More code D8 which do not work in D11.5 - need help?

Similar Questions

• WMI does not work correctly. I need help fixing mine

  I have a program that has access to my WMI to keep my access key activated and it does not work.  I have windows 7 64 bit and need help please.

  Hi Youtoo54,

  ·         What is the name of the program that you are facing this problem with?

  ·         You receive an error message or error code?

  ·         You did changes to the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  Method 2: You try to perform the following troubleshooting steps and check if it helps:

  Check the State of the WMI service start-up

  1. click on start, type "services.msc" (without the quotes) in the search box and press ENTER.

  2. double-click on the service "Windows Management Infrastructure.

  3. make sure that the startup type was set to "Automatic" and the service status is "started", otherwise, if it please change start type and click on the Start button to activate this service.

  Method 3: If the problem persists, let us register the WMI components.

  Save the WMI components

  a. click the Start button, and then in the "Search" box, type CMD.

  b. in the list above, under 'Programs', then right-click on CMD which appears above and choose 'run as administrator' and click 'continue'.

  c. in the open window, type the following commands one by one and press enter after each command:

  CD /d %windir%\system32\wbem

  for %i in (*.dll) do RegSvr32 %I s

  for %i in (*.exe) do %i/regserver

  Note: The WMI Tester window may appear, it is normal, and we can move forward to close.

  d. restart the computer and check if you receive errors.

  Let us know if that helps.

• Windows Vista not working anymore... need help!

  My Windows Vista simply stopped working. I have a Windows recovery disc and a Kapersky rescue disc. After having used both drives that will not repair the Windows Vista, boot into safe or anything else. All I get is a blank black screen with mouse control. Toshiba A205 came with an OS disk. I made a recovery disk, but it does not work... any help with me to enter online would be appreciated... thnaks

  Download the log of the last step, copy it to the USB view or something.

  Clean start

  Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

  Clean boot

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.
   
  Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.
  
  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.

  Reset. If this resolves your wake problem half of the items until you find the one that.

  Safe mode

  If the above does not help.

  Use safe mode with Networking if you need internet access.

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Go to the Startup tab, and then click Start secure (also check network if necessary). Reset. Come back here and uncheck the box secure start to return to normal mode.

   

  or

   

  If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support]

   

  Startup Repair

  If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support].

  In the Display Options Options Advanced startup, use the arrow keys to highlight repair your computerand press ENTER.

  Select the Startup Repair tool.

  Startup Repair makes a log file. See C:\Windows\System32\LogFiles\Srt\SrtTrail.txt.

  To access if Windows does not start, in the Advanced Boot Options screen, use the arrow keys to select repair your computerand press ENTER.

  Select command prompt.

  Type

  type C:\Windows\System32\LogFiles\Srt\SrtTrail.txt | more

  .

• My first does not work... NEED HELP PLEASE!

  Hey!

  I really need help!

  I downloaded the cloud adobe creative pro adobe 2015 first cc and when I start it upward

  error "Adobe Premiere Pro could not find capable video game modules

  Please update your video display drivers and repeat"appears.

  
  

  I don't know what to do...

  
  

  my graphics card is the Strix OC ASUS GTX 970

  and my processor is the intel core i7 6700 K 4.0 Ghz

  
  

  I checked my graphics card drivers and they was up to date.

  I tried many things, but none of them works!

  My operating system is Windows 10 Pro 64-bit

  P.S adobe software all work in my computer perfectly fine... only the first dosen't work...

  
  

  hope you will reply quickly...

  It's important!

  Have a nice day ():
  

  try to disable linkscanner and shield online because they block adobe a reason any. You can also try adding exclusion lists.

• Classic BlackBerry My newly bought classic Blackberry left speaker does not work... Need help...!

  Dear all,

  Well want to help please on this, I am from Pakistan and I had my Blackberry classic delieved me US my cousin bought at the shop online BlackBerry and brought it to the hand. Earlier, I noticed that my classic left speaker blackberry does not only ringing sound music sound and speaker sounds come from the right side of the enclosure.

  Everyone has faced this problem with its new classic, and what should I do?

  Please help or guide me

  Yes I also found this above information on gsmarena.com and phonearena.com there only one speaker

• Realtek card gives the error code 10 and does not work since the change of satellite

  How can I fix the realtek on my computer card. It was the dial upwards, after he took off and replace it with satellite my computer wouldn't access internet
   
  How can I fix the realtek on my computer card. He has been on dial-up, after taking if off dial-up and replaceing with satellite my computer wouldn't access internet. Noted code 10 and realtek does not work. So a please help fix me my computer.

  Hello

  What operating system is installed on the computer?

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  See the following article:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

• I currently have an ad - one that I use frequently on IE8 which does not work on IE9. How can I stop to get a message that I have new updates when IE9 is the only update?

  I currently have an ad - one that I use frequently on IE8 which does not work on IE9.  How can I stop to get a message that I have new updates when IE9 is the only update?

  Hi altak38,
   
  -What is the add-on which you speak?
  -Are you referring to Windows Update with Internet Explorer 9 update several times even if it has been installed?
   
  If so, follow the steps in the following article to resolve this problem.
   
  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
   
  Post back with more information for the issuance of the add-on - to help you help.

• I'm tryin to update my computer... I keep getting code and the error 646... I need help I am if confused as to what to do to get these updates... I tried to disable my firewall, but which is not good... Help, please

  I'm tryin to update my computer... I keep getting code and the error 646... I need help I am if confused as to what to do to get these updates... I tried to disable my firewall, but which is not good... Help, please

  Download and install the update/s who is / are relevant to your computer manually.
  IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=974771&displaylang=en&stype=s_basic

  TaurArian [MVP] 2005-2010 - Update Services

• I get the error code 643 during the installation of the dates... I tried yesterday, some steps that have been put to me... they did not work... Please help

  I get the error code 643 during the installation of the dates... I tried yesterday, some steps that have been put to me... they did not work... Please help

  There are 2 updates will not install... Ive had this problem for the last 6 months

  See if this Microsoft Support will help you:

  http://support.Microsoft.com/kb/976982

  Note: there are 2 methods. If the August challenge it for me does not help, try a 2nd.

  Another article to number 643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  .........................................................................................

  Take a look at this answer of MS Answers forums:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/what-is-error-code-643-Windows-vistaunable-to/4ab6dd4e-e9eb-4a0f-b822-ad976e2c33c6

• Mini HP which has not worked for a year at least.

  We have a mini HP which has not worked for a year at least. I try to get back to work and am getting a screen that says: enter the administrator password or start on password. Then the disabled system 83656543. can you please help?

  Hello

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the BIOS ( f10 ) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.

  Post back with the details of any error message.

  Note:  If the option to run these tests is not available in the Bios Menu, use the menu diagnosis f2 .

  Kind regards

  DP - K

• Having the right password Adobe which does not work on cc can find no password to work CC. need to replace slice on the second computer

  Recent new laptop. CC not updated I have even on office and was on the previous laptop and can only be loaded on both devices.

  I work Adobe password which will not work on cc cannot find or find a dedicated password CC. In a traffic jam.

  If you're talking about being asked a password during installation or update, this is the password for your COMPUTER, from your operating system verifies that you are authorized to make changes

• Install the problem. I get the error output code: 1603 which is not listed on the help site

  Install the problem. I get the error output code: 1603 which is not listed on the help site. All of the solutions that is the meaning?

  Error 1603 http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html

• Microsoft windows search indexer stopped working and was closed - need help please

  I started getting this message

  Microsoft windows search indexing has stopped working and was closed
  today
  I deleted the files as described in other threads
  I tried to restore the index - which has not worked
  the sfc/scannow gets to 78% and then I get an error log - I can't open the newspaper - I do not have permission
  What should I do?
  my computer came pre-loaded with vista, so I did not install CD

  Hello

  Download and install Windows Search 4.0 and see if it helps.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14850

  Hope this information helps.

• Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Hi, Mksethompson,

  What is your model of computer?

  Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

  http://support.Microsoft.com/kb/968279

  Dell issue

  http://en.community.Dell.com/support-forums/software-OS/f/3524/t/19278096.aspx

• Why my code D8 will not work in D11.5?

  I've been running some educational apps that I built for students for years in the D8 and D10.  I have upgraded to 11.5 two years ago but could not do my apps to work and have not had the time to figure out why, so I do not use it.  Unfortunately now, Apple has dropped Rosetta in Lion and therefore my projectors produced Windows won't work on newer Mac. Here is an example of code to one of my apps that has problems. The first is a frame script that controls a base dialog box.  Students click on a phrase on the stage (sprite 2) and the program responds with a response above in the field 'FAResponse '. I used to use a mouseUp Manager on in the script of the frame but work stopped in D5 or D6 (I don't remember) and someone here told me a script of behavior under my sprite 2 called dialogEngine, which is supposed to return the number of the clicked sprite. He used to work.  He now returned EMPTY to writing of the frame.  Why what happened now? Before I could click sprite 2, 3 or 4 and the behavior script would return the number of sprite clicked to my frame script. How can I fix it?

  The second problem is where I put the text in the field "FAResponse" = "the answer to the selected question.   They used to show in white on black background. Now, nothing is displayed.  I have spent hours trying to understand why and figured out that I now need a updateStage before setting the text in the response field. Why do I do now?  I have several lines in the program who send the text to the response field.  I tried to place the updateStage in loop Manager on (since I only need a updateStage) awaits a SPACE continue the discussion but that does not work. Is there a way to get the text to appear in the FAResponse without updatStage nor a way to update without having to do it in front of hundreds of places in the program?  It was not easy to explain.  I hope someone can help, thanks!

  Image scripts:

  on exitFrame

  go to the section

  end

  on dialogEngine me, spriteNumber

  Global gPam1Response1, gPam1Response2, gPam1Response3, gNumTicks, gTalkedManager1

  put spriteNumber - I checked to see what my behavior under sprite script back and find it EMPTY

  If spriteNumber = 2 and gPam1Response1 = 0 then

  Sprite (2) .visible = FALSE

  Sprite (3) .visible = FALSE

  Sprite (4) .visible = FALSE

  gNumTicks =. 4 * 60

  countTime

  the 8-0 member foreColor value

  define the text in the field "FAResponse" = great, "you should be familiar with the company first."

  gNumTicks = 4.8 * 60

  loop

  define the text in the field "FAResponse =""

  gNumTicks =. 3 * 60

  countTime

  otherwise if spriteNumber = 2 and gPam1Response2 = 0 then

  Sprite (2) .visible = FALSE

  Sprite (3) .visible = FALSE

  Sprite (4) .visible = FALSE

  dialogEngine behavior for above frame script:

  on mouseUp me

  -just specify the script to frame this sprite has been clicked

  sendSprite(0,#dialogEngine,me.spriteNum)

  put the "behavior of executed dialogue."

  end

  managers of movie for above image script script:

  on countTime

  global gNumTicks

  startTimer

  Repeat for due timer < gNumTicks

  nothing

  end repeat

  end countTime

  on the loop

  put 'on the run loop. "

  global gToggle

  If gToggle = "space" then

  Repeat while the keypressed SPACE <>

  nothing

  end repeat

  on the other

  countTime

  end if

  end of loop

  In order to get the spriteNum sent to the frameScript, try to change your mouseUp handler for:

  on mouseUp me
    --  tell the frame script that this sprite was clicked
    sendAllSprites(,#dialogEngine, me.spriteNum)
    put "dialog behavior executed"
  end
  

  Your other problem/s I suspect are tight loops repeat intervene you in the #countTime and the #loop of managers (I would say rename your turn 'loop' to something that is not a keyword of Director). Change your code to avoid these loops won't be easy but is something you should try in a limited way to see if it helps.

  In addition, the updateStage() command is broken on the Mac platform - I forgot the details (if only SW or projectors too) and this is not documented in a TN anywhere either.