My hard disk v3-472 comes off and I have to take it apart to reconnect.

Similar Questions

• I bought a new hard drive as an upgrade for my previous hard disk which had no space and I want to put vista on my new hard drive. I have a sony notebook and cannot find a way to do

  new hard drive

  I bought a new hard drive as an upgrade for my previous hard disk which had no space and I want to put vista on my new hard drive. I have a sony notebook and cannot find a way to do thanks in advance

  How to pass windows 7 to a new hard drive using Acronis True Image Home 2011:
  http://www.PAGESTART.com/acronisnewharddrive01.html

  The same technique should also work for Vista.

  Note: Acronis now sells their 2012 for the UI version may be slightly different.

  J W Stuart: http://www.pagestart.com

• When installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system?

  Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.

  Original title: used to install Windows 7

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also check Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  J W Stuart: http://www.pagestart.com

• Connect physical hard disks to the virtual machine (and leave the data intact)

  Hello

  I'm looking to virtualize a SOHO headless server, that I use mainly for secure file storage.

  Currently, the system runs Linux installed on a small disc and has two drives 1.5 TB, used exclusively for data, in a cluster of ZFS mirroring. (I use the ZFS-fuse Linux-based application).

  I want virtualization for two reasons. One is to make administration easier and safer - avoid having to connect a keyboard and the physical monitor to the box from time to time. The other is that the machine is a bit more powerful to handle the load, and I'm hoping to make it work on other, more challenging tasks.

  Now, there is a catch. These discs are as highly important. I mean the data on them. What I need is to convert the current Linux system to a virtual machine, or re - install Linux on a virtual machine (don't like that), then connect the physical disks to the virtual machine as if they were actually connected.

  I certainly don't want to vmware touches those disks somehow.

  I've read the documentation, but I'm a noob when it comes to server virtualization and system engineering and don't quite understand if this is possible or not. These discs are not a SAN, they are physically connected to the server, I want to install vSphere on. (Of course, I'll log out when I run the setup of vSphere. But I need plug them again later, and they need to be sure that vmware will leave them alone and pass them to the virtual machine transparent.)

  Sigmoid wrote:

  Oh yes, the cluster mirrored ZFS. It is essentially a software RAID type thingie.

  http://en.Wikipedia.org/wiki/ZFS

  A material, or the point of view of virtualization, it appears two hard drives with a single huge partition on each that is not transparent to anyone, except the implementation of ZFS.

  OK, means that you can break the RAID, connect the drives to different host and configure RAID once again, right?

  Let's do it this way

  1. We will need a disc player more for VM, cause on flash, we install ESXi
  2. I will share ZFS :-), all you need to do with that before you install ESXi
  3. make the BACKUP!
  4. Disconnect the data host drives
  5. install ESXi 4.1 U1 free version on flash
  6. Download the site VMware vSphere client
  7. Connect the VM disk to ESXi
  8. customer help create the virtual machine and install the OS on it
  9. stop the virtual machine and esxi
  10. connect DATA drives to the ESXi host
  11. begin to ESXi
  12. See how to add RDM on youtube, after client use, change first hardware VM--> add a new hard disk--> choose Raw Device Mapping--> (physical or virtual) mode--> store it with folder VM - FACT
  13. Start the virtual machine, now your VM should see both drives, with good data course :-)

  I have just made this procedure (add ROW with data in Linux VM) on ubuntu VM, works well

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• my picture freezes and I have to take the side to unfreeze it

  freezes then I hold the side freezes after some time thenafter awhile back

  Hello

  1. what pictures/images are frozen?

  2. what application you use to see all the photos?

  3. What do you mean by "I have to take the side of thaw it '? »»

  Method 1 : run the Fixit and check if the problem is solved or not.

  Windows Photo and slideshow problems

  Method 2: Perform the clean boot and check if the problem is resolved or not.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: Perform step 7 reset the computer to start as usual after the boot process.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Hope that helps.

• Product key HP G62 Notebook - replace the HARD disk - Windows has rubbed off

  Hi there, I would really appreciate how I can recover my windows product key since it has rubbed off the bottom of my laptop and I would like to replace the hard drive and create a boot disk... Please can anyone help with what I can do to get my product key for HP.

  Windows 7 64 bit Home Pro

  Hello

  Unfortunately, there is no way to recover your Windows COA key - neither HP or Microsoft will have any record of it.

  However, if you use recovery discs for your laptop, they will not require the key to the COA and will activate automatically.

  If you wish, you can order a set of replacement recovery disks using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Pavilion dv6t-2000: replacing old HARD disk with the new SDS and loading the OS with 1 & 2 recovery discs fails

  I just successfully replace the SSD, exchanging an old 250 GB HDD with a new 250 GB HARD drive.

  I started with success, inserted the disc of recovery by the instructions on the screen. Disc 1 and rendered, it succeeded.  When you are prompted, load disc 2, which was also successful.  When asked, in charge of the "application and driver recovery CD" and continued.

  At this point the computer restarted several times, as he said it would be completion of installation of all elements.  Then he came with a message that says: the recovery attempt failed. Select one of the following buttons.

  "Save Log"; 'Details '; 'Retry '.

  Details says:

  ChkErrBB.CMD: Detects an error in the PININST_BBV.

  ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log

  Any suggestions here?

  I update my BIOS before proceeding with the Exchange.

  I found the solution to this problem was already answered here:

  http://h30434.www3.HP.com/T5/notebook-recovery/quot-detect-some-error-during-PININST-BBV-quot/TD-p/2593075

  Thank you!

• On my dell Inspiron 6200, the hard disk had to be annihilated and XP Pro has been reloaded. Now the laptop is not wireless networks. How can I fix it?

  When wiped the hard drive and windows XP Pro THAT was recharged the cell seems no longer to see wireless networks. I have a netgear router and 2 other laptops accessing it. It acts as the laptop has the switch WiFi off, but it is not a. I need help!

  Hi WilliamBowman,
   
  -What version of service pack of Windows XP you are using?
   
  Method 1: Install the latest driver available for the wireless network adapter and check if it helps fix the problem.
   
  For more information on the update driver, see:

  How to manage devices in Windows XP

  Method 2: Follow the steps listed in the article given below to resolve this issue:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  Note: The steps that are listed in the article are applicable to the other service pack versions of Windows XP as well.

• Hard disk crash, reinstall Adobe CS6 and LR 6 Progs.  How should I treat the activations?

  Hello.  I have two questions, and both are presented here because they are linked to the main problem.

  Question 1:

  I had a hard drive failure.  I lost my operating system and applications.  I am aware of the issues with Adobe software activation.  I am a registered user of Adobe CS6 and Lightroom 6.  I need to reinstall, but I don't want the activation count against me, as I also want these programs on a laptop.  I can't 'turn off' these programs as the hard drive failed.  I have more access to this broken system.  I reinstall my whole system.  How to achieve this?

  Question 2:

  I bought Lightroom 6 an update of Lightroom 5.  Since I had the hard drive failure, and I guess I'll get help with question 1 above, must I reinstall Lightroom 5 first?  I would prefer not to reinstall Lightroom 5 I want the new installation of the system to be as clean as possible.  Please notify.

  Thank you

  Randal

  Hi Randal,.

  Click on the link above and select still need help.

  

  Concerning

  Megha Rawat

• My Hard disk drive (C) is full and can not save on my local drive (D)... Help!

  I can't save anything else on my computer and I feel as if I had barely whether registered here initially. My (C) drive is almost full and my local disk drive (D) has so much space to this topic, but I don't know how to do as my default player. I tried following the suggestions of the people online, but nothing helped. Can anyone help?

  The first thing to do is run the disk cleanup utility. Instructions here.

  Then, try to move some files and folders. There are a few different folders, you can move from the C drive to the D drive. So let me suggest you only start moving your files, documents, music, photos and video from C to d. here are the instructions. You need to do one at a time. To find them, in Solution Explorer, expand the C drive, find your name under users and all your personal files are there.

  After these two things, tell me how much space you have on C.

• My hard drive had to be replaced and I have now CS6. How can I reinstall the CS6?

  My old laptop died and I had to have the hard drive replaced. Now all of my Adobe products are gone on the new hard drive. Can I reinstall them?

  Hello

  Welcome to the community!

  You can download all the software here: http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  Do not use Internet Explore to download, other browsers work fine.

  Thank you!

  Ankit

• My windows defender keeps turning itself off and also have problems with Yahoo

  Original title:

  Mr. Ron Irvine * address email is removed from the privacy *.

  My windows Defender maintains itself out of service so I continue to say that

  My windows live says I need much information from my ISP (bt) which they do not understand

  By default, I bring this matter up to quarterly because it causes pain so

  I just write down the address and continue on Yahoo

  But are not Holy smoke in great disorder?

  I wonder what answers I could get!

  Ron

  Oh sorry have a peaceful and happy Christmas

  BUT as a previouis years, Scotland has a major incident in Glasgow involving death

  (Moved from E & C)

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• When I'm in a game like world of warcraft after a few minutes, my system shuts off and I have to restart.

  This does not happen when I'm on the desktop, there is know software malicious or ads.  I like to check to see which startup or boot files are loaded nobody knows about it

  Hello

  You can see which starts on startup with one of these

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup. Disabling these programs will help your computer boot faster and crash less

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  If you think you have malware:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If problems persist, try the vista games forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-gaming?page=1&tab=all

• Turn on the labels of the buttons! Why are they turned off and I have to spend ages trying to find how to activate their!

  I have to waste time reset my toolbars after the bloody upgrade because I'm upset. Where do you turn on the labels of the buttons so I know what they are for love?

  Edited by a moderator because of the language. See the rules and lines guidelines .

  Hello

  The people who answer questions here are for the most part, other users Firefox dedicating volunteer their time (like me), not employees of Mozilla or Firefox developers.

  If you want to leave a comment for the developers of Firefox, you can go to the Firefox help menu and select submit comments... or use this link. Your comments gets collected at http://input.mozilla.org/, where a team of people read it and collect data on the most common questions.

• My firewll turns off and I have to go put on all the time how can I fix the itf

  Firewall current and must be rebooted how can I do to stay on

  Hi karnak72,

  ·         You did changes to the computer before the show?

  ·         Which antivirus program is installed on the computer?

  Method 1: Some suites of security software disable Windows default firewall.  Check if there are all these parameters in the program installed on your computer.

  Method 2: Run the following tool Fixit.

  Diagnose and automatically fix problems of Windows Firewall service