Meaning of lines hostCPUID, userCPUID, and guestCPUID in the vmware.log file

Similar Questions

• Collect the Thread Dump using Script and live in the separate log file

  Legends of dear,
  
  I ask you to provide me with a few lines of useful guide to collect the Thread Dump using script on linux and redirect the output to a separate log file, but not the STDOUT file. If it is redirect to STDOUT then how to extract only the thread stack to a separate log file.
  
  I used
  ps - ef | grep java
  kill - 3 < pid > > > ss1_td.log
  
  but it does not provide the thread stack to the log file.
  
  Any aid operation would be appreciated a lot.
  
  Kind regards
  Knockaert

  Karthik,

  Please see this link below

  http://www.industryvertical.co.in/2013/01/script-thread-dump-of-multiple-servers.html

  site of my friend where we placed a hands-on experience.

  Mark this if useful for you

  Kind regards

  Bouchra Arun.

• Is it possible to define the name of the path and inside the MSI log file

  Is it possible to define the name of the path and inside the MSI log file, so that it should not be set from the command line.  This way just race the msi causes always a logfile in a specific path and the file name?

  Read the following article and see if it helps.  In my view, it is possible to use InstallShield, but I'm not sure.  It's just a little out of my League. http://www.flexerasoftware.com/webdocuments/PDF/msi_writing_to_the_log_file.pdf.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to extract the same song, several times using different bit rates or formats and store all the digital music files in WMP 12 default on the same HDD music library

  Using Windows Media Player 12 (w/under Windows 7), "can I ripping the same song, several times, using different bitrates & and/or formats and store all the digital music files in the music library by default WMP - 12, on the same hard drive?

  1.) #1 goal: tear up the same song repeatedly, w / "different rates" as a WMA file.

  2.) #2 goal: tear up the same song repeatedly, w / "different rates" as an mp3 file.

  3.) #3 objective: NOT to each subsequent copy (version) of the song, deleted & and/or replaced by the previous version of the song [even].

  4.) question Bottom Line Up Front--> is Windows Media Player 12 (included with the Windows 7 operating system) are able to achieve '#1 objectives; #2; & #3 above?

  5.) details/example: I want to tear the piece "Maria Maria by Carlos Santana" to my laptop as a Windows Media Audio [WMA] file.  In addition, I would like to rip the song 'Maria Maria' three several times with 3 different bitrates in format WMA; and, as an MP3 file.  Therefore, my final result wished (after the extraction process), will take place the four 4 audio files split up as follows: (a) 'Maria Maria by Carlos Santana'--> Format: file WMA; Ripped @128 Kbps bitrate.  (b) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped to the "Variable bit rate; (c) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped commissioning "Lossless." and (d). 'Maria Maria by Carlos Santana'--> Format: MP3 file. Ripped @256 Kbps bitrate.

  6.) my preference: I do NOT want to rename the file (s). {for example, 'Maria Maria by Carlos Santana' renamed/changed for--> "Maria_Maria_by_Carlos_Santana_128kbps.wma",...} 'Maria_Maria_by_Carlos_Santana_256kbps.mp3 '; etc.}.  In addition, I am not concerned about the additional disk space that will be consumed after multiple copies of the same song with different speeds of transmission and different formats.

  7.) my experience w / Windows Media Player 10 (w / the operating system of Windows XP): using WMP - 10, my goal (s) described above is not a problem at all.  Simply insert the CD purchased by Carlos Santana, containing the song "Maria Maria"... Select the desired Format (WMA; WMA VBR; WMA Lossless; or mp3)... Select the desired flow rate (WMA... 128/160/192kbps_mp3: 128/192/256/320 kbit / s; etc.) ; and click on the "RIP" button to start the copy process on the hard disk of of Carlos Santana's "Maria Maria".  This process (w / WMP-10) would result in having the same song, copied on the hard disk, with levels of quality different "audio" (via the different bit rate settings); regardless of the format (MP3/WMA) which was chosen.

  8.) my experience w / Windows Media Player 11 (w / the operating system of Windows XP): using WMP 11, to described above of my objective (s) could not be reached e-a-s-i-l-y.  The problem with WMP - 11 - in short - which was after the desired selection "Rip settings" tab 'Options' of WMP - 11 (i.e., Format & Bit Rate) and heart-wrenching piece wanted to {'Maria Maria by Carlos Santana'} a moment later/second, WMP11 remove / would crush the previous version of the song [even].  Therefore, the program would NOT allow the user to have multiple copies of the same song on the hard drive of the PC; which obviously restricts a user to have the freedom to choose what level of quality digital audio, they prefer to listen to.

  9.) the ability to have multiple copies [at my descretion] of the same song (on my hard drive) with different bitrates and formats in my music library, is important for me because it has a direct impact on "how I enjoy MY music ', and in what form (audio quality), I choose to listen to my music.  {For example, when I exercise and listening to my camera, digital audio player (Zune), a song ('Maria Maria by Carlos Santana'), will usually be torn off at a lower rate due to the unit of capacity reduction of storage - compared to the storage capacity of notebook PCs/desktop/external hard drives PC.}  However, when I listen to my music through my home cinema or entertainment system (which contains a hard disk dedicated with a large storage capacity), I prefer to load the entertainment system with digital music files that have been ripped to WMA... with the bit being rate-setting is for the: settings "WMA Variable Bit Rate" or "WMA Lossless.

  10.) there you have it.  This is my first post in this forum.  I hope that [detailed] explanations, will be sufficient to encourage these "with knowledge & the hands on experience" using Windows Media Player 12 (as well as with WMP-10/WMP-11 respectively), by providing a [step] "How-to"... "solution to my situation.  It would be highly appreciated.  I'm looking forward-'the solution' - and relevant suggestions & and/or community feedback regarding my request for assistance.

  * Thank 'All' (that would) in advance... For your time & Assistance *.

  Certainly, you can, but I would say that they be in different folders, for your convenience as well as Windows.  You can create one for each debit/format, then you will know who is who.

  In Windows Media Player, on the toolbar, select Tools, Options, Rip, and then select the flow you want first, rip music, then change the folder (higher on the same tab) and rip again... and so on and so forth.

  When you are at home on your home theater, you can use the 320 bitrate folder, when you transfer to the Zune, you can use one of the lower bitrate files (although I personally tear it up to 320 and let the Zune reduce as he wants, even with the iPhone via iTunes, hard drive space is not really a problem here) my server has several hard drives, and I can always add more if and when space is low!

• If I have windows 7 64 bit and I delete the folder program files (x 86) from my hard drive

  If I have windows 7 64 bit and I delete the folder program files (x 86) from my hard drive

  On Fri, September 14, 2012 03:06:02 + 0000, MerrellWilson wrote:

  It's 74GB and I used 73 GB

  Two points:

  1. If you want to delete some installed programs, do not make
  deletion of the folder they are in. That doesn't remove them only partially and
  can cause problems. Remove programs by in control
  Configuration/program Panel and features.

  2. a drive of 74 GB is a tiny disk these days. There are a number of
  things you can do to save space, but they are all basically
  temporary and you will soon find yourself in the same situation.
  The only real solution is to buy and install a larger capacity drive.
  Fortunately, they are very cheap these days; You can buy a 500GB
  drive for about US $65.

  Ken Blake, Microsoft MVP

• How can I fix lines horizontal randomly and glitter for the LCD screens for HP Pavilion dv5 Vista?

  How can I correct random lines horizontal and glitter for the LCD screens for windows vista HP Pavilion dv5? Only, it happens randomly and can get all a few minutes at a time every few hours. The entire screen white and black and horizontal lines will appear during the flickering on the half top of the screen only. Nothing else changes. My sound is immutable, and none of my screens change the size or location. However, they may appear up and down during the flashing. Can someone give me an idea of what is wrong? I looked on Google for possible corrections, but most of them seem to be for refresh rate and I don't have a notch for this and can't change it according to the steps they offer.

  Read my initial response on what it takes to please.

  "See if this helps you:

  These lines indicate corruption graphics driver or lack of graphic material.

  Go to the HP Web site > Search a drivers and download article > search your laptop model number > your operating system > drivers for it: either video / graphic / Chipset (according to the wording it) > download and install the drivers.

  http://WWW8.HP.com/us/en/support-drivers.html

  If that fixed it, it seems to me be a problem of graphic material.

  Because it's a laptop; If under warranty, contact HP.

  If is not under warranty, contact a repair shop, local. »

  See you soon.

• xw8400: 8.1 is win the end of the line for xw8400 and others in the series?

  I don't see much posted on upgrade to 8.1 win to win 10 to the xw6400 xw8400 etc.

  8.1 Win is working great for me, but I don't like to win 8.1 and would spend to win 10.

  Someone at - it ideas?

  If you did could you please put the model and other important details such as RAID, etc.

  My system is pretty vinilla. No DSS, no RAID, optical and GPU readers supplied with the box.

  I had 10 Professional 64-bit Windows and running on these xw workstations for months now, starting by the W10 preview release, and then at the end of July with the RTM version and all recently with the large W10 November update.  W10 works very well on these workstations and is very fast.  I'm usually running 8 GB of RAM, but some have 16GB.  I only use SSDS and generally SATA II types of Intel versions.  I upgrade to the fastest processors, both of them and for example use usually two SLAEJ sSpec code quad cores in the xw6400.  I use two of the code core E5450 quad sSpec SLBBM in the xw6600.

  I posted here on what I'm doing 'activate Windows 10' a workstation.  Clonezilla or Acronis is what I use and I have clone W7Pro64 or W8.1Pro64 on a SSD 'stunt' work, then do the upgrade of the downloadable installer MS. W10... I run the .exe rather than boot from the thumb drive and choose to save nothing.  Once a job is activated it will be activated for ever, and I can do a fresh install of W10 on this later when I have free time.  It is my understanding that harvests of activation process of MS W10 the UUID of the BIOS string and thereafter you are registered for this type of W10 install in the servers of activation for the long-term.  This makes the cloning an installation image W10 to a xw6400 above another work of xw6400 active fine... If both are W10 is transparent.

  Regarding the drivers... MS did the drivers that are compatible W10 integrated into Setup (which automatically interacts with MS central servers, and which MS has updated according to comments from the owners of these workstations on doing just that and does not work.  It's a great advantage to have a HP workstation... MS is willing to invest the time and effort to do things for HP.

  For W7 and W8 there is universal installers HP that I receive from the Z620, etc... HP RealTek, Broadcom card PCIe USB3 TI and install them properly on xw6400/xw8400 pilot sites.  They are able to install drivers for the motherboard chips that predate the machine, they are offered for because the previous chip drivers are included in the program installation (but not necessarily with HP).  For example, the Z620 had a Broadcom NIC in option and you can find the HP Broadcom universal installation program which interacts with the motherboard the xw6400 Broadcom chip also perfectly to get the modern drivers loaded.

  I don't go to the former site of HP driver for these old jobs, who stopped to be updated for years.  I use the latest version of the BIOS, of course.  I now only use SSD... usually Intel 320 series 300 GB or 160 GB SATA II those off eBay, used.  I use firmware update and software Intel Toolbox to optimize these.  I'm only using nVidia Quadro... now generally FX1800, FX3700, Quadro 2000 and 2000 d cards.  The FX580 gives a lot of bang for the buck also, and they are all off eBay.  The idea was faster more reliable performance at a reasonable cost, with parts of HP.

  Many details to absorb, but things are working fine, stable and fast.  I have personally loaded W10Pro64 on several xw6400, xw8400, xw6600 and Z620 workstations.  All good and I need to do for the benefit of the long reach of our group, but I like W7Pro64 the best yet.  However, I am surprised how well W10 done at this stage.

• Download Manager: is is possible to cancel a download and not delete the partially downloaded file?

  There seems to be no way to change the default behavior for the Cancel button the Download Manager.

  I would like to be able to break a download link without losing what I have downloaded so far.

  At the moment to achieve, I stop the download, move the files, and then cancel the download. It of messy and got to make mistakes in the past.

  Thanks for your suggestions.

  You have changed the investigation once more.

  • "If you state categorically that Firefox will remove always download files when you press the Cancel button, I will mark this topic resolved."

  That seems unlikely,
  and in a certain extent depend on system set-up, and for example if you download to a temporary directory, regardless of what Firefox does or not doing the files will be probably deleted a date closer.

  The above is another question, but again, you have asked initially

  • "I would like to be able to break a download link without losing what I have downloaded so far."

  Sometimes, it is possible.

• The DNG format conversion and loss of the original RAW file?

  I was guided to implement my structure of import so that Lightroom would take my Canon. Cr2 files and convert them to DNG on import. Now, I find that for a major competition, they want to see the RAW file origin but while in the preferences panel, I've had 'data fast loading Embed' checked, I had not checked the box for "Embed original RAW file. Thus, it is impossible for me to produce the original RAW file now?

  If I check the box to embed original raw file, what are the implications for the sizes of files and disk space?

  99jon wrote:

  After you click Import there are choices in the upper part of the import dialog box. If your photos are imported from the camera or camera card select copy. If the CR2 files are already in a folder on your computer, choose Add. LR will bring in the original CR2 files and create a XMP sidecar for each of them.

  Create a XMP file does not by default. You need to tell Lightroom to do by turning on an option or by using a command. Some people never use the XMP sidecar files.

• I bought 5 Fusion pro and cannot get the VMware Tools to install

  Bought a new iMac and bought Fusion 5 Pro.  I have a 5 year old and reclassified iMac Fusion 4-5 fusion and had no problems.  The new computer is for my wife and I tried and tried to migrate the laptop and it failed every time.  So, I did a clean install of Windows 7 and before I downloaded everything that I installed VMWare Tools.  For the past 2 days, I was passage of the files from the laptop and install programs that she had on the laptop.  Problems with Word and excel as they sit a spin.  Money went to re - install VMware Tools and it launches the installation program and then comes up with an error message... Error 1606: Could Not Access Network Location \\<host>\users\administrator\my documents

  Went into Windows to uninstall VMware tools and he started the uninstall program then stopped and got the same message.  I can not uninstall tools and cannot re - install the tools.  I need help to solve this problem.  I'm a guy of plug-and-play and if there is code to do, in my opinion, I'm sunk.

  Anyone have any ideas on how to solve this problem, so I can get up and go?

  Extra solution after Woodys - please check if mirror folder is enabled or not, if it is enabled, please disable it then try to reinstall the tools.

• When I import TIF and JPG with the same metadata files, only the TIF files are imported. How can I change this?

  I imported and renamed TIF and JPG files with the same metadata about the date and time of the recording. Only TIF files are imported, the JPG files remain unimproved. So I in 13 Finder e. g. image files in the same folder where Lightroom is only 10 files. Ideas for the resolution of welcome!

  Thank you

  Disable the option Preferences > General > process files Next To Raw files as separate Photos JPEG.  Then again an import.  It appears that, in this case, LR consider a TIFF image to a file "gross".

• How to see the lines of my adpater code SOP in my log files

  Hello
  I'm not able to see my SOP lines in the log files when my adapter is running. Its strange but it's true. I changed the log.properties file to debug for adapters.
  What I have to deal with any other configuration change?
  Please suggest.
  
  Thank you
  Kalpana.

  Name your Java Code?

  with the superior version of the jdk

  If this most recent version is supported with IOM, then no problem at all. Have you tried with the restart of the server?

• Line tool misaligned and cannot resolve the race (.dxf exported from sketchup)

  I've been using illustrator for this purpose for many years still today when I try to draw lines to complete the .dxf exported from sketchup lines lines and to her are still perhaps 1/8 ". Also, I can't set the race of 1 PT. LMK if someone had this problem and if you do not see the file I'm working on I have the link below.

  Thank you

  Gro FloorPlanBase 4.28.ai - Google Drive

  OK had to use turn off my dark cookie and use google chrome to get your file.

  So you can see that some parameters are set to align on the pixel grid, and after the name in your window you have RGB.

  

  1. Click on the dashboard to align to grid of stack and change the empty box
  2. File > Documents color Mode > CMYK
  3. Transform flyout, unchecked align new elements to the network stack

  

  This can happen when you make a new document and web document profiles has been used, or some gave you the file in this way. In the screenshot below you want to watch for change RGB to CMYK and snap to grid of uncontrolled battery

  

• Everyone recognizes these red lines (which appear and disappear on the passage of the mouse sometimes)? Photoshop has also been blocked a lot after.

  

  It was "directly related to your video card.

  The card is supported, but you need to get the latest Nvidia drivers

  Adobe Photoshop CC GPU (graphics processing unit) and card FAQ video

  Current video driver is:

  Version:	353.62 WHQL
  Release date:	2015.7.29
  Operating system:	Windows 7 64 - bit, Windows 8.1 64-bit, 64-bit, Windows Vista 64-bit Windows 8
  Language:	English (United States)
  File size:	278.91 MB

• DVD player - watch my DVD-R disc data but all files disappeared and I get the message ' Drag files in folder to add To Disc ' at the opening of the DVD

  Yesterday, I used my laptop Toshiba Satellite update of data on an excel spreadsheet on my dvd - r disc, which is half full of files such as spreadsheets, assorted images and backup files.  Today, when I insert the disk into the pc it still shows 2.43 free 4.37 GB has been the norm, which means that it contains these files.  But when I open the drive there is nothing else that a message "drag files in this folder to add To Disc".  I don't know what happened.  I had just copied various basis files that I mentioned on this drive months ago without any problems.  I've updated excel spreadsheet monthly with no problem.  I checked the other drives I have and they are very good.  Any help would be appreciated.

  Hi Mark,

  Thank you for your update on the issue.

  Glad to know you've got the problem solved. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows. We will be more than happy to help you again.

  Thanks again for sharing with us!