memory of reserved equipment occupies high memory

Similar Questions

• Satellite L650D-111 - reserved equipment of 64-bit Windows

  First of all I want to say that so far Toshiba online support was pathetic, all the pages that might have lead me to a useful address refused to load (and no it wasn't my internet), the site was confusing and it took me over an hour to get here. I can only hope that someone on this forum has an idea of what is wrong.

  I just bought my Satellite L650D-111 and it arrived yesterday and it's awesome set apart from a question he uses less than a third of the ram that should. It is a screenshot of the physical memory usage in resource monitor:
  http://I106.Photobucket.com/albums/m272/human_condition/PhysicalMemory.jpg
  The memory usage is constantly upward at 700-800 MB, which means that my laptop runs at about one third of the speed at which it should. My boyfriend who has a degree in computer science spent ages trying to fix and couldn't; should I just send it again?

  And what is the result? Your laptop is to slow or what? Did you notice performance issues? It has influence on the use of BONE or the use of certain applications to certain negative?

  What exactly your boyfriend made or tried so far?

• 13 GB of ram 'reserved equipment. "

  I have 16 GB of ram and I can use about 3 GB. I checked the Task Manager and it said that 13 GB of ram is material booked I really want to create videos of 60 fps on movie maker and this absurd issue prevents me. can anyone help? :(

  On Friday, October 9, 2015 23:14:27 + 0000, marcopolo666 wrote:

  I have 16 GB of ram and I can use about 3 GB. I checked the Task Manager and it said that 13 GB of ram is material booked I really want to create videos of 60 fps on movie maker and this absurd issue prevents me. can anyone help? :(

  You run Windows 32-bit or 64-bit? If 32-bit, read below:

  All versions of Windows 32-bit client (not just XP/Vista/7/8/10) have
  a 4 GB address space (64-bit versions can use much more). It's the
  theoretical upper limit beyond which you cannot go.

  But you can't use the whole address space. Even if you have a
  4 GB address space, most of the people cannot use around 3. 1 GB of RAM.
  This is because some of the space is used by the hardware and is not
  available for the operating system and applications. The amount you can
  use varies, depending on what hardware you have installed, but can
  range from as little as 2 GB to 3.5 GB. It's usually around
  3. 1 GB.

  Note that the hardware is using the space, not the real address
  The RAM itself. If you have a larger amount of RAM, the rest of the RAM
  goes unused because there is no address to map space to.

• Reserved hardware memory

  Hello

  I have 6 GB of RAM and Windows 7 32-bit. When I checked the system information, the RAM show 6 GB but only usable 2.94 GB. I checked the resource monitor and the reserved equipment use 3130 MB so I have 3014 MB left.
  My Question:
  1. Why reserved equipment use so much memory?
  2. Is it possible to reduce hardware reserved memory?
  3. Some people say, to use more than 4 GB of RAM, I need to install the 64-bit. Is it possible to use more than 4 GB of RAM in 32-bit? (The reason that I don't want to install 64-bit because it is not compatible)

  Please help me!
  Thank you
  samdar23

  ----------

  Replied

  Tuesday, April 2, 2013 15:16:46 + 0000, samdar23 wrote:

  I have 6 GB of RAM and Windows 7 32-bit. When I checked the system information, the RAM show 6 GB but only usable 2.94 GB. I checked the resource monitor and the reserved equipment use 3130 MB so I have 3014 MB left.

  My Question:

  1. why the reserved equipment use so much memory?
  2. is it possible to reduce hardware reserved memory?

  All versions of Windows 32-bit client (not just XP/Vista/7/8) have a
  Address 4 GB of space (64-bit versions can use much more). It's the
  theoretical upper limit beyond which you cannot go.

  But you can't use the whole address space. Even if you have a
  Address space of 4 GB, you can only use around 3. 1 GB of RAM. It's
  because some of the space is used by the hardware and is not available for
  operating system and applications. The amount you can
  use varies, depending on what hardware you have installed, but can
  range from as little as 2 GB to 3.5 GB. It's usually around
  GB 3.1. Your 2.94 GB is just a bit below average.

  Note that the hardware is using the space, not the real address
  The RAM itself. If you have a larger amount of RAM, the rest of the RAM
  goes unused because there is no address to map space to.

  3. some people say, to use more than 4 GB of RAM, I need to install the 64-bit.

  That is right.

  Is it possible to use more than 4 GB of RAM in 32-bit?

  N ° why do you want. If would you not better
  performance depends on what applications run you, but for most people, running
  a common range of office applications, there is no improvement.

  (The reason that I don't want to install 64-bit because it is not compatible)

  Not compatible with what? How do you know?

• Sudden increase in hardware reserved memory?

  I've had my current PC for 6 years. It has 8 GB of RAM installed and has been since I built it. It is always saved these 8 GB. But as of about a week before, he can use 6 of those, with 2 GB 'Reserved material'. The has not had changes to the material in about a year. The system has nothing hardware wise that can justify the taking of a quarter of my memory.

  Anyway to recover this memory?

  Specifications:

  CPU: i7 920 (this CPU has no integrated graphics)

  RAM: 8 GB DDR3 1333 MHz modules (4x2Go). (Triple channel)

  Graphics card: GTX 760 (2 GB of VRAM).
  Motherboard: Gigabyte EX58-UD3R

  OS: Windows 7 Pro (sp1)

  Hi Andy,.

  Thank you for your response.

  I have my apologies for the delay in response. I appreciate your efforts to resolve the issue. I will definitely help you with this.

  The amount of memory usable are not exact amounts. Usable memory is a calculated amount of total physical memory, less "reserved equipment." I suggest you refer to the below given link and check if it helps.

  https://support.Microsoft.com/en-us/KB/978610

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Satellite M100-126 - Win 7 32 bit indicates 'only' 3 GB of memory usable

  Hello

  Here's the situation:

  I have a Toshiba satellite M100-126 (PSMA1E - 0PV021FR) running Windows 7 32 bit.
  He had originally 2gigs of Ram, but after that my brother's cell phone broke down (motherboard failure) I took his 2x2gig of ram and installed in my laptop.

  Initially, the BIOS detected only 3gig, so I flashed the bios than that recommended by the Toshiba Download Center, i.e. v 3.0, http://support.toshiba-tro.de/tools/eula/calleula.asp?ID=66238 direct link (if it works). There is also a version 5.6, only for Vista, but I did not use that one.

  For now: the bios detects 4gigs and Windows, but windows says 'only' memory usable 3gigs.
  Windows resource allocation, 1gig is 'reserved material', so this memory usable 3gig. If I replace one of the modules by a 1gig module 2 giga, I get only 2 MB of the reserved equipment, and 3 gigs installed memory are usable...

  Here are the questions now:
  I am aware of the limit of memory for 32-bit systems, and that I won't be able to use the full 4gigs of anyway, but my brother got 3.5 GB of memory can be used on 32-bit system... Is it

  Hello

  Win 32 bit can allocate only 3.2 GB (not 3.5 GB)
  It is the limitation of all 32-bit operating systems.
  I put t see any problems here the BIOS detects 4 GB of RAM. It s ok.
  Windows can use 3 GB only because the other party is used by the graphics card.

  The GPU can share a part of the main memory too and it also depends on the available main memory.

  Good bye

• Windows 7 on Netbook Dell - memory-2 GB (1 GB usable) - why should I use only 1 GB of RAM? How can I make all 2 GB usable?

  I have a Dell Inspiron Mini 10v Netbook. It came with 1 GB of RAM and Windows 7 starter. Took me to upgrade to Windows 7 Ultimate and it's much better. Given that the memory was only 1 GB I installed a 2GB chip instead. The BIOS of the computer/is happy with it, but Windows 7 will use only 1 GB of it.

  Resource monitor scored the extra 1 GB has "reserved equipment." They have no reserved before the addition of the extra RAM.
  I want to use all my memory! Help!

  Hi pcstan

  I would like to know what version of the operating system are you using? It is 32-bit or 64-bit?
  You can try the following methods: -.
  1. change setting memory remapping in BIOS. This setting can have different names, look at the motherboard or computer manual.
  2. run msconfig.exe. Under Startup go to advanced options and change your maximum memory available.
  This can help you
  Concerning

  Vipul Taneja. http://www.vipultaneja.com

• Where is the sound?

  Hi, I have a new Hp pavilion dv6, windows 7 and having trouble with the sound.  Cannot make it work.  Was using Skype and thought that this might have caused the problem, but since Skype has been removed I still get all the sounds.  What should I do?

  Welcome to the Forum.

  If it worked before, it could be a setting.

  Here are a couple of things to try without knowing much about what's going on...

  When you open the tab reading below - make a right click on it (see where the mine has a green check mark, around that area) and make sure that the device are not disabled.  If so, then "activate."  Pouf.  Fact.  -Go through and make sure that all of this is that you need / like it.

  Control Panel-> sound-> reading

  Click on the speakers and headphones

  
  

  If 'Speakers and headphones' are not the default setting, then make the "Default".

  Then try a test with "Configure."  You can continue with this...

  

  Optional - this can help if the sound is displayed but is not good:

  Speakers and Headphones-> tab Properties (lower right corner),

  Select and go to 'Advanced Options' - then select "24 bit - 96000 Hz".

  NOTE: See CHANGES below!  November 4, 2011

  Apply

  

  CHANGES!  November 4, 2011

  Some time previously, I tried (successfully) the 24 bits, 96000 setting.  I have learned since then that it is simply not possible for most of the systems (not to mention most of the computers) make use of this context.  In fact, in some cases, it can be detrimental to the quality of the sound.  Well, live and learn.  Nearly thirty years I have learned good taste of Corneille and the value of own mistakes.

  I left in the chart, because he is seen as he scored.  I add these words of correction to clarify: in many cases the adjustment may actually provide an optimal sound, even if it is in fact a mistake.  In some cases, depending on your own system, this 24-bit equipment, 96000 setting can come back and "bite".  If the setting works, then let him, or consider changing to that shown below.

  Here's the big problem with this setting (so I hear): If you check out music, it makes your bigger files.  Unless you have some equipment very high-end, some very high expectations and some serious on the disk and memory to burn, you don't want to burn a lot of music for this parameter.  Ah, tasty Crow.

  Speakers and headphones - advanced - 16 bit, 48000 Hz DVD

  

  There are a few other things "Advanced tab", you can play.

  If you have trouble with, say, Skype or games or other applications containing the sound.

  then CLEAR the checkbox "exclusive Mode".

  End of November 4, 2011 CHANGES

  I hope this helps.

  The other place to check and watch is 'Sounds' tab (above the Read tab) - you can adjust it as your sound 'system sounds' like - choose 'Cityscape', 'Delta', 'Garden '...

  Good luck.

• 3 1 GB / 8 GB of ram can be used on Windows 7 64 bit

  Hello

  I recently bought a new W510 with windows 64-bit, and 8 GB of ram, however, both in the Task Manager and resource monitor, the available RAM is said to be about 3 GB. In the resource monitor, a massive 5 GB is "reserved equipment." The W510 has a discreet graphics card, I doubt that any amount of material would require 5 GB of memory reserved.

  Does anyone know how to remedy this?

  So, I'm a bit disappointed by the fact that the computer came with 30Gb (!) already used hard drive, and which excludes the 10 GB recovery partition. I wasn't aware that Lenovo tends to install on computers.

  Finally, the left click is very sticky and often will be stuck down. The computer is new, and frankly I'm a little disappointed that the mouse does not work properly.

  Dfarce

  The memory is a known issue with the bios.20 and has been resolved if you install the latest version of the bios (.24 I think)

• message does not

  I use Windows 7 Home version and when I run an application or a program like acrobat my laptop often stalls drive and I get the message "not responding".

  In Windows 7, use Ctrl + Shift + Esc instead of Ctrl + Alt + Delete. It lets you in the Manager of tasks more quickly. Select Task Manager, performance, resource monitor tab and tab memory. What are the numbers for reserved equipment, in use, modification, sleep and free?

  Is your Windows 7 32-bit or 64-bit? The amount of RAM is installed?

• Office randomly freezes, can't open all the desktop icons

  Original title: desktop windows 7

  Windows 7 64-bit. Office randomly freezes cannot open all the icons of the Office dies just.

  I need to restart the pc to make it work again thanks for any help you guys can come up with.

  Jim.

  Jim

  In Windows 7, use Ctrl + Shift + Esc instead of Ctrl + Alt + Delete. It lets you in the Manager of tasks more quickly. Select Task Manager, performance, resource monitor tab and tab memory. What are the numbers for reserved equipment, in use, modification, sleep and free?

  Is your Windows 7 32-bit or 64-bit? The amount of RAM is installed?

  Restart your computer and wait 30 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• In performance parameters, run FASTER, the OPTIONS of PERFORMANCE IN == ADVANCE = run FASTER, * it TOLD me TO DISABLE SOME SETTINGS, could you TELL ME WHAT SETTINGS I CAN UNCHECK.

  * Original title: TO RUN FASTER, IN PERFORMANCE OPTIONS

  in the properties of systems, performance parameters, run FASTER, the OPTIONS of PERFORMANCE IN == ADVANCE = run FASTER, * it TOLD me TO DISABLE SOME SETTINGS, could you TELL ME WHAT SETTINGS I CAN UNCHECK.

  When and where your computer is slow? Is the time required to start-up or after the reboot is complete? Browse the internet or work on files offline?

  Select Start, run, type msconfigand press the ENTER key or click on the Startup tab. You will see a window like the image below. What elements are there?

  In Windows 7, use Ctrl + Shift + Esc instead of Ctrl + Alt + Delete. It lets you in the Manager of tasks more quickly. Select Task Manager, performance, resource monitor tab and tab memory. What are the numbers for reserved equipment, in use, modification, sleep and free?

  Is your Windows 7 32-bit or 64-bit? The amount of RAM is installed?

  THE IMPACT OF THE COMPUTER ON THE PERFORMANCE SPECIFICATION
  http://www.gerryscomputertips.co.UK/performance1.htm

• Microsft Word does not

  I can't open any of my Word documents I have previous created... also cannot start a new Word Document... I get the following error messages:

  Microsoft Word does not and then options to close the program or wait for the program to respond... with none of that always works

  also getting

  Micrsoft Word for Windows has stopped working

  A problem caused the program to stop working correctly, Windows will close the program and notify you if a solution is available... nothing happens... nothing sent

  Another mistake is very strange when I try to open Word or Open Office

  There was a problem sending the command to the program... on top of this error message lists P:\Pogoplug Cloud\Canon reg doc 15% coupon.

  I am ready to throw this laptop out the window, I had this problem since the spring... I think I'll go and delete such things Pogoplug

  Please, help me, I'm at my wits end... Andrea Donovan... .... (;-)

  Andrea

  In Windows 7, use Ctrl + Shift + Esc instead of Ctrl + Alt + Delete. It lets you in the Manager of tasks more quickly. When locking the computer select the Task Manager, performance, resource monitor tab and tab memory. What are the numbers for reserved equipment, in use, modification, sleep and free?

  Is your Windows 7 32-bit or 64-bit? The amount of RAM is installed?

  Select Start, Control Panel. Action Center, click on the down arrow to the right maintenance, click view reliability history. In the chart, you will see red orbs, click on one and it gives details and to the right are another link saying see technical details. You can copy and paste the description in a new message to. Repetition of reports are more relevant than the one off of problems.

• Windows 7 performance issue when he out of the idle situation

  For all the last months when I start windows it will work fine, all programs, IE, as long as I continue to use the computer.

  If I'm away from the computer for an hour or two when I get back to Windows it cannot find all the programs, e-mail,

  Task Manager and even IE cannot stop him, I have to use the power button / stop. Then when I reboot and Windows

  same cycle load all over again.

  I ran Malwarebytes, Combo Fix, an assortment of rootkits even reinstalled Windows nothing helped.

  Anyone have any ideas?

  Thank you, Alan

  Original title: Windows 7 run before oneself times

  Alan

  In Windows 7, use Ctrl + Shift + Esc instead of Ctrl + Alt + Delete. It lets you in the Manager of tasks more quickly. Select Task Manager, performance, resource monitor tab and tab memory. What are the numbers for reserved equipment, in use, modification, sleep and free?

  Is your Windows 7 32-bit or 64-bit? The amount of RAM is installed?

  

• Windows 7 is slow by GLACIERS.

  I have a very strange problem. I just bought a hard drive of my WD 6 t cloud. Some of the installed software. Everything was fine. After the last windows auto update, however, my OS runs s l o w m o t i o n. The animation of window restoration work at 2 frames per second. As with any video I want to watch. However, the task manager's CPU as idle 90 + %. Any suggestion would be appreciated. (Even the use of the drive does not seem to indicate a fly...)

  Joe

  In Windows 7, use Ctrl + Shift + Esc instead of Ctrl + Alt + Delete. It lets you in the Manager of tasks more quickly. Select Task Manager, performance, resource monitor tab and tab memory. What are the numbers for reserved equipment, in use, modification, sleep and free?

  Is your Windows 7 32-bit or 64-bit? The amount of RAM is installed?