Mount VESA LT1952P $
Hello everyone,
I hope I can find support in this community.
I recently bought a $ LT1952P and I intend to stand on one foot of Ergotron Neofelx via Mount VESA, but I'm not able to detach the support provided.
It seems to be fixed by three screws that seems impossible to reach.
Is there a way to remove it?
Thanks in advance.
Just did. Everything went smoothly. Thank you very much.
Tags: Lenovo Products
Similar Questions
-
HP Pavilion 23xi: Desk Mount double HP Pavilion 23xi monitors
Hello
Is someone can you please tell me if it is possible to mount two monitors of 23xi hp pavilion on a double rack mount monitor office.
Look at the back of the screen, it does not appear that there are screws for the monitors to climb.
I just wanted to get this information before I go ahead and buy a monitor to double desk stand.
Any information on this would be greatly appreciated.Hello
There can be NO standard mount (VESA). You need a drill and a good skill for drill holes on this subject. I think that you must buy monitors that supports VESA brackets or buy the following combinations:
http://WWW8.HP.com/us/en/products/OAS/product-detail.html?OID=8525135
(Note: check the hardware compatibility)
HP Pavilion 22xw/cw, cw/23xw, 24xw/cw, cw/25xw, 27xw/cw).
Kind regards.
-
is there any wall, mounting kits available for the iq500 or iq800?
as per the title of the topic...
Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO PrinterThen there is this one for the IQ500 series...
-
23 - D039 HP all-in - one PC wall mount
Hello
I'm considering buying a HP 23 - D039 and accounding to the sheet it is wall mountable with mount Vesa to purchase separately, but I can't find any additional information in this regard, for example if it it a standard out of the support wall shelf or it is a specfic to HP and this wall mount model.
I downloaded all manuals, that I can find online, and there is no mention of this ability. So, I visited a few stores and talked to employees and they have no idea about it. Before buying the device, making it at home and disecting it, I'm not sure where to find information.
Thanks for any help someone can provide
See you soon
Michael
At the rear of the unit is the HP logo and below that you'll see a location lock and a Panel, behind this Panel is where the holes will be located.
If you look at this picture it will be number 1 and number 2 is the lock.
-
Is there a way to adjust the feet on the iq500 if monitor sit on the best angle
I read on the documentation and the best possible angle is 10 degrees, I was wondering if the feet are angled roughly 10 degrees or less in the direction of oppisite to the monitor the monitor can sit safely at an angle better than it does currently... Has anyone tried a readjustment of feet on iq500?
Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO PrinterCarolinaPhotogu wrote:
You need the VESA mount option. This way your minimum angle would be completely vertical and you could open it up to a negative 10 degrees.
I hope this helps.
Pete
Thanks Pete,
Just did a search on google for VESA + IQ500 + TOUCHSMART + MOUNT and found this...
The VMAHP-22 VESA Mount Adapter to iVERSAL fit correctly to commercial HP dx9000 TouchSmart PC Business and office of consumer from the IQ500 series;
So go check it out! Woiuld be good to mount to the back of the office with an adjustable mount...
Message edited by JimT on 31/01/2009 23:25 -
I want to install a wall of monitors from LD4710 and I'm trying to confirm that the hardware (screws) I need mounting VESA Monte. I think it's an M4-0, 7 x 10 mm, but want to confirm. Any help?
Thank you
Dan
Thanks for the reply. My next response will be somewhat loose, but I assure you it is valid. For you, I'm providing this page Wikipedia: editing flat screen Interface
The tables provided show you what you need, based on the dimensions of your parts. Please let me know what you think. Thank you!
Mario
-
Greetings,
After using the ATI Radeon X 1300 in the docking station advanced with my W500 (4061-38U) for more than a year, I'm in a clear position to conclude, it is not worth. Here are the reasons why you should not have this configuration:
-the complete loss of a KEY using a Docking Station features: the ability to quickly dock/undock the system without rebooting.
-l' use of the PCI - e 1 X is performance of garbage.
-native resolution of 1900 x 1200 of the 4061-38U, which is very frustrating to read. If this screen ends up not used at all.
-the ability to connect 2 displays: 1 DVI using, the other using VGA with loss of quality very little according to the screen, cable and the resolution.
-the docking station operating in the high fan noise (even though I had it worked)
-Finally the dock become unstable due to electricity and heat problems
-the size of the time, thinking about how to continue to be stubborn and approaching different configurations to improve performance in you question:
-> Lenovo USB DVI box, (slow performance, bandwidth USB. CPU consumption)
-> Other products USB DVI (same questions)
-> Double/triple Matrox display (likely to be slow performance, not part is no PCMCIA card for Laptop Docking procedure, do not know if it requires a restart, too expensive to my point of view)
-Finally and not least important, the size of the space: it is possible to operate the laptop closed cover and care so one of the LCD on the dock, table mounted VESA.
So, yesterday, I got back to this configuration more simple but more effective: W500 + advanced dock + 1 Viewsonic 22 '' LCD in landscape + Viewsonic 22 "LCD 1 running in portrait mode + disk backup in the dock UltraBay + external USB mouse and keyboard.
Pernalonga
Hi ppl
After more than a year and I still maintain the same configuration: mentioned in this topic. He plays very well, graphics wise.
Overall, the W500 is a great laptop. It's been updated with a 256GB SSD Samsung 830 and nothing more.
4GB 32bitW7
All the best for you people
Pernalonga
-
where can I find the amount of the wall for 610 1201
where can I find the amount of the wall for 610 1201
c0rnel wrote:
Can you give me more descriptions on what a 610 1201 is?
Monitor? TV? What brand?
Not given much chance to find the product you describe, but I'm more than happy to help you with this.
I guess since the OP's post in the Touchsmart forum they are referring to the computer 610-1201 Touchsmart, no idea why you can't find it, the OP has given all the correct information.
OP that you are probably looking for the adapter #VK554AA, but you will still need an additional VESA wall bracket.
Google for "touchsmart adapter mounting wall mount vesa" and you will see many sources for this part.
-
The header says it all.
Probably not, because it's a setup of command which is made during the build...
See > http://www.apple.com/shop/buy-mac/imac-vesa
To double-check, call Apple support or your Apple store and ask.
See > https://locate.apple.com/
For other VESA mount options that use a stand of the iMac.
See > http://www.imacmount.com/
and > http://eshop.macsales.com/item/Newer%20Technology/NUMNTIMVS
-
HP Pavilion 27xw: HP Pavilion 27xw comes with VESA mount?
Hello! Just ask, the HP Pavilion 27xw comes with a VESA mount? Thank you!
Hello
No, from his record:
http://store.HP.com/wcsstore/hpusstore/PDF/v0n26aa.PDF
If you wish, you can buy the following VESA mounting kit that is compatible with the 27xw flag.
http://WWW8.HP.com/us/en/products/OAS/product-detail.html?OID=8525135
Kind regards.
-
I also need this part. I don't know why I can't find anywhere to buy. HP customer care is also still distraught, and they kind of made me look like an idiot. As what I bought was not a true product of HP? Can someone please?
Hi @rsondrup,
Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are looking for a mounting bracket for your screen. I am pleased help you.First a little moral supports. I found this HP page, so that you are not alone in the desert.
HP CVB100 VESA Mount fit Kit (L6V75AA)
Unfortunately, when I looked for this item using the HP parts storeand HP PartSurfer and also sought to your screen (using the T4Q59AA part number), this part does not appear as an option. For me, it would mean that the support has been discontinued. The only thing I can suggest with this in mind is to check dealers that perhaps someone has still in stock.
I realize it's not the answer you want to hear, but it may still be available there.
-
Is there a specific acer or the Z35 adapter vesa mount, once you remove the media.
I have the supports VESA 100 x 100, but does not because of the depth of the vesa mounting location
Or have I missed something.I buy the used however monitor
Thank you
Mike
-
Anyone can check if the monitor V196HQL Ab accept a VESA mount?
Anyone can check if the monitor V196HQL Ab accept a VESA mount?
A picture of the back of the monitor would be great!
Yes, the V196HQL has VESA mounting points.
-
Information on sales 2710 m & manual reflects that the monitor can be mounted with a standard VESA mount adapter 4 holes. It's geat. The manual indicates that the user must remove the cover on the back of the monitor to expose the 4 hole mounting. Well, it's not accurate. Remove the cover and there is no model 4 hole as indicated in the manual. The unit can be mounted with a hole of 4 VESA solution with spacers with a 200 x 100 pattern, if 4 of the 6 screws on the back are deleted. The manual should be corrected to indicate the current model. I suspect that documentation was mobilized earlier but not properly put models to date for the 2710 m. After the monitor, one of my first tasks was to remove the base and mount the arms. My first reaction was dismay that I have a solution that requires pretty much the unit be mounted on a swing arm. Well, I'm not easily abandon so I've been thinking about the problem & studied at the back of the camera a bit. The six screws under the cover are 6 mm screws, I guess, so with pimples, it doesn't seem to be possible. I managed to solve the problem, but for an average user this would have probably resulted in a support call. A FAQ would be great if the documentation is not corrected for users requiring a wall mount can you fact. Just an observation. The monitor has a beautiful picture for the price. The actual buttons for control are excellent and much better than the feel of the buttons in my opinion. Overall a great product for the money. It should just focus on the documentation of perfection.
You bet there. HP monitors support forums and should see the post. It is not a high priority bug or anything like that. I thought I'd put the post here could help others who drop out the 2710 m. It's a very nice monitor and the minor inconvenience take some out. If my message can help some people to move the fire of great documentation. If it's really important to HP, they will update the FAQ or documentation to reflect the way it really is. If it was a serious bug I make account to RESUME with an email to [email protected] , so it isn't just a software bug that I feel the post on the support forum should be enough.
-
Is it possible to have a W790B on a Standard VESA wall mount?
I bought the TV and a VESA standard wall mount but it does not I should have waited. I would use the wall bracket purchased and it seems that there is an adapter, but I can't find it in the store, only on the forums. No one else knows anything about it?
Hi Van1i34,
The W790B series is a model non-US TV and you seem to be located in the Canada. Please get in touch with Sony of Canada for further assistance about your concern.
Maybe you are looking for
-
How can I delete messages in a folder?
The title is the question
-
envy4520: envy4520 U.S. / UK compatibility
I have a printer Envy 4520 ProdnumJ6U70B purchased in the United Kingdom. I move to the United States and tells me differnet stories if it will work? Did I take my printer to the United States so it will work? Help, please Thank you very much Lachla
-
HP Pavilion g6 - 2073ca - 2 TB hard drive
I want to replace the hard drive in my hp Pavilion g6 (it no longer works). I would like to replace it with a 2 TB drive. Are there problems with the computer being able to manage this capability?
-
Sugestion to replace the Board, DAQCard-6062e
Hello I have a DAQCard-6062e card and I want to replace it with a new card with PCI Express (PCIe) port, we want the same specifications as the former. What type of card you suggust?