My mac does not detect my hard drive after the upgrade. How to solve this problem?

Similar Questions

• Sansa clip does not play flac frimware is 1.1.30f1 how to solve this problem

  Hi all

  Sansa clip does not play flac frimware is 1.1.30f1 how to solve this problem

  I need software to convert mp3 to flac, please guide me because I want to test flac on sansa clip

  Thank you

  He plays very well FLAC.  There is probably a problem with your files.  They are not coded correctly, or you use the ID3 tags.  The Clip only supports normal Vobis comment tags to FLAC / Ogg.  Mp3Tag should be able to fix your labels if that's the problem.

  In addition, there is no reason to convert MP3 to FLAC.  It will sound the same as the MP3, but you will have much larger files.  If you want to get the advantage of FLAC (or any lossless format) you will need to rerip your CDs.

• Does not detect my HARD drive in the BIOS

  Yesterday, I bought DT01ACA300 of HARD drive and it does not detect.
  I've tried it on two motherboards (different ports and different controllers: AMD, Intel chipset JMicron chipset) with different powers and signal cables (which do not work with my player Samsung HDD and DVD SATA Lite-on), but it won't do no good...

  It seems that the only thing that might have caused it may be the power supply, but I can't check it out because I don't have a spare. I tried to disable most of the unnecessary controllers on MB to lower energy consumption, but it did not help.

  From what I've read on the Internet, it seems that it is not I can do by myself and it is very likely defective drive, but I still have some hope that I can make it work...

  It would be a big problem to return to calm: I'll have to send in another city in the authorized service center so that they would check it, and then only, I can get a replacement (if noone will fly it by then, which can happen...).

  Which machine do you have?

• Windows 7 does not recognize external hard drive after the reboot

  I just bought a WD external hard drive.  I plugged in the USB port and automatically loaded everthing.  I even registered the product.  Then I was told that there was an update to the external hard drive.  I went ahead and put to day and when my computer restarted to him alone is no longer recognizes WD external hard drive.  I had another hard drive that I used where Windows 7 does not recognize it either?  Is it some sort of security setting, I need to adjust on Windows 7 64 bit?  Please notify.

  Check if the hard drive is assigned to a drive letter in disk management.

  Click Start, right click on computer

  Click on management of

  Expand disk management

  Select your external hard drive if its posted here

  Make a right click paths and change drive letter

  Restart your computer, open the computer in the start menu and see if it shows then.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• the Windows xp Setup program does not detect my hard drive

  When I try to install Windows XP, it does not detect my hard drive which is visible in the bios.  My bios options are very limited, but I was able to use the bios to change the sata in ide.  It still does not work, and now he is not found with the disc of windows 7 I have.  This isn't a new pc.  He was working at a given time, but foolishly, I formatted the hard drive and have no drivers for my drive hard hitachi.  I bought a new seagate Mak, but now this disc hard is not allocated and is also not detected.  I have no way to get an operating system and I'm in a jam financially... Please help.

  SATA drives are not recognized by Windows XP installation disc.  Change the BIOS SATA ATA sometimes solves this problem and allows you to install and sometimes does not.  Microsoft's solution is to press the F6 key when you are prompted for additional drivers, and then insert a floppy disk (Yes, it takes a floppy) with the top driver.

  "Limited OEM driver support is available with F6 during installation of Windows XP and Windows Server 2003"
    <>http://support.Microsoft.com/kb/314859 >

  Several means have been formulated to work around needing a floppy disk.  You can view the following items:

  'Install Windovs XP on SATA without floppy (F6)'
    <>http://News.Softpedia.com/news/install-Windows-XP-on-SATA-without-a-floppy-F6-47807.shtml >

  "Install Windows XP on a SATA hard drive"
    <>http://en.kioskea.NET/FAQ/2544-installing-Windows-XP-on-a-SATA-hard-drive >

  HTH,
  JW

• error message stating: "could not initialize Photoshop because the preference was not valid (it has been deleted)" nobody knows how to solve this problem?  Thank you!

  I cannot open photoshop, I get the error message stating: "could not initialize Photoshop because the preference was not valid (it has been deleted)" nobody knows how to solve this problem?  Thank you!

  Hi malloryf,

  Greetings!

  Please reset the Photoshop preferences and try again.

  Here's a similar thread: Re: preferences was not valid.

  Concerning

  Jitendra

• With the help of AUSST - latest updates of Adobe CC 2014 are not uploaded to the server - how to solve this problem?

  With the help of AUSST - latest updates of Adobe CC 2014 are not uploaded to the server - how to solve this problem?

  I tried both incremental and train to do a fresh install (. / AdobeUpdateServerSetupTool - root = "/ serverroot/updates / Adobe / CS '-fee)

  If anyone can answer this - please let me know.

  Hi Mark,

  Try to refresh the web server and run the AUSST with cool switch. In addition, please make sure that you have enough disk space available in the location of the server.

  Thank you

  Ashish

• Why my mac does not recognize my hard drive or SD cards?

  I got a new Macbook Air last month. Since I had so much problems with it - mostly because if you plug in anything whatever in the SD card slot or USB drives, it does not recognize them. I own a mac before, as well as PC laptop dell, so I am aware of the problems when formatting the discs everywhere, but even when I plugged a new passport hard drive, the computer couldn't find. Similarly, you may not find all the SD cards when I tried to use the SD card.

  What is going with this? I am a photographer living, so I need constant access to these two. This new model has some new method for transfer of files from the external hard drive etc.?

  Close, then connect the mac to a power adapter, disconnect all external devices.

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  reset all external then pulls even deleted

  Once you open a session reconnect the external hard drive

  If the drive is connected with a hub of party 3rd do not use it and connect the drive directly to the mac

  Connect the external hard drive and open Macintosh HD/Applications/Utilities/Disk Utility disk utility

  The drive appears in the list of external devices?

  

• PC does not detect external hard drive not

  I / OMagic GigaBank 80 GB 4200 RPM hard drive

  is there a software assistant to help me install my pc so will detect.

  1. What is the operating system that is installed in the computer?

  2 have you tried to connect to another USB port and check if the hard disk is detected or not?

  3. is it detected in another computer?

  Check if Device Manager the drive is displayed.

  http://TechNet.Microsoft.com/en-us/library/bb456985.aspx

  Hope that helps.

• SeaTools-BACK does not detect my hard drive, how I should zero my HDD now?

  Hi all!
  I use SeaTools for DOS for many years to fill the hard drive of my old ancient PC from scratch and never has a problem. However, today when I had zero fill the Momentus ST9500325AS 500 GB SATA laptop 1 year, I got to know that the last SeaTools for DOS can not find a controller to read my hard drive. My laptop has Intel HM67 chipset. As the 'last' SeaTools BACK has been updated in 2011, I understand very well that Seagate does not update the tool to add the controller of my chipset. So all I want to ask is, how do I zero fill my drive now? Should I go for some other tools? Are they reliable? Please suggest some good I knew that nothing else than seatools for zero fill.
  Thank you for your help

  Hi Satyam,

  Formatting zeros is a comprehensive method of wiping a disk storage. When formatting a storage drive deletes data on the surface, the data can still be recovered until it is replaced. Formatting the storage disk wipes zeros, replaces the data deleted by a series of zeros and then wipe the drive again to make recovery of data beyond the civil means. Zeros of formatting is usually done to hard disk drives and flash drives can also benefit from the method.

  We can refer to this article and check if that helps.

  How zeros external drive using DiscWizard: http://knowledge.seagate.com/articles/en_US/FAQ/205971en

  Alternatively, you can also post this question to the Seagate Community Forums: http://forums.seagate.com/

  Response with the State of the question and we will be happy to offer you our help.

• Installing Windows 8 does not detect my hard drive!

  Hi all! I recently installed a new copy of Windows XP on my computer to Windows 7 and now I would like to install Windows 8. I have no viruses on the Windows XP Machine, then Yes. I boot on my CD of Windows 8 and when it comes to the part where you want to install windows my hard drive is not detected... Strange... Whenever I installed a new copy of windows I've never had this problem...  Instead, I see "Boot: X" and my installation disk. " PleaseHELP!

  Try the following

  Boot from the DVD Windows 8

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Press SHIFT + F10 from your keyboard

  type the following commands

  DISKPART

  Press enter

  the list volume

  Next, you select the volume where you want to install Windows 7

  Type: select disk #.

  # represents the number of the volume

  Type: clean

  convert mbr

  create the primary partition

  assets

  format fs = ntfs quick

  output

  output

• Envy 14 CTO will not shut, forces hard stop, after the upgrade to win 10 anniversary

  After a long wait in Win 10 the Envy 14 finally began to sleep and shut down properly. As soon as the update of the anniversary has been installed, we went back to the questions of the soul. System not completely stops and freezes to force a hard reboot, after that the restart that he stop or sleep is selected manually. If the system can accommodate on its own, then it is more closed or sleep without rebooting.

  Course on all drivers and troubleshooting power back shortly to all default values.

  Hello

  Try the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

  When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.

  https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-nu...

  Once the installation is complete, restart the laptop.

  When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

  Kind regards

  DP - K

• Inbox will not work. Everything incoming in-BASKET. How o solve this problem?

  Thunderbird. Thousands of emails from people who I've never sent an e-mail sent a message ' MAIL DELIVERY FAILED. WHY? !
  Also all my "INBOX" is now going into "TRASH". Please help with the solution. I have Time Warner Cable and an e-mail that Mozilla Thunderbird fronts, but especially that never gets posted there. Problem is ubiquitous.

  $300 per copy of what? Thunderbird and Firefox are the two open source and free.

• does not detect external hard disk

  Hey guys

  Recently I update my macbook pro (2014) in the sierra of mac os. Since then, my mac does not detect any external hard drive I plug in it even if these drives are detected by the PC and all the files inside. I tried to open utility disk where the hard drive is displayed but the 'volume' located below is gray. When I try to hit mount said volume that nothing happens. All I could do to fix this?

  Thank you in advance.

  Hi sgerolio,

  I understand that you are unable to detect any external drive that you plug into your MacBook Pro, since you upgraded to macOS Sierra.  How many external hard drives work?  How they are formatted?   If formatted for PC, they would not necessarily be able to be read by a Mac.

  You have a small empty external drive or USB key that you can test?  Formatted in Mac OS extended (journaled).  Using the Finder, you are able to see the external drive and drag a file to it?

  The title of the article includes the Aperture application but apply these tips to format an external hard drive to any software application.

  Drives external format Mac OS extended before using with opening

  Take care.

• Windows media player does not recognize my hard drive

  Windows media player

  Why Windows media player does not recognize my hard drive

  Hello

  1 are there any changes or updates made on the computer?

  2. do you get an error message? If Yes, what is the full and exact error message?

  I suggest to see the links and check if it helps:

  The problems of the CDs or DVDs

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-CDs-or-DVDs