Mobility Group - without layer 3 roaming
Hi all
With a N + 1 WLC deployment, is it possible to disable the layer 3 roaming while allowing the Group feature of mobility on the backup controller?
based on the configuration of the network, layer 3 mobility is not necessary. However, we need two controllers to exchange all the parameters so that excluded customer info etc. will be synchronized during a failover security scenario.
I don't want to use ACL as such.
Thoughts appreciated.
see you soon,
Andrée
Andrée,
Looks like there's nothing for you to do. Let me clarify my thoughts, so can you tell me if I saw correctly your concern:
-If the buildings are separated, the case where a laptop can move from the field of application of 1 to cover other WLC WLC will never happen right? And if this does not occur, layer 3 roaming never happen either.
-If no layer 3 roaming happens, no additional charge affects the WLC.
Nicolas
===
Remember responses of the rate that you find useful
Tags: Cisco Wireless
Similar Questions
-
2 5508 a mobility-group autonomous migration
Hey everybody,
for some reason, our wlan controllers were built up to be independent instead of beeing a mobility group.
I would like to change that in order to be able to use all the features of the AH.
Let me describe our scenario:
two WLCs 5508 running SW worm. 6
-same subnet
-the two are running in mode master controller
-different host names, ip addresses, etc.
-all settings for the local wireless networks and AP-groups (except the APs themselves to these groups) are the same
-altogether now, we manage approximately 100 configured on WLC #1 half rounds, the other half on WLC #2
I don't know exactly why, but when that adjustment has been installed, someone already configuredHA for each access point...
for example:
-AP #1 WLC #1 WLC #2 secondary primary
-AP #2 WLC #2 WLC #1 secondary primary
but without WLC #2 configuration for AP #1 knowing that it would be foolish, correct?
so my question is: How can I do the migration under the best conditions?
is it easy as:
-disable the master controller on WLC #2 mode
-Configure the two WLCs in one group of mobility
--> WLCs negotiate their configurations for the APs
and everything is fine after that?
Comments appriciated. ;-)
rgeards, Manuel
First OFF... master controller mode. Then veriftywhat ap should serve as wlc #1 as the principal and wlc #2 of high school. Configure the belgo-chinois mobility to have the other wlc and ensure that relief ap is activated.
-
How to duplicate layers & groups without automatically add a "copy", "copy 1", "# copy" at the end of the new group.
He has been harassing me for a while now, since I often work with the same elements over and over again. His frustration of having to change the name of each layer manually, especially if I copy an entire group.
Is there a setting in Photoshop or maybe an external script that can help solve this problem for me?
See you soon,.
Qiming
You can go to the Forum script:
-
I have a distribution list large email I want to create, BUT I don't necessarily want to put in my Contacts and all this My Contact list of people synchronized upward with my iPhone. Can I create a group without their input in my Contacts?
You can create another account on your mac.
You can open an account with mailchimp.
There may be a limit on the number of emails you can send per day. No idea about the number, but I've heard as low as 200 per day.
R
-
Copy configuration WLC wlc next in the same mobility group
Hello
We have a 4400 WLAN operational controller. We intend to deploy a new controller in the same mobility group.
How do we configure the second WLC? From scratch, or we could for example use backup configuration of the first WLC (just to change the address-ip/hostname etc.)?
ARO
Mikko
Or the other works, but remember that reproduction should be the new controller to be off the grid to avoid intellectual property conflicts. I like to build from scratch, and then to ensure that the same configuration settings, use WCS to push models. Local on controllers do is ok, if you only have a few, but if you have more that 5-10 you will find keeping all the controllers of the same becomes a management nightmare.
-
How to make my site in a mobile site without doing it all again
How to make my site in a mobile site without doing it all again? Please fern
Hey fern,
Currently, it is the only way to do so.
-
Does anyone know a way to apply an object style to a group without changing the style of the subject of the articles within the Group?
Well, as far as I know, there no way to do it. Apply an object style to a group applies this style to all elements within the group as well. So, I resorted to writing a script for this.
-
How can I publish my mobile site without replacing office (index.html)?
I try to publish the mobile Web on my server and replace index.html, how do I publish my mobile site without replacing my Muse C6 adobe index.html
Thnaks
Manual
Phone version would include its own homepage index page, if you are referring to load the site with your own index page, you can download from the site to a subfolder and then bind the pages.
Thank you
Sanjit
-
by choosing layer in a group (without right click list)
in the same way, a layer that is not in a group can be selected by the command by clicking an object with the tool top move, a layer within a group can be selected? Move tool command by clicking an object on a layer within a group to select the group, rather than the layer.
Is it possible to select a layer group by clicking its posted content? Thank you
Change the selection option automatic move (in the options bar) of the group to the layer tool.
-
Is it possible, in messages, the rotation of notifications for specific people or groups of discussion, without disabling notifications for all incoming messages? I sometimes have a lot of messages from my daughter and my phone buzzes away all the time which can be annoying. I don't want to disable notifications entirely or do it on the silence on the other I miss important messages form other people.
You can enable do not disturb on an individual message, but which will shut down the entire conversation if it's a group. This is not the same as activation do not disturb for the phone, which disables all notifications. Open messages, select the message in question, in the upper right, click details and then scroll to the bottom, you should find the switch to do not disturb.
-
Send an e-mail to groups without address visible to everyone
I would like help on emailing a group of people without address of any person showing an email of individuals. I hope I made sense in typing this? Thanks for the help!
Sure thing, the best way to do this is to use the "blind carbon copy" Bcc field in your e-mail program. Sometimes you have to click on 'more' or an option on toolbar to activate the box to see BBC, then type your addresses (variable program).
-
BI Publisher RTF model - fill a cell with a group without line breaks for each element
I have a fairly rigid rtf model with multiple cells. A cell in particular just display a value of a single group.
I want to display all the values of group in the cell, but instead of display each value on a new line of the
cell and cell resizing, I need a way to repeat the values (we hope) without resizing the cell.
Thus, for example, given a simple group such as < GROUP > < VALUE > where the GROUP contains the VALUES 1, 2, 3, 4 and 5.
a normal <?-foreach: GROUP? > <? VALUE? > <? end foreach? > product
CELL OUTPUT: 1
2
3
4
5
What I would like is to be able to output the following (assume the slot size cell is not resized one appears exactly as it does in the rtf)
CELL OUTPUT: 1 2 3
4 5
The tricky part is that I'd love to be able to have the text wrapping, once he arrives at the edge of the cell. Is there a simple way to do this?
After a search in a dozen of nets beforehand of course, I find the answer, about 10 minutes after the announcement.
Knew it was something simple!
-
synchronize with mobile lightroom without internet or cloud
I wonder if you can help in this case
I am now at the Kenya with a very low internet connection and I want to transfer my photos from 3000 to my mobile from lightroom catalog so that I can do the filtering, flags aside when I'm on my way back to my home to plane
is there a way to do without an internet connection? for example, I transfer the photos directly ipad then import them from lightroom on mobile or this way, that it will not sync with my existing catalog?
Lightroom mobile smart sync only preview of your photos
So once you have pictures (Collections) sync in Lightroom on your desktop
The next time you open Lightroom on your mobile devices with an internet connection
You will see your Collections to start the synchronization
You can ask for a report here
Feature request/Bug Report Form
Hope this helps
Thank you
-
Make a group without selection of all paths
I'm working on a script that will take each pathItem in a document and put it in a group (all pathItems in the document are groupless opening, so there won't be other groups already in the document).
I have a script that creates a group, and then puts the highest pathItem placed in the group. I just can't figure out how to retrieve all the pathitems in the document, or the same action in a loop until everything is in a single group. The kicker is, as the title suggests this script should work without selecting anything first hand (in other words, after click on an item to select). Now, if there was a way to select all elements with a script that would be great.
Here's what I have so far:
#target Illustrator //based on script from Carlos Canto var doc = app.activeDocument if ( app.documents.length > 0 ) { doc = app.activeDocument; newGroupItem = doc.activeLayer.groupItems.add(); } var gi = doc.groupItems[0]; // the topmost existing group var all = doc.pathItems[0]; // all paths in document all.move (gi, ElementPlacement.PLACEATBEGINNING); // move selected path inside the group all.evenodd = true; // necessary to determine "insideness" or to make holes.
I also have what I found here on the forum
#target Illustrator // GroupFromSel.jsx // regards pixxxelschubser if ( app.documents.length > 0 && app.activeDocument.selection.length > 0) { var aDoc = app.activeDocument; var Sel = aDoc.selection; var GroupFromSel = aDoc.groupItems.add(); for ( i = Sel.length-1; i >= 0; i--) { Sel[i].moveToBeginning( GroupFromSel ) } }
But alas, you select so two scripts, two solutions possible. I'm just working on both until I can get one to work.
Any ideas?
var all = doc.pathItems[0]; // all paths in document
It's only the highest pathItem, that to change
var all = doc.pathItems; // all paths in document
.. .and loop thru 'all' and move each within your group
#target Illustrator //based on script from Carlos Canto if ( app.documents.length > 0 ) { doc = app.activeDocument; var gi = doc.activeLayer.groupItems.add(); var all = doc.pathItems; // all paths in document for (i=0; i
for this configuration, we will run trouble if you have other groups with pathItems
-
elements mobile with a layer - option 'free transform' in Photoshop Elements 7
Hello
I hope someone can help out and answer my questions. Thank you.
Description of the task:
I want to create a tool that is able to visualize the position of the pieces on a game board. Right now I use Photoshop Elements 7.
I think the following would be appropriate:
2 layers, the base layer would show the game board and the pictures of the parts would be on the second layer. If I try to do with Photoshop Elements 7 then every time when I insert an image of a coin, a new layer is created. I don't need a layer according to the schema. Yes, we could reduce a layer afterwards. But it is not so comfortable in this way.
In addition, the pictures of the parts must be mobile on the game board. There is the 'free transform' option in Photoshop Elements 7, but only one single element (one piece) is mobile thereafter. All the inserted elements should be mobile.
So my question: is - this doable in Photoshop Elements 7? If this is not the case, what version of Photoshop Elements would be appropriate or what software do I need?
Select a layer in the layer stack, and then select the move tool from the upper part of the tool palette. You can then drag the room around and use the handles of the bounding box to wide angle. Hold down the SHIFT key to keep the proportions.
Maybe you are looking for
-
Satellite A60-106: ATI graphics card driver update
I have a laptop Satellite A60-106 and I was told to update my driver graphics ATI Mobility Radeon 7000 IGP, otherwise I won't be able to view the photos taken from the video. I'm unable to locate these updates on the Toshiba site. Nobody knows where
-
I read a lot in the news lately on this topic to come "soak the Test" and the rumors swirling around him that it may be Marshmallow: Is - this Marshmallow? How can I register for the test of impregnation? http://Phandroid.com/2015/12/11/droid-Turbo-s
-
What is the difference between HP Envy and HP Pavilion?
Which is better and why?
-
My Email is blocked... Somone tried too many passwords...
My email is blocked someone tried too many passwords. I have tried to reset for the last 8 months through your site but could not get a solution. Most of the information I entered in 2000 I forgot. Can you please help me. I have a few important photo
-
Register a class in a persistent storage?
I have a class with many defined configuration variables. These are defined during execution. Is it possible to back up and recover the class in a persistent storage? If so, how?