will be between 0 and 9) or does it continue to grow? (for example, whenever a new finger noise inside, id increases, and it could go up to any value, as long as the new keys keep coming).

  My tests, it appears the id doesn't grow, only for sticks for the same set of values and BB Playbook only supports up to 4 simultaneous keys, but I would like to be able to query the number of keys, however.

  If anyone has answers, I'll be very grateful.

  See you soon,.

  Jaime

  A great question!

  It was 4 on PlayBook and can be > 4 on new devices.  Design for 4 would be a good idea for now since you want your application to be usable on all devices.

  I submit this request for the people of libscreen along, because they already know internally what is the max #... It is simply not exposed in any convenient way.  In General, and that the API rule evolve, we want to be able to put as much information in the hands of the developer as possible.

  That being said, nothing can stop your application multitouch great to do something similar to what we see with the calibration of analog joystick... have your app in advance with a "number of fingers on the screen you can press on ' message and sample the max for yourself until a SCREEN_PROPERTY_MAX_MTOUCH practice or similar is available.

  See you soon,.

  Sean

• Cisco 881 - maximum number of VPN tunnels allowed?

  Hello

  I know it sounds simple and easy question, but I can't find the answer anywhere - so here it is: -.

  I need to know the maximum number of vpn tunnels that can manage a Cisco 881.

  (In the context, we have a group of users who work from home and office, so their laptops have the cisco vpn client, I need to know how much of these vpn connections the 881 can manage both before, he died a death)

  Host-, I read somewhere a line that State maximum number of users is 20 but believe it was referring to a VOIP service.

  Thanks in advance.

  The 881 supports 20-tunnel IPSec:

  http://www.Cisco.com/en/us/prod/collateral/routers/ps380/data_sheet_c78_459542_ps380_Products_Data_Sheet.html

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• ORA-00020: maximum number of processes exceeded

  All respected DBAs,

  Today I faced an issue. I found below statement alertlog file and when I tried to connect to the base of this error came on the command line.

  "ORA-00020: maximum number of processes exceeded 150.

  Then I restarted my Oracle Service, connected to the database and questioned

  select * from v$ resource_limit and found this result.

  Process

  CURRENT_UTILIZATION = 52

  MAX_UTILIZATION = 61

  INITIAL_ALLOCATION = 150

  LIMIT_VALUE = 150

  Sessions

  CURRENT_UTILIZATION = 53

  MAX_UTILIZATION = 60

  INITIAL_ALLOCATION = 248

  LIMIT_VALUE = 248

  If my process is exceeded then why MAX_UTILIZATION = 61 only? Please, help me to understand this.

  This view is dynamic (it will reset on reboot) and restart you the database.

  So you can only say that after the restart of the database the number of processes is already 61.

  -------------

  Sybrand Bakker

  Senior Oracle DBA

• Maximum number of Service requests

  Hi all

  Greetings for the day!

  After continuous follow-up with my client, I recently got the number of the ITUC, using which I created ID metalink and triggered several SRs for pending open questions and began following. However, the management insisted on open SR only for critical questions, in order to avoid the maximum number of service requests.

  It intrigued me, according to my knowledge, there is no limit or value set, who says you can't create more than Nnn number of service requests, please let me know if it there in a. I tried to search for the same thing on the forum as well as google, but did not find. Furthermore, another application that came to my mind was, if I have the Database Enterprise edition license, and I raise questions about FCAC, it will be by any violent means the terms of the assistance contract?

  Hereafter, document as well, but no luck.

  http://docs.Oracle.com/CD/E25290_01/doc.60/e25224/SRhome.htm

  Thanks in advance,

  AbbasDBA

  It depends on the nature of your organisation has subscribed the support contract.

  For example, see the http://www.oracle.com/us/support/library/057419.pdf 'Incident Server Support Package' (page 13)

  Most customers would sign up for normal support that does not limit the number of SRs, but some they choose this method for specific projects / implementations.

  Hemant K Collette

• Is there a maximum limit for Question pools in the Adobe Captivate 8 SCORM project?

  You want to know if it is necessary to create SCORM content with question pools 27 120 issues all together. Does anyone have idea if there is any limitation in SCORM 1.2 or Captivate?

  I didn't know all the data to indicate the Captivate imposes a limit on the number of pools or the number of questions.  However, SCORM 1.2 has a relatively small allocation of data from resumes and this can sometimes cause problems with big quiz.  But the usual problem that cause relates to bookmarking of the course if the learner should end their attempt to session before completing the module and then later resumed where they had left him.