imported video is smaller than the original

Similar Questions

• "this computer's hard drive is smaller than the original hard drive shipped.

  Computer model: p7-1058uk Hi, I'm trying to reinstall my windows recovery kit 7 I bought from best2serve my OCZ Vertex 60 GB ssd Series 3. But I get this error message "this computer's hard drive is smaller than the original supplied hard disk. The recovery process cannot continue"I actually managed to install this recovery on the same front drive kit when I bought first. Any ideas as to why its not working now? I have formatted the ssd drive, deleted the partition and creates a new one with a program called gparted. I can't access my computer until I can reinstall this recovery again kit. Thank you

  Hello:

  I'm surprised that the same recovery disks set worked the first time.  Unfortunately, the error you are getting is the norm. I don't know any solution other than to get a bigger hard drive to the approximate size as the original.

  I have a solution for you if you want to use...

  If you can read the product key 25 character Windows 7 on the sticker COST Microsoft on your PC, you can download single files Windows 7 ISO to burn it to a DVD for the version of windows (Pro, home) that is installed on your PC, and which is listed on the sticker COST Microsoft on the PC.

  You must also select the language installation provided with your PC, or the product key will not work.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program.

  Use the 25-character product key to activate the installation. It's good for the 32-bit or 64-bit version of W7.

  Then go to the support page and drivers for your PC install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Why is my file size "Combined PDF" smaller than the original files?

  Hello!

  I try to combine two individual PDF files into a single PDF file. Each file is 32 MB, but when I use acrobat to combine, the newly created "combined" file is only 19 MB. I think I took the necessary steps to ensure no degradation that happens (e.g. large selection size of the file in the Panel options), but I'm still puzzled as to how the two files can be set up as one and be smaller than the two separate files with out any compression. What Miss me?

  Thanks in advance!

  When you combine a file, it performs an operation of "save under".  This rewrites all the PDF object in the single file and is supposed to clean the file, while the single files may have had several saves which when you look at the inner workings of the PDF file simply add at the end of the file.  In other words, you get a file more cleanly written and optimized is also recorded for a quick display of Web pages.

• Exported mp4 or flv was much smaller than the original frame size

  Don't know if I started the project in the wrong way, or if I do something wrong when I export.

  My file is a mp4 fps 29,87 Hz 44 100, 16-bit stereo.

  480 x 360

  When I export to flv or mp4, the image is the size of a postage stamp, a huge black border.

  Any help would be appreciated.

  I've had enough of export and flv.

  Martin

  P.S. I would size exported to about 390 x 214 or something a little less than 400 wide.

  Michael,

  When I went to export the original showed to 720 x 480 when he does it is 480 x 360, and I don't know why that is.

  I have been unable to enter in 480 x 360 opening custom predefined because it was "grey".

  The problem here is that you have chosen a DV Preset sequence/project. There is no possibility to customize these settings. Instead, you must choose the preset of office, and then the attributes won't be grey, but adjustable. The name 'Office' is not the ultimate and I would have named it "Custom", instead, but that's just me.

  Once you have set up the project / the sequence on the desktop and customize the size of the image, many questions will disappear.

  Good luck

  Hunt

• Much smaller than the original file size

  When I import a picture of 4MB, and then save it, it seems that the size of the image is about 100 k or less? How to avoid them shrink the file so much? Is there a default size of the project or something?

  Hi howebizarre,

  PS Touch support to work with images to the maximum dimensions of 1600 x 1600, who once saved as a JPEG with a quality higher still in the vicinity of 1 MB. You resize the images to work within the correct software? I would recommend making sure that you have installed the 1.1.1 update too, she understood some updates to save the settings of quality higher when recording to the tablet.

  Hope that helps,

  -Dave

• Imported slides are smaller than the originals

  I have problems with importing project file. When I import the Captivate slides in a project to another, the imported slide has been reduced in size and no longer fits. While I can adjust the objects, the background format cannot.
  
  They are not PowerPoint presentations, they are .cp files. Cannot find a solution or settings in Captivate to control this. Help would be greatly appreciated.

  Thank you very much for your efforts! You are right on it, Rick! You would not believe how much time I spent on this issue. I had to teach me this program and size/resolution is not something I picked up again.

  Do you have a recommendation for a good checklist or guide? We have site licenses and installation does not come with any instructions. Once again, thanks a lot.

  Have a good holiday!

  Jon Wakser
  Philips - Medical Systems Division

• Capacity of data store poster now much smaller than the original configuration

  Hi all

  I have my new configuration of server DELL R710 - 2 x 146 GB drives in the server on a RAID 1, connected to an MD1000 with 10x146GB in a RAID 10 SAS drives, and 5 x 750 GB SAS drives in a RAID 5.  My controllers RAID show each virtual table as you would expect to see the ability, however, VMware now shows my RAID 5 744 GB data store, instead of the 2.5 to he showed last night!  My VM on this data store seems solid, but I have no idea where my ability went.   I'm under ESXi 4 - free Version.

  What can I do to recover this loss of capacity?

  ESX (i) has a limit of 2 TB LUN and with ESXi you end up with the rest of storage after have been subtracted portions of 2 TB (i.e. TB 4.7 LUN donnerait.7 TB of storage (4: 7 - 2.0 - 2.0)).  With most of the controllers, you can create multiple LUNS on the same disks that you can use the complete storage if you create 2-Bay RAID 5 on the 750 GB drives.

  Dave

  VMware communities user moderator

  New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

  You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

• Lightroom displays files and exports darker than the original or Photoshop files

  Hi all.

  Let me first preface this by saying I'm not technical interest, and I know nothing (or very little) of CHF etc. profiles.

  But suppose a person will try to tell me to do something with them in a really technical way that I don't understand, please treat me like a child of 4 years in this regard.

  I use Lightroom 5.6 on a Mac under 10.9.4 I Photoshop CS6 and fitted with a calibration Spyder 3pro device and all the Adobe programs linked to the exit of calibration to ensure 'if all is well' quality control.

  I recently was analog film scanning and this import in Lightroom 5. I noticed that the file import always seems darker than the original.

  When I exported from Lightroom, them they look like shit.

  There were no imports of additional parameters because they are all extinct. I did when I installed LR.

  I also noticed that whenever I imported a Raw file for some reason, on the original file would look great for a second then when clicked would change to something less attractive. But I digress.

  So try to show what's happening. I created some images to illustrate my problem.

  Also, it doesn't matter if I turn the proofing or disable.

  Lightroom Softproof on

  

  Lightroom Softproof off

  

  Vs Lightroom Photoshop histogram - very similar

  

  Left: file opened from Lightroom as the Original right: original Photoshop file

  

  Left: file open an export from Lightroom right: original Photoshop file

  

  Clues because it is very annoying and yet 5 Lightroom unusable.

  These files are probably in grayscale without an included icc profile. Photoshop, using the parameters that show you will pay 15% dot gain profile. Lightroom assumes the sRGB which is much more mixed. You can see this difference in the massively different histograms. What you need to do is save the file from Photoshop with included icc profile. Lightroom should display the same.

  Note a bug of color management nasty exist in Lightroom on Mavericks in the Panel to develop: Jao photo blog: quantification of the problem of management of the Mavericks color also which make the deep shadows Cap upward.

• Split larger than the Original file

  I have a big document of 900 pages. Its size is 20 MB. I divide it into two files of 450 pages each by using the command Split Document in Acrobat 9.1.0. The two files were each larger thant and the original document. They were 30 MB each. I then tried to create two separate documents by removing the last 450 pages in the original document using the command delete Pages and saving it as a new file. I did the same thing with the first 450 pages. Both files were 7 MB each. Together, they are much smaller than the original file - 14MB vs 20 MB.

  What is going on? How can I be sure that slot records are accurate?

  Thank you

  Jon

  Try to file > save as (Save NOT only) on the original file of 20 MB. (Never use any file > save if try to do a small file)

  What is the size of the file is saved like that?

  (I have never used Split Pages, don't know how it works).

• slower and later than the original videos

  I put a video in After Effects CS6 and I did nothing to edit it.  I made the video and the video was slower and later than the original.  How can I increase the quality of my videos?  Thank you!!!

  FAQ: Why my huge output file, and why not playing smoothly?

• The buffer is smaller than the specified size.

  Has done a session of webniar via GoToWebinar, that has been saved as a Windows Media audio/video file. It has been downloaded to my desktop without problem, and the original file plays on Windows Media player. I need to send the session recorded with colleagues across the Canada. It's a big file to 55.5 MB, I usually use YouSendIt.com and have done so successfully with the same type of files in the recent past. This time, when I send the file and download it via YouSendIt, it records on my desk in a 55.5 MB file with the correct file name, but when I try to open this file, I get an error message: "the buffer is smaller than the specified size. Any ideas on what may be the problem. How this can be solved?

  Best regards

  Deborah

  I do not have the fix for YouSendIt, but it may be worth trying to
  Download your file on SendSpace... then just send download
  link to your recipients and they can download the file to their
  own convenience.

  "SendSpace.
  http://www.sendspace.com/

  It's very simple... of the SendSpace site steps
  are just what you have to do.

  On the left, click on the Browse button and it will open a window which
  allows you to access the files on your hard drive.

  Go to your video file and select it.

  On the left, click on the download button.

  When the download link appears... left click on the copy button.

  Share this link with your recipients.

• Problem w / window size is smaller than the size of the screen

  I recently had an automatic installation of Vista sp.  Don't know what version/sp.  After restarting my laptop, the window size is now smaller than the window size of the screen.  It looks like HD video with a 1 1/2 in. vertical black band on the left and right side of the screen.  How can I fix it?

  Hello

  Have you tried to adjust the resolution in the settings of the Control Panel/customize / display? If there is only limited adjustments available, you will probably need to reinstall or update your graphics card driver. This is best done with a download of the manufacturer of the device, not windows update. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• is the new Apple Watch series1have the same S1 processor than the original

  Is the new Apple Watch series1 have the same S1 processor than the original?

  Hello

  The Apple Watch series 1 has a new processor dual-core S1P and GPU, which is up to 50% faster than the original Apple Watch.

• new cDAQ-9178 chassis was smaller than the cDAQ-9172 old buffer?

  Digital waveform features:

  Waveform acquisition (DI) FIFO for cDAQ-9172: 2047 samples

  Waveform acquisition (DI) FIFO for cDAQ-9178: 127 samples per slot

  This means that the new HW (9178) has a much smaller than the old buffer (9172)!

  I want to run a correlation over generation/acquisition at 2 MHz with 2000 samples. Does this mean that the new chassis will not be able to acquire the whole of the data (I use a NI 9401 module inside the chassis)?

  FIFO sizes are misleading and not a true indicator of the chassis supporting the streaming is not the single buffer.  We did some tests comparing the latest and cDAQ-9172 chassis.  You will not notice the difference, especially with your application to a finished task of 2 000 samples at 2 MHz.  With 2 000 samples, you can run your DI task on your chassis cDAQ-9178 at 10 MHz if you wanted without problem (don't try with continuous or even finished tasks).

  The only time where the FIFO size really comes into play is when you run a primary task at high rates, say > 5 MHz, even if it is system dependent.  At these speeds a FIFO that is deeper 2 000 samples you buy only tens or hundreds of additional microseconds when Windows jitter is measured in milliseconds.

  I would be very surprised if there is a practical application that worked on a cDAQ-9172 chassis which did not work on newer USB cDAQ chassis.

• The screen is smaller than the size of the screen. Help!

  I hit a button on an accident (CTRL with Shift or CTRL with something else) and the screen went black. Now, the screen size is much much smaller than the size of the screen. There is a good inch margin 2 right and left. How can I return the screen to normal size (to match the screen)?

  Hi Rhamad,

  Thank you for visiting Windows Vista Microsoft answers forum.

  Your monitor settings have been changed, and you must set its value by default. To set the default settings screen, you must use the buttons near the power of the monitor buttons. You can take the help of the manufacturer of your computer to do or if any manual was provided with the computer then you can refer to that as well.

  You also try to open graphics settings and change the display settings.

  To change the display settings, follow the steps below:

  1. the right in the empty space on the desktop and select Properties. 2. click on the settings tab. 3. click on advanced. 4. click on the tab on your computer graphics card. 5. you will need to make changes in the advanced settings under display settings.

  Alternatively, you can perform a system restore to a date when the display settings were normal.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue. 2. in the System Restore dialog box, click on choose a different restore point and then click Next. 3. in the list of restore points, click a restore point created before you started having the problem, and then click Next. 4. click on finish. You can visit the link to the KB Article for reference: http://support.Microsoft.com/kb/936212

  Please let us know if it helps.

  Thank you and best regards,
  David