Much smaller than the original file size

Similar Questions

• Exported mp4 or flv was much smaller than the original frame size

  Don't know if I started the project in the wrong way, or if I do something wrong when I export.

  My file is a mp4 fps 29,87 Hz 44 100, 16-bit stereo.

  480 x 360

  When I export to flv or mp4, the image is the size of a postage stamp, a huge black border.

  Any help would be appreciated.

  I've had enough of export and flv.

  Martin

  P.S. I would size exported to about 390 x 214 or something a little less than 400 wide.

  Michael,

  When I went to export the original showed to 720 x 480 when he does it is 480 x 360, and I don't know why that is.

  I have been unable to enter in 480 x 360 opening custom predefined because it was "grey".

  The problem here is that you have chosen a DV Preset sequence/project. There is no possibility to customize these settings. Instead, you must choose the preset of office, and then the attributes won't be grey, but adjustable. The name 'Office' is not the ultimate and I would have named it "Custom", instead, but that's just me.

  Once you have set up the project / the sequence on the desktop and customize the size of the image, many questions will disappear.

  Good luck

  Hunt

• Why is my file size "Combined PDF" smaller than the original files?

  Hello!

  I try to combine two individual PDF files into a single PDF file. Each file is 32 MB, but when I use acrobat to combine, the newly created "combined" file is only 19 MB. I think I took the necessary steps to ensure no degradation that happens (e.g. large selection size of the file in the Panel options), but I'm still puzzled as to how the two files can be set up as one and be smaller than the two separate files with out any compression. What Miss me?

  Thanks in advance!

  When you combine a file, it performs an operation of "save under".  This rewrites all the PDF object in the single file and is supposed to clean the file, while the single files may have had several saves which when you look at the inner workings of the PDF file simply add at the end of the file.  In other words, you get a file more cleanly written and optimized is also recorded for a quick display of Web pages.

• Capacity of data store poster now much smaller than the original configuration

  Hi all

  I have my new configuration of server DELL R710 - 2 x 146 GB drives in the server on a RAID 1, connected to an MD1000 with 10x146GB in a RAID 10 SAS drives, and 5 x 750 GB SAS drives in a RAID 5.  My controllers RAID show each virtual table as you would expect to see the ability, however, VMware now shows my RAID 5 744 GB data store, instead of the 2.5 to he showed last night!  My VM on this data store seems solid, but I have no idea where my ability went.   I'm under ESXi 4 - free Version.

  What can I do to recover this loss of capacity?

  ESX (i) has a limit of 2 TB LUN and with ESXi you end up with the rest of storage after have been subtracted portions of 2 TB (i.e. TB 4.7 LUN donnerait.7 TB of storage (4: 7 - 2.0 - 2.0)).  With most of the controllers, you can create multiple LUNS on the same disks that you can use the complete storage if you create 2-Bay RAID 5 on the 750 GB drives.

  Dave

  VMware communities user moderator

  New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

  You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

• Split larger than the Original file

  I have a big document of 900 pages. Its size is 20 MB. I divide it into two files of 450 pages each by using the command Split Document in Acrobat 9.1.0. The two files were each larger thant and the original document. They were 30 MB each. I then tried to create two separate documents by removing the last 450 pages in the original document using the command delete Pages and saving it as a new file. I did the same thing with the first 450 pages. Both files were 7 MB each. Together, they are much smaller than the original file - 14MB vs 20 MB.

  What is going on? How can I be sure that slot records are accurate?

  Thank you

  Jon

  Try to file > save as (Save NOT only) on the original file of 20 MB. (Never use any file > save if try to do a small file)

  What is the size of the file is saved like that?

  (I have never used Split Pages, don't know how it works).

• "this computer's hard drive is smaller than the original hard drive shipped.

  Computer model: p7-1058uk Hi, I'm trying to reinstall my windows recovery kit 7 I bought from best2serve my OCZ Vertex 60 GB ssd Series 3. But I get this error message "this computer's hard drive is smaller than the original supplied hard disk. The recovery process cannot continue"I actually managed to install this recovery on the same front drive kit when I bought first. Any ideas as to why its not working now? I have formatted the ssd drive, deleted the partition and creates a new one with a program called gparted. I can't access my computer until I can reinstall this recovery again kit. Thank you

  Hello:

  I'm surprised that the same recovery disks set worked the first time.  Unfortunately, the error you are getting is the norm. I don't know any solution other than to get a bigger hard drive to the approximate size as the original.

  I have a solution for you if you want to use...

  If you can read the product key 25 character Windows 7 on the sticker COST Microsoft on your PC, you can download single files Windows 7 ISO to burn it to a DVD for the version of windows (Pro, home) that is installed on your PC, and which is listed on the sticker COST Microsoft on the PC.

  You must also select the language installation provided with your PC, or the product key will not work.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program.

  Use the 25-character product key to activate the installation. It's good for the 32-bit or 64-bit version of W7.

  Then go to the support page and drivers for your PC install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• I have created a multi-page document in inDesign and exported in PDF format.  The original file size is 13.27 mb.  I used the command size reduced to 2.86 to the file to download on the internet.  However, one of the images in the original pdf file does n

  I have created a multi-page document in inDesign and exported in PDF format.  The original file size is 13.27 mb.  I used the command size reduced to 2.86 to the file to download on the internet.  However, one of the images in the original pdf file does not appear in the smaller file.  Can someone help me?

  Try the PDF tool optimize.

• Photoshop brush strokes are much smaller than the slider, need to do the same thing.

  My photoshop brush, pencil and duplicate tracks are smaller than the slider, making it very difficult for accuracy. Do not know what made them change, but you want the slider and the strokes are the same.

  

  I tried different settings in the dialog box of the brushes, with parameters of advanced differenc, etc., without any result. Also, tried different settings of the preferences/slider. No luck.

  Help!

  In the preferences (cmd-k) > cursors > painting, the parameter sliders should be Normal.

  'Reset tools' as described in the habit of posting 1 help. Have you tried yet?

  Gene

• VMware Workstation is unable to open one of the virtual disks required by this virtual machine because it is larger than the maximum file size supported by the host file system.

  I'm transitioning from Windows XP (64-bit) on a new computer with Windows 7 installed.  I undertook to VMWare Workstation 6 7.0.1 in the process.  The problem is with a very large RAID 5 volume on the new system.  It's a score of 5.45 TB (TPG and NTFS).

  When I try to start a virtual machine on this volume, I get the message "VMware Workstation cannot open one of the virtual disks required by this virtual machine because it is larger than the maximum size of the files supported by the host file system.".  This is obviously not true.  If I copy the virtual machine to another drive on the system, it starts without a problem.

  Anyone have any ideas on how to work around this problem?

  try to add this line in the vmx file:

  diskLib.sparseMaxFileSizeCheck = "false".

  Maybe it helps.

  VMDK-type do you use?

  monolithicSparse? -C' is the only part type more?

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Registration in PNG is much worse than the original image quality.

  I made a transparent PNG logo, and when I go to record the new transparent logo in PNG format, the quality has decreased significantly from the original. I did nothing more than to remove the background of the logo, why this is happening in a lossless format? What can I do to solve this problem or to increase the quality of the logo transparent?

  Not a perfect solution, but once you remove the background of the first, go layer > Carpet > fringe (or remove white matte suited). Then save for Web as a PNG 24.

  But, ideally, you want to rebuild as a separate vector file from a background.

  Is there a way I can recreate it on mine?

  If you know the police, it should be easy to build. I don't know if the "tr" ligature is a glyph, or if it has been made especially for this logo.

• imported video is smaller than the original

  When I import videos from legacy video is not in the original format.  The video seems to be cropped, not only NOT wide, but the edges are cut off.

  Search for the term, "pixel aspect ratio compensation."

• Much smaller than the partition of VMWare Windows disk size

  I was installing a program Windows in what I thought was a lot of hard - a total of 75 GB disk space - when suddenly, I discovered that my Windows space was approximately 55 concerts unless I assigned in Fusion.  In my computer, I right click on the C drive, and the displayed graph said how I had a total capacity on the C drive of 19.9 Go with 2.6 GB free.  Still in my VM settings it says that I have awarded 75 GB of space for Windows.   How to explain this huge discrepancy?  The calculation has only 320 gig drive.  What - is - it possible to - move my WIndows partition on a hard drive external?

  Screen clamps attached so that maybe you can spot something I am not understanding correcly.

  Take a look at: resizing of the ramdisks with step by step Instructions

• The screen is smaller than the size of the screen. Help!

  I hit a button on an accident (CTRL with Shift or CTRL with something else) and the screen went black. Now, the screen size is much much smaller than the size of the screen. There is a good inch margin 2 right and left. How can I return the screen to normal size (to match the screen)?

  Hi Rhamad,

  Thank you for visiting Windows Vista Microsoft answers forum.

  Your monitor settings have been changed, and you must set its value by default. To set the default settings screen, you must use the buttons near the power of the monitor buttons. You can take the help of the manufacturer of your computer to do or if any manual was provided with the computer then you can refer to that as well.

  You also try to open graphics settings and change the display settings.

  To change the display settings, follow the steps below:

  1. the right in the empty space on the desktop and select Properties. 2. click on the settings tab. 3. click on advanced. 4. click on the tab on your computer graphics card. 5. you will need to make changes in the advanced settings under display settings.

  Alternatively, you can perform a system restore to a date when the display settings were normal.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue. 2. in the System Restore dialog box, click on choose a different restore point and then click Next. 3. in the list of restore points, click a restore point created before you started having the problem, and then click Next. 4. click on finish. You can visit the link to the KB Article for reference: http://support.Microsoft.com/kb/936212

  Please let us know if it helps.

  Thank you and best regards,
  David

• size smaller than the smallest brush, you can choose?

  is it possible to have the smaller than the smallest brush size, which you can choose? BTW should be smaller size of the brush to choose.

  Hi all

  The latest version of animate CC allows to choose from a wide range of sizes of brush along with other improvements

  See here: new feature summary (June and August 2016)

  Improvements to the Brush tool in animate CC

  Download latest update CC animate via Creative Cloud application and try it!

• new cDAQ-9178 chassis was smaller than the cDAQ-9172 old buffer?

  Digital waveform features:

  Waveform acquisition (DI) FIFO for cDAQ-9172: 2047 samples

  Waveform acquisition (DI) FIFO for cDAQ-9178: 127 samples per slot

  This means that the new HW (9178) has a much smaller than the old buffer (9172)!

  I want to run a correlation over generation/acquisition at 2 MHz with 2000 samples. Does this mean that the new chassis will not be able to acquire the whole of the data (I use a NI 9401 module inside the chassis)?

  FIFO sizes are misleading and not a true indicator of the chassis supporting the streaming is not the single buffer.  We did some tests comparing the latest and cDAQ-9172 chassis.  You will not notice the difference, especially with your application to a finished task of 2 000 samples at 2 MHz.  With 2 000 samples, you can run your DI task on your chassis cDAQ-9178 at 10 MHz if you wanted without problem (don't try with continuous or even finished tasks).

  The only time where the FIFO size really comes into play is when you run a primary task at high rates, say > 5 MHz, even if it is system dependent.  At these speeds a FIFO that is deeper 2 000 samples you buy only tens or hundreds of additional microseconds when Windows jitter is measured in milliseconds.

  I would be very surprised if there is a practical application that worked on a cDAQ-9172 chassis which did not work on newer USB cDAQ chassis.