move the MCs with loop for?

Similar Questions

• How to move the King with the castle on the titans of chess?

  I'm not sure of what is called the movement but in titans of chess, the computer moves the King with the Castle, how to make the same move? I'm new to this, so any help would be a great help.

  It is called castling.

  You can even move if 1) the King and the Tower never moved, 2) if the King is not in check, move in a square in failure, or end up in failure, 3) there is no room between them.

  You can Castle, by touching the King and you'll see there is an option to pass 2 or 3 squares toward either Rook, who will perform the Castle. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Impossible to move the camera with the touchpad in the games while moving in Windows 8?

  I've seen this happen on two Toshiba laptops now, I can't move the camera with the touchpad in games like TF2 while I also move with WASD keys. The problem disappears when I use an external mouse, even if, I was wondering if anyone else has this problem, and if someone has solved. I disabled the Edge slides in the Synaptics Control Panel if it helps.

  Thank you in advance! :)
  Edit 15/5: I did more research, and it seems that there is a feature called "PalmCheck. I am yet to confirm because I'm away from home, but I will as soon as POSSIBLE.

  Solved! The feature was PalmCheck Synaptics Control Panel.

  To fix:
  1. look for 'mouse', click on settings, then 'Mouse' with the mouse icon.
  2. click on device Options.
  3. click on settings.
  4 expand the category of "pointing".
  5. click on PalmCheck, then the small icon of gable beside him.
  6 move the cursor to a Minimum or offshore.
  7. apply, OK, and you're done!

• I want to create a new look for our website using Muse and move the hosting of GoDaddy for Business Catalyst. How can I publish my new Muse on exsiting URL design and change hosting?

  you want to create a new look for our website using Muse and move the hosting of GoDaddy for Business Catalyst. How can I publish my new Muse on exsiting URL design and change hosting? @@

  Hi love,

  You can publish your Business Catalyst, simply open your file of muse and select files-> publish.

  Please refer to this tutorial:- publish your site with Adobe Web Hosting | Learn the Muse | Adobe TV

  In addition, once your site is published, you can add your domain to your site hosted on BusinessCatalyst.

  Please refer to this tutorial to add your domain name:- http://helpx.adobe.com/business-catalyst/using/change-site-domain.html

  Hope this helps

  Kind regards

  Rohit Nair

• I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  anesvet,
  I'm going to sound like I'm repeating myself tonight... (see previous 4 posts...)  but try this:

  When you start start pressing F8 until you get the Windows startup options.  Then try "Last known good configuration" see if that helps.  If this does not work, try to F * then try to go to Safe Mode.  If those who do not help, I would start with your XP CD to recovery mode and run "chkdsk/r" then "sfc/scannow".  QQ learn manage!

• Table row with loop for each group to set the variable.

  HI: There is probably a simple answer for this, but I don't the have not found...
  
  I have a single row table to move through a group to set a variable containing a sum running. I'm not display the amount in the table but when I saw the report, I see that the table is expanding (add lines) for each loop.
  
  The only line table has 3 columns.
  
  1st column
  <? for-each: AC_GROUP? >
  
  2nd column
  <? xdoxslt:set_variable ($_XDOCTX, 'xAmtVar', xdoxslt:get_variable($_XDOCTX,'xAmtVar') + CURRENT_AMOUNT)? >
  
  3rd column
  <? end foreach? >
  
  Can I use <? for each group? > or something else. My requirement is to set the value of the variable with the total running, but because the loop is adding lines for each value he travels (though not displayed), it's also affecting other areas of the presentation of the page.
  
  Hope it makes sense. Thanks in advance.

  You can do it many ways.

  No need to loop
  You can create a variable and specify the amount of the sum directly to that.

  or

  loop through, then add as you do.

  give any space or enter characters in a word between them, just put it in a single form field will be

  But as I said, I'd definitely go with the first option.

• Do nothing in the case structure with loop For

  Hello

  I am trying to extract data from my signal (0.3 0.4 0.6...). I want to extract values greater than 0.5 and put it in a table. If I use a loop For which I can determine each index of my data to be compared and it happened in the structure of the case. In the 'Real' box, I wanted the value to extract outside the loop For. And I want to "do nothing" if my value falls within the box 'False. ' However, it displays error, saying "' Tunnel: lack of assignment to the tunnel '."

  I tried to select 'Default', but it does not work since I use a Boolean comparison. I tried to use the registry to shift, but in vain too.

  Someone could guide me on this to extract only a value greater than 0.5 and index them?

  For example "0.6 0.7 0.8; 3 4 7 index.

  Satisfaction will be given.

  

  

  Here you have

• Move the icons with a laptop

  I have a laptop with no mouse, how to move the icons?

  Hello

  · What is the number and the model of the laptop?

  By pressing the arrow keys on the keyboard, you'll be able to move around the keyboard. You can also access the link below which holds information about the keyboard shortcut: keyboard shortcuts for Windows: http://support.microsoft.com/kb/126449

  List of keyboard shortcuts available in Windows XP: http://support.microsoft.com/kb/301583

• Move the disk with Windows 7 to a new box

  I have Windows 7 installed on the drive HARD n ° 1 of my Compaq desktop computer.  The power supply fails to start (with the light flashing on the PS).  I have another almost identical box with a faster processor and more than 50% of available memory.  The disk HARD #2 in the box Windows 7, but it is indicating that he is not an authorized copy.  I would like to move the HARD disk #1 to the new box and wipe the old disk, HARD drive #2 to use for storage, etc.  When I installed the HARD drive #1 existing, HDD #2, I can see the #1 disk, but it does not start to it.  I can access the files #1 but I can't to start her.

  I tried to boot on it in the start menu, but it does not start.

  I can make this transition?  What should I do to make this work?

  Still don't give us the information complete, that we need.

  It's a detail or full an OEM System Builders license for the edition of Windows 7 Ultimate?

  Everything you say is that you bought.

  «I've recently updated the HARD drive #1 XP to Windows 7 with an official version of the software.»

  If it is full retail Windows 7 Ultimate license make a clean install with it on the second machine.

  How to do a clean install:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  And make sure that you have only installed on a hard drive in a single machine

  Using this method may require phone Activation.

  If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  See you soon.

• How do I move the UCS with OS blade on the local disks between chassis

  Hello

  I have to move the blade between chassis - blade have OS installed on local disks and Associates profile.

  I can simply:

  Shutdown

  Enter the maintenance

  remove the chassis

  Exchange with other blades of the second chassis

  power on

  Blade are properly recognised and profile will go with it?

  I found Advisor here it is best to unassign blade profile and partner back after removal:

  https://supportforums.Cisco.com/discussion/11230671/physically-move-Blad...

  but it seems too complex for me - if someone who tired of this exercise can share some experiences?

  See you soon

  Hello

  Assuming the frame belong to the same domain (even pair of fabric for interconnection) and you are using ESXi, try the following:

  1 - Enter the host in maintenance mode (it can be move virtual machines to another server/power them off / take them into so maintenance mode)

  2. cut the blade

  3. ensure that the Service profile does not have a disc of scrub policy so that data is not deleted when the profile Service (SP) is ungrouped

  4 separate the SP

  5 decommissioning of the blade

  6 - Remove the blade and insert the new blade

  7. move the second chassis original blade

  8 - though the blade and an associate of the same/original SP

  9 powers on the blade

  10. take the server out of maintenance mode. as well as virtual machines

  Note: For the blade inserted in the drive, that we released our blade, you can create a new SP and pair with it or you can actually have any MS (including that attributed to the recently released blade) and assign it to the new blade.

  A single SP by sever and that one server per SP.

  SPs are independent from the hardware (as long as the material is compatible with the functions set up by the PS)

  Let me know if this info has helped, if not let me know and I wil expand or try to make your job easier.

  Please note ALL useful answers

  -Kenny

• Best practices with the sliders with loops

  I have the following code:

  Declare
  
      CURSOR c_contacts_cursor
      IS
        SELECT OUTLET_CODE,
          OUTLET_NAME,
          CONTACT_NAME,
          MOBILE_NO,
          ALT_NO,
          ADDRESS1,
          ADDRESS2,
          CITY,
          POSTCODE,
          EMAIL
        FROM SYNC_CONTACTS
        WHERE (source      = 'W' OR SOURCE = 'T') AND SURVIVAL_FLAG = 'Y';
  
      TYPE temp_string IS TABLE OF VARCHAR2 (2000);
          
      V_OUTLET_CODE  temp_string;
      V_OUTLET_NAME  temp_string;
      V_CONTACT_NAME temp_string;
      V_MOBILE_NO    temp_string;
      V_ALT_NO       temp_string;
      V_ADDRESS1     temp_string;
      V_ADDRESS2     temp_string;
      V_CITY         temp_string;
      V_POSTCODE     temp_string;
      V_EMAIL        temp_string;
         
  BEGIN
  
      OPEN c_contacts_cursor;
      FETCH c_contacts_cursor BULK COLLECT INTO
      V_OUTLET_CODE,
      V_OUTLET_NAME,
      V_CONTACT_NAME,
      V_MOBILE_NO,
      V_ALT_NO,
      V_ADDRESS1,
      V_ADDRESS2,
      V_CITY,
      V_POSTCODE,
      V_EMAIL;
      CLOSE c_contacts_cursor;
  
      FOR indx IN 1 .. V_OUTLET_CODE.count
      LOOP
        --xecutable statements on V_OUTLET_CODE(indx) and the like
  
      END LOOP;
  End;
  
  

  I used the above structure at length in many functions and procedures of all associated with an application and works very well. However, I began to review my code and I thought he might be better way to do it. One of the methods I've found is cursor for loop: http://www.techonthenet.com/oracle/loops/cursor_for.php

  and http://docs.oracle.com/cd/E11882_01/appdev.112/e25519/cursor_for_loop_statement.htm#LNPLS1155

  I'm trying to understand the advantages and disadvantages of each method. I get the following (rating my approach is, and cursor for loop is B

  (1) A is faster because it uses in BULK COLLECT IN as opposed to B which is implicitly opens, fetch a row and close each round loop.

  (2) A is a bit messy, a lot more code as opposed to B which is readable, ranger.

  First of all, I would like to know, if my conclusions are correct or not?

  Second, what other differences might be between the two?

  Third, is there another approach, that I'm not aware? Or what improvement could be applied to my approach, if there is?

  Hawk333 wrote:

  Yes, I did. Executable statements are most HTTP POST and PUT request that write in MongoDB on a platform that does not write in BULK. So I have to write one record per HTTP request.

  Then pass PL/SQL to run multipe HTTP put and recorded at the same time. In which case manual removal bulk buys you no performance gain and zero scalability.

  Use DBMS_PARALLEL_EXECUTE to chunk the workload. Execute each thread (parallel work process) using a standard FOR cursor loop (for example for loop in(select...) end of loop; c...) --and inside the loop, make HTTP calls.

• How can I synchronize my favorites of the device with Firefox for Android

  is it possible that I can sync.the bookmarks on my device with Firefox for Android

  Hello

  We have just implemented this in beta version of Firefox. So if you install it, you must go into the settings and at the bottom there is an import of point Android. A dialog box allows you to import bookmarks and history. It will be in the end V15.

  Thank you
  Michelle

• Problem with loop "for".

  Hi all

  How can I solve this problem

  

  Disable indexing on the right side of the loop for.

  Consider using shift registers.

• clear the table of loop for

  Hello world

  I have a question about the erasure of history to the table. It sounds simple, but I'm really confused...

  As the example attached below, I've built a table within a while loop and a loop. After totally run the program once, when I run it a second time, it seems that the table has a memory of the last time, that is the size of table does not start from 0, and appears the old number from last time, even through its initialization of the for loop.

  How can I make it go empty each time when I restart the table?

  Need your help. Thank you very much. : )

  You must also have a shift in the loop FOR. This will keep the data for the duration of the program, but it clear at the beginning of the next run.

  

• Move the gun off-host for maintenance

  I'll take a host down for maintenance, I have a replica on this host.   I need to move that line off the coast of the host?  If so, how?  It looks like the power off replica can not be moved.

  I guess only the file replica on the data store is referenced and I can be propelled out of the host of some sort and have no impact for users.  This hypothesis is correct?  Or I have to move the replica some how?

  You can move this replica by choosing the move off the power option invited when placing the host in maintenance mode.