Moving from a static network to and auto IP network

Similar Questions

• Installation: HPLIP and remote printing from ANDROID and iOS on a static network of HP printer

  I recently installed a HP LaserJet Professional m1212nf MFP printer on my network and gave it a static IP address.  On my main computer (also statically networked - Ubuntu 12.04) I installed the hplip service and can print to it successfully.  On the same computer, I have a Dymo Labelwriter and a HP ColorLaserJet 1215 connected by USB.

  I can print from my iPhone / Tablet Android of ICS to the printer and the printer color laserjet use Airprint service, but I can't seem to print on the m1212nf with Airprint.  If I print via CUPS with Airprint driver I get a completion from print but the printer does not print.  Now, since the m1212nf printer is NOT connected to the CUPS print server by USB, it makes sense, unless I can be told how to configure CUPS to print to the device on the network.

  -or-

  I think, from what I've read so far, this Icould use eprint if there was a way to put a windows driver (Yes, reluctantly, I have access to a Windows laptop that I can put on my network) on the m1212nf and hplip driver which currently allows it to communicate with my main computer.

  I would prefer a solution Airprint as Airprint works with mobile devices, the other two printers.

  OK, egg on my face!

  It turns out that iOS functioned perfectly well, but does not have the Android app, I had on my tablet.  In addition to continuation of the Android issue, I have found only one free application that worked (at least for the text) in the game store, but we were really a "demo" as the print was a watermark, but we could remove the watermark for two separate awards, one for the text and one for the photos.

  But in responding with a solution to this problem myself, I consider that it {SOLVED].  In addition it leaves no doubt that Airprint and the "generate airprint-' script works for versions of Ubuntu Ubuntu on the side.

• I am trying to be moved from the first, but in the list of adobe programs to download, rather than see the installation option, there is only the opportunity to evaluate, and once the download is finished the program will not open. What should I do to dow

  I am trying to be moved from the first, but in the list of adobe programs to download, rather than see the installation option, there is only the opportunity to evaluate, and once the download is finished the program will not open. What should I do to download the first?

  If you have a first subscription (check here, Adobe ID) and you have a 64-bit computer, Troubleshooting FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

• I just moved from windows to mac and changed my photoshop and lightroom, but now continues photoshop and lightroom stopping self on the mac, mostly photoshop and lightroom, anyone know why?

  I just moved from windows to mac and changed my photoshop and lightroom, but now continues photoshop and lightroom stopping self on the mac, mostly photoshop and lightroom, anyone know why?

  Yes, never make it.  I think Mac Yosemite by default active Standby Mode.

  Nancy O.

• Photoshop moved from the old to the new computer. I have no serial and cd. I get the message 'memory couldnot' restarted for the activtion but no change please helpo

  Photoshop has moved from old new machine of the toe. Have the cd and serial No. Get the message "memory could not be allocated for activation. Restarted but no change please help

  Hello

  CS2 and earlier versions are more activated because the activation servers are gone.  You must download the CS2 buildreleased for customers who still use the old software or buy a version of Photoshop.

  See https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml

  ^ Ani

• WAG-120N and static ip - wireless and wired clients cannot connect to the internet

  Greetings,

  I use the N WAG-120 AP and switch for 3 computers laptops and 2 Office. Our Department is assigned only a what IP static of our server, as well as a pc can connect to the server and the internet. I use the first lan port of the 120N Wag as a WAN port and I attribute the static IP address, and the subnet, default gateway, and DNS addresses. Connected clients receive an ip address from the DHCP (192.168.1.10x) router, but cannot connect to the internet. How can I configure my router to allow clients to connect?

  Thank you in advance!

  The default LAN IP of the WAG subnet is 192.168.1.0/255.255.255.0 belongs to 192.168.0.0/255.255.0.0. This means that 192.168.1.0 IP addresses exist side WAN and LAN of the WAG. What makes this configuration completely cannot be routed.

  Change the address LAN IP of the WAG to an IP outside the corporate network, for example using IP addresses private 172.16/12, for example to set the address LAN IP 172.16.1.1 with 255.255.255.0 subnet mask.

  The alternative would be to use the WAG as a point of easy access only, and not as a router. However, due to the 255.255.0.0 subnet in your network company you will not be able to access the web interface except from an IP address corresponding to the LAN IP address subnet of the WAG. Of course, this does not affect the wireless or wireline customers connected to the WAG...

• Moving from XP machine again iTunes library PC Win7

  Does anyone know how to move a library with ratings, playlists, etc., to a new Win7 PC iTunes?  The mapping of the file will be slightly different on the Win7 machine; therefore a straight copy Library.XML file will not work.

  Hello

  Welcome to the Microsoft Answers Forum!

  The first thing to do is to make sure your music is all set in the iTunes music folder. If you have some other songs where you need to consolidate your library.

  Then install iTunes on the new PC, but do not add any music.
  With closed iTunes, drag the iTunes folder to music on the new PC on the desktop.

  Then with iTunes closed on both computers, you must copy the iTunes folder from the old PC to the fodler music on the new PC so that it replaces the one dragged out you.

  It does not really matter how achieve copy - network or via an external drive.

  The last thing you need to do is to check the permissions on the iTunes folder that you copied on the new PC, your account needs full control.
  Help the Vista folder permissions
  http://windowshelp.Microsoft.com/Windows/en-us/help/2464a180-e5dc-45D1-a2b8-3c8a2b571e9d1033.mspx
  http://www.mydigitallife.info/2007/05/25/how-to-take-ownership-and-grant-permissions-in-Windows-Vista/

  Here is a description of how to transfer using an iPod to transfer:
  http://support.Apple.com/kb/HT1329?viewlocale=en_US

  If moving from XP, you must remember that the file will be in a different place so you can't copy it back exactly in the same place.

  You can also contact the itunes service for assistance.

  http://www.Apple.com/support/iTunes/

  Shalini Surana
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Join the URI from outside the network

  Hello

  I have a problem to make a call from outside the network of phones internal using URI.

  If I test a call from outside (with Jabber video) to my URI ([email protected] / * /), highway E logs show:

  TVCS: event = "Call rejected" Service = "SIP" Src - ip = "IP address" Src-port = '5060' type-aliases-Src = Src-alias "SIP" = "sip:[email protected] / * /" Dst-alias-type = "SIP" Dst-alias = "sip:[email protected] / * /="Call-serial-number="aaaaaaaa-bbbb-cccc-dddd-eeeeeeeeee" Tag "zzzzzz-Davis-0000-1234-xxxxxxxxx" detail = 'Not found' Protocol = "TCP" response code "404" = Level = '1' elements UTCTime = "2015-06-15 13:26:03, 214"

  If I check the call history, I see that my test call is not crossed:

  Source: sip:[email protected] / * /

  Destination: sip:[email protected] / * /

  Type: Non-traversal

  Protocol: SIP H323<->

  Status: 404 not found

  Step 1
  Area band bandwidth default node
  Alias 1 SIP of source:[email protected] / * / (Url)
  Target alias 1 sip:[email protected] / * / (Url)
  SIP protocol
  Address AAA. ABM CC. DD:5060
  TCP transport
  Not found a reason
  Cause 404

  Step 2
  Crossed bandwidth of Zone node (server)
  Target alias 1 sip:[email protected] / * / (Url)
  SIP protocol
  Address AAA. BBB. CCC. D:25793
  TLS transport

  Step 3
  Crossed bandwidth of Zone node (server)
  Alias target 1 [email protected] / * / (H323Id)
  H323 Protocol
  Address AAA. BBB. CCC. D:1719
  Unsaved pattern
  Destination not found cause

  My configuration:

  * X VLAN: CUCM 10.5 10.5 unit, 10.5 CUPS, ExpressWay C X8.5.1, highway E X8.5.1 (1 of 2 network adapter), DNS server, ad server

  * VLAN DMZ: highway E (the second network card)

  * Outside: External DNS

  (1) ExpC

  (a) areas

  Name	Type	Calls	Bandwidth used	Status of H323	SIP status	Status of search rule
  DefaultZone	Default zone	0	0 kbps	On	On
  CEtcp-[CUCM_PUB_IP]	Neighbor	0	0 kbps	Off	Assets	The search rules permit: 1
  CEtcp-[CYCM_SUB_IP]	Neighbor	0	0 kbps	Off	Assets	The search rules permit: 1
  Neighbor CUCM	Neighbor	0	0 kbps	Off	Assets	The search rules permit: 1
  Covered area (client)	Customer journey	0	0 kbps	Assets	Assets	The search rules permit: 2
  Covered area (UC)	Unified Communications crossing	0	0 kbps	Off	Assets	No rule search configured

  Jabber works both inside and outside.

  Details

  Name: Nearby CUCM
  Type: neighbor
  Hop count: 15
  H.323 Mode: Off
  SIP mode: on
  Port: 5062
  Transport: TCP
  Accept records submitted by proxy: enable
  Media encryption mode: Auto
  Support of ice: Off
  Authentication policy: do not check the credentials
  Trust of SIP authentication mode: Off
  Peer 1 address: CUCM_PUB_IP (-online green)
  Address of the peer 2: CUCM_SUB_IP (-online green)
  Profile area: custom
  Monitor the status of peers: Yes
  Call signalling routed mode: always
  Automatically respond to the H.323 research: Off
  Automatically respond to the SIP research: Off
  Send empty INVITATION of interoperability calls: on
  The poison SIP mode: Off
  Encryption of SIP mode: Auto
  Mode SIP REFER: forward
  Limit mode line SIP SDP attribute: Off
  Length limit of SIP SDP attribute line: 130
  Band MIME multipart SIP mode: Off
  Band of SIP UPDATE mode: Off
  Interworking SIP research strategy: Options
  SIP UDP/BFCP filter mode: Off
  SIP UDP/IX filter mode: Off
  Duo SIP video filter mode: Off
  Address record SIP road type: IP
  Proxy SIP-require header band list: white

  Name: Covered area (client)
  Type: Customer journey
  Hop count: 15
  H.323 mode: on
  Protocol: enforcement
  Port: 6001
  SIP mode: on
  Port: 7003
  Transport: TLS
  TLS check mode: Off
  Accept records submitted by proxy: enable
  Media encryption mode: Auto
  Support of ice: Off
  The poison SIP mode: Off
  Authentication policy: do not check the credentials
  Customer settings stimulus interval: 120
  Peer 1 address: ExpE_IP (-online green)
  Address of the peer 2: expe.mydomain.fr (-online green)

  Name: Trasversal area (UC)
  Type: Course Unified Communications
  Hop count: 15
  User name: qwerty
  Password: *.
  SIP port: 7001
  Accept records submitted by proxy: enable
  Support of ice: Off
  The poison SIP mode: Off
  Authentication policy: do not check the credentials
  Customer settings stimulus interval: 120
  Peer 1 address: expe.mydomain.fr (-online green)

  (b) research rules

  Priority	Name of the rule	Protocol	Source	Authentication required	Mode	Type of rehearsal	Pattern string	Behavior model	On match	Goal
  45	CEtcp-CUCM_SUB_IP	FT3	Any	NO.	Alias matching	Prefix	CUCM_SUB_IP; Transport = TCP	Leave	Stop	CEtcp-CUCM_SUB_IP
  45	CEtcp-CUCM_PUB_IP	FT3	Any	NO.	Alias matching	Prefix	CUCM_PUB_IP; Transport = TCP			CEtcp-CUCM_PUB_IP
  50	LocalZoneMatch	Any	Any	NO.	Any alias				Continue	LocalZone.GetDaylightChanges
  100		Any	Any	NO.	Any alias				Continue	Covered area (client)
  100		Any	Any	NO.	Any IP address				Continue	Covered area (client)
  100		Any	Any	NO.	Alias matching	Regex	(3\d{3})@mydomain.fr(.*)	Leave	Stop	Neighbor CUCM

  (c) changes of

  Change the destination to the URI format alias
  ([^@]*)
  Replace
  ------[email protected] / * /

  CUCM IP to the domain
  Regex
  (. *) @(AAA\.) BBB\. CCC\. D | AAA\. BBB\. CCC\. D)((:|;).*)?
  Replace
  ------[email protected] / * /\2

  Convert domain Unified CM provided until highway information
  Regex
  (4\d{3})@expc.mydomain.fr(:.*)?
  Replace
  ------[email protected] / * /

  (2) experience

  (a) areas

  Name	Type	Calls	Bandwidth used	Status of H323	SIP status	Status of search rule
  DefaultZone	Default zone	0	0 kbps	On	On
  DNSZone	DNS	0	0 kbps	On	On	The search rules permit: 1
  Covered area (server)	Crossing Server	0	0 kbps	Assets	(Connections noactive)	The search rules permit: 1
  Covered area (UC)	Unified Communications crossing	0	0 kbps	Off	Assets	No rule search configured

  Details

  Name: Area covered (server)
  Type: Server covered
  Hop count: 15
  User name: qwerty
  H.232 Mode: on
  Port: 7003
  Transport: TLS
  TLS check mode: Off
  Accept records submitted by proxy: enable
  Media encryption mode: Auto
  Support of ice: Off
  The poison SIP mode: Off
  Authentication policy: do not check the credentials
  UDP retry interval: 2
  Number of UDP attempts: 5
  UDP keep alive interval: 20
  TCP retry interval: 2
  Number of attempts TCP: 5
  TCP keep alive interval: 20

  Name: Covered area (UC)
  Type: Course Unified Communications
  Hop count: 15
  User name: qwerty
  SIP port: 7001
  TLS check the name of the object: expc.mydomain.fr
  Accept records submitted by proxy: enable
  Support of ice: Off
  The poison SIP mode: Off
  Authentication policy: do not check the credentials
  UDP retry interval: 2
  Number of UDP attempts: 5
  UDP keep alive interval: 20
  TCP retry interval: 2
  Number of attempts TCP: 5
  TCP keep alive interval: 20

  (b) research rules

  Priority	Name of the rule	Protocol	Source	Authentication required	Mode	Type of rehearsal	Pattern string	Behavior model	On match	Goal
  50	LocalZoneMatch	Any	Any	NO.	Any alias				Continue	LocalZone.GetDaylightChanges
  100	Search of covered area rule	Any	Any	NO.	Any alias				Continue	Covered area (server)
  150	Search for DNS zone rule	Any	All areas	NO.	Alias matching	Regex	(?. *@%localdomains%.*$).*)	Leave	Continue	DNSZone

  (c) changes of

  Change the destination to the URI format alias
  Prefix
  ([^@]*)
  Replace
  ------[email protected] / * /

  Hey Denis,

  It seems that you might have some problems.

  • VCS - C you have a search rule that targets CUCM, but it does not perhaps not for you for 2 reasons.
  1. It's the same priority as your rule of research area of course which may cause routing loops. Change the rule for targeting priority CUCM 100 to something between 50 and 100.
  2. It will only forward calls to CUCM which begin with a 3 and are followed by 3 numbers ending by mydomain.fr(.*). If you are URI calls that do not match this pattern, they will not be sent to CUCM. Make sure to set your match of regex to include your models DN so that your schemas URI incase they are figure not URI.

  Make these changes, and you may have more luck. Make sure also that your CUCM is configured to allow the composition of the URI. Ensure that the device that you are calling has a URI configured on the line.

  Once you make these changes to retest a call. If that fails, send the history research of the failure of the attempt. You can find it on the VCS under status > Search History.

  -Chad

• I use windows 7 and auto start program has stopped working and I can't find a way to recover.

  I use windows 7 and auto start program has stopped working and I can't find a way to recover. Also, I was not able to transfer files on disk or any other storage device, their there on the computer and it says that they work very well, but I can't transfer anything to them.  They will play a disc or view data on a disc that has already been done but don't transfer to the drive if I want to add new files or data to it. Drag and drop is going through the motions, but shows red circle icon.

  [Moved from comments]

  Probably tell you autoplay?

  Control Panel > programs > default Prorams > Change AutoPlay settings

  Or

  In the search programs and files, enter, AutoPlay

• Cannot change the number of laptop Apple ID because I moved from the India

  I can't change the number of mobile for notifications in my Apple/iCloud account, it shows my old Indian number but I moved from the India and now Iam in Tanzania. He asked security questions that I don't even remember...

  I can not yet implemented iCloud keychain...

  Need help, he cannot set up on my Mac, the iPhone or iPad

  You can change preferences/iCloud/Keychain/options of the system?

• I'm moving from PC to iMac. I think that I have brought successfully my profile. My work id of addressbook, but no mail received file is obvious.

  I'm moving from PC to iMac. I think that I have brought successfully my profile. My work id of addressbook, but no mail received file is obvious. The Mail subfolder in the profile of 'new' - "Mail" - is about the same size - 1.6 GB - as it was on the PC, so I guess that the mail has not moved, however, there is no sign of what I can find on the page "news" of Thunderbird. I did move by copying the profile folder of the PC on the Mac desktop, raise the profile of Mac beside him folder and dragging the PC Mail subfolder to the mail folder in the Mac profile. I think I am way over my head here; I really want to solve the problem, so I can mothball the PC. Thanks is advance for your help.

  OK, the ini file will be

  MacHD>Users>RKW (me)>Library>Thunderbird
  

  The profile folder will be in MacHD > users > RKW (me) > library > Thunderbird > profiles with a name like d1234pg. By default. When copying content. It is this lower level folder called. Not MacHD > users > RKW (me) > library > Thunderbird > profiles.

  To simplify a little (I hope so.

  Install Thunderbird. go to the Help menu in Thunderbird and select troubleshooting information.
  In this tab, click on the button show the frlder for the profile.
  Finder will open with the open current profile folder.
  Close Thunderbird.

  Now, locate the old profile folder, it will be contains pref.js as a file among many others.
  Copy the files and folder to this folder, and place them in the new folder Thunderbird open in the Finder for you. To replace the files.

  Open Thunderbird and you should have it all.

• Issues - his sound is moved from external sources to portable speakers when in a call

  So, I had this problem for quite a while now - what happens is when I receive a Skype call and continue to play a game, listen to music, watch a video, nothing that involves her; this noise is moved from my headphonees/speakers to my crappy Laptop speakers. I want that all my sounds playing through the computer source from one office and Skype. How would I do that?

  Try this:

  http://community.Skype.com/T5/Windows-desktop-client/Skype-audio-splits-to-both-headphones-and-speak...

• How is "Guest network" differs from the main network?

  I just purchased and installed a refurbished Airport Express. Everything works fine. In the installation program, it gave me the opportunity to create a network of comments, which I did and it works. My question: How is this different guest network from my main network?

  "Guests" that connect to the network comments can only access the Internet.  They cannot "see" devices on your main or private network.

  So if you want to not "invited" to see your personal devices and possibly see your private data on your computer or computers on your private network... or... you don't want to give "guest" password to your network private... it makes sense to leave the 'invited' to use the guest network.

• HP Officejet Pro 8500 has: WIFI connection to printer after moving from a computer in another city

  I recently moved from Nevada to California with my printer.  I can't go to the printer.  The wireless light is lite. The printer has worked with this computer I Nevada. Promp in window says "printer is unable to connect to the server.

  "You can connect to the server through a proxy server" what is a proxy server address

  Hi @Raggetty ,

  I understand that you are having problems with the printer via the wireless network. I will definitely do my best to help you.

  Since you have moved, you must install the printer on the network.

  If you haven't already done so, restore the default settings of the network printer. Go to configuration, network, restore default network.

  Then set up the printer on the network again.

  Follow this document:

  Configure the printer to a wired network or wireless for the HP Officejet Pro 8500 has e-all-in-One Printer Series.

  If you need help to set up the printer on the network, let me know.

  Good day!
  Thank you.

• PC running XP - how to file from the domain network

  Hello

  I have a PC that cannot be upgraded to Windows 7 and must remain under XP. However since XP is out-of-support I don't want him make them vulnerable to other PCs on the domain network. How to get the PC from the domain network? Is there a way to do this to make sure that it is not reached the domain network?

  Thank you!

  Be joined or not joined to the domain will do all the other machines on the network more or less safe.  Join domain is not separated in this way: the XP machine will always be on the network even if it is not a member of the domain.

  But if you still want to take this action, you can do it from the System Properties dialog box by choosing a workgroup instead of a domain.  You can also open Group Policy Manager and refuse to join a domain, but given that only an administrator can do anyway, which is probably not necessary.