MCSA-Server 2008 certification

Similar Questions

• How to install the ssl certificate in windows server 2008?

  Hello

  Can someone give me the steps to install the SSL certificate on my application hosted on windows server 2008 R2?

  Hello

  Although technet.microsoft.com should be the best forum for the problems of server below is a guide on how to install an SSL certificate.

  It will be useful.

  To install your newly acquired in IIS 7 SSL certificate, first copy the file somewhere on the server and then follow these instructions:

  1. Click on the start menu, go to administrativetools and click on Manager of Services Internet (IIS).
  2. Click the server name in the links on the left column. Double-click server certificates.

     

  3. In the Actions column to the right, click Complète Certificate Request...

     

  4. Click on the button with the three points, and then select the server certificate that you received from the certificate authority. If the certificate does not have a .cer file extension, select this option to display all types. Enter a friendly name that you can keep track of certificate on this server. Click OK.

     

  5. If successful, you will see your newly installed in the list certificate. If you receive an error indicating that the request or the private key is not found, make sure that you use the correct certificate and you install it on the same server that you generated the CSR on. If you are sure these two things, you just create a new certificate and reissue or replace the certificate. If you have problems with this, contact your certification authority.

     

  Bind the certificate to a Web site

  1. In the column of links on the left, expand the sites folder, and click the Web site that you want to bind the certificate to click links... in the right column.

     

  2. Click the Add... button.

     

  3. Change the Type to https , and then select the SSL certificate that you just installed. Click OK.

     

  4. You will now see the listed link for port 443. Click close.

     

  Install all the intermediate certificates

  Most of the SSL providers issue certificates of server out of an intermediate certificate so you will need to install the intermediate certificate on the server as well or your visitors will receive a certificate error not approved. You can install each intermediate certificate (sometimes there are more than one) by following these instructions:

  1. Download the intermediate certificate in a folder on the server.
  2. Double-click the certificate to open the certificate information.
  3. At the bottom of the general tab, click the install Certificate button to start the Certificate Import Wizard. Click Next.

     

  4. Select place all certificates in the following store , and then click Browse.

     

  5. Select the Show physical stores checkbox, then expand the Intermediate certificate authorities folder, select the below folder on the Local computer . Click OK. Click Next, and then click Finish to complete the installation of the intermediate certificate.

     

  You may need to restart IIS so that it starts the new certificate to give. You can verify that the certificate is installed correctly by visiting the site in your web browser using https rather than http.

  Links

  • Move or copy an SSL certificate on a Windows Server to another Windows Server
  • How to disable SSL 2.0 in IIS 7
  • How to configure the SSL in IIS 7.0
  • Video tutorials to install an SSL certificate in IIS 7 to NetoMeter

  Kind regards

  Joel

• Drivers for Windows Server 2008 R2

  PE1950, 2950 and MD3000i MPIO on Windows Server 2008 R2

  We're trying to nail a few dates to migrate our W2K8 R2 platform and plan the project.  We have most of our technical plans in place, and we have the code.  We have no Dell drivers however and there are several suspicious communications from Dell on this topic...

  Case #1: http://en.community.dell.com/blogs/insideit/archive/2009/08/10/ready-for-the-transition-dell-provides-support-for-windows-server-2008-r2.aspx

  Note:

  • Our engineers have missed on countless piano recitals, songs and episodes of American Idol while spending thousands of hours of testing and validation to make sure that dy products Dell running Windows Server 2008 R2 are the business-rea.
  • We have pilot complete support for Windows Server 2008 R2 for Dell hardware so you can deploy, run and manage easily. You can go here to download the drivers.

  If you view the service labels in our support of similar product groups, you will find an R2 option for servers... but the only public services on the PowerVault MD3000i you don't find any reference to R2 at all.

  Case #2: http://www.delltechcenter.com/page/Supportted+Dell+PowerEdge+Systems+for+Microsoft+Windows+Server+2008+R2+Beta

  This is a list of Beta for PE obviously compatible servers, however it would make sense If Microsoft has included natively the right drivers for the Dell hardware in the distribution of Microsoft R2 RTM so, just can't find any supporting documentation and do not know if the network drivers are compatible with MD3000i.

  #3: There are a few hacks to get drivers Windows 2008 MPIO inherited working with the RC R2 & MD3000i on this forum, but no reference to R2 in the MD3000i matrix and nothing on the site... it's why, we have wondering again where are the good drivers for R2 RTM?

  Can you be it someone from Dell and or this forum please send information on these issues?

  #1: driver compatibility of matrix for Windows Server 2008 R2 running on PE1950 and connected to an MD3000i PE2950 is a supported configuration?  (Code R2 RTM was released to Microsoft volume license customers)

  #2: the network drivers for the host machines included in the support of Windows Server 2008 R2 RTM?  If this is true, are the drivers MPIO for MD3000i and iSCSI Dell other platforms included in the support of Windows Server 2008 R2 RTM as well then?

  #3: If all the answers are not questions #1 and #2... could someone PLEASE contact people of pilot certification on Dell to see if they are same in QA at this point, if they plan to update and display an estimated date of implementation?  We have contacted tech support, but received very vague answers on anything with R2 at this stage.  There is a business directory and a path to escelation for support tickets, but the midrange as this makes it much easier to share information for the masses, we just have not yet found.

  Thanks for your information, comments and your support!

  OptimalState

  I was finally sent to someone who could give me some information on this within Dell, here's what they said:

  PE 1950/2950 drivers:

  The pilot should be included natively in Windows Server 2008 R2 media, and if so, would these drivers would be supported by Dell in a production scenario.

  MD3000i:

  I know that we will not issue a new MDSM which will fund 2008 R2 until sometimes in October. The MD3000i requires MPIO to the MD3000i and Dell drivers driver installation to work properly. I'll see if there is other information that I can find. I understand your frustration and engineer told me that this has been corrected in the next MDSM and MD3000i firmware version in October.

  So, it looks like October before MD3000i will be supported.

  OptimalState

• Cisco TelePresence Manager version 1.7 does support Windows Small Business Server 2008?

  Hello

  Is Microsoft Windows Small Business Server 2008 supported the Protocol LDAP, AD and MS Exchange server for Cisco TelePresence Manager version 1.7?

  Thank you

  AA

  Hello Ahmed - although this configuration "can work", Windows 2008 Small Business Server is not on the support list. This means that it has not been tested and it certifies to work with telepresence.

  To my knowledge, he's not on the roadmap for the future support however, I search and repost as soon as I have an answer for you.

  Kind regards

  -Andrew

  Sent by Cisco Support technique iPhone App

• Oracle 10.1.0.4 on Windows Server 2008 64 bit Standard

  Hello
  
  For purposes of migratiion, we would need to install Oracle 10.1.4.0 on a Windows Server 2008 64 bit Standard and then update to 11 g.
  We forced installation Oracle 10.2.0.4 on a Windows Server 2008 64-bit Standard, but we are not safe for 10.1.0.4.
  
  Given that we do not have this version of the software to try it and we are looking for it, is it possible to install Oracle 10.1.4.0 on a Windows Server 2008 64 bit Standard?
  
  Could you point me to a document referring to Oracle versions compatibility with Windows Server 2008?
  
  Thank you

  At MOS, click the Certificates tab, and then enter the database in the first menu drop-down and select the RDBMS. Then enter the relevant information in other blocks, and then you will see the database Oracle 10.1.0.4.0 is not certified for Microsoft Windows x 64 (64-bit) 2008 R2

  Certification is a little stricter than the support, but extended support ended in January.      REMINDER: First Support for Oracle Database 10.1 ends January 2009 [761713.1 ID]

  There is always a lifetime support, but your case shows how useful that can be.

• OWB 11 g Release 2 (11.2.0.1.0) for 64-bit Windows Server 2008 available?

  Hi team,
  
  We have a windows machine *(Windows 2008 Server 64 Bit) * set for OWB development and where we have installed 11 g R2 Oracle Client. Now, we would like to install (Oracle Warehouse Builder) OWB 11g R2 (11.2.0.1.0) compatible for Windows Server 2008 (64-bit). But when I checked the OTN site, I only managed to find support for 32-bit Windows OWB 11g.
  
  Can anyone suggest if OWB 11 GR 2 is able to support * 64-Bit Windows Server 2008 *?
  
  I don't know if this is the right place within the Forum to post this question, so please direct me to the Group of concern (OWB).
  
  Appreciate your support. Thanks in advance.

  You should check the installation guide and the release notes for more information. You can also turn to MOS, if you have access to support, for the certification of product/platform.

  I think that OWB discussions live here: {forum: id = 57}

  Published by: orafad on May 17, 2011 12:07

• 11 GR 1 material OBIEE and Windows Server 2008

  Hello
  I tried to decipher certification matrices but came short and thought I would ask here.
  OBIEE 11 GR 1 material is certified to run on Windows Server 2008 64-bit? That is to say if it will support Oracle?
  
  
  See you soon,.
  J
  
  
  Easy points: P

  Hi kremer,.

  OBIEE 11 GR 1 material is certified to run on Windows Server 2008 64-bit? That is to say if it will support Oracle?

  OBIEE 11 g is supported on Windows server 2008 64-bit, but component RCU is only supported on 32-bit windows and 32-bit should be downloaded from the oracle site.

  (2) IE 7 supports only with OBIEE 11 g, the suggestion is go with MOZILLA 3 or higher.

  This has answered your question.

  See you soon,.
  KK

• What is advised, EM install on Server 2008 R2 or 2003 R2 32-bit W

  Hello
  What is advised in of Villa, Enterprice Manager 11 g to install on Windows Server 2008 R2(32-Bit) or R1(32-Bit) in Windows Server 2008, or Windows Server 2003 R2 (32-bit)? I would use a distributor of bone. In which cases above described, I will have less problems with instalation?
  
  Kind regards.

  You should check:

  * Auditor's Certification oracle Enterprise Manager Grid Control [ID 412431.1] *.
  https://support.Oracle.com/CSP/UI/Flash.HTML#tab=dashboard (= Dashboard page & id = gdk5rmsm ()), (page = KBNavigator & id = gdk5sgew(viewingMode=1143&from=favorites&))

  for combinations certified OEM GC and Windows

  Another thing that you should know is:

  Virtualized environment certification
  For more details on political support on VMware Oracle, please see the Note [249212.1 |]
  Oracle Enterprise Manager is not certified with other configurations of virtual machine (other than the Oracle VM) at the moment. This includes solutions Xen, Virtuozzo or Microsoft VM.

  Concerning
  Rob

  http://oemgc.WordPress.com

• OBIEE 10.1.3.4.0 is compatible with MS SQL Server 2008?

  Hi all
  
  We are currently working on version 10.1.3.4.0 OBIEE and need to connect to MS SQL Server 2008 to perform the modeling process.
  
  So my question is who is compatible with the 10.13.4.0 OBIEE MS SQL Server 2008? Is this fine if go us forward with modeling?
  
  Please answer as soon as POSSIBLE, because it is very critical for us. and if any document would be very useful
  
  Kind regards
  Pierre Collin

  Hi David,

  You can find the OBIEE documentation here: http://download.oracle.com/docs/cd/E10415_01/doc/nav/portal_booklist.htm

  Compatibility is given the [system requirements and supported platforms | http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e10417.pdf] doc

  Certification for SQL Server 2008 came with 10.1.3.4.1, you can have problems with 10.1.3.4.0

• Pavilion c 500-467: windows server 2008 display driver

  I am running Windows Server 2008R2 64 bit on a pavilion with a HP2509m monitor 500-467c. Which shows the driver works with this combination of material? I see Windows 7, 8 and 10 64-bit on the driver list, but not Windows Server 2008.  Help please!

  Hello:

  You want to try the W7 64 bit drivers for 2008 Server R2.

  Try to install the drivers manually if automatic installation method does not work.

• Definitions for Windows Server 2008

  Hello!
  I was looking for definitions of toshiba for windows server 2008, and then I realized that there are no definitions for windows server 2008.

  So if someone knows how to fix this please let me know.

  You are right. Support Toshiba doesn t Windows Server 2008 and as a result you will not be able to find any Toshiba statement associated with this OS.

• HP 280mt g1: g1 280mt hp does support Server 2008 r2?

  Ladies and gentlemen?

  I need your urgent help. I loaded the Server 2008 r2 on hp 280mt g1, it loaded quite ok but ethernet drivers can not be found. I tried to download but to no avail. What could be the problem?

  Boris

  Hi, Boris:

  Try the driver for ethernet controller for Windows Server 2008 R2 directly from Realtek gigabit.

  a 2nd on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

• Compaq Presario CQ1 1000: network drivers for Compaq Presario CQ1-1020 all-in-One desktop PC running Windows Server 2008

  Hello. I am trying to create an area of origin. I know I have to use more computers in the domain, but this is not the point. I was wondering if someone could help me find a driver for Server 2008 network for my computer (or someone could build one but I heard that takes a lot of effort). The original network driver has become unknown when I installed the operating system. I am also aware that I should use a newer computer for this but I can't afford to buy one now and I can't seem too creating a on a virtual machine. Also, I searched all over the internet and there are drivers for my computer, but not for the operating system I. Any help would be greatly appreciated. Thank you!
  
  P.S - computer is in the subject if you have not already guessed.

  Hello:

  It is possible that the file have not checked out pilots in their folder.

  To do this and then try to manually install the driver.

  Download and install this free utility for files.

  1 file listed is for 32 bit.

  http://www.7-zip.org/

  After you download and install 7 - zip, download and register but do not sp46403 run.

  Right-click on sp46403 and select 7 - Zip from the list of items.

  Have 7-Zip extract of: and leave it to decompress the file in the sp46403 folder.

  Then try to manually install the drivers, but navigate to location 7-zip extracts the sp46403 driver file to.

• Portege R600 - cannot update the BIOS using Win server 2008

  Hi all.

  Pls help...

  I tried to update my bios to the new version, but I can't.

  I just downloaded bios update of the toshiba site for portage r600 for my model number (bios update 1.80 - winner), I unzip the zip, run the exe, but error popup came:

  Package for the TOSHIBA BIOS ver.3.2.9
  Unsupported product type is installed.
  Package BIOS BIOS Version: Ver.1.80
  Current BIOS version: Ver.1.40

  So my question is what am I doing wrong? I'm trying to update my bios from windows.

  is my version of windows: windows server 2008 Enterprise Edition x 64 SP1 (don't ask why, I just have to run Server 2008)

  Thank you.

  Hello

  Your OS windows seems not to be the Windows which was preinstalled on your Portege
  You cannot update the BIOS by using the windows server 2008 Enterprise Edition x 64

  You will need to put the system which has been pre-installed by Toshiba

  Good bye

• HP Pavilion 15-E007TU Windows 7 and Server 2008 windows - drivers please

  Hi team,

  Could you please help me about windows 7 and windows server 2008 drivers for the HP Pavilion 15-E007TU.

  Kind regards

  Sri.

  Hello:

  You can use the W7 64 bit drivers for the 4540 s of HP Probook except audio and card reader drivers.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdHome/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4059%257CswLang%253D%257Caction%253DlistDriver & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Audio:

  Accept the agreement, download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  This model card reader driver should also work on your.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5405424 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125075_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken