Migrate from Fusion Middleware Webcenter Application Application

Similar Questions

• WebCenter spaces and Fusion (Appl Core) Applications - How do we tie - up?

  Just installed Webcenter. There are some nice features like social networking, discussions, streams of activity, worklist integration etc. An important feature that caught my attention was the DT@RT component (specifically, editing special-stream via the web). To using this component only modify the Webcenter applications? I'll be able to edit taskflows built using the application libraries and deployed within an application from merger running in a field of autonomous fusion?
  
  Also the ADF applications can be built apps Webcenter or Fusion (appl core) (because the data controls are available in both). As a general rule, what features are implemented via Webcenter applications and which are implemented using the essential applications of Fusion appl?
  
  Thank you
  Sam
  
  Published by: 899841 on November 29, 2011 19:43

  That's the beauty of the WebCenter. In its essence, it is nothing more than a Web Application of merger with lots and lots of additional libraries.
  All the features available to you in a merger application, you can also use in a webcenter application. You can create a model project that uses business components, you can create a taskflows as you would normally do a fusion web app.

  It is advisable to separate these features and develop transactional functionality in a separate application and deploy it as a shared ADF library and include it in your app webcenter. Using the catalogue of resources, you can add these taskflows on any page during execution.
  Using webcenter services, you can also include some services like tagging, linking, documents and so on in your own taskflows which gives it that extra touch of your generation taskflows custom.

• Migrating from a version of the 11.1.1.3.0 for 11.1.1.7.0 ADF application.

  Hello

  I have a n requirement to migrate a version of the 11.1.1.3.0 for 11.1.1.7.0 ADF application.

  I just used JDeveloper 11.1.1.7.0 helps to migrate.

  What I need to follow measures during migration or any specific changes required for this.

  Any suggestions for this migration.

  I thank very you much for your time.

  Kind regards

  Konda Reddy

  dvohra21 migration of an extension isn't applications same then migration.

  Konda, you should check the release notes for the target version, where you should find some information about the migration from versions older. In your case check 11 g R1 (11.1.1.7.0) Release Notes and look for issues on migration. You can then access information on Certification that the migration is possible.

  Timo

• Planning application migration from SQL Server 2005 to SQL Server 2008.

  We have a DB SQL Server 2005 to 2008.

  Customer is underway for DB Upgrade only and not upgrade the Hyperion applications.

  Hyp version: 11.1.2.1

  Components: Planning Hyp, EN and related services, ODI.

  I intend to

  1 put level SQL Server side by side and not place

  2 migrate Legacy applications on new server

  If someone has done this before faced any problem? I see no any problem which should appear as a result of migration from 2005 to 2008 Server, but I wanted to be clear about this. How to plan the application will manage the change in DB.

  Is there a method / recommended for this migration?

  Thank you

  Anjum

  SQL Server upgrade does not impact on Hyperion.

  If in the case of practice on different servers, I mean 2005 server 2008 Server, we have to configure again.

  Thank you

  Mady

• Best way to migrate the Apex in Production applications - how users are affected?

  
  Hello

  We have been migrating our apex in production applications after the opening hours to try to minimize the impact on users. Can the affected users if they use the application while migration is taken?

  It's how we migrate:

  -We export enforcement apex of the development environment. This creates a SQL file.

  -Then the SQL file is imported into the Production by using the option 'reuse application ID export file XX'

  Please let me know if there is a better way to move the application in production, and if the user isn't be affected if we during opening hours.

  Thank you

  Violeta

  Hi Violeta,

  Violeta wrote:

  We have been migrating our apex in production applications after the opening hours to try to minimize the impact on users. Can the affected users if they use the application while migration is taken?

  It's how we migrate:

  -We export enforcement apex of the development environment. This creates a SQL file.

  -Then the SQL file is imported into the Production by using the option 'reuse application ID export file XX'

  Please let me know if there is a better way to move the application in production, and if the user isn't be affected if we during opening hours.

  Yes for sure users will be get affected when you replace the current with a new app, if they use it at the same time.

  Another best way to move the application to the production (keeping the same URL of deployment) is to use the Application Alias for your URL of the App Production.

  In this way, you can import the application while users are using the old application. And then after opening hours all you have to do is delete the alias from the application of the old app and assign this alias to your new application.

  Refer to the following response: Re: versioning in Apex (the thread is on version control, but, in this reply, I have explained the deployment of Application Alias method).

  I hope this helps!

  Kind regards

  Kiran

• I have a single folio paid app and I want to migrate to a mult folio app with each folio available for purchase. How can I migrate those who bought my application single-folio so that they are able to keep the folio they paid for in the new folio multi ap

  I have a single folio paid app and I want to migrate to an app of folio to multi with each folio available for purchase. How can I migrate those who bought my application single-folio so that they are able to keep the folio they paid for in the new folio multi application?

  I'm sure that the only way to proceed is to make a free portfolio for all the world in your new application of muli-folio. There is no way to match the records of the purchase of an application with a new application that contains a folio.

  Apple wants to see at least one element of the library is available free of charge, in any case if the application has a utility when downloaded from the store anyway.

  Neil

• Taskflow in my webcenter application

  Hi people,
  
  I created a Webcenter application and inside it a custom taskflow, now I would like to add this taskflow in my catalog of resources, but I have read that I need to deploy in a jar.
  
  My question is, even my taskflow is my application, I need deploy it in a jar, add in my application and therefore in RC? Or I can add a few references directly from my Webcenter application.
  
  I tried this:
  
  
  < resource id = 'job-workflow-definition '.
  repository = "application.classpath"
  path="PortalIT7.war/ADF_TaskFlow/Web-INF+taskflows+conteudo-definition.XML#task-flow-definition"/ >
  
  This:
  
  < resource id = 'job-workflow-definition '.
  repository = "application.classpath"
  path = "WEB - INF + taskflows conteudo - accordingly #-definition of task-flow" / >
  
  But no one works.
  
  Thks in advance

  I have not tried to add a taskflow since the classpath of the application to a catalogue of resources.
  But by it is recommended, you must create several jars for your application and your taskflow. Especially if you want to add your taskflow to your catalog of resources because if you have another application that wishes to use the taskflow even you cannot reference easily it unless you add the full jar file in the lib of the other application.

  Then, create a new application and deploy it as a library of the ADF. You should be able to reference which...

• Expose the ADF existing as a portlet in a WebCenter application

  Hello
  
  We have an ADF 11 g application deployed on Weblogic Server. We want a POC (Proof Of Concept) where we expose this application as a portlet in WebCenter. I am new to WebCenter and grateful if you can give me some pointers to integrate an existing 11g ADF with WebCenter application.
  
  Kind regards
  Antony.

  From my own experience, I used the Portlet JSF Oracle bridge at portletize my JSF pages and workflows. There are examples in OTN: [Portletize a JSF Application Using Oracle JSF Portlet bridge | http://www.oracle.com/technetwork/developer-tools/jdev/ccset62-all-100884.html]

  This white paper describes how the workflow portletize.

  Blog of Peter Moskovit has a number of publications on the topic:

  http://pmoskovi.WordPress.com/2008/07/23/building-JSF-portlets/
  http://pmoskovi.WordPress.com/2008/07/18/JSR-301-the-JSF-portlet-bridge/

  Hope that helps.

  CAPPA

• Do you have Oracle Fusion Middleware Infrastructure Installer 12.2.1 and content Webcenter 12.2.1 Support windows server 2008 R2?

  Do you have Oracle Fusion Middleware Infrastructure Installer 12.2.1 and content Webcenter 12.2.1 Support windows server 2008 R2?

  Hi Saif,

  This is not supported for the content... Please check the certificate of the MOS

  Support content 12.2.0.1 MS x 64 64 bit 2012 and 2012R2 and same is applied to the installation of Oracle Fusion Middleware Infrastructure program.

  

  Thank you

  Amey

• My style course custom portal - skin.css non-reflecting file in my portal webcenter application.

  
  In my portal webcenter application, I have a model to my home page. The model has a "happy" = facetName I've included a header.jsff outside the facet of content for the header section.

  I added my custom for the portal file - skin.css default style classes. Some of the custom style classes were used in the header.jsff file.

  When I deploy my portal webcenter application and custom for the header style classes does not load (even after refreshing the page).

  But if I go back to JDev and make a small change to the portal file - skin.css and save it, go back to the browser and refresh the page, then the style classes is loaded.

  One has faced such question? Please let me know if any difficulty / possible workaround.

  This seems odd. Rather than running, you can deploy the application on your integrated server wls and check once.

  Thank you

• globalization in a webcenter application

  Hello
  
  I'm trying to implement globalization in webcenter application.
  I followed this - http://technology.amis.nl/2012/08/11/supporting-multiple-languages-in-adf-applications-backed-by-resource-bundles-and-programmatically-controlling-the-jsf-locale/
  
  I am able to get the preferred language of the user in a bean (which is associated with language selection box)-
  
  {} public void handleLanguageSwitch (ValueChangeEvent valueChangeEvent)
  Language string = (String) valueChangeEvent.getNewValue ();
  System.out.println ("new language" + language);
  }
  
  < af:selectOneChoice autoSubmit = "true" value = "#{LocaleBean.language}" valueChangeListener = "#{LocaleBean.handleLanguageSwitch}" > "
  ...
  ...
  < / af:selectOneChoice >
  
  
  I also replaced viewhandler-
  
  public local calculateLocale (FacesContext context) {}
  String language = 'en ';
  new local language () return;
  }
  
  This method is called every time that the page refreshes.
  
  so first time I get the french page.
  
  
  now my question is whenever the user selects a different language in the selection box, this calculateLocale() method is not called?
  2nd, how can I get the selected language (which I have in my bean) here (calculateLocale() method)?
  
  kindly help.
  
  Thank you.

  Hello.

  Your problem:

  In your:

  public void handleLanguageSwitch(ValueChangeEvent valueChangeEvent) {
  String language = (String)valueChangeEvent.getNewValue();
  System.out.println("new language " + language);
  }
  

  It's only for a value change log. You set automatically the new value in

  value="#{LocaleBean.language}"
  

  Take the value in your calculateLocale get the new value to follow

  String newLocaleStr = ADFContext().getCurrent().getExpressionEvaluator().evaluate("#{LocaleBean.language}");
  return newLocale(newlLocaleStr);
  

  I usually implements solutions based in a base of aulieude file properties, xliff or java, because if you need to provide the new translation to Pages of Portal WebCenter and labels, then you can use OverrideResourceBundle which can be changed through "resource strings editor" component of Oracle composer or MDS download/load without redeployment.
  This solution based in a Phase ADF listener.
  In my blog, you have a solution based on it: http://www.danielmerchanoracle.blogspot.com.es/2011/09/multi-lenguaje-en-una-aplicacion-de.html
  However, in the solution is only based on the local bean (not the favorite browser locale or other ways to get the language, you must change the implementation if you want priority browser language)
  You need to remove the invalidation of the SiteStructure cache in the Phase ADF listener because it is problems with the navigation models in version WebCenter PS5.

  There are many ways to achieve your multilingual. I think it's to help you achieve your solution based on the AMIS Blog.

  Kind regards.

• I am trying to download office creative cloud Lightroom but Lightroom is missing from the list of applications I can download

  I am trying to download office creative cloud Lightroom but Lightroom is missing from the list of applications I can download

  Try your client application Adobe Creative cloud connection and then connect again and see if Lightroom will appear in the list.

• Application independent jar lib Skineditor ADF to a webcenter application

  I have a portal webcenter application one needs discovers level customizations.
  I went forward with developin skin using the Oracle Version 11.1.2.1.0 standalone skin editor in the goal. I tried this deployment as a shared library jar file.
  I added this to the webcenter application library.
  Now I don't know how to go further. How can I add this skin to the application? How can I integrate with the application. ?

  The following documentation will help you solve your problem.

  http://docs.Oracle.com/CD/E21764_01/user.1111/e21420/adfsg_apply.htm#BGBCDGGA

  (10.3 packaging ADF skin in an ADF JAR library to 10.4 applying ADF skin to your Web Application)

  Hope it works well for you case.

  Kind regards
  Hoque

• First and After Effects are absent from the Cloud Adobe Application Manager... Please help ASAP

  First and After Effects are absent from the Cloud Adobe Application Manager... Please help ASAP

  Short and accurate: if they don't appear, your system does not support them. Refer to the plug Tech on the product pages and make your choice...

  Mylenium

• Apps installed from the disc, but Application Manager shows them as not installed

  I have all the Creative Suite (master) applications installed from the disc, but Application Manager shows them as not installed. Why?

  Hi Dv8kiwi,

  I was able to recreate the behavior and am reported for designers of products, thanks for posting on the question.

  -Dave