Move a file to the ASM system tablespace

Similar Questions

• How can I move my files and the operating system on a new hard disk on Inspiron 580 s.

  My hard drive failed Diagnostics recently and needs to be replaced.  I have since installed a new hard drive in Bay 2. I need to move everything from the old drive to the new drive and delete the old which is completed. So what is the best way to go about this?

  pjrl

  The simplest method, I prefer to install a replacement hard drive, is to clone the existing hard drive to the new, that will also transfer all applications and programs.

  You need an imaging utility, similar to True Image Home 2015.

  http://www.Acronis.com/homecomputing/products/TrueImage

  Acronis resize partitions transferred to match the size of the new hard drive.

  Hard drive manufacturers, also have their own free cloning software available, but it can be used only with their hard drives.

  First, install the new drive as the secondary and the image of the main hard drive in it.

  Immediately after the cloning, shut down the system, switch the data cable [SATA port 0] to the new disk, making the new master hard drive and see if the system boots properly.

  Start the system with only the new hard drive connected.

  Be sure to leave the original drive disconnected, until the new hard drive is working to your satisfaction.

  Before cloning a hard drive, make sure that the existing drive has no corruption or virus on it, because they will be transferred to the new hard drive.

  It will take a second SATA data cable, there should be a spare connector to SATA power inside the housing.

  Bev.

• How can I transfer a file from the operating system to a backup of the production running VM virtual machine?

  Problem:  After I do a backup one using ghettoVCB on a local VMFS volume, I have a virtual machine that I can start something happened to that running.  However, sometimes I just need a file from the OS level, which means that I would need to start to get them, but then I have an IP address conflict.  I can't imagine a way to have the NICs turned off and still be able to move the file.  If I change the IP addresses, the software that I need to create the file that I need to transfer no longer works because, although there no need of constant connectivity to the seller, it is locked to the public IP address.

  Material:  I have two 4 ESXi hosts to work, each with local VMFS volumes.  They share a private vlan common and a vlan common public.  They each ssh, ftp, wput, wget, and rsync available.  I have a Windows 2003 Server VM which also hosts a NFS and the VI client and other VMWare tools.  It also has private and public interfaces as do virtual machines that would be to make and receive the OS files.

  Question:  How can I transfer a file from the operating system to a backup of the production running VM virtual machine?

  Thank you!

  Yes Mr President, make sure you set the network on this virtual machine to be connected to the 'Internal' vswitch, you set up before turning the power on to the virtual machine.

  -

• How can I configure the folder in which a movie TS file stores the report?

  How can I configure the folder in which a movie TS file stores the report?

  Thank you

  Too bad... I found it

  Thank you

• Windows Live Mail - How can I move old files to the newly created folders mail?

  How can I move old files to the newly created folders mail?

  original title: windows live mail/vista/records
  1. Simple click on the header of a message to select it.
  2. CTRL + F3 will highlight all.
  3. Right-click on highlighted messages and drag them to the new folder.
  4. Release the mouse button and select copy here.
  5. If the move is successful, delete the original folder if you wish.

• files on the ssd system has lost!

  Does anyone know of a simple way to format with the /s switch on the format command files system, Vista x 64 does not load on my SSD without file system. Vista x 32 is responsible to this topic... install aborted, just used the Vista x 32 to validify disk SSD.

  All I have to do is to run the format command on the disk... and transfer system, but notting works

  Format/s
  Copy the files of the operating system IO. SYS, MSDOS. SYS and COMMAND.COM
  to boot your system to a new disk drive formatted you can
  use as a system disk. If the FORMAT can not find the operating system files,
  It prompts you to insert a system disk.

  Just run the command with the switch, and he should ask the disk system to get the files, then they willl be on the SSD and you should be all set.  I suspect it's more complicated than that, because you knew that the law change so I guess you already tried what precedes, and it did not work.  Is it possible that the SSD is not compatible with Vista 64 bit?

  Be more specific about what happens or does not happen when you try the above, if this does not work.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Moving files: I am wanting to put the existing files to a new folder, how do I create a new folder and move those file to the new folder?

  I am wanting to put the existing files to a new folder, how do I create a new folder and move those file to the new folder?

  I am wanting to put the existing files to a new folder, how do I create a new folder and move those file to the new folder?

  Hello

  Go t the location where you want to create the new folder, right-click and select new/folder. Name the folder.

  Go to where the files, select the files and then use the right mouse button to drag the files into the new folder. When you drop the file, a pop-up menu, select the Move option.

  Let us know if you have any other questions.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Is there anyway that I can use the MP3 files for the computer system sounds in windows 7

  Is there anyway that I can use the MP3 files for the computer system sounds in windows 7. Any help would be appreciated, thanks - Joe

  I don't think so. If you convert the .wav files, you could. Google for an MP3 to WAV converter.
   
   

• How to move audio files of the program in the time line?

  All of a sudden I can't move audio files of the program in the time line - I read that Adobe said in previous forums click with the right button on the A1, but nothing in this discussion has helped me solve this problem. It was working before. I am a beginner user, so I could be missing something really obvious. My time scale is in blue. I noticed in some tutorial videos that it was yellow.

  Hi lauranoel,

  The reason is due to a bug, explained here: FAQ: why no audio or video will not at the track where I drop?

  Next time, just remove and In or Out to mark, and then drag the clip.

  Thank you

  Kevin

• Move a file to the muse from one computer to another that I will lose all related is pdf! How to solve it?

  Move a file to the muse from one computer to another that I will lose all related is pdf! How to solve it?

  Hello.

  Please try following steps to recreate a link to the PDF files.

  1. move and place the PDF file all missing in the any folder to the new computer.

  2 open the Control Panel file Muse and hit open assets of Windows > assets

  3. right click on a missing PDF file and choose repeat the link.

  4. Select the correct file to recreate a link and it will connect all the missing files in the folder.

  Let me know if you were talking about something else.

  Concerning

  Vivek

• Move all files with the file hard, in two data warehouses

  You can move these files from the data through VC or WinSCP3 store? You have on the eve of vm? There is that one disc and files are on two separate data stores.

  Please move configuration files to the same data as the vmdk files store to ensure an appropriate server recovery. I ran a backup because it is now, but in this State, I can't assure you that I will be able to recover properly. ProdVMLUN1A3/CO01 (configuration files) ProdVMLUN4A22/CO01 (vmdk files)

  Thank you

  D

  If you're on ESX 3.0, you can do a few things.  We could be to stop the virtual machine in question, and then choose migrate.  In the wizard you will be asked if you want to 'keep' or 'move', choose move.  Another way would be to use VMware Converter

  If you ran 2.5 and ESX 3.5 vCenter, you could do it live with sVmotion.

• Copy the files of the ASM disk (file system)

  Hi all
  
  I want to copy the files from the DSO to the filesystem (separate drive). is it possible... ? If yes how can I do this...
  
  can someone give me a helping hand for this?
  
  Thanks in advance,
  Max

  Max wrote:
  Hello

  I use version 11 GR 2.

  Please see,
  http://download.Oracle.com/docs/CD/E11882_01/server.112/e16102/asm_util003.htm#sthref951

  HTH
  Aman...

• In my production, size of data file for the database system is 98.2%

  Hi all

  Can u please help me what I do, it's my production database and system tablespace is show 98.2% full... Details

  Tablespace		SYSTEM
  Status		Online
  Size of the file (MB)		3,380.00
  Auto expand		Yes
  Increment (MB)		10 h 00
  Maximum file size (MB)		32,767.00

  Hello

  you don't need to do anything about it either because the auto extend turned on, it will go to maxsize 32 GB

• How to move a file to the rear using the Terminal

  Hello world

  I just recently started to learn how to use the terminal in OS X I learned how to move files from one directory to another, but I don't know how to move a file back again. Here is an example:

  (I'm already in the Desktop directory) In my office, I have a folder named "music" and a file called "algo.rtf". In order to move the "algo.rtf" file in the "music" folder, I type the following command: "musica algo.rtf mv / '. That works perfectly fine, when I check, the file is now in the new folder.

  But what happens if I want to move the file "algo.rtf" which is now in "musica" on the desktop? I can't understand. I tried the following:

  'cd musica' (so now I'm in the folder where the file is) and from there I typed: "mv algo.rtf Desktop /" (but then it is said; no such directory not found)

  I understand that he says no "found" because it is looking for a folder named "Desktop" in the folder named "music" and this is why it does not work.

  But that still doesn't help me much because I still don't know how to bring it back to "Desktop". If anyone knows how to do this, I would be very happy for your response!

  Thank you.

  Use:

  MV algo.rtf...

  (140623)

• How to remove an infected file in the folder SYSTEM VOLUME INFORMATION on T43?

  Respected Sir/Madam,

  Recently, I have bee affected by a series of blue screen errors. Norton AntiVirus and other well-known software just crash. Update of virus definitions files are reported as being corrupted. Fortunately, I used this SPYWARE DOCTOR which founf a file infected by HACKIT name. ROOTKIT in the SYSTEM VOLUME INFORMATION folder, which is hidden from the usual interface of WINXP.

  Please suggest some methods on how to DELETE the infected on this hidden folder?

  IF I MAKE THE HIDDEN VISIBLE THROUGH THE IBM R & R PARTITION, IT WILL HAVE AN EFFECT ON THE DATA ON THE DRIVE? ALSO, AFTER YOU DELETE THE INFECTED FILE BY USING THIS METHOD, IF I SWITCH IT BACK TO HIDDEN, WILL BE IS TO HAVE NO EFFECT ON THE CURRENT HARD DISK CONTENT?

  pleas suggest alternative methods to get rid of this infection.

  Thank you!

  SYSTEM VOLUME INFORMATION is your Restore.As system an alternative to do a factory restore, try flushing the system restore, then you can start fresh. This procedure will not delete your saved data and apps like restoration to the State of the plant would be.

  In order to remove the XP System Restore Points:
  (On XP, you must be logged in as an administrator to do.)
  Go to start > run and type msconfig and press ENTER.
  When opens in msconfig, click Launch System Restore.
  On the next page, click System Restore settings on the left.
  Check the box enable the system restore.

  Reset. Reassemble and turn on system restore. A new Restore Point is created.

  So, if you still have problems, it would mean that you have active running malware, or you have run at the same time a scanner that was falsely reported as this file, please come back. Often our malware removal tools are captured by General scanners as "Hacktools.