my apps don't squirm screnn is flashing and I can't get apps to remove

I got my iphone 6 plus two weeks and when I hold an app to get moving so I can remove it. the screen flashes but app does not move and x does not appear.

See if your software to iOS iPhone 6 must be updated.

Tap Settings > general > Software

Install the 9.3.4 update if it is available then try to remove the apps.

Tags: iPhone

Similar Questions

  • I don't have my iPhone 5 and I can't get a replacement iPhone 5

    Hello

    I lost my iPhone 5 and not only it's true I can't get a replacement of the iPhone 5, but may not be a phone with a different serial number than the iPhone 5 that I lost.  Thus, not only is - that true you can never find your iPhone If you lose it, it's also true that you are, 'no chance' If you never lose.  How long he stays on after you lose stollen she or he is?  What good 'Find my iPhone', the app can do unless someone it charge up and it connects to the internet.  How many cases is there where a lost iPhone is turned on and connected to the internet so; for can be found?  It takes a unique identification code of cable which can be located by equipment that is put on.

    Apple is not present here

    We are all end users

    Please provide your comments to http://www.apple.com/feedback

  • I just bought a canon 6 d and I can not get my remote EXILE 430 flash. Anyone know why?

    I just bought a canon 6 d and I can not get my remote EXILE 430 flash. Anyone know why? Apparently my camera 'new' picture does not "see" the flash, must now the transmitter? Is there a Flash that work wirelessly with my canon 6 d?

    All remote flashes need a way to communicate with the camera.  They can be wired or wireless.  The wireless system can be optical or radio.

    The key is that there is nothing built in the 6 d to control a flash... If you need something to do this work.

    The 430EX II can be triggered via optical signal as a remote "slave" flash (430EX II cannot function as a mode of 'master' (aka 'Commander').)

    The method of Cannon to control the 430EX II is to use either:

    (a) a "Speedlite ST - E2 transmitter.

    (b) speedlite another able to work in "master" mode (and there's a long list... the 600EX / 600EX-RT, the 580EX II, and curiously the 90EX is actually able to perform a 'master').

    I recommend either the 600EX-RT (which would be the basis for additional units 600EX-RT in the future that would give you radio trigger) or find a 580EX II.  I probably spend on the 90EX and promote a ST - E2 if desired subject is a way to trigger the remote flash and don't actually want a flash.  The 90EX is not very powerful, so it is not particularly suitable as a stand-alone flash, unless you use it simply as a "fill" flash for close subjects.)

    There are also many 3rd party triggers, but the vast majority of them won't let you not use E - TTL (they would be "manual" only) and the units which support E - TTL will be too expensive to buy just a high flash range running as Commander.

  • My airport express base station works but the yellow light flashes constantly how can I get the green light?

    Yellow light blinking on my airport express and I can not get the green light flashes. Internet still works well.

    When the amber light is flashing, open AirPort Utility

    • Click on the AirPort router
    • Look for the Status parameter in the small window that appears
    • Click on the little orange dot here and another window will open to explain what might be the 'question '.
  • There are so many programs that I don't know what I need and what can be uninstalled

    There are so many programs that I don't know what I need and what can be uninstalled.

    I am new to HP computer and am totally lost.

    I got Dell forever.

    Where can I get help to?

    and feel you that would solve problems? I think that you are concerned about a non-issue

  • Window of my computer started flashing and I can't rename a file even after reinstalling my computer.

    Window of the computer began to blink and I can't rename a file when it started to Flash, but after a reason, that he began to stop flashing and I can rename a file at the moment. Even after repeatedly re - install my computer, the problem is still there. Is there a solution to this weird problem?

    Can someone help me?

    Hi Shamir Qushairi,

    You can try these steps and see if it helps.

    Method 1:

    You can try to boot in safe mode and see if you can rename the files.

    Start your computer in safe mode

    Method 2:

    You can also try to update the latest version of disks from the manufacturer's Web site map.

    For more information consult the following link:

    Updated a hardware driver that is not working properly

    Method 3:

    You can also read the following article to download the Microsoft Safety Scanner and perform a full scan on your computer.

    Microsoft safety scanner

    Note: When you perform the analysis, there are chances of losing the data that you can take a backup of important data before performing analysis.

    Hope this information is useful.

  • I don't want to use creative cloud how can I get a download version stand alone?

    I don't want to use creative cloud how can I get a download version stand alone?

    Creative Cloud Applications install stand alone application that install you using the application creative cloud once that connect you to your Adobe account you creative Cloud membership.  You use the desktop application to download, install and activate the applications like Photoshop.

    Without a subscription, you can install 30 days of testing.

    Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

  • I have a Sony DSLR-A300 and I can't get an external flash to work on the shoe mount.

    My problem started when I realized that I had a seated old flash Achiever TZ250 around that I used to use on my old film camera Ricoh KR-5 DSLR. Obviously, the mount was different, so I bought a hot shoe adapter, but the flash does not fire. I thought that even if he was still working very well on the old SLR, that he was probably too old an era Flash to work on the new system of claw so I ordered TT520 Speedlite Flash online that I thought would be more consistent on the claw adapter. As soon as it arrived I unpacked and tried, but to my great disappointment I do nothing that can make the fire upwards. It tests fine, but it doesn't fire at all. Is there something I don't? Is it something with this camera I'm missing? Help, please.

    Kind regards

    Andrew

    Amanda, that I had a look that link and not found very relevant because it is not related to my model. I got from a claw of replacement adapter and I still can't get the flash fires. It's as if there is no power going to the Mount of the brand at all. The camera would be defective?

  • all of a sudden when I open facebook it's tiny tiny and I can't get it back to normal size... help, I don't know what happened

    Please help Facebook is really tiny, all of a sudden, I was on facebook, everything was teeny tiny. I don't know if I pushed a button or what, but I can't get it back to the normal page size. Thank you

    {Ctrl + 0} loaded Facebook (that's a zero) to reset the zoom for this area factor.

  • I have firefox I put in player17.0.0 flash and I can't see vidios on utube or play games on facebook or zynga. Why not? What should I do?

    When I was asked to update my flash player, so I did, I was playing farm town 2 on Zynga. When I did, I went to play my game and the image would not return. The site came, but the game would not load completely so that I can play the game. I'm went on You tube to play music videos and the videos would not play. I went to my WWE network to see if I could look at him and I could not watch anything there either. I can not even play my games book face. I loaded and unloaded flashplayer at least a dozen times or more, and I still can't get anywhere. I can also do not charge any old version of flash player. What should I do?

    First of all, unfortunately, pop-up message on the Flash updates while you visit Web sites can often install malware. If you notice any strange behavior then please complete your plan of regular safety with some freedom to scan/cleaning of the tools listed in our technical support article: Troubleshooting Firefox problems caused by malware.

    Secondly, your "more details of the system" does not show the 'Shockwave Flash' plugin, so it can be disabled. You can check on the page modules, either:

    • CTRL + SHIFT + a
    • "3-bar" menu button (or tools) > Add-ons

    In the left column, click on Plugins. Search for "Shockwave Flash", and if you find it, change permission to 'never activate' to 'ask to activate '.

    If the plugin is not there, you can check the following folder to see if you find this file on the system:

    File: C:\Windows\SysWOW64\Macromed\Flash
    File: NPSWF32_17_0_0_188.dll

    I also noticed something odd: you said Windows 7, but your Firefox means Windows XP. Could clear you any parameter of backward compatibility on your shortcut to Firefox. Here's how, either:

    • Right click of your Firefox shortcut on the desktop > properties
    • right click on your icon of Firefox taskbar pinned > Mozilla Firefox right-click > properties

    In this dialog box, open the Compatibility tab and make sure that nothing is settled here, so Firefox can take full advantage of Windows 7.

  • I don't have bookmarks open as a b4 in the sidebar, but it's today and I can't get rid of it. Absolutely, I went to the bookmark and the option for the sidebar is NOT ch

    I don't have the option open as a verified sidebar, never have, and NEVER had it do this til today. I can't get rid of him open like a sidebar when I open ff. Help, please. There must be another way to get rid of it before you restore my pc!

    From the keyboard, {Ctrl + B} opens and closes the bookmarks bar. If it is open when you close Firefox, it will open the next time to launch Firefox.

  • I get a request for local storage through Adobe flash which I can't get rid of

    When I opened a site of video or audio as the NPR media player http://www.npr.org/player/v2/mediaPlayer.html?action=2 & t = 1 & islist = false & id = 370394953 & m = 370394958 & live = 1 I get a request for Adobe Flash Player settings for Local storage. Clicking on accept or decline does not a doggone thing. I don't have the problem with Google Chrome, but I really prefer to use Firefox. I had the problem with other sites next to NPR (National Public Radio All Things Considered). It does not interfere with the download, but there really with the NPR player. My world will not end if you do not resolve the problem, but it would be nice if you could. I live in the Philippines, so that might be a factor.

    I use Windows 7 via a network (Globe Telecom) local DSL

    See the following page:

  • When I get an iMessage my wife does as well.  I don't have his phone verified.  How can I get off its my iMessages phone?

    How can I remove my wife's phone to receive my incoming IMessages?  I don't see his phone number. Checked on my menu

    You should make your own apple for imessages ID.

  • All my Airport extended expresses abandoned their Wi - Fi connection to my base station can the airport extreme.  In other words, the light goes from green to yellow flashing and I can't reconnect.  All ideas

    All my express airport extended (one for music, one for the printer and one to extend range) lost their connection at the same time.  In other words, they all went from green to yellow flashing.  I was not able to reconnect.  Any ideas on how to solve this problem?

    Your first step is always power off the entire network... what... and then restart in good order.

    Modem... Wait 2 min

    Main router... Wait 2 min

    Extenders... Wait 2 minutes.

    Printer and other clients... wait that see everything toward the top.

    If this fails, then you need to find how the network is down... Connect the modem to the computer by ethernet... didn't you internet... If Yes... then try to the main router... If so, try again the next step... When you find the scene of the breakdown, reset it to factory and redo the configuration.

  • Printer has a block of paper that has been authorized, but the light keeps flashing and I can't print

    I feel, then the printer has got a pad of paper, I pulled out the paper, but the printer does not print more. I don't know what happened.

    Hello

    • What happens when you try to print now?
    • You receive an error message when printing?
    • What version of Windows are you using?
    • What is the brand and model of the printer?
    You can check these links:
    Printer in Windows problems
    Why can I not print?
     
    Try also to turn on and off the printer and check.

Maybe you are looking for