Msconfig does not start when typed into the starting box?

Similar Questions

• NotifyIcon() does not work when integrated into the application (.exe)

  Hey everybody,

  I use the NotifyIcon() of System.Windows.Forms.dll (.NET 2.0) to create a menu for the handling of an application. I started work with the example shown here http://zone.ni.com/devzone/cda/epd/p/id/3915and the code works when running in the IDE of LabVIEW.

  However, when I build the code in an executable file, the icon not during execution. Someone has an idea of what could be the problem?

  My code is still very messy (still in try-everything-and-see-what-works phase), so I will clean it before returning and detachment.

  For reference, I'm doing a system-tray only monitor for a NI DAQ 6009. Program begins in the system tray and begins to record data. The user can right click to display the main window where he can change the interval plots or update view.

  OK, I got it working!

  It turns out that I had a few errors:

  1. when I copied on the System.Windows.Forms.dll, I also need to copy System.Drawing.dll because I used during the creation of the icon.

  2. I had the .dll files in the build directory, but I forgot to include the icons used by the program.

  It turns out that the NotifyIcon() has been called, but a picture of the icon was never created! So why I couldn't see it...

• DeskJet 3632: Does not work when plugged into the laptop

  When my printer is not plugged, it is all set up and ready to print. But when I plug it into my laptop, the button just flashes, all other buttons are not on and the screen is blank as well as this, it is not picked up at all of my laptop.

  If anyone has an idea why it continues to be please help! Thank you

  Hi @Jademercer,

  Thank you for joining the HP Forums!

  I understand that you get a white screen and the button flashes with your printer HP Deskjet 3632. I'm happy to help you!

  Are you able to print a test page without the printer being connected to the computer?

  Print a test page to make sure that the equipment is working properly.

  1. Make sure that there is no US letter or A4 size, unused, plain paper in the input tray.

  2. Press and hold the power button / , then press the Cancel button .

  3. Release the button cancel, then the power button.

     The test page will print.

     Figure: Example of a test page

     

  In the meantime, please take a look at this guide, the lights flash.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope hear from you soon!

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• Screen saver does not react when I "wiggle" the mouse or press "Esc"; 'Enter', etc.

  I had the same screen saver running for centuries (it goes right through my photos), but in the last few weeks, I am unable to find the screen to 'wake up' 'wiggle' of the mouse or press "Esc"; 'Enter' etc etc.  Its very frustrating because I have to press several keys at random and then wait about 5 minutes for the screen saver turns off.  I'm still on Windows 7 and it is up to date.

  No idea how to get the screensaver to respond normally again?

  Hi Christine,

  I understand that your computer screen saver does not react when you move the mouse or press ESC.

  This problem may be due to the following reasons:

  • Several processes that run in the background.
  • Problem with screen saver.

  Please follow the methods and check them off below if it helps:

  Method 1: Clean boot

  IF this problem is caused by several programs running in the background, clean boot will help you understand.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows
  

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Method 2: Change the default screen saver

  Please refer to the following article which will help you change the wallpaper and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/change-screen-saver

  Hope this information helps, for assistance please answer.

• SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

  SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

  I can open the SG of start menu/desktop computer and I can open the PP project in SG very well. The PP project contains 3 deadlines and I take one I want without any problem. Returning to the SG PP works fine as well. It seems only thing doesn't work does not automatically open the PP file and selecting the correct timeline in the Official Journal of the project.

  I had a glance at the "C:\Users\john Bishop images\AppData\Roaming\Adobe\SpeedGrade\8.0\logs\SpeedGrade.log ' but it is not updated when I try to use the link Direct from PP. command It updated when I invoke the start menu/desktop computer SG. Note that none of the other newspaper, the files are updated either (Plugin Loading.log, Database.txt Trace and Debug Database.txt). All these get updated when I run the desktop/start. It would appear that SG is not yet known.

  I uninstalled the SG and the PP and re-installed (all in the directories by default) and everything seemed to go OK but no change.

  I also added 2 political profile the NVIDIA Control Panel, just display a message when loading SpeedGrade.exe and another for a slightly different message when loading SpeedGradeCmd.exe. SG invoking the desktop/start causes the SpeedGrade.exe message to display. Using the 'Direct link' PP file option does not display anything, reinforcing my thought that SG is just never called from PP.

  SP1 Windows 7 Professional 64 bit

  12 GB OF RAM

  2-Intel Xeon E5640 (16 sons) processors

  NVIDIA GeForce GTX580 1536 MB memory graphics

  PS... I used the Adobe cleaning tool noted elsewhere and tried NVIDIA workarounds as well - all to nothing does not.

  Problem solved!

  My Antivirus software was in the way. Once I have updated, things work fine.

  Thanks for your help!

• The slider side does not move when I put the mouse on it, I need to click below or on the arrow down. Once he left the first place, it moves. Also some applications like changing the city the weather button won't change.

  The slider side does not move when I put the mouse on it, I need to click below or on the arrow down. Once he left the first place, it moves. Also some applications like changing the city the weather button won't change.

  The extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game. __Keyboard is very good

  Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
  Keyboard is fine.  Is this a compatibility issue?

  ---------------

• My cd-writer/DVD disc tray does not open when I press the Open button. He is not blocked and has no disk in it. How can I me t to operate?

  Cd-writer/DVD disc tray does not open when you press the Open button, or when you use the buttons to control the media on the keyboard. How can I restore it to its operating state?

  Hi John,.

  Please let me know exactly what happened when you tried my suggestions of first and second.

  Of your most recent post, looks like you're watching the wrong part of the Device Manager. Optical drive is listed under "readers of CD-ROM/DVD-ROM". The info you gave appear under "drives". If the drive is not listed under "readers of CD-ROM/DVD-ROM" or there is no such section in Device Manager, then Windows do not see. If windows can't see it then this means that there is no power or that the drive is broken.

  When you pushed the drive back in, the player no longer has much of the book or did you have to push all the way. If the latter, it means that the drive has no power or is broken.

  With respect to the opening of the case, I guess I should ask first if it's a laptop or desktop?

  Tricky

• In Outlook Express, when I type in the first letter of an e-mail address that is in my contacts, the dropdown does not close when I click the right address.

  Original title:

  Under XP, when I type in the first letter of an e-mail address that is in my contacts, the dropdown does not close when I click the right address. What a nuisance! Also, when I go to create a new e-mail message, an address of my contacts appears in no particular place, making it impossible to complete the message.

  Hello

  I suggest you turn off Auto complete and then check if you face the same problem.

  a. open Outlook Express.

  b. click on Tools.

  c. click on Options.

  d. click the send tab.

  e. uncheck the e-mail address automatically complete when composing box.

  f. click OK.

  Turn Auto complete and test again to see if the behavior is better. To activate it again, follow the same steps as above, but put a check mark in the box.

• Acer toggle display does not display when you use the Fn + F5 key secret on my Acer Aspire 5560

  What it does:

  When you use the Fn + F5 key combination on my Acer Aspire 5560, it brings up a screen changes on the laptop screen for the selection of an external monitor, I am currently using Windows 7 Ulitmate

  Before the problem:

  Display mode switch Acer existed prior to the upgrades of the drivers

  The problem:

  The toggle screen Acer does not display when you use the Fn + F5 key secret on my Acer Aspire 5560?

  Additon Information needed to solve the problem or any other information:

  I would like to know what driver or software operates the Acer toggle display Mode?

  Also where can I find this driver for computer: Acer Aspire 5560 to bring this Acer toggle display Mode function?

  Acer Toggle display Mode: this is a picture of it when you use the Fn + F5 combination:

  

  Thank you very much Ironfly Ace, it has worked Acer hero of the day

• Hello! The Creative cloud program does not. When you open the file in Photoshop says that there are not many fonts, use Typekit. Typekit itself turned off. All programs downloaded and saved, but Photoshop doesn't see Typekit. What should do? Also says I h

  Hello!

  The Creative cloud program does not. When you open the file in Photoshop says that there are not many fonts, use Typekit. Typekit itself turned off. All programs downloaded and saved, but Photoshop doesn't see Typekit. What should do?

  Also says that I have no access to this service. For access, please contact your COMPUTER administrator or connect using the ID

  Hello

  Greetings!

  Is Typekit on?

  Visit this link: Add to your desktop of Typekit fonts

  Concerning

  Jitendra

• I have added a hyperlink which is a file video .mp4 but it does not work when I generate the document.

  I have added a hyperlink which is a file video .mp4 but it does not work when I generate the document.

  Hello

  Do you use the WebHelp for the CHM converter script? If so, this screenshot may seem reasonable. If this is not the case, this isn't out CHM.

• Foreground color does not change when I use the color picker.  CS6.

  Foreground color does not change when I use the color picker.  CS6.

  Your document is in grayscale, convert color (Image > Mode).

• Why my Muse formatting does not disappear when I open the site in DW CS6? I need to change the PayPal shopping cart code to account for my shipping options. I exported the Muse test in a folder and then created a new Site in DW using this file, so any CSS

  Why my Muse formatting does not disappear when I open the site in DW CS6? I need to change the PayPal shopping cart code to account for my shipping options. I exported the Muse test in a folder and then created a new Site in DW with the help of this file, so all CSS should be there, but I don't see on the page about the elements without formatting, any stop to the left. Thank you!

  PS: Muse will be the most impressive program ever when they fix these bugs or drop because not every user will be paying through the nose for Business Catalyst. Grrrrrrrrr.

  Best approach would be not to use the PayPal widget and instead copy and paste the PayPal code embedded in an object > object to insert the HTML in Muse. This way you can edit the HTML code to embed PayPal code from Muse and without having to modify the exported code.