Multiple column headers in a single DataGrid?
Suppose I want to view information on, say, invoices.
So I want to display some of my DataGrid with only bills from the last 30 days, the next section for 30 to 60 days, and the third section is 90 days + old.
I want it to look, basically, like this:
30 days or less
Old customer amount days
Mr. X 15 20,76 of cleaning
7-11 3 7.11
aged from 30 to 60 days
Old customer amount days
75 12.34 Barney
Parts don't 80 1200.89 workshop
90 days or more
Old customer amount days
Sprint 144 30.63
Is it possible to do in a single DataGrid? I want mulitple columns headers, but want to be able to get rid of them and combine all these data into a simple DataGrid with all invoices, if need be. In this case, all except the upper column heading titles would disappear.
Any info on this is appreciated.
Thank you!
Hello
You can do with advance datagrid grouping.
http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=advdatagrid_02.html
Rgds
Johnny
Tags: Flex
Similar Questions
-
Hello
I use InDesign CS5.5. I'm working on a newsletter that has multiple pages, each page uses blue as the color of the title. I would change all the blue of a different color. Is it possible to do it all at once instead of going to each individual?
Jewelee
Thank you very much! The 3rd solution is what I was looking for!
-
Update multiple columns from multiple tables in a single UPDATE request
Hello
I'm trying to figure if I'm heading in the right direction.
I want to update multiple columns from multiple tables in a single UPDATE request. Also, I would like to update multiple columns in a table from the tables.
Scenario 1
UPDATE Table2, Table 3 SET T2.Column1 = T1.Column1 ,T2.Column2 = T1.Column2 ,T3.Column2 = T1.Column2 FROM Table1 T1, Table2 T2, Table3 T3 WHERE T1.id = T2.id and T1.id = T3.id
Scenario 2
UPDATE Table3 SET T3.Column1 = T1.Column1 T3.Column2 = T1.Column2 ,T3.Column3 = T2.Column3 ,T3.Column4 = T2.Column4 FROM Table1 T1, Table2 T2, Table3 T3 WHERE T3.id = T1.id and T3.id = T2.id
Hello
For scenario 1, you must write separate instructions UPDATE table2 and table3.
To guard against someone else change one of these tables while you act so you can copy all relevant data in a global temporary table and update this global temporary table table3.
ENGAGE only when two tables have been changed.
You can write a procedure or an INSTEAD OF trigger to do all this.
For scenario 2, you can reference many tables that you need when new table3. It might be more efficient and simpler to use the MERGER rather than UPDATED. For example:
MERGE INTO table3 dst
WITH THE HELP OF)
SELECT t1.id
t1.column1
t1.column2
t2.column3
t2.column4
FROM table1 t1
JOIN table2 t2 ON t1.id = t2.id
) src
WE (dst.id = src_id
WHEN MATCHED THEN UPDATE
SET dst.column1 = src.column1
dst.column2 = src.column2,
dst.column3 = src.column3,
dst.column4 = src.column4,
;
-
Sort order incorrect in datagrid sort multiple columns
Hello
I'm a little confused about sort multiple columns in a datagrid. The following code sorts, but not the sort, I expect or what you are doing the thing about a coming O alphabetically before or after P. In my opinion, the code must sort stadt, vname by clicking on the city column, and name, the VNAME by clicking on the column name, but obviously he disobeys correctly? You see an error in the code or is this a bug?
<? XML version = "1.0" encoding = "utf-8"? >
"" < mx:Application xmlns:mx = ' http://www.adobe.com/2006/mxml ' layout = "vertical" >
< mx:Script >
<! [CDATA]
Import mx.collections.SortField;
Import mx.collections.Sort;
Import mx.collections.ArrayCollection;
Import mx.events.DataGridEvent;
var myData: ArrayCollection collection = new ArrayCollection (new Array () collection
{name: "Meier", vname: "Peter", City: "Bonn"},
{name: "Meier", vname: "Max", City: "Bonn"},
{name: "Meier", vname: "Olga", City: "Bonn"},
{name: "Meier", vname: "Peter", City: "Bochum"},
{name: "Meier", vname: "Susi", City: "Bochum"}
));
function mySort(event:DataGridEvent) {}
var mySorter: sort = new Sort();
Switch (event.columnIndex) {}
case 1:
mySorter.fields =]
new SortField ("name", true),
new SortField ("vname", true)
];
break;
case 3:
mySorter.fields =]
new SortField ("stadt", true),
new SortField ("name", true),
new SortField ("vname", true)
];
break;
}
myData.sort = mySorter;
myData.refresh ();
}
[]] >
< / mx:Script >
< mx:DataGrid dataProvider = '{myData}' headerRelease = "mySort (event)" >
< mx:columns >
< mx:DataGridColumn dataField = "name" headerText = "Name" / >
< mx:DataGridColumn dataField = "VNAME" headerText = "Vorname" sortable = "false" / >
< mx:DataGridColumn dataField = "stadt" headerText = "Stadt" / >
< / mx:columns >
< / mx:DataGrid >
< / mx:Application >Allright! So the column index begins with zero don't step one! It was the first.
Secondly, once you have defined your own sorter, you don't want the default behavior of the event to pass by so you will add
Event.preventDefault ();
just after myData.refresh (); line.
Give it a shot. should work.
HTH.
ATTA
-
Merge multiple columns into a single column?
Hello
I need to perform queries dynamically and the return values. I need to retrieve the values of the queries in a single column only by concatenating multiple columns. I can't use the PL/SQL in my scenario.
is it possible to run a query and the result will be extracted in a single column (multiple column values must be concatenated)?
Thank you
Raja.SELECT rtrim(extract(xmltype(REPLACE(column_value,''',',')),'/ROW/*/text()'),',') col FROM TABLE (SELECT xmlsequence(dbms_xmlgen.getxmltype('select * from employees').extract('ROWSET/ROW')) FROM dual );
Check this box... Copy it directly to this
Ravi Kumar
-
Trying to create a Section to multiple columns with Sections of the single column before and after
Is there a way to create a section break that is not default to a new page after I created columns on a page. I created the columns and under them, I want to return to the normal formatting for the rest of the single page. See picture attached.
Any rejection of Pages v5 has a break of presentation which was present in the Pages ' 09 v4.3. This will allow you to transition to several columns and back to single column on the same page. In the v5 Pages, you can insert 3 text boxes and change the 3-column layout in the Middle text box. You use the toolbar item Insert to inject column breaks when you want to start a new list in the next column. I'll show this screenshot below.
You can fake your layout in Pages v5 using 3 text boxes and setting 3 columns in the Central text area. Better to show the mode of provision for this and in a text box, the column outlines are not displayed. After each column list, you then choose column break the Insert point toolbar menu to move to the next column, add a list, repeat. Each column will expand downwards. Click on the following to enlarge.
Pages ' 09 v4.3 using layout breaks Pages using 3 text boxes V5.6.1
-
Concatenate multiple columns in a single string
Hello
I use Oracle 11.2, how can I concatenate values from multiple columns in a string with an SQL:
create table testTb (number (5) classId, class varchar2 (32));
Insert into the testTb value (101, 'room101');
Insert into the testTb value (101, 'room201');
Insert into the testTb value (101, 'room301');
Insert into the testTb value (202, 'room444');
Insert into the testTb value (202, 'room555');
I would like to generate the result as following:
Class 101 is room101, room201, room301
202 class is located in room444, room555
Thank youPlease post sample data.
11.2 you can use LISTAGG:SQL> select 'Class '||classid||' is in '||listagg(classroom, ', ') within group (order by classroom) str 2 from testtb 3 group by classid; STR -------------------------------------------------------------------------------- Class 101 is in room101, room201, room301 Class 202 is in room444, room555 2 rows selected. SQL>
-
GROUP BY with multiple columns.
I have a little query on the GROUP BY clause.
Sometimes, we will give several names of columns in GROUP BY. If it behaves in the same way as ORDER BY (multi-column) I wish I had an example where I can use GROUP BY multiple columns. in any case regardless of his behaviour, it will be really appreciated if someone can explain a scenario where GROUP BY with multiple columns can be used.
I know about the use of GROUP BY aggregate functions, but using a single column.
Thank you.. !!!No, not like that
I think that Group by does not follow any order...
If we execute like this
SELECT registrationid, dateofbirth, sum (age) FROM prawin62 WHERE registrationid = 22 GROUP BY dateofbirth, registrationid.
22 1/23/1975 54 22 5/18/2011 330
It will give the same result based on date of birth...
~ Praveen
-
Multiple Crypto cards on a single Interface of ASA
Hello
I work with a TAC support engineer, and while troubleshooting it suggests to assign two different cryptographic cards on a single interface.
It is technically possible to have multiple Crypto maps on a single Interface ASA?
PS: I know have several sequences in a single encryption card would work, but it is a case that I must address multiple Crypto maps on a single ASA.
Hi Ali,
The rule is by interface, a single card encryption is supported. You cannot assign more than one encryption on a single interface card.
Documentation: -.
"You can only assign a single encryption card defined on an interface. If multiple crypto map entries with the same name of card but a sequence number different, they are part of the same series and are applied to the interface. ASA first assesses the entry card crypto with sequence number low. »http://www.Cisco.com/c/en/us/TD/docs/security/ASA/ASA-command-reference/A-H/cmdref1/C6.html
Kind regards
Dinesh MoudgilPS Please rate helpful messages.
-
Gears - error when you try to insert values into a table with multiple columns
Hello
I started playing with the gears and SQlLite today and I get an error when I try to insert values into a table with multiple columns.
I have:
var db = google.gears.factory.create('beta.database'); db.open('developerSet'); db.execute('create table if not exists Developers (DeveloperName text, DeveloperAge int)'); var devName = "Davy" var devAge = 32; try { db.execute('insert into Developers values (?, ?)', [devName, devAge]); alert('success'); } catch (e) { alert(e); }
I get the error:
net.rim.device.api.database.DatabaseException; insert into developers values (?,?): SQL logic error or missing database.
I use this reference: http://code.google.com/apis/gears/api_database.html
Everything works if I have only one field as:
var db = google.gears.factory.create('beta.database'); db.open('developerSet'); db.execute('create table if not exists Developers (DeveloperName text)'); var devName = "Davy" var devAge = 32; try { db.execute('insert into Developers values (?)', [devName]); alert('success'); } catch (e) { alert(e); }
I use the plug-in Visual Studio 2.0 for 2008 that are running Windows XP SP and Simulator 2.13.0.56
Thank you
Davy
Yes, a SQLite database will persist between battery pulls. The database is registered either to internal MEM or removable media (not the device memory), depending on which is available on your device.
In general, its not considered a best practice to remove your table as soon as it is empty and re - create it again when you want to add data. This adds extra overhead fresh for the final, delete and insert first for a given table. Instead, define and finalize your drawing before you create your table. Once created, review the static schema.
That being said, for development purposes, it may be easier to provide an easy way to drop your tables while you develop your schema.
See you soon,.
Adam
-
column headers dynamically change the date filter-based selection? in obiee 11g Analytics
Hello
I work an analytic of obiee 11g.
I have my report coulmns five... who are the branch, district, DS, current year, the previous year.
based on the article on the query filter, column headings change dynamically.
column headings are current, previous year Yes r;
current month, previous month;
current week and the previous week.
for example, if I select the year 2016.
column headings are Branch, district, DS, 2016, 2015 will change dynamically in the analytical report...
Please help me,
I tried, but I do not have...
Please help me,
A.Kavya.
I'm not really sure what you have, but assuming that you have a command prompt of dashboard with the year of the column, define a variable presentation for this column (pv_year) and then in the report, for the columns you want, set the column as header @{pv_year} and @{pv_year-1}.
He must pick up the values from the command prompt and dynamically set in the column headers.
-
Hi all
I'm under APEX 5.0.0.00.31. I created a page that contains a radio button group with 7 columns, 7 interactive reports (migrated from classic reports) and 7 dynamic actions.
When loading the page, the only thing visible is the Group of radio buttons, because reports are hidden by the DAs. When you select a year in the radio unit, the corresponding international registration is displayed. Select another year, a new report shows, and the previous report is hidden. This part works fine, except for one thing. The column headers are not visible. If I go to the Actions Menu, select lines per page and select any number of rows, the column headers are displayed. If I click on a radio button, the new report appears, but without the column headers. Selecting a value of lines per Page causes the column headings appear. I tried to run the application in Firefox and IE edge with the same results.
Any thoughts?
Bob
wisers wrote:
I'm under APEX 5.0.0.00.31. I created a page that contains a radio button group with 7 columns, 7 interactive reports (migrated from classic reports) and 7 dynamic actions.
When loading the page, the only thing visible is the Group of radio buttons, because reports are hidden by the DAs. When you select a year in the radio unit, the corresponding international registration is displayed. Select another year, a new report shows, and the previous report is hidden. This part works fine, except for one thing. The column headers are not visible. If I go to the Actions Menu, select lines per page and select any number of rows, the column headers are displayed. If I click on a radio button, the new report appears, but without the column headers. Selecting a value of lines per Page causes the column headings appear. I tried to run the application in Firefox and IE edge with the same results.
Any thoughts?
Looks like it could be related to error in foldable interactive report 5.0 of Apex.
The elephant in the room is the reason why you use 7 interactive reports to view information for different years. Why not use one and set up the SQL report?
-
Vertical column headers.
How to make the vertical column headers?
I tried the css that given in this discussion. but do not get the result. some body tell me how I could do.
I use Application Express 4.2.5.00.08
I had the answer... Sorry itz pretty simple to do...
Paste the code above into the tag style in the header of the region on what page you want to change...
CSS for a specific page is always indicated in the header of the region in a style tag. Only the confusion for me, is that it does not work master detail... That's why I had my doubts.
-
two column values in a single column
Hi guys,.
I have a requirement that i want to be viewing the two column values in a single as column... values year & product will be exposed in a unique column values
Kind regards
Sree
Karthickumar Pillaiyarsamy yours is a database, in OBIEE is similar with some limitations...
Sree! you have 2 ways to do this: by using the CONCAT function or the | operator, examples here are 2 concatenating year, a space and production:
"Time". "" T05 annually name | ' ' || ' 'Products ' '. Product P1.
CONCAT ("Time". "T05 per year of name', CONCAT (" ","Products".)" P1 product"))
CONCAT in OBIEE accept only 2 params, so you if want to add a space between the 2 items, you must nest your function call.
In case your year column is a number, you can convert it to a string using CAST ("your column" as VARCHAR (10)).
-
Load data form - column headers are not displayed
Using Apex 4.1 on Oracle 11 g
I built a spreadsheet download form, but when he goes to the mapping page does not load, without column headers.
I checked shared components/logic/display/Load_hours. It shows the correct schema/table.
I checked the forum and found the following code as a solution in an archived message:
< code >
() apex_040100.wwv_flow_api.create_load_table
P_ID = > 56199422249645921 + wwv_flow_api.g_id_offset,
p_flow_id = > wwv_flow.g_flow_id,
p_name = > "LOAD_HOURS"
p_owner = > 'MDM_DATA ',.
nom_table_p = > 'REF_STORE_HOURS_UPLD ',.
p_unique_column_1 = > 'EVENT_NAME ',.
p_is_uk1_case_sensitive = > 'n',.
p_unique_column_2 = > 'LAST_MOD_DT ',.
p_is_uk2_case_sensitive = > 'n',.
p_unique_column_3 = > ",
p_is_uk3_case_sensitive = > 'n',.
p_wizard_page_ids = > ",
p_comments = > ");
< code >
It gave me an error so I added this before the line:
< code >
wwv_flow.g_flow_id: = nvl(wwv_flow_application_install.get_application_id,400);
wwv_flow_api.g_id_offset: = nvl(wwv_flow_application_install.get_offset,0);
< code >
Now, I get the following error:
< error >
ORA-20001: Package variable g_security_group_id must be set.
ORA-06512: at "APEX_040100.WWV_FLOW_API", line 71
ORA-06512: at "APEX_040100.WWV_FLOW_API", line 17166
ORA-06512: at line 6
< / error >
Where can I find the g_security_group_id? any other tips?
Thank you
Tim
Bug in 4.1. 4.2 installation of fix
Maybe you are looking for
-
How can I get the icon to send
There was once an icon send when writing email, but now I have to click on "file" and then click on 'Send now' or 'send later '. This seems to be an unnecessary step. How to get back the send icon?
-
Hola buenas noches porque tengo escribo a problema con el keygen del sibelius 5.1 are only este no quiere building el registro del mismo, aunque he followed numer4o las insntrucciones este instalacion don't responde, cosa than not con antes ocurria v
-
Provider Portal App World not not opening!
Hello I try to open the portal provider App World for the last 2 hours. It keeps time. I see 'Connected' in the status bar of the browser, but there are at the moment undefinite. Anyone else having this problem? chall3ng3r / /.
-
Hello Anyone know how to SSH into the ISA 570? I get connection refused and I can't find the options activate or access regarding the SG300 switches it is a simple way to allow access to the Web interface. Paul-mbp: ~ paulsteenbergen$ ssh [email prot
-
Missing files of system recovery
I have a laptop HP 2000 PC build 9600. I just got this notebook to my friend and the first thing I wanted to do was to do a restore system back to factory settings so I watched a video and found how do this so when I whent to go the laptop told me sh