Missing folder then drag and drop on the OBIEE catalog view

Similar Questions

• Drag and drop from the tree to datagrid does not

  Hello
  I'm looking for a very simple setup drag and drop from the tree to datagrid and I see a weird behavior... when I drag a node of the tree to the datagrid... It is added to the DataGrid, but gets also reproduced in the tree of the source (except the first moved node)
  Here is the link where you can see what is happening
  Link to the sample application
  View source is enabled then please take a look and let me know what I am doing wrong
  
  Thank you

  "adeelmahmood" wrote in message
  News:g81gjh$FEC$1@forums. Macromedia.com...
  > Hi there
  > I'm trying a very simple setup drag and drop from the tree to datagrid
  > and I
  > see weird behavior... when I drag a node of the tree for the
  > datagrid
  > .. It is added to the DataGrid, but gets also reproduced in the source
  > tree
  > (except the first moved node)
  > Here is the link where you can see what is happening
  > http://mankatomoose.org/temp/treedragtest/TreeDragTest.html
  > View source is enabled then please take a look and let me know what I am
  > making
  > evil

  The source for an XMLListCollection is an XMLList. The XMLListCollection is
  a _view_ of the XMLList and has no existence apart from him. The XMLList
  its source is always an integral part of the original XML. Then, when you
  Add a node to the XMLList which is the source for your DataGrid, you also add
  it to 'something' in the original XML document. I think that you either need to make a
  copy of the knot or just look at filtering the XMLListCollection. Peter
  ENT it manages in this example by making a copy (ish)
  http://weblogs.Macromedia.com/pent/archives/2006/11/tree_drag_and_d_1.html.

  HTH;

  Amy

• 3.6.3, cannot drag and drop tabs (the iconic chart moves but disappears when released), also can not 'tab.

  3.6.3, I can not drag and drop tabs (the iconic chart moves but disappears when released), also I can not "select" tab to change the status of parent/child etc.

  This has happened

  Each time Firefox opened

  == installation

  Hello

  I had the same problem (impossible to drag-and - drop) and it was restored when I disabled the addon "tab mix more.

• in any case to allow drag and drop on the BACK window?

  How to enable drag and drop on the BACK window?
  THX

  Hi fs - ab,

  You can use 3rd party tools that replace or enhance the Explorer.

  FileMenu Tools - free - adds many functions
  http://www.LopeSoft.com/en/fmtools/info.html

  I hope this helps.

• cannot drag and drop into the chat

  I had used for a long time a very old version of Skype (3.8) without problem. Recently I have updated to the latest version, and now, I can't drag and drop files in a chat window. I still can select Conversation-Send-file, select a file and send it, but I can't drag and drop. I use XP 32 bit. Any suggestions?

  Reinstall the program did not help.

  > Remove Skype shortcut on the desktop. Then go to the Skype folder inside the program files and access the phone folder and delete Skype.exe.
  
  > Now to reinstall Skype using this full installer.
  
  > http://www.skype.com/go/getskype-full
  
  Thanks, but that no longer works.

• Prelude, drag and drop from the Finder

  Would be nice if we had the ability to simply drag and drop a file in the dialog box to ingest finder to automatically point to this folder.

  Most mac programs have this feature, but I do not see it in the prelude.

  This would save a lot of time since the workflow that some of us uses have subdirectories after subdirectories which end up hold our images.

  Thoughts?

  Hi Openskies,

  Thanks for the suggestion and raise doubts.

  If I understand correctly, you are browsing the necessary files/folders with finder and then I want to drag-drop to Ingest window and check the files in the capture Panel.

  The same browsing experience is available in the window to ingest itself on the left side. You can browse all the files on your Mac with this and check files for ingest Ingesting/biased.

  

  Although it will be interesting to see the folders being directly drag after search in the Finder, but overall, it would be more or less even if the navigation is to ingest.

  Again, if you feel strongly about this, please fill the following form with precision:

  Feature request/Bug Report Form

  We would like to improve customer experience with Prelude by incorporating the suggestions, ideas and comments.

  I hope it helps. Continue to write in the case of any confusion.

  Thank you

  Mayjain

• Cannot drag and drop into the bar of pages in Acrobat Pro XI for Mac?

  MAC OSX 10.7.5

  Acrobat Pro XI

  In adobe Acrobat XI for Mac, how do I drag the pages of thumbnails of Pages box in the finder and make a new PDF?

  In windows I can simply select the pages, drag and drop them in Solution Explorer and creates a new PDF pages that I dragged.  I've tried everything on my Mac and I can't extract this way.

  It is extremely slow and frustrating to have to manually right click Extract, select pages, open in a new window from adobe, and then save the file in the menu.

  On windows, I just select the page, drag to the folder and click Rename.

  The same question and found the solution, the wire https://forums.adobe.com/thread/1348512 try67in response

  To zoom back, so that the entire page is visible, then drag & drop works fine, well, at least, it worked fine with me.

  I admit, it is odd though.

  =

• Drag-and - drop off the stage

  Hello

  I developed a simple drag and drop learning object, which works exactly as I intend also except for a small problem.

  I have a selection of labels and each has its own variables X and Y; now, when I drag a label if I hit the target, then it fell into place and if I miss my target, he called the variable number for X and Y of the MovieClip and it snaps back on its original coordinates - great.

  The problem I have found is when I drag the label now my left hand mouse button to the edge of my scene, as my mouse cursor holding the passes of the label of within the scene for out I lose my hand icon and the label is in limbo until I bring it in the scene but then I have to drop the label inside the scene and the variable X and There no longer holds the original coordinates of MovieClip, but is crushed it seems the new coordinates near the edge of the stage, so the snap going back at the edge of the stage and not there where it belongs.

  I went in the way of the creation of a rectangle, obliged to keep the label within the scene but I've hit the limit he unfortunatley serves pretty much the same way when I drag off stage.

  I understand that AS3 is tuned a MOUSE event and that he can't listen to when the cursor is outside the scene; I came across the function MOUSE LEAVE would that work? Basically I want my code to detect when the MovieClip was dragged out of the scene and automatically deliver it to the coordinates that is held within the variables X and Y and trailing stop leaving the user to try again.

  Any help would be great guys, thanks a lot.

  First of all, I would not attribute this listener until the movement was initiated, it would disappear after you stop dragging.

  Second, your conditions in your if() statement can never be met.  You want to use. instead of &.

• I can't make screenshot o do drag and drop on the desktop

  Hi all

  When I do a screenshot (entire window or a selection) I do not see the genereated .png image, but it plays the sound "trigger". If I drag and drop a file on the desktop, the file is not visible.

  If I alt + right click on station Home/Finder icon and re - open Finder, files are visible.

  I tried to remove the com.apple.finder.plist and other files, as illustrated in a tutorial, but after some time of work, it brokes again.

  On the console there are no significant errors.

  Any help is appreciated. Thank you.

  If I understand your description of the problem, no files at all are visible on the desktop. You restart the Finder and the files reappear, but then at some point, they disappear again. Is this correct?

• Windows XP SP3: Unable to start, System Restore cannot drag and drop ALL the files/folders on the desktop and applications, many unable to start, services cannot search, cannot copy or transfer the any files folders...

  After a recent power outage, my system has restarted with a weird and very common Windows problems range. The system boots fine, all my personal files/folders/apps are intact, have suddenly stopped almost all functions of applications, but many crucial functions of the Windows kernel. Everything seems to point to several Windows Services are unable to start (administrative tools on the start menu). I am running Win XP SP3 and that he was going to upgrade to Windows 7, but I wanted to backup everything in advance. As I have 29 000 hours on my C: drive and a lot of time invested in my system, files, and applications, I am extremely reluctant to risk losing my files and applications by performing any type of reinstalling Windows. Strangely, begin to almost all my apps and all my files are accessible for the most part, but I've lost the ability to drag and drop files, folders or items in a list within the applications COMPLETELY. I can't copy or paste anything, can't move the desktop icons (although I can create new files and folders). So at the moment I can't save anything or even a single file transfer to a hard drive on another storage medium. Immediate reaction: try safe mode and try the system restore safe mode has the same problems (likely due to the large number of system services that inexplicably refuses to start) and the system restore says an error window saying "system restore is not able to protect your computer at this time. try restoring the system running and restart again", which of course NEVER changes. It's the equivalent of getting a tire on your car in the middle of nowhere to find the spare tire flat and the missing Jack. I have used to be fanatical about the definition of the regular restore points, but now can not access them. I have backups of most of my personal files, but over years have lost most of the original installation CD for many of my applications (there are over 100 applications on my system) and I don't want to lose the file associations and architecture of directory tree that it took my so long to implement. I started with Win XP media center edition of first (circa 2004 or almost) and have migrated twice more of 3 hard disks and 2 computers. All this time (5 years of daily use), I have NEVER known so many malfunctions for as many Windows basic and vital functions at the same time. I tried a lot of 3rd party "windows fix - it / registry repair" apps, all have no effect. Everything I can speculate is there was some serious damage to the registry and have no idea how/why so many Services refuse to start. In MMC, more than half of the services actually start and run, the rest all give the error message "the service or dependencies is not start (error 1068).» In addition, very oddly, no. APPS or windows appear in the toolbar AT ALL, but the Quick Launch toolbar works very well, just like the tray button and start tasks (?! )!). If I reduce a window, it "disappears" (Nothing on the task bar), but I can restore it using the alt - tab keyboard shortcut to switch apps, so all applications/windows appear on the list of the Task Manager. A few apps is paralyzed bad, as the player windows media, itunes, etc. (I guess because the service windows audio can not not start), some won't start at all, but 90% of them work fine, except to try to copy or back up all files. I can create new files, however. I'm desperate to find a solution to repair XP3 Win WITHOUT losing my installed applications and files, before I try and switch to WIndows 7. Any help/suggestions/links/advice would be much appreciated. I'm an experienced user, but I've never met so many malfunctions based on the OS at a time. I, however, very painfully learned (years before that my system so complex) it's been almost a re-installation of Windows guarantees to lose my installed apps and files, the directory tree architecture associations.

  Help, please!

  I'll be honest with you - your message is so difficult to read that I don't bother to go through all that. Next time consider using white space, ball or points numbered, etc. to make your message more readable. I stopped reading after your first sentence and only scanned the rest quickly. I do not mean to hurt your feelings; just trying to help you get targeted answers you need for the future.

  The blackout has corrupted your Windows installation. Back up your data now. Since you have problems so much, it would be probably best is to remove the hard drive, put it in a USB drive enclosure and attach it to another computer to copy the data OR start the target with Linux Livecd such as Knoppix system and copy the data to an external hard drive. IOW, do not use the damaged windows to try to get your data.

  You can try a repair that will leave your programs and facility data intact, but with this widespread bribery, it is unlikely to work. However, it takes only a few minutes and is so worth a try. If the repair facility does not work there is nothing to do, but a clean install. And Yes, it will mean that over again.

  Consider buying a UPS to help prevent future damage by power outages. For a single computer, you should look for one in the area of $60 to 80. A more expensive UPS is not necessary. Another good disaster recovery strategy is to buy an external hard drive and Acronis True Image. You can image your system (and can make an incremental backup image so that your image is still current). You can apply your image and be back running that you were in relatively few minutes after a hard drive or Windows to fail.

  http://www.michaelstevenstech.com/XPrepairinstall.htm - repair install how-to
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - you will need at hand MS - MVP - Elephant Boy computers - Don ' t Panic!

• Drag and drop into the Source monitor but not Double click!

  Has anyone seen this problem?  I have a plugin from the importer.  If you drag and drop an element in the source monitor, then it works fine.  But if you double click it nothing happens.  No idea why this would happen?  Regular pliers (like MOV files) work fine then there must be something wrong with my plugin.

  Thank you!

  Thanks Steve!  For someone else with the same question, the real culprit was setupOnDblClk.

• Drag and drop into the structure of recursive tree using af: tree

  I use version 11.1.1.2.0 jdeveloper.
  
  I have a table of the following structure:
  
  groupVO.

  id   name    parent_id
  1   group1   -1
  2   group2   -1
  3   subgp1    1
  4   subgp2    1
  5   leaf1        3
  6   leaf2        4
  7   leaf3        3

  To implement this as a tree, I created a static vo, RootVO, with a row (root-1).
  This is defined as the parent of groupVO using a link from the view.
  Then, I created a viewlink groupVO to himself.
  Then, I created an af:tree with these your. The tree looks like this:
  

  Root
       ->group1
                    ->subgp1
                                 ->leaf1
                                 ->leaf3
                    ->subgp2
                                 ->leaf2
       ->group2

  Now how can I implement drag and drop in this case?
  What I have to do in drag - move, it's just update the component parent_id enjoy the ID of the node dropsite.
  
  Also, I need to display the details of the node selected in a form. I found that by dragging the child vo does not have the trick here. It shows only the first child node of the table.
  
  Published by: josetuttu on July 17, 2011 23:23

  Hello

  I have a similar case (non recursive tree) described here.

  http://www.gabrielsideras.com/2010/10/23/ADF-drag-and-drop-functionality-in-an-aftree-component/

  To implement the move I use model method instead of a method to support bean.

  Gabriel.

• Drag and Drop in the Organizer

  I'm new to first and try to add data to an existing project. It seems that I should be able to do it from the Organizer. From what I've read, I should be able to simply drag and drop media within the organizer for the creative project. However when I drag any media over any project a circle with a cross through it appears saying I can't. -Isn't it possible from the Organizer?

  You are probably falling media in the wrong place at the meadow. You must drag the media organizer, in Meadow (Project-> Media) Media Panel, first.

  Then, you can use the pre-bracket.

  Another way is right click of your media in the Organizer, and select 'Edit with Premiere Elements', this will import the media in pre and also add it to the last of the timeline.

• Drag and drop on the Table except MDS logs

  Using JDeveloper 11.1.1.3.0
  
  Scenario:
  
  I have two tables and me it is implemented the drag-and-drop functionality based on this document:
  
  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/60-table-drag-n-drop-sample-176981.PDF
  
  Before implementation, I was able to make a selection - multiple lines and move using actionListener on a button and dragging selected keys programmatically. Slide it / move is more than an additional feature, but I noticed how after the implementation of the operation drag / move, I've been doing exception in my journal.
  
  < MDSDocumentChangeManager > < getDocument > ADFv: difficulties to obtain the final record of MDS. oracle.mds.exception.ReadOnlyStoreException: MDS-01273: operation failed on the resource /pages/MyPageFragment.jsff because the source metadata store mapped to namespace / DEFAULT is read only...
  
  My project is not configured to use MDS and MDS defined in my config-adf. This means that using drag / move requires the configuration of MDS or is there something that I missed it to ensure that I do not get this error on my journal.
  
  Thank you.
  
  -Marvin

  Hello

  no drag-and - déposer not require MDS. Even with active MDS should not cause a problem.

  Frank

• Drag And Drop - check the correct answers

  I've been playing with this code and need a bit of help!

  I'm after finding that drag and drops are correct, so I can score accordingly rather than simply having a single throughout the score. I need to know if the circle was successfully deleted or the square etc. Ideally, I would like to have this interaction as a command on a button, but my AS3 is let me down!

  Any help would be appreciated.

  Mike

  var score:Number = 0;
  var startX:Number;
  var startY:Number;
  var startLineX:Number;
  var startLineY:Number;
  //-----------------------------
  setup(circleMc);
  setup(squreMc);
  setup(errowMc);
  setup(polygonMc);
  
  
  //add function for submitBtn button
  submitBtn.addEventListener(MouseEvent.MOUSE_DOWN, checkScore);
  //function for checking whats right and wrong
  function checkScore():void {
       //
  }
  
  
  function setup(shape:MovieClip):void {
       shape.addEventListener(MouseEvent.MOUSE_DOWN, dragThis);
       shape.addEventListener(MouseEvent.MOUSE_UP, dropThis);
       shape.addChildAt(new Sprite(), 1);
       shape.startX = shape.x;
       shape.startY = shape.y;
       shape.mouseChildren = false;
  }
  function dragThis(event:MouseEvent):void {
       event.target.startDrag(true);
       stage.addEventListener(MouseEvent.MOUSE_MOVE, onMove);
  }
  function onMove(m:MouseEvent):void {
       drawLine(MovieClip(m.target));
  }
  function drawLine(item:MovieClip):void {
       var line:Sprite = Sprite(item.getChildAt(1));
       var localStart:Point = item.globalToLocal(new Point(item.startX, item.startY));
       var localItem:Point = line.globalToLocal(new Point(item.x, item.y));
       with (line.graphics) {
            clear();
            moveTo(localStart.x, localStart.y);
            lineStyle(2, 0);
            lineTo(localItem.x, localItem.y);
       }
  }
  
  function dropThis(event:MouseEvent):void {
       //stop dragging
       event.target.stopDrag();
       //stop drawing the line
       stage.removeEventListener(MouseEvent.MOUSE_MOVE, onMove);
       //the target MC is named the same as the drag object with the addition of the below prefix
       var myTargetName:String = "target_" + event.target.name;
       //get dragged object name
       var myTarget:DisplayObject = getChildByName(myTargetName);
       //if you've done it right
       if (event.target.dropTarget != null && event.target.dropTarget.parent == myTarget) {
            event.target.removeEventListener(MouseEvent.MOUSE_DOWN, dragThis);
            event.target.removeEventListener(MouseEvent.MOUSE_DOWN, dropThis);
            event.target.buttonMode = false;
            event.target.x = myTarget.x;
            event.target.y = myTarget.y;
       } else {
            //change result text
            resultTxt.text = "Try Again !";
            //these two command below put the object back where it started at
            event.target.x = event.target.startX;
            event.target.y = event.target.startY;
            //remove line
            event.target.getChildAt(1).graphics.clear();
       }
  }
  
  
  circleMc.buttonMode = true;
  squreMc.buttonMode = true;
  errowMc.buttonMode = true;
  polygonMc.buttonMode = true;
  

  Everything that happens this condition will have been placed correctly.

  If (event.target.dropTarget! = null & event.target.dropTarget.pa...)

  So everything you really need to do is assign a variable for this object that indicates it is properly placed.  If these are the MovieClip objects, you can assign this variable dynamically, so in the following code the test condition you could set event.target.placedCorrectly = true; (or something similar).  Then later you can loop through and see objects have the placeCorrectly value assigned as true.

  One thing that you may have to attend is to use currentTarget instead of the target.  target can point to any object in the object that has the assigned listener.  currentTarget pointing to the object that has the assigned listener.