WMI does not work correctly. I need help fixing mine

Similar Questions

• Y580 background winds does not work correctly... help!

  Hi all, I just got my new Y580 a week ago. I use HWMonitor to check the internal temperature. The highest ever record temperature is 81 c for the CPU (where the game). I think it's high enough, think that I have the laptop high about 3 inches off the table and my room is quite cold (it's winter here). So I checked to see if the low 3 vents are working properly. I think that the bottom venting air draws in to cool the Interior. So if I use a small piece of paper, he should stick to the passage because it is sucking air. The piece of paper only stick to the upper vent (the one near the ventilation hole on the side of the laptop), but not the bottom 2. Also, the upper vent feels kind of cold to the touch after extended use, which make sense, because it is sucking air. However, the lower 2 events feel the same and feel a little warm. This thread believe me the 2 vents below even does not work properly.

  
  

• I try to install Photoshop CS5 Extended on Windows 10, what does not work and I need help

  As stated above, I need help to install Photoshop CS5 Extendet on Windows 10.

  After going through the installation process, I get the following message, and now I would like to know what to do to solve this problem:

  Exit code: 6

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error, error 53 (s), 50 warning (s)

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ERROR: The following payload errors were found during the installation:

  ERROR:-Adobe CS5 Infrastructure CSXS: installation failed

  ERROR:-Microsoft_VC90_ATL_x86: installation failed

  ERROR:-Adobe Media Player: installation failed

  ERROR:-Adobe CS5 language x 64: installation failed

  ERROR:-Microsoft_VC90_CRT_x86: installation failed

  ERROR:-Support for Adobe Photoshop CS5: installation failed

  ERROR:-Adobe Bridge CS5: installation failed

  ERROR:-Installation of common fonts x 64 recommended: installation failed

  ERROR:-AdobePDFL x 64 CS5: installation failed

  ERROR:-Adobe Photoshop CS5 German language Pack_x64_AdobePhotoshop12-de_DE_x64: installation failed

  ERROR:-DeviceCentral_DeviceCentral3LP-de_DE: installation failed

  ERROR:-Microsoft_VC80_MFCLOC_x86_x64: installation failed

  ERROR:-Adobe XMP panels CS5: installation failed

  ERROR:-Photoshop Camera Raw: installation failed

  ERROR:-AdobeColorCommonSetCMYK: installation failed

  ERROR:-Adobe Mini Bridge CS5: installation failed

  ERROR:-Microsoft_VC80_CRT_x86_x64: installation failed

  ERROR:-AdobeColorJA CS5: installation failed

  ERROR:-Adobe ReviewPanel CS5: installation failed

  ERROR:-Photoshop Camera Raw (64-bit): installation failed

  ERROR:-Microsoft_VC90_MFC_x86: installation failed

  ERROR:-Adobe Photoshop CS5 Core_x64: due to a lack of Language Pack installation

  ERROR:-Suite Shared Configuration CS5: installation failed

  ERROR:-PDF settings CS5: installation failed

  ERROR:-DeviceCentral: due to a lack of Language Pack installation

  ERROR:-AdobeTypeSupport CS5: installation failed

  ERROR:-AdobeColorVideoProfilesCS CS5: installation failed

  ERROR:-AdobeColorCommonSetRGB: installation failed

  ERROR:-Adobe Player for Embedding x 64: installation failed

  ERROR:-the necessary common fonts x 64 Installation: installation failed

  ERROR:-Microsoft_VC90_ATL_x86_x64: installation failed

  ERROR:-Adobe CS5 Extensions CSXS: installation failed

  ERROR:-Microsoft_VC80_ATL_x86_x64: installation failed

  ERROR:-AdobeOutputModule: installation failed

  ERROR:-Microsoft_VC90_CRT_x86_x64: installation failed

  ERROR:-Microsoft_VC80_CRT_x86: installation failed

  ERROR:-AdobeCMaps x 64 CS5: installation failed

  ERROR:-AdobeTypeSupport x 64 CS5: installation failed

  ERROR:-Microsoft_VC90_MFC_x86_x64: installation failed

  ERROR:-Adobe WinSoft Linguistics Plugin CS5 x 64: installation failed

  ERROR:-AdobeColorEU CS5: installation failed

  ERROR:-AdobePDFL CS5: installation failed

  ERROR:-AdobeCMaps CS5: installation failed

  ERROR:-AdobeColorNA CS5: installation failed

  ERROR:-Microsoft_VC80_MFC_x86_x64: installation failed

  ERROR:-standard Adobe 2.0: installation failed

  ERROR:-Microsoft_VC80_MFC_x86: installation failed

  ERROR:-AdobeColorPhotoshop CS5: installation failed

  ERROR:-Microsoft_VC80_MFCLOC_x86: installation failed

  ERROR:-CS5 Adobe Extension Manager: installation failed

  ERROR:-Adobe ExtendScript Toolkit CS5: installation failed

  ERROR:-Adobe AIR: installation failed

  -------------------------------------------------------------------------------------

  Thanks for your advice Bani, I solved the problem by turning off McAffee Antivirus and firewall after installation was possible. But: Photoshop is not usable because of small symbols and letters in the software...

• My CS4 does not work correctly. I have the download. I need to reinstall it.

  My CS4 does not work correctly. I have the download. Should I delete everything and reinstall and use the provided SN? Will it work?

  If you want to reinstall, do not delete anything. Use the uninstaller in your CS4 folder and if asked, select "delete preferences" then uninstall. When you have finished reinstalling, downloading and updates.

• Poloroid MP3 does not work correctly.

  Original title: connect a MP3 player to the poloroid mp3 files

  Sorry for the caps, my problem is I just got a Poloroid MP3 and it does not work correctly as no movement between the icons etc. Y at - it anykelp like a download or something I can put it on its feet again. Thank you very much

  Gary lumbard... e-mail * address email is removed from the privacy *.
  

  Hi Gary lumbard,.

  Thanks for posting your question in the Microsoft Community Forum.

  According to the information of Polaroid MP3 player does not work on your Windows XP computer.

  Since you are faced with the question with player MP3 of Polaroid, you can get in touch with ato Polaroid supported if verification updates is available for the player and for further assistance.

  Polaroid support

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Config Free - Connectivity Doctor does not work correctly

  Hi all

  yesterday, I've updated the driver for my WIFI, with the driver found on the Toshiba support page. After installation, the Config Free utility does not work correctly. Indeed, the diagnosis of the doctor of connectivity us window briefly, just to replace it with the classic error message: cfmain.exe has encountered a problem and needs to close...

  The details are
  AppName: cfmain.exe AppVer: 5.0.0.119 ModName: venapi.dll
  ModVer: 5.0.0.3 Offset: 000034df

  Thank you very much for your support

  I found this:
  cfmain.exe - this is a component of the Toshiba network device. Network device Toshiba is Toshiba network device selector. For starters, this application requires a common Module of Toshiba ACPI and hotkey wireless.

  Well, because of this description that I recommend you to reinstall the common modules and wireless keyboard shortcut utility

• My Phlinxtogo game does not work correctly

  Original title: "C:\Program Files (x 86) \Pogo Games\Phlinx Go\PhlinxToGo.exe" __My Phlinxtogo game does not work correctly ".

  \Pogo Games\Phlinx to Go\PhlinxToGo.exe

  Hello
   
  1. what operating system is installed on your computer?
  2. What is the exact error message you get?
  3. what happens when you try to run the game?
  4. has been the work of game much earlier?
   
  There is currently no information on the compatibility of Phlinxtogo with Windows 7.
   
  However, you can perform two or three steps and check if it helps.
   
  Step 1:
   
  Once the Phlinxtogo game is downloaded, right click on the .exe file and run as administrator.
   
  Step 2:
   
  If this does not help, run the game in Windows compatibility mode and check.
   
  If none of the suggestions work, I'm afraid you must contact the manufacturer of game for a better support.
  
  Aziz Nadeem - Microsoft

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• spell check does not work correctly. It highlights each word

  my spell checker does not work correctly. When I send a message it highlightes, virtually every word and all are spelled corectly - help please

  You use Outlook Express when you see this? Office Word 2007 or 2010 is installed?

  You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install the Microsoft Office 2007 or Office 2010 system
  http://support.Microsoft.com/kb/932974

  Outlook Express cannot use the check spelling of MS Word in Office 2007 or newer. A free spell-checking the download is the easiest way to get around this.

  Vampirefo spell check.

  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952

  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html

  You wanted TinySpell or. (Check spelling while typing).

  Download it here:
  http://www.tinyspell.M6.NET/

  Australian English spell checking
  (Also suitable for other English speaking countries).
  http://www.justlocal.com.au/clients/oespellcheck/

  If you have an earlier version of Office, see this:
  http://www.Outlook-tips.NET/archives/2006/20061228.htm

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.

• Control Panel does not work correctly.

  original title: salvation

  Hello

  My Control Panel in windows vista 64 bit does not work correctly, when I want to use functions such as catering or to uninstall a program or changing the State of account it just an error message like missing a file on each of them has its own error message, is it possible that I can restore the control panel to its previous state I tried windows restore, but it doesn't work.

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• My DVD player does not work and all the information I can find is "this device does not work correctly.

  Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

  I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

  I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The side-by-side function does not work correctly, windows overlap

  original title: sizing windows side-by-side

  The side-by-side function does not work correctly, windows overlap.  How do fix you this feature?

  Hello

  It is Aero Snap.  When you select a window how you "cutting" it in position?  You do not use the window key and the arrow left/right or are you drag / drop window?  If you drag / drop, using the keyboard shortcuts help to solve the problem?

  Kind regards
  Alex T.
  ~ 2007-2011 MVP Windows desktop experience ~

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows media Center does not work correctly.

  * Original title: Windows Media Center

  Downloaded 10 hated windows he returned to windows 7

  Now, windows media Center does not work correctly. Very slow to do anything whatsoever at all, let alone play music

  Any suggestions please

  Try to uninstall, reboot, reinstall, restart WMC according to the http://www.howtogeek.com/howto/26107/how-to-reinstall-windows-media-player-in-windows-7-to-solve-problems/ article is for WMPlayer but just to check the entry of WMCentre instead.

  If that doesn't help, try a SFC/scannow and see if it detects and corrects something - https://support.microsoft.com/en-us/kb/929833

• I run the program "TuneUp utilities" and I recently received a notification of the statement that "the BHDrvx64device does not work correctly.

  I run the program "TuneUp utilities" and I recently received a notification of the statement that "the BHDrvx64device does not work correctly" program proposed to update the driver, but there is no provision in any of the dialog boxes.  Windows Help and support says: help for this program was created in Windows Help format, which depends on a feature that is not included in this version of Windows. However, you can download a program that will allow you to view help created in the Windows Help format. All this brought me here, please, how to fix this?

  The last thing you want to do is install and run any third tuneup/Optimizer program.

  In the worst cases of such utilities can cause system failure or program, uninstall it, having restored firstly of the changes he could do.