Move the library file to new mac, as well as metadata

Similar Questions

• How to move the FLASH_RECOVERY_ARE file to new drive?

  Thank you for taking my questions!
  
  Does anyone know how to move the files from e:\oracle\flash_recovery_area\* to a new disk?
  
  Thank you
  Kathie
  
  THE OPERATION HAS FAILED:
  I created a new pfile.
  Edition pfile changing old drive to the new drive letter letter.
  immediate stop
  to the E:oracle\flash_recovery_area\ S:\oracle\flash_recovery_area\* *.
  startup nomount;
  Create spfile from pfile;
  stop immediately;
  startup
  
  Now I get ORA = 38760 - this database instance could not turn on the flashback database;

  Kathie,

  Try this by first editing the database

  1) First Turn off Flashback:
  
  SQL> alter database flashback off;
  
  Monitor alert log for messages regadring flashback:
  
  Then s turn the flashback on again.
  
  SQL> alter database flashback on;
  
  SQL> Alter database open;
  

  Concerning

• Is there a way to move the existing files to new music notes memo?

  I love the new music notes app Apple has just come out.

  I have a ton of chords and riffs recorded in the memos. Is it possible to move these in the musical notes?

  Thank you for your courage!

  He does not appear. I just have a look at the app and so far I don't see how you can import new samples for her. Records appear in iCloud drive in a folder of music notes. The invitation to be audio not compressed with a frequency of 41 000 kHz sampling and the bit depth of 32 bits stored as .caf float

  Conversion of a voice memo to the same format and fall into the same folder does not work, then we can assume that I missed some details so that it can be considered a valid music note.

  The good news is that if I spend a musical note existing relevant iCloud out of the folder, wait what it is to be removed from my device, and then add it back again, it works. It is then may be possible after all, with a little effort.

  Visit https://developer.apple.com/library/mac/qa/qa1534/_index.html to find advice on how to go about the conversion.

  I've been using this command:

  afconvert - v f "caff" d F32@44100 Test.m4a Test.caf

  TT2

• How can I move the iTunes file that keeps track of plays on a new hard drive

  I added an SSD for my MacBookPro and use it as a boot drive. I finally understood how to get the entire library of music to play without moving all the music for the SSD (not enough of space for everything), but I have lost all my game account.

  There must be a file that lists all these information. Where could I find it? I tried to export the library but the iTunes on the new disc he did not recognize.

  Thanks for any help you can provide.

  10.11.6, iTunes 12.3.4.1

  The file is the iTunes Library.itl file. This file guard track of everything in iTunes. And I mean everything. What kind of music you have, what has been deleted, playlists, play counts, ratings, date added, files, but a group which is not a lot of information duplicated in the tags attached to the media.

  It is quite difficult to judge where exactly you are in this process because you don't have not said us what you did exactly. It's easy to make a mess of a library in doing things without knowing exactly how iTunes really works rather than how we think it works. You can try to copy this file .itl on the original to the new one and maybe drive he always knows that the media files are the original disk, but I'm not positive.

  Just to let you know, using a library distributed in this way can lead to complications on the road and requires that begin you now learn the details of the operation of iTunes if you can avoid the problems.

  On the iTunes library files - https://support.apple.com/HT201610 - does not mention that a complete library of work also includes other files and also files in the iTunes folder.

  More about the library files iTunes and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management

  What are all these files in iTunes? - http://www.macworld.com/article/139974/2009/04/itunes_files.html

  Where are my iTunes files located? - http://support.apple.com/kb/ht1391

  iTunes 9 [and later]: understanding iTunes Media organization - http://support.apple.com/HT201979 - more information on the Organization of the new structure https://discussions.apple.com/message/26404702#26404702

  Image of the folder structure and the explanation of the different versions of iTunes (post turingtest2) - https://discussions.apple.com/docs/DOC-7392 and making a portable iTunes library.

• I just put my account on a new PC dreanweaver... now I can't update the site.  Do I have to manually move the index file?

  I just put my account on a new PC dreanweaver... now I can't update the site.  Do I have to manually move the index file?

  There is no function in DW or creative cloud to put your files of the actual location of a computer to another.

  If you are using a new computer, you will need to make a copy of the real site files and bring them to class, or create a site empty on the new machine, using the current FTP information and click on down (the arrow in the files window icon) files from the server for making new copies on your new machine.

• To move the library continues to be the library system hard disk

  Hello everyone,

  I would like someone to help me with this question. I've migrated the pictures opening. My library as subject of 70,000 photos.

  Everything went well. I imported the photos keeping referenced masters to na DHM (external hard drive). But, as I wanted to access all my library in the devices of ohters (Iphone and Ipad) that I bought the 1 TB Icloud.

  I noticed that I had 2 thousand pictures consolidated and referenced 68,000.  Then only 2,000 photos are ok to download.

  And there is the first question. It takes too long to download and photos do not appear on devices! Is this normal?

  Here's what I thought:

  I move my library to an another DHM (os Journeling) and consolidate all the photos. Then I will download them all to the ICLOUD. And this way, I'll have all the pictures in all devices.

  But my concern is the following.

  I tried this.

  I copied the actual library to na DHM and deleted in the MBP and open PICTURES. I expected that PHOTOS recognized the library the library even only in a different location. BUT ISN'T. Photos 'think of it as a new library and not the photo of system library.

  Is it possible to move the library and continuing to be photography libray system?

  Help me please.

  Thanks in advance

  Antunes Duarte (greetings from Portugal)

  Is it possible to move the library and continuing to be photography libray system?

  You can set the photo library of the system in Photos > Preferences.

  Double click on the library on your external drive to open pictures. When the Photos is running, open the Photos > Preferences > General.

  Click on the button 'Use as Photo Library system'.

  

  If this button is gray, fine - the library is already the photo library of the system and you can activate iCloud photo library for her.

  If you want to use the library with iCloud, the disk must be formatted correctly.  You can use a hard drive with iCloud photo library, if the file system is Mac OS extended (journaled).

• An easy way to re-import massive media after a hard disk crash if the library files are intact?

  Hello

  I'm running 10.2.3 on OS X 10.11.3 FCPX. My external hard drive just crashed, and while I was able to save most everything else (including library files, proxy support, etc.), Miss me about 90% of the media about 2 000 "original" files. Because the library files have been saved, it seems that my projects seem to be intact, including the cuts and changes. Since FCPX knows what files and parts of files were previously imported, import should be easy... except for the fact that there are about 1 800 distributed clips on dozens of camera archives.

  Is there a way to 'massive re-import' office where he knows the clips came, without having to wade through thousands of clips in dozens of archives and manually by clicking on each of them? Because there is also the fact that, due to several archives of the camera used, different are multiple "Clip #1", "Clip #2", etc. that FCP is solved by adding a number at the end (for example, "Clip #1 (fcp1)" and "Clip #1 (fcp2)"). " I'm afraid that if I import everything in disorder (maybe I not initially import a clip, but returned later and get it), I'll have to sift through to find a needle in a haystack and rename the files manually.

  Even if I have to specify the locations of these archives of tens of couple, it would be so much easier than having to go into each of them and click 1 800 files manually... Any suggestions?

  Please and thank you!

  Too bad. I had assumed the import > reimportation of the camera wasn't working, but apparently because I had saved the AVCHD archives on my hard drive via the Finder instead of 'Create the Archives' of in Final Cut, he just didn't see them. Creating new archives of these same AVCHD files (or rather the folders 'PRIVATE' which originally housed them on the SD card) did the trick and I was able to reimport. Alternatively, I could have re-recorded these SD cards PRIVATE folders and it would have identified those as the original 'camera' once again, too and I could have reimported it... but who would be tedious.

• How can I view the Photoshop files on my Mac to my iPad and iPhone?

  How can I view the Photoshop files on my Mac to my iPad and iPhone? I am new to Adobe products and understand with the latest version creative Cloud is no longer does.

  Hi leonoraw51296428,

  It is not possible to synchronize files from the computer to your phone.

  Then I suggest you to download and install the Application Photoshop (Photoshop Mix, or Photoshop Fix) on your phone.

  Kind regards

  Tanuj

• script storage vmotion which move the config files too?

  Hello

  I have a VMWare admin for a long time but I am very new to the PowerCLI and script. I could find, modify and use scripts that do a simple storage vmotion: all disks go to a data store - but also one that can move independently - disk hard drive 1 to the data store X, hard disk 2 to the data store Y. However, I can't figure out how to recover the configuration files as well. I just got the book "VMWare vSphere PowerCLI reference", which confirmed my fears that you can't call these configuration files (and Exchange files, etc.) as a single parameter as you can hard drives. You use the SDK, that I have even fewer know that the CLI of power!

  I keep my BONES (disc 1) files and configuration files in 'BONES' labeled data warehouses, so whenever I move a Hard Disk 1, I want to keep the configuration files, swap files, newspapers etc. with the OS disk file and move them to another "OS" datastore. No matter who else set up like this and already is figuring out how to automate this type of move? I know that I can move the entire VM to a data store, then move the hard drives 2 and above, but it's a waste of time and I have no OS LUN that are too big.

  Thanks in advance for any help you can give!

  Thanks for buying the book, I hope that you may find useful.

  Yes, you are right, there is no single cmdlet that lets you move only the configuration files.

  You can do this with the RelocateVM_Task method in the SDK however.

  Such a script, in its simplest form, will look something like this.

  $vm = Get-VM MyVM
  $configDS =Get-Datastore -Name "MyDS1" $hdDS = Get-Datastore -Name "MyDS2"
  
  $spec = New-Object VMware.Vim.VirtualMachineRelocateSpec $spec.Datastore = $configDS.Extensiondata.MoRef
  Get-HardDisk -VM $vm | %{
      $hdSpec = New-Object VMware.Vim.VirtualMachineRelocateSpecDiskLocator    $hdSpec.Datastore = $hdDs.ExtensionData.MoRef
      $hdSpec.diskId = $_.Extensiondata.Key
      $spec.Disk += $hdSpec}
  $vm.ExtensionData.RelocateVM($spec,"defaultPriority")
  

  You specify the destination of the files "config" in the line of $configDS.

  Hard disks will be migrated to the data store that the script gets in $hdDS.

  If you want to only move the configuration files, you specify the same data store to which they are already for hard disks.

  $vm = Get-VM MyVM
  $configDS =Get-Datastore -Name "MyDS3" $hdDS = Get-Datastore -Name "MyDS2"...
  

• How to move the index file...?

  I have files of data to index as follows...
  
  /U02/MY_TEST_DATA/indx01.dbf
  /U02/MY_TEST_DATA/indx02.dbf
  
  I'm running out of disk space available in u02.
  
  How to move the two files above to u03? I have a lot of space in u03.
  HP Unix, Oracle 10g R2.
  
  What I need to change other settings when I move the location of the file? for example, backup, archieve etc...
  
  Please advice.
  
  Thank you
  GISH

  Hello..

  Well you can do it in one of 2 ways: -.

  1 put the tablespace contains the data offline files, copy the data index files to the new location, and then change the database rename ' old/file/name/location of the file' to 'new/file/name/locatio. put storage space online. Completed successfully, remove the file data from the old location.

  2. in the hope that these two data files belongs to 1 tablespace and tablespace that contains only the index, you can create a tablespace with its data on the new mountpoint file again, then rebuild the index of aid (dynamic script)

  change owner.index_name tablespace new_tbs_name n parallel reconstruction;

  Once all the indexes have been moved to the new tablespace you can drop the previous old tablespace.

  I would prefer 1.

  HTH
  Anand

• Firefox 6 need to move the cache (files temporary folder) to a specific file

  Hello I need to know how to move the temporary file for firefox folder 6. I managed to do it easily for IE as it can be done from the settings tabs for firefox but, I need to access the topic: config so I understand. However after that I implemented browser.cache.disk;D:\Temporary Internet Files and browser.cache.offline;D:\Temporary Internet Files, nothing seems to happen like firefox still uses the original place

  Pref is correct browser.cache.disk.parent_directory - does not exist by default, the user needs to create.

• We have installed Office 2010 on a system that died & want to move the software for my new system. How to reactivate my product key Code

  We have installed Office 2010 on a system that died & want to move the software for my new system.  How to reactivate my product key Code

  Assuming that you had bought a copy of the sale at retail of Office 2010 (i.e., it not was not preinstalled by the manufacturer of the computer or downloaded and installed using a "product key card"), just install it on the new system and turn on normally.  In some cases, you may use telephone activation and explain the circumstances (i.e., the old computer is dead).

  Microsoft Office is not a step "off authorizes" as some other apps (Adobe comes to mind).

• How to move the MSWMM files and keep the data on my computer?

  I downloaded digital film from my camera to a destination on my D drive as a file MSWMM (collections), and whenever I try to move the downloaded film (collection), it does not recognize the movie more.

  How to move the MSWMM files and keep the data on my computer?

  The mswmm file is the project file, not a video.
  Think of it as a recipe for a cake, it only tells you what to do with the ingredients, but does not include the ingredients.
  The mswmm file tells the computer to look in a certain folder to use a video or audio file.
  If you move the file, then MM knows not where is the file, then you must tell it, by right clicking on a red x on the timeline and then choose search for the file.

• using windows media player, save voice of a Sony ICD-UX71RED to the library files?

  using windows media player, save voice of a Sony ICD-UX71RED to the library files?

  Hi NikClark,

  ·         You try to synchronize the device with windows media player?

  ·         What happens when you try to synchronize?

  ·         You get the error message?

  Follow the steps in the article.

  Set up a device to sync in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

  For reference:

  Windows Media Player sync: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

  Resolving sync conflicts: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/resolving-sync-conflicts-frequently-asked-questions

• How to find the library files that are not due to problems of indexing

  I need help to know how to find the library files that are not as a result of indexing problems?

  I use Windows 7

  Thank you

  Charlene

  Try to open the folder that the library uses directly.  For example, if it is your Documents folder, open C:\Users\Charlene\Documents