Measure a sum of the widths of elements in an array?

Similar Questions

• Adding the n last elements of an array

  I collect data from an instrument once per minute and add each value in a table. After many days, there are a large number of values in the table. I want to be able to select a duration, that is 4 hours and the last 4 hours of values added together, so it can be displayed. Any ideas. Thanks in advance for the help.

  ssmith

  Use the subset of the array and add items to the table.

  Once per minute = 60 values per hour.

  Number of hours * 60 = number of items you want.

  So subtract number of items in the table size to get your index.

  Quick and easy!

  8-)

  

• Problem with the sum of the elements of cluster

  Hello

  I have a problem (maybe very simple to solve). I have a cluster with 3 integers inside. I'm building a table of these elements (after unbundling my cluster) and I want to make the sum of all these parts. However, my result is not satisfactory. For example: my table: [255,255,238] and LV shows me the sum of the parts: 236.

  Probe 6 on my printscreen: my table

  The probe 7: operating result of the sum

  What I am doing wrong? Thanks in advance

  

  Your data type seems to be U8, so the maximum value can not 255. (It's a little hard to read because of the image resizing). Why don't attach you the VI instead?

  If you need the actual amount, you must first convert them to a different representation (for example the U16).

  In addition, what is the purpose of the loop FOR? Since it only works for an iteration, you might as well delete.

• How to measure the width of pulse with MyRIO

  Hello

  Sorry in advance if this is not the most appropriate forum.  I'm not entirely sure if it's a more general problem of 'software' or the MyRIO-specific.  I have searched the forums and found a few related topics but could find no one who help me in this context.

  I'm trying to measure the width of a sensor pulse ultrasonic ping.  It emits a signal conditioning - the time that it is high directly corelates how far is the object.  Being new to LabVIEW I am confused as to how do I calculate the time it remains high.

  I read that LabVIEW should not need to 'variables' as in python or C, for what is the best way to measure time, the signal is high?  Normally, I'd go (new_time - old_time), but obviously I can't store an old time in LabVIEW as I would in python or C.

  Other notes:

  I have the sensor correctly ping echoing and I can see the blips on a chart and see a perfectly square wave valid.

  

  To answer your question on how you would in LabVIEW...

  While LabVIEW has not stated/named variables that you have in a language based on text, the data is stored on the wires. You can use the nodes as node registers or shift of feedback to store values between iterations of a loop:

  (this will keep subtracting y (starting with 0) and store the result for the next time it runs)

  LabVIEW also has functions in the range of mathematics/signal processing to make the detection of pulse on a waveform.

• Reduce the width of the apex element field...

  I can't reduce the width of the apex element field. I used apex_item.text in the region of select query report.
  
  I want to change the field width. I tried to change the width of the element... but no use. pls help how to change.
  
  
  Thanks and respect,
  SKUD.

  The third parameter to apex_item.text is p_size. You can set the width of field with this setting.

  Swear

• Can't align the widths of the two elements in my CSS

  On this page

  pictopoetry.co.uk/Category/Poem/

  You can see there are two things I want to align, but they lack a pixel

  

  
  

  The two rules for the CSS are below.

  
  

  So my question is how do I raise these two elements for row cleanly?

  
  

  Thank you

  
  

  Martin
  

  
  

  div #content h2 {

  -moz-border-radius-topleft : 0.4em ;

  -moz-border-radius-topright : 0.4em ;

  background : URL("images/bkgalphabr30.png") repeat scroll left top transparent ;

  color of the border : money - moz-use-text-color silver ;

  border-style : solid solid no ;

  width of the border : way to 1px 1px ;

  color : #666666 ;

  font size : 1.5em ;

  font : normal ;

  padding : 0 1em 0 0.625em ;

  width : 100% ;

  }
  
  
  div.post div.entry, div.entry div.post-chat - fifteen, div.entry, div.post-chat - three div.entry div.page {

  -moz-border-radius-bottomleft : 0.4em ;

  -moz-border-radius-bottomright : 0.4em ;

  background : URL("images/bkgalphawh85.png") repeat scroll left top transparent ;

  color of the border : -moz-use-text-silver silver ;

  border-right : solid silver 1px ;

  border-style : no solid solid ;

  width of the border : average of 1px 1px ;

  float : left ;

  the bottom margin : 1.25em ;

  padding : 0.75em 0.5em 1.2em ;

  width : 100% ;

  }

  You are at the mercy of the percent sign. By setting the width of .entry as 100%, you lose the fine adjustment possibility which pixels gives you.

  By changing the width of a 609px said (!), I was able to make them answer softly:

  div.post div.entry, div.entry div.post-chat - fifteen, div.entry, div.post-chat - three div.entry div.page {/ * added div.post-chat - 15 * /}

  background: url("images/bkgalphawh85.png") repeat scroll left top transparent;

  border: 1px solid silver;

  -webkit-border-bottom-right-radius: 0.4em;

  -webkit-border-bottom-left-radius: 0.4em;

  -moz-border-radius-bottomright: 0.4em;

  -moz-border-radius-bottomleft: 0.4em;

  border-bottom-right-radius: 0.4em;

  border-bottom-left-radius: 0.4em;

  border-top: none;

  Padding: 0.75em 0.5em 1.2em.

  margin-bottom: 1.25em;

  Width: 609px;

  float: left;

  }

  Beth

• Setting the width and the height of the elements (texts, images), with custom percentages associated with the width of the browser

  Dear Muse-Geeks,

  I'm really pleased with the ability and especially the ease use of Muse. But I couldn't imagine that the width of a text box, image, the box cannot be defined as a percentage of the width of the browser.

  But now after some research on the web I really seems the only option is the 100% browser width.

  I just missed something to set a value in percentage (vertical/horizontal) size?

  Concerning

  André

  Hi Woods

  When you talk about the size of objects as a % of the browser, I think you are talking about the responsiveness of the site. If Yes, then it is not possible to create sensitive sites in Muse at the moment. But yes, you can set the width to 100% for some items and a slide show full-screen only.

  Kind regards

  Aish

• Pass elements according to the width of the browser & full screen video backgrounds

  Hallo,

  Possible how ist create with Adobe Muse, a Web site like this: http://www.bootsprinting.com

  Hi Chris!

  Just to translate the a little bit for others who may read this thread in the future... ;^)

  You can get this result within the Muse by creating a block of text that is 100% browser width (the width of the text block to align the edges left and right of the background of the browser are in drag Muse). Then take the sets of items that you want to have "reformatting" and each set of group. Then cut it, click an insertion point in the 100% width text block and paste. At this point, you have a group that behaves as a single character of text/letter. Repeat for each item you want "reformatting". You can use the text tool to select the entire document in the text frame and focus.

  If you can get a glimpse into the browser and close browser resizing adapt not enough groups that you pasted in the block of text on a single line, they will wrap to two, three, lines etc. and the text block, they'll grow in height, if necessary. You can also use paragraph withdrawals to adjust the width of the browser in which the packaging occurs.

• How do I put elements so that they adjust to the width of the browser

  Hello world

  I'm trying to make items on my site images/graphics adjust to the width of the browser and always be centralized as this site http://pixelblue.ca

  Someone knows how to do this?

  Thank you
  Chris

  http://TV.Adobe.com/watch/Muse-feature-tour/Muse-design-for-flexible-browser-width/

• Measure the width of a HBox

  I add a button to a HBox. The button is of variable length and I want to get the width of the HBox whenever a new button is added.

  1. How can I get the width of the HBox whenever a button is responsible?

  2. How can I add buttons to the HBox while they are placed end-to-end horizontally (i.e. without spaces between the buttons)?

  Thank you!

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML "layout ="absolute"applicationComplete =" init () "> "
  < mx:Script >
  <! [CDATA]
  Import mx.events.ChildExistenceChangedEvent;
  Import mx.controls.Button;
  private var button: CustomButton.
  public void init (): void {}
  for (var j: int = 0; j < 5; j ++) {}
  button = new CustomButton
  buttonsContainer.addEventListener (Event.ADDED, getLength)
  buttonsContainer.addChild (button)
  }
  }
  public void getLength(e:Event):void {}
  trace ("length =" + e.Target.Width)
  }
  []] >
  < / mx:Script >
  < mx:HBox id = "buttonsContainer" horizontalCenter = red '0' = '0' / >
  < / mx:Application >

  CustomButton.mxml

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Button ' http://www.Adobe.com/2006/MXML "creationComplete ="init ()">

  < mx:Script >
  <! [CDATA]
  public void init (): void {}
  This.Width = Math.Floor (Math.random () * 50) + 50
  }
  []] >
  < / mx:Script >
  < / mx:Button >

  Use the following code

  buttonsContainer.addEventListener (ChildExistenceChangedEvent.CHILD_ADD, getLength) in the Application init function that needs UriPattern

  and change your CustomButton.mxml as

  Hope this helps you

  See you soon

  -Vikash

• The width of my page is 960px but when published looks oversized and images are enhanced

  Hello

  It's my first site in muses so forgive my terminology.  I created a site office @ width 960px page.  My page looks fine in preview but then to publish the entire page is oversized.  For example, I have a blank publication at the top of the page with the images of heroes in the target that are defined on the filling and are set to the exact size of the image - 350px x 960px and connector is set to the original size.  But they look pixelated on the site and if I measure the pixels of the screen of the image that they are actually on the screen at the 1152px x 418px, but all of the css settings I can see in my Inspector of the browser (firebug) background image 350px x 960px size watch page and I don't see any obvious reason why watching the other settings around the main element or the width of the page.  I'm puzzled!  the width of my entire page / content area is in 1152 and not 960px.  I looked around different forums and tried various things but I can't work on why I have this problem.  Can anyone help... Please!

  Please press command-zero on Mac or control + zero on Windows in your browser. It seems that the default zoom of your browser is not 100%. Hit command / control + zero be able rely on 100%. If this isn't the question, please, click on publish and create a free temporary version of your Adobe Business Catalyst site and provide the URL so that we can investigate further. Or if the site is already hosted elsewhere, to provide this URL. Thank you.

  Mylenium The min-height of the div on the page has no impact on the scale of the site in the browser.

• How can I incease the width of column in the google search results?

  The search results show all the words and the URL so I want to be able to increase the width of column - I can't see an icon that allows me to do

  The full URL is in the link, and an extension script or a user could replace the short green text (< name > element) with the full link, but I suspect it should be customized wrote, I don't know that you won't find anything in that direction right now.

• How to set the width of the comments Page?

  Every time I open the Pages, Page thumbnails and resizing automatic notes pane. I then drag the sides of the windows to resize them to a much smaller vision. A lot of time. How do we set the width of the pane for the two, so that it will not automatically resize when you open a document? Thank you.

  Pages v5.6.2 opens with miniature signs Gallery and comments to their maximum width. You can put these to scale down, save the document and exit Pages. Reopening of the same document, your previous settings are lost and these elements are maximized again. There is no magical controls that make these permanent adjustments with the same document, in all documents, or by registering as a model.

• Difficult to change the width of talk about thermal discharge in Ultiboard

  I'm trying to change the width of talking thermal relief of various buffers on an existing Ultiboard layout done with an earlier version, and that they do not change. Can I change the "type" for x or +, etc. but not the width of the shelves.  Is there some global setting prevent this? That means "use the polygon settings' when you set the type, and how will this affect the width talking thermal relief? I see nothing in the help file. I also searched help and the user manual for what happens if I select Auto for width, but I can't find any instructions on what it means.

  I was able to confirm the behavior you're seeing where the width of the rays is limited by the width of the measurement of the surface of the coppe / diet plan. It is certainly not intentional and I produced it for R & D to address a defect report. I am very sorry for the inconvenience that was done to you.

  There are no files attached on your post so I can't confirm your actual designs. Please let me know if the workaround solution (to adjust the width of the measure) will allow you to get the results you're looking for, despite the incorrect behavior.

  Jeff

• How to resize the width of the table programmatically?

  Hello

  I have a table with a change number of columns dynamically. Is it possible to set the width of the entire table and change the width of the columns by program? Something like property activates a cell: size: width of the listbox?

  Thanks in advance.

  Errata:

  There is a possible way to change the size of the elements; See this KB for this request.

  hope this helps,

  Norbefrt