Missing cmdlets in the reference Site Online 4.1

Can someone tell me why - http://www.vmware.com/support/developer/PowerCLI/PowerCLI41U1/html/index.html - online reference site shows all the cmdlets that I get when I use the help command in my shell PowerCLI?

For example, if I type 'eliminate' in my window Powercli, I return a list of "Remove Item" but the site above has not in his list. I would like to have a complete reference to understand all the controls and their uses.

I'd appreciate comments.

Hello, Alim786-

Well, there are things in PowerShell called PSSnapins.  These snap-ins each provide their own set of cmdlets.  The online reference site that you mentioned is for the PowerShell cmdlets provided by VMware via the PSSnapin PowerCLI (IE, "VMware.VimAutomation.Core").

The Remove-Item cmdlet is one of the cmdlets provided by the default PSSnapins that load with PowerShell.

To see only the cmdlets provided by the PSSnapin VMware.VimAutomation.Core, you can use the parameter - with Get-Command Module, such as:

Get-Command -Module VMware.VimAutomation.Core

This, you should get exactly the cmdlets that are included on the reference site online that allude you.  Who help me?

Tags: VMware

Similar Questions

  • With vSphere test/recovery replication all while keeping the main site online.

    Hi guys. niot sure if I'm missing something really obvious.

    From what I can understand tha base "recovery process" in vSphere Replication5.1 implies the following workflow

    However, our profession demands that we test the ability to recover the VMs selected the site of DR then than DO NOT impact main site.

    Is this possible without SRM / table to database replication / replication of VEEAM?

    Our installation program

    VCenter PROD (dedicated VLAN x)

    VR PROD device (including VLAN, dedicated)

    PROD-HA and DRS Cluster

    Guest PROD networking (VLAN z)

    DR VCenter (dedicated Vlan X)

    VR PROD device (including VLAN, dedicated)

    PROD-HA and DRS Cluster

    PROD comments Networking (VLAN, isolated, cannot drive to the main site)

    No RS and no possibility to use the replication table according to preverred, no Budget for VEEAM replciation.

    MUST BE DONE, while the primary site remains fully alive >

    Basic procedure to test recovery to DR and come back if I understand correctly >

    1 tasks replication setup (fact)

    2 access to the web in VCENTER DR > Pause/Stop replication on the virtual machines, we want to retrieve.

    3 web access in VCENTER DR > retrieve DR virtual machines using 'recover with the latest changes' (Show stop as primary/Source VM needs to go down)

    3 assuming that it is a path last step 3, we intend to move guests picked up at DR VLAN, one port groups and reconfigure the Ips using Powershell process mass

    4 active Directory and DNS will be changed to Dr. TEST Site to make usable salvaged customers.

    test to DR on revovered VMs in DR VLan 5 users, so this should be route back or affect the site of PROD.

    6 not recovered VMs to the main site. This required once more primal VMs being to low or EVEN be removed from the inventory!

    Procedure here

    VMware vSphere 5.1

    Looks like so there is no way to use vSphere replication to TEST the abilty to toggle, unless you can share the secrets with me.

    If you are using vSphere replication without SRM above it, recovery Test is not available. The process, you can follow in case you do not want your main Web site:

    (1) perform a recovery using the second option (retrieve by using the latest available data). In this way you will not have to power off of the VMs source and your main site will be online.

    (2) when the recovery is complete, stop the replications (which will be in a State of recovery)

    (3) power off VMs recovered, unsubscribe them inventory of VC, but keep the files of disk intact.

    (4) manually configure all repetitions using disks that have been left in the form of initial seeds. This will cause the changes to synchronize.

    In step 4 of ease, you can use the multi-vm replication configuration wizard vSphere. Just make sure that the data store target each disk that will be used as initial copy is put in the folder with the name of the virtual computer. Then, you could try to configure all virtual machines at once, performing the search of seeds and confirming to use.

  • Good overview pages in DW, but the CSS seems to be ignored on the Web site online

    It's very basic, but I can't understand it.  I'm the webmaster for a site with 15 pages very simple successor.   The site has some layout problems that correct, and I've rewritten pages containing more than one CSS based layout since I don't understand the original layout based on the tables (among other reasons).  I used the pre-fab DW twoColFixedLtHdr.css layout.  Re-written pages look good in the DW and look fine in Safari and Firefox. The pages looked like not good once I downloaded, so I replaced the pages with the originals.  It seems that the style sheet is ignored.  I changed the name of the CSS property to "newstylesheet" to get the letters and looked on all close but not is not the question.

    It is a sample page. http://living4zachary.org/whowearetestpage.html

    None of the CSS formatting is there, particularly the left side bar should have a black blackground and the main text should wrap around it since the sidebar is floated to the left.

    On the site of the host, all of the html pages are in a subdirectory called public_html. The newstylesheet.css file is a first level, just behind the main root.

    Here is the code, have been postponed in a temple, attach style sheet:

    "" < link href = "... / newstylesheet.css" rel = "stylesheet" type = "text/css" / >

    Here's the set up at the beginning of the sidebar code:

    < div class = "newstylesheet" id = "sidebar1″" > <!-InstanceBeginEditable name = "SidebarLinks"--> < a href = "index.html" > home < /a >

    < p > < a href = "aboutzac.html" > subject Zachary < /a > < /p >

    Who are we < /a > < /p >

    < p > < a href = "whatissca.html" > what is S.C.A. < /a > < /p >

    < p > < a href = "#" > how you can help! < /a > < /p >

    < p > < a href = "upcomingevents.html" > upcoming events ""

    < /a >

    < p > < a href = "oursponsors.html" > Our Sponsors < /a > < /p > ""

    < p > < a href = "contactus.html" > contact us < /a > < /p >

    < p > < / p > <!-end # sidebar1″->

    <! - InstanceEndEditable - > < / div >

    <!-end # sidebar1″->

    <! - InstanceEndEditable - > < / div >

    < div id = "mainContent" > <!-InstanceBeginEditable name = "MainContentArea"->

    I don't think that the problem is in this code, since DW is perfectly happy with it.  Somehow, the css is associated with the page on DW, but not on the server.

    This has really baffled me.  Can someone help me please?

    Here is a picture of the root directory on the server host, where you can see the newstylesheet.css and the public_html directory containing all the live pages and the whowearetestpage:

    http://65.60.9.34:2082/frontend/x3/filemanager/index.html?dirselect=homedir & domainselect l = iving4zachary.org & dir = % 2Fhome % 2Flivingz1 & showhidden = 1 #

    I do not see any image that you tried to understand, but I think you said that you planted the CSS out of the public folder html... try to move the css file in the public_html folder and change the url of your file to this location.  I don't know that the files on the client side can access outside of the folder public html files as server-side can... in fact, I hope that they cannot for security reasons.

  • Cannot download a Flash-Installer - missing page in the Adobe site.

    Just download the latest installers for Flash - 11.2.202.228

    But I also need the last UN Flash Installer for Windows but can not find the page to make it go away.

    Normally I'll here- http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html - but today I only have a ' 404 Not found '.

    I also ran a search for "uninstall flash" on the home page Adobe then tried his suggestions, but all pages with mentions of the uninstaller has just spent at the above address.

    Hoping this gets fixed quickly

  • HP Pavilion 15-ab027tx: the drivers are missing on the official site of HP

    Mr President.

    I tried to download the drivers for my laptop from hp official website. The drivers are missing from the Web site. Please publish the list of the required drivers and their respective links. My laptop model is HP Pavilion ab027tx 15.

    @Sai_Kiran4485

    Drivers, some user Guides and product information is down for the moment.

    HP has been notified and is working.

    Please check back later.

    Sorry for the inconvenience.

    REO

  • Can't play free online games on msn games. Put in safety for support; life private, blockers of pop-up ads disabled. deleted cookies; removed from msn as the reserved site, etc. Will not install the game

    I used to play Spades and backgammon on msngames (msn zone). It will not now allow the upcoming game.  Said... Oops; Failed to install.  Do things step 1,2,3, etc..  Have gone through all these steps.  Still nothing.  Someone can help me.  I have IE 9 regular and 64-bit.  I tried by both.  A message indicates the 64-bit could not be my default browser.  My computer is now set to medium, and msn is not a reserved site.  I have AVG and Spybot.  could it be prevent me to switch?  But I had the same problems with Euloge intermittingly (some days I could play, some days the same problem as now.)  This has happened for months.  I get on Pogo with no problem at all.  I like the msn site better and want to solve this problem.

    Hello

    Method 1 : perform the steps in the article and see if the problem is resolved or not.

    The problems of games online using Internet Explorer

    Method 2 : temporarily disable the antivirus software and see if the problem is solved or not.

    Disable the antivirus (Windows 7) software

    Note: Activate the anti-virus after the troubleshooting step.

    Hope that helps.

  • After a quick scan, my computer sent me a message that the space on my hard drive was missing and missing. He said to go online to learn how to recover

    my computer tells me that I must recover not accounted for space on my hard drive. as to my previous question on office starter 2010 parameter itself upward at this topic is own drive hard-'Q', when I downloaded the adobe flash player and activated, the 'Q' drive has disappeared, and office starter is still there, so this problem is solved.

    Content added from duplicate thread:

    message received after a quick scan - you have brought space missing on your hard drive. go online to find solutions

    Part 1 of the request: a few weeks ago, after a quick scan, I received this message, he was absent from my hard drive space and missing. How can I recover this please?

    Part 2 of the query: I recently down loaded to my e-mail, my RESUME, in the process of discovery, inadvertently, I had my own word processing (office 2010 starter). then I followed the steps to install this, and the software created a partition for itself. I mean, my computer shows now that I have 2 hard drives, the original 'C' drive and a new drive "Q". what I've done wrong? also, my mother, who also has family windows7 premium was not aware that she had a starter of office 2010, which she has, and she can't work out how to activate his either. Thank you.

    If your MOM PC shipped with Office Starter, type the word in the start menu > programs research and the text file box, which reveals the word shortcut, double-click the shortcut to start Word (or rt click on > PIN to the taskbar)

  • Cannot hear sound when it is online and when trying to install flash player then it show ATL file DLL missing, please reinstall the program

    Cannot hear sound when it is online and when trying to install flash player then it show ATL file DLL missing, please reinstall the program

    Hello

    We are pleased to hear that you were able to find a solution to the question and I thank you for the information provided. Do not hesitate to contact us, in the case where you face other problems in the future.

  • With the trial of 30 can days of dreamweaver I connect my site to my Web host? And I am able to see my site online?

    I have download the 30-tial for Dreamweaver. Then I connected my html site to my host via SFTP. But I can't see my site online. I wanted to know if I need the full version.

    Chances are you just uploaded in the wrong place on your server, or have something not set properly in your FTP settings.

    The 30 day trial is the full complete program just limited to 30 days of use of installation time.

  • Hello, so I bought the Photoshop app online for a year and I have to wait 24 hours before I can do the download? because when I click on download it brings me to the site of creative cloud... Thanks for your help!

    Hello, so I bought the Photoshop app online for a year and I have to wait 24 hours before I can do the download? because when I click on download it brings me to the site of creative cloud... Thanks for your help!

    Hello

    Please access the following link and download/install Adobe Creative Cloud App and sign in with your Adobe ID (email) under which you purchased Photoshop composition, go to the "' Apps'" tab at the top and start to install the products from there.

    Download Adobe Creative cloud apps | Free trial of Adobe Creative Cloud

    Thank you.

  • Why the Captcha module does not receive my site online?

    Hello

    I just published my site online.

    Evrething works fine except for the CAPTCHA module which blocks to send the contact form.

    I get a message saying that the CAPTCHA module can be used on BusinessCatalyst.

    How can I use it on my own server?

    Thank you

    Clemency

    You can't because your server is not the necessary logic. Incorporate the Google captcha code to the generic address if you use your own server.

    Mylenium

  • DW code does not match the site online code

    The image below is what is shown on the screen of my DW:

    dwcapture.png

    This next picture below is the same page as above, however it is displayed on real live site with a window "View source" from the browser:livecapture.png

    My question is why is this magic piece, highlight of the code continues to display on the site online, but not on my local version of DW.

    No matter how many times I 'get' or 'put', this piece random information between the three links and the table remains just on the live version, but never on the local.

    I even changed table information and link, which are "placed" and displayed correctly.

    I am quite confused, please help if you can?

    My guess without seeing the page online is that you have several files - maybe one is capitalized and the other is the lowercase file name?

    If this isn't the case, 2 folders, I lean toward possible code errors.

    The W3C Markup Validation Service

    Nancy O.

  • Get a site online Adobe Muse. The site is one of the five that come with the package?

    Get a site online Adobe Muse. The site is one of the five that come with the package?

    The portal you are looking for is "the free partner portal" link: http://www.businesscatalyst.com/Admin/Index.aspx?to=PartnerPortal , where all sites are listed. However, specifically for free creative cloud sites, you delete the site via the site management option in the administration.

  • Right now I'm working in a temporary site format. I'm hosting the site on my own computer. How to consider a temporary site to site online? What I need to improve my in-home service and it cost more per month?

    Right now I'm working in a temporary site format. I'm hosting the site on my own computer. How to consider a temporary site to site online? What I need to improve my in-home service and it cost more per month?

    Hi Traci,

    To push the live site, you will need to:

    1. Publish a site to BC (menu file > publish)
    2. Then go in your site admin control panel and the launch of the live site to pay or to redeem a free site.
    3. Add the domain to the site
    4. Change to the Registrar of domain name servers

    For steps 3 and 4, please see the following link:

    http://docs.BusinessCatalyst.com/user-manual#! / site-settings/site-areas/change-the-d n-name-of-your-website

    The following link may also be useful:

    Launch of a Muse Site | Adobe Muse CC

    Kind regards

    Sonam

  • Review of muse pages off connection and uploading to the site online at Business Catalyst

    I'm about to do my Muse live site Web Business Catalyst.  However, I know that I will eventually have to revise existing pages - the addition of a few new features and also a couple of external links. I would feel more at ease to revise the entire site offline and download my entire revised site in lieu of catalyst for the company.  I don't see any instructions or info as to whether this is possible. Advice please.

    You can edit/change the contents of the site and then download BC, when downloading in BC, you can use the existing site, if you have already published the site or you can go with a new site of the trial.

    If you are referring to the replacement of any site in British Colombia, new content then the same process of updating the site will work. I'm missing something or you are looking for something else, then please correct me.

    Thank you

    Sanjit

Maybe you are looking for

  • Why don't you add Persian language of devices?

    Persian is an ancient language in the world.the Persian is the official language of the 3 countries and his 13th of the websites.persian is the language of the poem and the peace. I want to know why you don't add on your devices? Therefore, your devi

  • Windows Update does not load: Windows XP

    RSVP-URGENT! My primary default browser is NOT IE, but I have to use to try to get the UPDATES before it's end of life on October 16, 2014. Please confirm. I want to run all Windows updates on it that I can, but now when I try to do with IE, it "cann

  • Question installation Lexmark 8350 on Windows 7

    I am running windows 7 and have a Lexmark 8350 all in one inkjet connected to my laptop. A week or two there is the printer stops working and the cause seems to be the sudden absence of a driver. I tried to reinstall the lexmark printer driver I down

  • HP 6515

    I have a new HP cartridges in my 6515. The black cartridge will not print. The alignment will fail. Only of blue ink will be printed on the alignment page. All other cartridges work. I have a cartridge 564XL black and color cartridges 564.

  • Numbers SMS blackBerry 7130v Smartphone displays only not as names?

    Not sure if it's just me, or maybe newer phones don't do this (I ' upgraded' from the old model of style) but in my message, my outgoing msgs Bank, view the name of the person in my contacts, but their response always comes as their number.  This is