Method call is not FIFO beginning in LV 2015

Hello

I'm trying to get the data on my hard drive using cRIO 9075 and I do request the following tutorial:

http://www.NI.com/Tutorial/11198/en/

In steps 21 and 22 in this tutorial, request using Invoke FIFO method by selecting Start

There is no such selection

Any help?

Thank you

For your project, it will be given > start. The tutorial selected FIFO > start because they wanted to start DMA FIFO named FIFO. Your FIFO DMA is named Data that's what you start.

Tags: NI Software

Similar Questions

NIDAQmx fails with 'pure virtual method called' when calling DAQmxStartTask

I'm running on Linux Fedora-15 and I see a 'pure virtual method called' message in the system log when you call DAQmxStartTask

If someone has encountered this?

Here is the stack trace:

Program received signal SIGABRT, abandoned.
[Switching to thread 0xb423eb70 (LWP 11204)]
0xb770f424 in __kernel_vsyscall)

Program received signal SIGABRT, abandoned.
[Switching to thread 0xb423eb70 (LWP 11204)]
0xb770f424 in __kernel_vsyscall)
(gdb) where
#0 0xb770f424 in __kernel_vsyscall)
#1 0x456b90ef in raise () from /lib/libc.so.6
#2 0x456baa25 in abort () from /lib/libc.so.6
#3 0xb677c287 in? (from /usr/local/lib/libnidmxfu.so.1)
#4 0xb677c2d4 in? (from /usr/local/lib/libnidmxfu.so.1)
#5 0xb677c4c7 in? (from /usr/local/lib/libnidmxfu.so.1)
#6 0xb666d4de in? (from /usr/local/lib/libnidmxfu.so.1)
#7 0xb67da514 in nNIMSAI100::MAPIControl130 (nNIMSAI100::tTask *, unsigned long, unsigned long & nNIMDBG100::tStatus2 &) (/usr/local/lib/libnidmxfu.so.1)
#8 0xb69be31e (/usr/local/lib/libnidaqmx.so DAQmxTaskControl)
#9 0xb69be3f5 (/usr/local/lib/libnidaqmx.so DAQmxStartTask)
#10 0xb69fc3fe in CMdlNI6509::readPort (unsigned short, unsigned char *))
of /var/www/html/tsw/runtime/devices/libDevDigio/libDevDigio.so
....

What is installed on the system is:

nidaqmxcfgi - 1.4.0 - f0.i386
1.4.1 - nidaqmxef - f3.i386
1.6.1 - nidaqmxcapihelp - f0.i386
1.6.1 - nidaqmxcapii - f0.i386
1.6.1 - nidaqmxcapiexmp - f0.i386
1.6.1 - nidaqmxswitch - f0.i386
nidaqmxhelp - 1.0.2 - f0.i386
nidaqmxinfi - 8.0.1 - f0.i386

If an output on the DigIO port is used as an input, this is the behavior if StartTask is called.

Turns out that we were not catch the error of DAQmxCreateDIChan properly.

Contextual dialog box before you call network - not in the EXPECTED order

In my application, I would like to display a dialog box, while the application is retrieving data from a web server. What I find is that the dialog box is not displayed until the data recovery is complete. Don't know what I'm doing wrong, but here are my code snippets. Suggestions are appreciated.

public class HomeScreen extends MainScreen  {

    private ImageScreen imageScreen;

    private MenuItem  viewImage = new MenuItem("View Image",100,10) {
      public void run() {
            imageScreen = new ImageScreen();            UiApplication.getUiApplication().pushScreen(imageScreen);
         imageScreen.getImage();
      }
    };}

public class  ImageScreen extends MainScreen {   private Dialog statusDlg; 

   public ImageScreen() {           statusDlg = new Dialog("Loading...",null,null,0,icon);       

       // some other initializations here   } 

    public void getImage() throws Exception {        statusDlg.show();

        // create the connection...        HttpConnection conn = (HttpConnection) Connector.open(URL,Connector.READ_WRITE, true);        conn.setRequestMethod(HttpConnection.POST);

        // set paramters and write out requests here        .        .        .

        // open input stream to get response from server        InputStream in = conn.openInputStream();

        // process the response        processResponse(conn.getResponseCode(), in);          

        // close everything out        .        .    }  

    public void processResponse(final int HTTPResponseCode, final InputStream inputStream)     {

      UiApplication.getUiApplication().invokeLater(new Runnable() {        public void run()        {          statusDlg.close();

          // process response here          .          .          .        }      });        }    

}

I want to see is a blank screen with a pop - up dialog box indicating that the data is "Loading"... ", while imageScreen.getImage () is executed (I voluntarily added latency in my HTTP response to simulate the network latency). But instead, I see that the application remains on the screen (home screen), while the data are read. Once the data is extracted, the new screen (ImageScreen) is displayed and the dialog box opens for a fraction of a second.

I hope this makes sense. I can clarify more, otherwise.

It's because you make blocking network operation of e/s on the event thread (aka user interface thread). The getImage method is called on the thread of the event, this method calls the blocking network i/o operation. After processing the event of the user interface that caused the getImage method is called, the event thread starts processing the next events, which tells the OS to display your popup. This, obvsiouly, doesn't happen until GetImage ends.

What GetImage should probably do is network IO unloading in another thread (for example, starting a new thread).

Asynchronous method call.

Is it possible to do an asynchronous method call?

I mean this: when a view is loaded I would like first of all to display the interface to the user and when the data is retrieved from the web server, load the data into the view. If the user must wait until the data is retrieved for the view. For this first step how do we proceed? And secondly, I would like to know if it is possible an asynchronous call to create the view and load the data so that even if this could make the application faster.

Hey charly,.

You should be able to achieve using the load() to URLLoader objects. When loading the content of a web page, the load method is asynchronous. Based on the State of the load() method that you can check if its operation is complete using the Event.COMPLETE event. Like this:

package
{
    import flash.display.Sprite;
    import flash.display.StageAlign;
    import flash.display.StageScaleMode;
    import flash.events.Event;
    import flash.net.URLLoader;
    import flash.net.URLRequest;
    import flash.text.TextFieldAutoSize;

    import qnx.ui.buttons.LabelButton;
    import qnx.ui.text.Label;

    [SWF(width="1024", height="600", backgroundColor="#CCCCCC", frameRate="30")]
    public class URLLoaderTest extends Sprite
    {
        private var loader:URLLoader;
        private var request:URLRequest;
        private var myTextField:Label;
        private var myBtn:LabelButton;

        public function URLLoaderTest()
        {
            super();

            // support autoOrients
            stage.align = StageAlign.TOP_LEFT;
            stage.scaleMode = StageScaleMode.NO_SCALE;

            request = new URLRequest("http://www.digg.com");

            loader = new URLLoader();
            loader.load(request);
            loader.addEventListener(Event.COMPLETE, handleData);

            myTextField = new Label();
            myTextField.setSize(100, 50);
            myTextField.setPosition(10,10);
            myTextField.textField.autoSize = TextFieldAutoSize.LEFT;

            myBtn = new LabelButton();
            myBtn.label = "This will already be here";
            myBtn.setSize(200, 70);
            myBtn.setPosition(10, 50);

            addChild(myTextField);
            addChild(myBtn);

        }
        private function handleData(e:Event):void
        {
            myTextField.text = "Complete!";
        }
    }
}

as you will see that loads everything on the screen even if the site is not fully loaded via URLLoader object. Once this is done, it calls the handData() function and the object Label is filled with the words "complete." the same concept apply to any situation involving the URLLoader.

hope that helps. Good luck!

Each call cause VerticalFieldManager.add (child) to "available" to already added childs method call.

Is it possible:
-ban VerticalFieldManager child call "sublayout" at the beginning;
-Add multiple items;
-push the VerticalFieldManager to call "sublayout" of all children.

Here are two possibilities:
1. Call UiEngine.suspendPainting (true) before adding the items, then call UiEngine.suspendPainting (false) (and perhaps invalidate()) later. Note that UiApplication implements UiEngine. I'm not sure that it works; It can only block calls to object, but it can also block calls to sublayout.
2. Remove the VerticalFieldManager of his manager (or screen) before adding items. It may be that a Manager will not call sublayout if they belong to a screen.
If none of these work, you can create a subclass VerticalFieldManager, add an indicator variable that indicates whether sublayout should move forward and then override sublayout in order to respect the flag. You can force a sublayout at the end by calling invalidate().

Cannot create a custom SOA Gateway-> error integration interface: meta-method type hash_of_lists not recognized as a type of compatibility V1 (cannot mix options v1 & v2)

Hello
Steps to create a custom integration interface
- Download the model of virtual machine of EGGS and the oracle Installer 12.2.4 did with success (instance VISION)
- Tired of creating new interface but I got an error like below
- According to the oracle documentation "Oracle E-Business Suite integrated SOA gateway Implementation Guide" then as follows to install the perl module.
- After that, when I tried to return the script get errors like below
  - Meta-method hash_of_lists type not recognized as a type of compatibility V1
  - (cannot mix options v1 & v2)
  - to the /u01/install/VISION/fs1/FMW_Home/webtier/perl/lib/site_perl/5.10.0/x86_64-linux-thread-multi/Class/MethodMaker.pm of line 24
  - BEGIN failed--compilation abandoned at /u01/install/VISION/fs1/EBSapps/appl/fnd/12.0.0/perl/FND/irep/repo/Rep/Loader.pm line 691.
  - Compilation failed to require online /u01/install/VISION/fs1/EBSapps/appl/fnd/12.0.0/perl/FND/irep/repo/Rep/Annotation.pm 46.
  - BEGIN failed--compilation abandoned at /u01/install/VISION/fs1/EBSapps/appl/fnd/12.0.0/perl/FND/irep/repo/Rep/Annotation.pm line 46.
  - Compilation failed in require in /u01/install/VISION/fs1/EBSapps/appl/fnd/12.0.0/perl/FND/irep/repo/Rep/Parser.pm line 172.
  - BEGIN failed--compilation abandoned at /u01/install/VISION/fs1/EBSapps/appl/fnd/12.0.0/perl/FND/irep/repo/Rep/Parser.pm line 172.
  - Compilation failed in require in /u01/install/VISION/fs1/EBSapps/appl/fnd/12.0.0/bin/irep_parser.pl line 37.
  - BEGIN failed--compilation abandoned at /u01/install/VISION/fs1/EBSapps/appl/fnd/12.0.0/bin/irep_parser.pl line 37.
Can someone solve this problem.
Thanks in advance

Have no experience with this, but MOS Doc 1400165.1 may be useful

How to pass attribute values after ExecuteWithParam to the method call
Hello

I use Jdev 11.1.1.6.

My use case, is that I have mainPage BTF which has ExecuteWithParam as the default activity. It filters the VO using params. I have a requirement to store some of the attributes of current line to pageFlowScope which must be sent to several taskflows child.
I present a method call after the ExecuteWithParam event and before the page is rendered but do not know how should I pass the current line (or something) in this method call to store values on pageFlowScope.

What should I switch to this bean managed to store values on pageFlowScope? Is there an alternative?

Thank you
JAI
I see two possible ways to get to the attributes. First of all, you can get the iterator current rank and get attributes here. Secondly, add you links attribute in the file pageDef methods for all attributes that you are interested in. Then you access it by using the attribute binding. I never tested the 2nd method, but I guess that the framework will fill the attribute links, as it does in a normal page.

Sorry, can't give you enjoy this code adds that I'm not in front of a PC.

Timo

Method call as default activity in ADF task flows
Hello

I have a workflow to execute a method on the page loading to set cookie values.
I added a control method of data as the default activity in the workflow. But it is not called immediately, it is executed only if it is called from another view.

Any help will be appreciated.

WebCenter Portal App 11.1.1.6

Code workflow task:

<? XML version = "1.0" encoding = "UTF-8"? >
< adfc-config xmlns = "http://xmlns.oracle.com/adf/controller" version = "1.2".
ID = "___5" >
< task-flow-definition = id "cookie-task-flow" >
< default activity id = "__17" > addEmpNoCookie < / default activity >
< transaction id = "__38" >
< new-transaction / >
< / transaction >
< data-control-scope id = "__39" >
< shared / >
< / data-control-scope >
< managed-bean id = "__1" >
< id managed-bean-name = "__4" > cookieBean < / managed-bean-name >
< managed-bean-class id = "__3" > tr.com.signum.roketsan.utils.CookieBean < / managed-bean-class >
< managed-bean-scope id = "__2" > pageFlow < / managed-bean-scope >
< / managed-bean >
<-l' call the method id = "addEmpNoCookie" >
< method id '__8' = > #{bindings.addEmpNoCookie.execute} < / method >
< result id = "__16" >
< id fixed-result = "__7" > addEmpNoCookie < / fixed-results >
< / results >
< / method >
< use-page-fragments / >
< / task-flow-definition >
< / adfc-config >

Def of the activity of the Middle page of

<? XML version = "1.0" encoding = "UTF-8"? >
< pageDefinition xmlns = "http://xmlns.oracle.com/adfm/uimodel."
version = "11.1.1.61.92".
ID = "cookie_task_flow_cookie_task_flow_addEmpNoCookiePageDef".
Package = "TR.com.Signum.roketsan.pageDefs" SkipValidation = "true" > "
< Settings / >
< executables / >
< links >
< methodAction id = "addEmpNoCookie" RequiresUpdateModel = "true".
Action = 'invokeMethod' MethodName = "addEmpNoCookie."
IsViewObjectMethod = 'false' DataControl = "CookieBean."
InstanceName = "CookieBean.dataProvider" > "
< NamedData NDName = 'cookieValue.
NDValue = "#{webCenterProfile [securityContext.userName] .employeeNumber} '"
NDType = "java.lang.String" NDOption = "3" / > "
< / methodAction >
< / links >
< / pageDefinition >
Hello

It contains only the activity of the method, and if so, why is he launched with the help of a new transaction? Note that navigation always is an ID of the view and the workflow will not run if there is no view to navigate to. So either the calling flow calls this workflow and workflow returns immediately after execution of the activity of default method then it refers to a display of flow tasks calling or you add a view. Note that cookies are set on the response of a call and it is not issued before coming to a view. For this reason, using a method call activity could be a bad approach to try this so a phase listener is better suited

Frank

To access a page method call parameters jsf page fields
I have a workflow with a single method, call the execution after a point of view (jsf page).

The view is a jsf page that allows to edit several fields to then filter a view object. This inputtext fields - components in general-have no connection.

The next step in the workflow is executing a method call that takes these parameters - values entered previously in the jsf page - and to run a vo.setwhere and then a vo.exeuteQuery methods but I need the input provided in the previous page. I don't know what is the best method to get access in the ADF.

I usually pass parameters to the method call in the page 'Change the binding of the Action', section 'settings' via EL expressions.
You can have a support with scope pageFlow bean and bind the attribute to the property value as John mentioned. However, if you do not want to generate a bean, you can simple binding to a pageflow scope variable (might be created automatically).

Something like
```
value="#{pageFlowScope.someVariable}"
```
and then for the methodCall activity, set the value of the parameter to the same as above EL.

Arun-

Passing parameters to the method call in expressions of value
JDeveloper 11.1.2.1.0 does support the feature of passing parameters to method calls in expressions of value in JSF pages? AFAIK this is JSF 2 version it and it should support this feature. Unfortunately when I put in a JSF page the following tag
< h:commandLink value = "#{row.employeeId}" action = "#{empBean.showDetails (row)}" / > "
The page does not work. Any ideas on this point?

Thank you to everyone.
Hello

The functionality you need is defined in JSR 245.
If you need to wait for it to become part of the standard, it will be included in JEE6
I don't know if 11.1.2.1.0 uses JEE6 standard...
You can try this other thing,
http://www.coderanch.com/t/213290/JSF/Java/why-JSF-calls-method-parameter

OAException: Illegal method call because there is no connection to the base.
We are gertting this error when connecting

Details of the exception.

oracle.apps.fnd.framework.OAException: the method call illegal because there is no connection to the base.
at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1251)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:2195)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:543)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:431)
+ OA. jspService(_OA.java:212) +.
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)

Database version: 11.2.0.2.0
Application version: 12.1.3

Published by: Vicky-DBA on February 7, 2011 05:23
Salvation;

What is your EBS and the OS? DB version? How do you get this error, what is your steps?

It worked before? Any newspaper in the alerts log and log apache?

Check these notes:

Manage results [ID 1277384.1] Java.Lang.Nullpointerexception purchase order tax
Create a customer in AR, attempt to remove the vacuum Business purpose-error [1178665.1 ID]

Respect of
HELIOS

10.1.2 EZ way to check method calls until I change and break them.
Is there a way to JDeveloper to see what methods call a method (incase I make changes, I do not break several pages)?
Well, if you have upgraded to JDeveloper 10.1.3 or 11g, you would have had the option of menu uses find to help you with this.
Why are you still using 10.1.2?

I lost my bootcamp partition after update to El Capitan (solitary method T did not work for me!)

I lost my bootcamp partition after update to El Capitan (solitary method T did not work for me: () is lost forever?)

I can't access my files or the partition from the finder

My bootcamp partition size is 380 GB.

This is all the information on the situation:

sudo TPG - r - vv show disk0

sudo fdisk/dev/disk0

diskutil list

sudo-l/dev/disk0 Gdisk

sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

Sudo gdisk/dev/rdisk0

in IPARTITION

My bootcamp partition is referred to as a free space

in the finder

Thanks a lot for your help!

How do you have a 100 MB NTFS file system and free space after the partition of 100 MB. You have a MSR (100 MB), but your windows are the current MSD.

SIP is activated. Your MBR has no bootable entry, because it is not marked. Please describe in detail what steps were tried.

What is the year/model of your Mac?

Video call does not

When I talk to another person via Video Call my WebCam video watch is not for me or anyone I speak.
My WebCam Logitech WebCam HD c525 and I
Skype latest version 5.10.0.116
and the latest Logitech drivers for my cam.
After I finished my call (audio call works fine) I download Skype to show me video on call quality information.
I download Skype to show video me when I don't speak quite ok, but the video stops when calling start and get my webcam tab "!" even if cam has been recognized and showed video via the dialog box call quality information.
It's my connection speed
http://www.Speedtest.net/result/2157728867.PNG
and I have no problem with the connections with others (green bars)

Video worked for me on earlier versions of Skype but I don't know when problems began, because I was not I use the webcam for some time and, in the meantime, I've updated Skype several times.

I restart Windows and then, usually when the updates are.

Video calls was not working for weeks so simple reboot wasn't the solution.
Somehow restart in Windows safe mode helped.

How it happened I don't know and is not important, that I will accept the reboot in SafeMode as a solution when Skype is bad conduct.

Arrows turn on Skype logo, all contacts show unavailable, IM is available, calls are not

Hello! I use Skype 7.18.66.103 on Windows 7 x 64. From 11 January 2016 he behaves badly - arrows turn on Skype logo, all contacts are shown to be unavailable, but can I do IM with them. Calls are not available. I have reinstalled it several times with profile user, registry cleaning and removal of Skype tool. I tried to change the connection settings. IE11 connection settings. Windows Firewall settings. Unfortunately, nothing helps. Please, help to return my Skype to stabilize the condition. Thanks in advance.

After discussing with the help of Skype we downgraded in 7.18.0.109 and it works great so far

Method call is not FIFO beginning in LV 2015

Similar Questions

Maybe you are looking for