Memory dedicated and shared on the W700?

Similar Questions

• PGA in dedicated and shared server mode

  Hey what is the change in the allocation of memory for a database when it is run in dedicated and shared server mode

  Please read http://download.oracle.com/docs/cd/E11882_01/server.112/e16508/memory.htm#CNCPT1243.

• problems with dedicated and shared graphics memory

  So basically I want to run a game that I have all the specs (above actually) that I need to play outside of memory dedicated to the graphics card. But what confuses the life out of me, is that I have about double the necessary memory required in system memory shared which as I understand, it is used on an as-needed-basis. However, clearly this is not the case, as soon as I try and run it crashes immediately.

  Okay, so I have the graphics card with the following specifications:

  chip type: mobile intel (R) 4 series express chipsets
  channel of the card: mobile Intel GMA 4500 M
  total memory: 797 MB
  memory: 64 MB dedicated
  shared system memory: 733 mb

  In addition to what BossDweebe wrote, I would like to comment on your comment

  "I more than double the necessary memory required in system memory shared which as I understand, it is used on an as-needed-basis." However, clearly This is not the case, as soon as I try and run it crashes immediately. »

  Shared memory (part of your system RAM) is provided by Windows on a dynamic basis, it is added if required and with a limited amount by the RAM of the system itself needs to run applications (= your shared graphics memory size can be based on available RAM total). It's a help for some graphical features, but not necessarily a guarantee to run games that explicitly requires a certain base of dedicated RAM video. As the dedicated RAM (own GPU memory) is much faster than the share of the contributions of RAM, two cases can appear:

  (1) the game does not start. Many games check the video hardware before starting, and if they are 64 MB VRAM and require more, often it is game over. The dynamically allocated shared memory cannot be controlled and is of no interest here.

  (2) other games may be more forgiving. But you're going to be faced with a vicious circle: you're hoping using shared memory, is a clear indicator of a graphic solution already slow and Asthenique (i.e. an integrated graphics card). Unfortunately, the slow system RAM does not speed up your graphics card, and taking a part of the RAM for the graphics features: with a slower running your game and can still finish in the dysfunctions.

• memory error. and suggestion for the purchase of new system

  Masters of Hai,

  I'm using a core 2 duo processor system intel centrino, with 4 GB ram 60 GB HDD system and 250 GB extrnal USB hard drive.

  If I run video conversion programs, it starts normally. But when you start adding videos in the Middle, adding video files, it says memory. My system is 32-bit type.

  I am a professional video grapher. Also, I plan to purchase the new system win 7 64 bit system. For the use of related works such as conversation, dvd video and audio creation (professionally) and audio, dubbing programs etc...

  For this type of works, what is the minimum recommended configuration. Should be quickly in the work process, with getting them blocked.

  Hello

  1. may I know which application do you use to convert videos?

  2. where the converted file be saved?

  Please check if you are facing the same question when working in mode safe mode with networking.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
  c. using the arrow keys, select Safe mode with networking option.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows Vista with networking.
  e. when Windows starts, check if the network card is listed. (Use an ethernet connection in SafeMode with networking)

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  (Note: when the diagnosis is complete do not forget to reset the computer to a normal startup.) Follow step 7 in the article above).

  Regarding your query, you can check the system configuration required, printed on the back of the cover of software you are trying to install.

  You can also contact the manufacturer for more information.

  Post back with the State of the question.

• To increase the memory in my computer, I just get another memory card and add to the empty slots next to the already existing PC memory?

  I have 1 GB of RAM windows vista. It is rather slow. I would like to as DIY from 1 GB RAM to 4 GB. You just not sure if I would add simply individual 1 GB of memory for places on the motherboard to make 4 GB?

  Hello

  as you have only 1 GB of RAM, you could try readyboost as a less expensive alternative

  Read about the use of a flash drive for performance at the link below

  http://www.bleepingcomputer.com/tutorials/tutorial136.html

  and if you want to increase the RAM on your motherboard, use the crucial scan which you tell what is the compatible type and the size of RAM for your motherboard

  http://www.crucial.com/

• Memory use and class of the custom movie clip?

  Hello

  I need to create instances of a clip 100. Is it better to add functions for these clips in the movie clip class or in a separate category?

  For example, I move(), setPosition(), setRotation() functions, would be that create these features a hundred times and held memory or just reference functions? What could be better?

  Thank you

  There is a slight advantage to create a function to handle all objects of class vs each class having its own class.  but it's such a small benefit that's not worth it to sacrifice any principle of encapsulation, so you should let each Member of the class to use the class methods.

• I get a blue screen telling me to disable bios memory caching and shadowing

  I just loaded xp pro on my computer and I got a blue screen telling me to disable bios memory caching and shadowing. The error reads: * STOP: 0 x 0000000050 (0xFE9B1244, 0x00000000, 0x804FEAC9, 0x00000000

  Hello
  I think that's not the full Errormessage should include a reference to a file, but you have two options:
  1. debugging: http://msdn.microsoft.com/en-us/windows/hardware/gg463009.aspx
  and post the results here, so I can take a look at this.

  2 disable the cache and the cloak: the funtion are in your BIOS, usually under the CMOS settings.

  Kind regards
  Jan

• Qosmio F750 - how to change the graphics memory dedicated to 2 GB...

  In order to get my Qosmio F750 ready to run some games, I've updated all the drivers on via the toshiba Web site and the NVIDIA site also the software downloading. This includes upgrading the BIOS to version 2.00.

  According to the [laptop specifications given on the Toshiba site | http://www.mytoshiba.com.au/products/computers/qosmio/f750/pqf75a-02y00q/specifications].

  I should have the following allocation of memory for the graphics:
  "4095 MB Total: 2048 MB of memory dedicated + 2047 MB shared memory.

  When I check the window Information on the performance and tools, I'm getting shows the following information:

  Graphics
  --------------------------------------------------------------------------------

  Display type card Intel(r) HD Graphics 3000
  Total available graphics memory: 1 696 MB
  Dedicated graphics memory: 64 MB
  Dedicated system memory: 0 MB
  Shared system memory: 1632 MB
  Display adapter driver version: 9.18.13.1422
  The primary monitor resolution: 1366 x 768
  DirectX version: DirectX 10

  Of course, when I look at the specifications of the laptop, I realize that the current graphic memory allocation matches the economy power Mode i.e. allocation of graphics when running on battery

  Normally, it would be nice, however, I don't see any change in the displayed info even when I'm running on current alternative.
  I checked all my power settings, but even when everything is set to "performance mode", the information displayed is the same.
  I try to look in the system bios to change manually the graphical distribution but none this option doesn't exist. Rather all options are defined in performance mode...

  So my final question is, * how can I change memory allocation performance mode graph as it is stated in the specifications of the system? *
  Is this something that happens automatically without changing the displayed Info?
  Is there a driver that I forgot to update? An update of the driver caused cela?
  A BIOS update caused this?

  On a side note, the audit of the DirectX Diagnostic tool, I have the version of directx is displayed as version 11. So I thought that the problem was with the displayed information. But even on the Diagnostic tool gives me the same information.

  I would be very grateful if someone could help me with this.

  Thank you
  Jean-Pierre

  Hello

  This is controlled automatically by the graphics driver.
  If the application that is running would require more RAM (IE game), the graphics card would control this value and I would add some of the memory to the memory of the graphics card.

• Re: How to increase the memory dedicated 32 to 128 on Satellite C850-B906

  How to increase memory dedicated 32 to 128 on Satellite C850-906 on 8 to WIN?

  The word product specifications it can be up to 781 MB shared memory with 2 GB of installed system memory and up to 1 696 MB with 4 GB of memory system, (with a Windows® operating system 7 64 - bit).

  Here is the link of the specifications
  http://www.toshibamea.com/ComputerProduct/4/Satellite_C850-B906/52424?PageID=4

  HELP ME PLEASE

  What you need to do is upgrade RAM. As you can see in the specification, you can improve up to 16 GB. It is about.

  You can buy an additional module more than 4 GB or 2 x 4 GB / 2 x 8 GB.

• How to increase the video memory dedicated Satellite C660?

  I want to increase the video memory dedicated 64 MB to 700 MB for the model Satellite C660

  I do not know what model you have exactly and can't see the exact specification for laptop, but usually with more RAM more than memory will be used for graphical operations.

• Tecra M4 includes memory shared for the GPU

  Hello

  I saw a great offer for Tecra M4 tablets. The only thing is that the GPU has only 64 MB of RAM. But I don't want to run the Advanced (or premium) version of Vista, including Aero.

  So, my question is, the series M4 includes memory shared to the GPU? If this is the case, then I can increaes the RAM from 512 MB base at least a 1 GB and the GPU can use part of it and therefore to run Aero.

  Also, I suspect that the versions of M4 offer have sub-6600 NVIDIA GPU, they would still allow use of Aero, assuming that the shared memory is possible?

  Thank you

  Hello

  AFAIK the graphics cards on computers notebooks Tecra M4 is not shared memory and you can't change the video RAM.

• Variables shared on the CFP becomes zero and communicate with the PSC

  I use a PC with two network cards, one on one wired ethernet, the other on a private IP directly connected to a PSC-2120 (running 6.0.5 full). I use variables shared on the CFP and aliasing to static variable on the PC (initially LV 8.6, now 2009f2 with the same problem in both). PC variables are stored in a database of the Citadel. I have the CFP program built to run at startup, and it works fine when not connected to the PC.

  When connected to the computer all variables shared on the CFP will from time to time (almost 1/min for a few seconds) and randomly becomes zero. Even if they are resized only not to allow to become zero. I can say that what is happening because I use the variables shared as relay alarm thresholds module, and relays to suddenly slam on. I confirmed this by checking that the CFP has written to its internal flash memory card, and indeed variables suddenly are nil. On the PC it says that it cannot connect with the shared variables. This happens although LabView is not running on the PC!  Manager distributed system variables shared on the CFP are listed as (disconnected) during this time, but it continues to be able to read the correct values to live of the CFP entered the module.

  Interestingly, I have the same computer with the same configuration (and a PSC-2120 different) that does not have this problem. Both PC's are new from the factory. I tried to disable the second ethernet adapter, closing all wall-lights/virusscan and re - order network cards in windows networking/advanced settings without success. Simply disconnect the cable between the PCP and the PC does not cause this problem and shared variables become zero does not trigger the network on the CFP monitoring parameters.

  My questions are:

  (1) this problem can be fixed?

  (2) lost communication for a few seconds is OK, but given the PSC variables become zero is not. Can I stop the variables of the PSC to become zero?

  -David

  To update my previous post, it turns out that the re-installation was not the solution (the problem of variables start again occurring began). I finally realized that this only happens when I put the CFP time server IP (under Additional Configuration to the MAX). I was upgrading the server time on 192.168.1.1 IP (the IP address of the adapter of the CFP has been directly connected to). However, this compensation setting solves the problem.

  I do not think that the time on the CFP must need to be addressed too often (and perhaps it is synchronized if I never re - deploy files to the CFP?), so I guess that leave it empty. Curiously, I have the same setup time on an another PSC server IP and PC (running LV 8.6) without problem.

  -David

• HP 17-e049wm: How can I increase the video memory shared to the integrated graphics card?

  I recently bought a HP 17-e049wm. This laptop has the AMD Radeon HD8650G integrated graphics with up to 4206 MB total memory. I understand that this graphics 'card' using embedded memory as video memory. How can I increase or decrease the amount of memory allocated for graphics? I don't seem to be able to make changes from the BIOS. Is this something that adjusts automatically?

  Hello:

  Yes the PC controls the amount of system memory that is shared and there is no way for the user to control this feature.

• While error blue screen that clicked on the network and sharing Center icon

  whenever I click on network and sharing Center icon I got blue screen error and restarted p.

  Here are the event logs and sys inf.

  http://1drv.Ms/1tq4Y9M

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 00000005
  BCP2: 8530801C
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  SG

  There is evidence that this is caused by malicious software.  I would like to launch malwarbytes to eliminate this possibility

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

  If this comes back clean then it is related to the material, and because the DMP files mention Genuine Intel I ran the cpu stress test first.

  Try this free stress test: http://www.mersenne.org/freesoft/

  Prime95 Setup program;
  -Extract the contents of the zip file into a directory of your choice
  -Double-click on the executable file
  -Select "all stress testing.
  -Select the test of 'Blend '.  If you have already run MemTest overnight, you can run the test of "Small FFFS" instead.
  "Number of threads of torture test run" must equal the number of processors multiplied by 2 (if you use hyperthreading).
  The best way to do this is to go to the Manager of the tasks of the figure... The performance tab - and see the number of boxes that appear under the CPU usage history
  Then run the test of 6 to 24 hours - or until you get errors [b](whichever comes first)
  The selection of Test and the file stress.txt box describes the components that insists on the program.

  Stop 0 x 124 is a hardware error

  If you are overclocking try to reset your settings to standard processor and see if that helps.

  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).

  
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

  
  
  More advanced reading can be found here from a MS MVP IT PRO
  http://captaindbg.com/bug-check-0x124-whea_uncorrectable_error-how-to-troubleshoot/

• Host memory consumption is higher than the comments its use (incl. Cached) and overhead?

  I'm under ESXi 5.1. I don't have any custom reserve configured for memory. I'm running in CVS 'Sandy Bridge' mode.

  I noticed earlier than expected host memory consumed on many of my guests. This example comments running Server R2 2012 with the latest version of VMware tools running.

  VMware reports

  

  The guest operating system reports

  

  My understanding is that the "Standby" and "Modified" on the client contains the ' cache ', and the 'Cached' memory prompt is the typical response to this question that I see when people seek only to the memory of 'In Use'. In my case, I'm factoring in the memory cache, my guest shows 3805 MB of real memory, yet my host shows 7.68 GB of memory consumed host, with only 68 MB of general consumption. According to my calculations, the virtual machine should be only consume about 4.28 GB of memory.

  Post edited by: bradduane Replace the values of text with screenshots.

  I think I found my answer in the guide 'Understanding memory resources management' here: http://www.vmware.com/files/pdf/mem_mgmt_perf_vsphere5.pdf

  Section "when to retrieve memory host" page 15:

  «In the high State, the use of global memory machine virtual comments is smaller than the size of the host memory.» Whether or not the host memory is overcommitted, the hypervisor will not recover memory via hot-air balloon or permutation. (It is true that when the limit memory VM is not set).

  If memory free host down to the low threshold, the hypervisor begins to find the memory using the balloon. Balloon happens before free memory has actually reached the soft threshold because it takes time for the balloon pilot to allocate and PIN memory physics reviews. Usually, the balloon pilot is able to retrieve the memory in a timely order to keep free memory in the host above the soft line. »

  I checked esxtop, pressing "m" for the display of the memory, and I see that hosts VMKMEM shows 'State', so the only memory of way either currently retrieved is by sharing the page. Only when I start to run out of memory of the host, that this State becomes 'soft' or 'hard', balloon or Exchange will be held in order to free the "free" memory of comments. ESXTOP show my 'minfree"than 940 MB, while it shows that I physically 6960MB of free memory.