__missing updates___

Similar Questions

• How can I install the new updates___

  I have Vista 64-bit with Service Pack 2 is already installed, but am unable to install the new updates re: windows or office. One of the errors is '80070641'. I followed the instructions from Microsoft re: unable to install and read some of the forums found in the search engines which lead me to believe that my window Setup is corrupted or missing something. I went through this with HP as it was impossible to install updates also. I have a DVD of the operating system, but do not know how to use if appropriate. Give me options. If I need to recharge, can I just the installer? Should I save all my files first? Charleei

  Maybe this article will help you. Use the option "fix it for me":
  http://support.Microsoft.com/kb/971058

  t-4-2

• __Missing tab sharing on C:properties / sharing and securities with win xp sp3 windows Explorer

  I am networking two xp with a model of wind 7 comps.  The comp. xp is missing on the c:properties the sharing tab / sharing and stock selection.  I can not access this comp. on the network.  I get a message that the comp. is is not available... The other XP has the tab and I set up the sharing with everyone on my computer of wind 7 and I can see it under permissions.  Both xp have sp3 with all updates.
  Help!

  You run Acronis?  I read that this often causes the error "not enough storage space" when you try to share files.

• Error in C:\Windows\system32\nvsvc.dll __Missing entry: nvsvcStart

  Starting Windows, the error message above is displayed.

  I tried the update of Windows and the DVD player, but the disc will not play DVD etc.

  Anyone know how I can fix this please?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  Special attention to the DVD driver and get the most recent available even if it shows that it is already in good shape.  If you need to get pilots to leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• I tried to download an Album of music on vUtiliser but when I tried to re - start to downloading says that some data is __missing, how can I change this and change something to allow it to download correctly?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages on a music download on vUtiliser album.
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I have not disclosed any personal info.

  I need help to download some files that say data missing so cannot download.

  His music on vUtiliser file.

  Oh SOD off the POWER, THEN, wake up! YOU BASTARDS!

• error code 80072EFE appers when I try to download and install updates___

  error code 80072EFE appers when I try to download and install updates

  Hello

  This rootkit has been known to cause this problem.

  TDsskiller (Rootkit removal tool)
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Then, restart and check the updates.

  To search for other malware use this online scanner:

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  ==================================================================

  If necessary:

  Run 1 SFC

  Start - type this in the search box-> find CMD at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  ------------------------------------------------------

  Then check out this article:

  You may experience some temporary connection errors when you use Windows Update or Microsoft
  Update to install updates<-- check this="">
  http://support.Microsoft.com/kb/836941

  Do these two and try updates

  Description of the update tool of the system for Windows Vista, Windows Server 2008, for Windows
  Server 2008 R2 Release Candidate for Windows 7 Release Candidate
  http://support.Microsoft.com/kb/947821/

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  =============================================

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• error 800b0001__windows cannot get updates___

  verified history updated...

  you have not tried to install updates for your computer

  check the installed updates...

  no update is installed on your computer

  : have had windows vista for a few years

  Since always on the automatic update

  always installed other updates if necessary

  now get this error 800 b 0001

  have you tried many solutions on the net without success

  can you help me?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://support.Microsoft.com/kb/958045

  Error code when you try to use Windows Update or Microsoft Update to install updates: "0x800B0001.

  If the doesnot above help, repost in the appropriate Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Error in C:\\Windows\system32\spool\DRIVERS\W32X36\3\LXCFtime.dll __Missing entryRunDLL entry

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: How to fix the error in C

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://www.Vistax64.com/Vista-hardware-devices/120061-missing-entry-rundllentry.html

  It is a Lexmark printer driver problem.

  Read the info on the link above.

  If this does not it, contact Lexmark.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And use this program to see what boots at startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner