My message do not show up in my Apple Watch

Similar Questions

• When I send a message or call a contact with my Apple Watch, what message or free call? or I am paying it with my mobile plan?

  When I send a message or call a contact with my Apple Watch, what message or free call? or I am paying it with my mobile plan?

  Apple Watch is just an extension of your iPhone.

  If you send a message or make a call, you would via the paired iPhone.   Just as if you had sent the message to the iPhone or telephoned him with the iPhone.

• iPhone 5s does not save the steps of Apple Watch

  Just bought a brand new Apple Watch 42mm and paired with my iPhone 5 s. When I go to the activity app on my iPhone recordings of activity in the colorful journey circle and documents the calories. When I scroll through the steps it shows 0 steps. Missing however on behalf of digital not posting on the color chart. I tried to stop the iPhone and watch, but that has not worked. The Apple Watch IS indicating all the correct information.

  Now, I first bought the watch of 38mm and referred to this larger. I have not matched the old watch and paired it again. Not sure if it was a problem.

  HI - try the following steps:

  On your iPhone in the app shows, go to: Watch My > General > wrist Detection - make sure it's open.

  On your iPhone, in the application of the watch, go to: Watch My > privacy > disable Motion & Fitness - Fitness track (or, if it is currently disabled).

  Restart both devices by turning the two first set, and then restart your iPhone before restarting your watch:

  -To switch off your iPhone: press and hold the sleep/wake button until the Red slider appears. slide it to turn off. To restart, press and hold the sleep/wake button.

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off. To reactivate: press and hold the side button until you see the Apple logo.

  If you disabled followed fitness in step 2, now return to the configuration and turn it back on.

• Everyone can not open Wechat of the Apple Watch after the last update?

  After the update for Wechat around the end of 2015, I can't open the app to Apple Watch.

  Whenever I tried to open the app, a loading screen came, and then the application leaves itself.

  Someone help please?

  Thank you!

  I already have the Apple Watch combat and reinstalled the Apple Watch. I can always open the app.

  I use a system of 2 OS on my watch and an iPhone iOS 9 5 C.

  If you have not already done so, it may help to update your iPhone and Apple Watch for the latest versions of software.

  Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  Update the software on your Apple Watch - Apple Support

  If not, try the following steps:

  • On your iPhone, go to: settings > General > storage & use iCloud:
    • In the storage section: press on managing storage > music > Edit (top right corner) > delete all the songs.
  • Back up your iPhone to iCloud (do not reset your iPhone later, just to make the backup):
    • How to back up your device using iCloud or iTunes - Apple Support
  • Also back up (but does not synchronize) your iPhone to iTunes, select the option "Encrypt iPhone backup" (even once, do not reset your iPhone later, just to make the backup):
    • How to back up your device using iCloud or iTunes - Apple Support
  • Then try again to open WeChat.
  • Music can be added to your iPhone again after trying these steps.

• success of process message did not show

  Hello
  All the
  I have a process called "process" page which is "On submit - after calculations" and Validations with the look of PL/SQL codes such as:
  
  < pre class = "jive-pre" >
  
  
  DECLARE
  
  v_blob_data BLOB;
  
  v_blob_len NUMBER;
  -v_blob_len NUMBER: = DBMS_LOB. LOBMAXSIZE;
  V_POSITION NUMBER;
  
  v_raw_chunk RAW (10000);
  
  v_char char (1);
  
  number of c_chunk_len: = 1;
  
  v_line VARCHAR2 (32767): = NULL;
  
  v_data_array wwv_flow_global.vc_arr2;
  
  number of v_rows;
  
  number of v_sr_no: = 1;
  
  BEGIN
  
  -delete from data_upld;
  
  -Read data from wwv_flow_files </span >
  
  / * Select blob_content from v_blob_data
  
  of wwv_flow_files
  
  where last_updated = (select max (last_updated) in the wwv_flow_files where UPDATED_BY =: APP_USER)
  
  and id = (select max (id) in the wwv_flow_files where updated_by =: APP_USER); */
  Select blob_content from v_blob_data
  from wwv_flow_file_objects$
  where id = (select max (id) from wwv_flow_file_objects$);
  v_blob_len: = dbms_lob.getlength (v_blob_data);
  
  V_POSITION: = 1;
  
  -Read and convert the binary for char </span >
  
  WHILE (v_position < = v_blob_len) LOOP
  
  v_raw_chunk: = dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
  
  v_char: = chr (hex_to_decimal (rawtohex (v_raw_chunk)));
  v_line: = REPLACE (v_line, CHR (10),': ');
  
  -v_line: = substr (v_line, 1, length (v_line)-2);
  
  v_line: = v_line | v_char;
  
  V_POSITION: = v_position + c_chunk_len;
  
  -When a whole line is retrieved < / span >
  
  IF v_char = Chr (10) THEN
  
  -Convert comma to: to use wwv_flow_utilities </span >
  
  v_line: = REPLACE (v_line, ', ' :'); ")
  
  -Converting each column separated by: in the data table </span >
  
  v_data_array: = apex_util.string_to_table (v_line);
  
  -Insert data into the table target </span >
  
  EXECUTE IMMEDIATE ' insert into DATA_UPLD (SR_NO, CODE_ID, CODE_CTGY, CTGY_NAME, CTGY_DESC, nom_element, ITEM_DESC, ACTUL_COST, DIS_PER, SCHM_ID, ITEM_UNIT)
  
  "values (: 1,: 2,: 3: 4:5:6,: 7,: 8,: 9,: 10:11).
  
  USING
  v_sr_no,
  v_data_array (1),
  TO_NUMBER (v_data_array (2)).
  v_data_array (3),
  v_data_array (4),
  v_data_array (5),
  v_data_array (6),
  TO_NUMBER (v_data_array (7)).
  TO_NUMBER (v_data_array (8)).
  TO_NUMBER (v_data_array (9)).
  v_data_array (10);
  -Remove
  
  v_line: = NULL;
  
  v_sr_no: = v_sr_no + 1;
  END IF;
  END LOOP;
  END;
  < / pre >
  
  in the success of the process of entering Message i
  
  < pre class = "jive-pre" >
  
  #MRI_COUNT # | "& P1_MSG. »
  
  < / pre >
  
  P1_MSG is an element hidden with the default value: Insert success
  
  But no messages show what argued the success of the process
  
  Can you help me?
  
  Saven

  Hello

  Ah, sorry.
  You loop here and you always insert just one line.
  Just increase variable in loop and then the value point.

  DECLARE
    v_blob_data BLOB;
    v_blob_len NUMBER; --v_blob_len NUMBER:= DBMS_LOB.LOBMAXSIZE;
    v_position NUMBER;
    v_raw_chunk RAW(10000);
    v_char      CHAR(1);
    c_chunk_len NUMBER           := 1;
    v_line      VARCHAR2 (32767) := NULL;
    v_data_array wwv_flow_global.vc_arr2;
    v_rows  NUMBER;
    v_sr_no NUMBER := 1;
  
    l_loop_count  NUMBER;
  BEGIN
    -- delete from data_upld;
    -- Read data from wwv_flow_files
    /* select blob_content into v_blob_data from wwv_flow_files where last_updated = (select max(last_updated) from wwv_flow_files where UPDATED_BY = :APP_USER) and id = (select max(id) from wwv_flow_files where updated_by = :APP_USER); */
  
    l_loop_count := 0;
  
    SELECT blob_content
    INTO v_blob_data
    FROM wwv_flow_file_objects$
    WHERE id=
      (SELECT MAX(id) FROM wwv_flow_file_objects$
      );
    v_blob_len := dbms_lob.getlength(v_blob_data);
    v_position := 1;
    -- Read and convert binary to char
    WHILE ( v_position <= v_blob_len )
    LOOP
      v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
      v_char      := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
      v_line      := REPLACE(v_line, CHR(10),':');
      --v_line := substr(v_line, 1, length(v_line)-2);
      v_line     := v_line || v_char;
      v_position := v_position + c_chunk_len;
      -- When a whole line is retrieved 
      IF v_char = CHR(10) THEN
        -- Convert comma to : to use wwv_flow_utilities
        v_line := REPLACE (v_line, ',', ':');
        -- Convert each column separated by : into array of data
        v_data_array := apex_util.string_to_table (v_line);
        -- Insert data into target table
        EXECUTE IMMEDIATE 'insert into DATA_UPLD (SR_NO, CODE_ID, CODE_CTGY, CTGY_NAME, CTGY_DESC, ITEM_NAME, ITEM_DESC, ACTUL_COST, DIS_PER,SCHM_ID, ITEM_UNIT) values (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11)' USING v_sr_no,
        v_data_array(1),
        to_number(v_data_array(2)),
        v_data_array(3),
        v_data_array(4),
        v_data_array(5),
        v_data_array(6),
        to_number(v_data_array(7)),
        to_number(v_data_array(8)),
        to_number(v_data_array(9)),
        v_data_array(10);
        -- Clear out
        v_line  := NULL;
        v_sr_no := v_sr_no + 1;
  
        l_loop_count := l_loop_count +1;
      END IF;
    END LOOP;
  
    :Px_YOUR_ITEM := l_loop_count;
  END; 
  

  Kind regards
  Jari

• Messages will not let me connect my Apple ID

  Recently, I've restored my laptop to factory settings. When you try to set up the Messages, it wouldn't let me connect my Apple ID. I know he recognizes when I use the right credentials, because he tells me that my password is incorrect, when I enter the wrong password. When I enter the password, the ID and the password letters out gray (is no longer editable) for one second then back to black (you can type in the box again). I would really like to be able to text my cell phone, so please let me know what I can do about it.

  There are hundreds like you with the same question... all I can advise is, relax, go get a drink, there is no solution, the only solution is to wait for the apple engineers to fix it... I tried to solve this problem for 11 hours... ABSOLUTELY everything tried... nothing doesn't work, don't waste time lol

• Do not show this message

  So I delete a message today on Skype and I accidentally clicked on the box that says, do not show this message. Is there a way I can receive only pop up again? I wish I had the confirmation when I delete messages again.

  You can try this:

  http://community.Skype.com/T5/Windows-archive/turn-on-remove-message-notification/m-p/3803737#M23906...

• The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490).

  The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.

  
  

  I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• I keep getting these messages at the bottom of my screen. "" Intranet settings are disabled by default "do not show this message.

  Original title: Intranet or Internet

  I keep getting these messages at the bottom of my screen. "" Intranet settings are disabled by default "do not show this message.
  "Enable intranet setting." This setting is necessary or can I get rid of it?  If it is disabled, which is not enough say?

  Hello

  1. you receive the error while browsing?

  2. you use Internet Explorer browser to surf the internet? If so, which version?

  See the following article:

  Changing intranet security settings:

  http://Windows.Microsoft.com/en-us/Windows-Vista/changing-intranet-security-settings

• Cancellation: "do not show this message in the future".

  A Tech support guy selected "do not show this message in the future" on the page uninstall programs...  Well... I didn't do this to him.

  How to reverse the "selection" do not show this message in the future? '"

  Thank you

  Well found the answer.  Posting it here in case anyone else is curious

  1. type regedit into the dialog box RUN and press ENTER. Now goto:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\DontShowMeThisDialogAgain

  2 in the pane, delete the following string value:

  {948e51fb-0a48-44f0-86ac-33c36def540c}

  Alternatively, you can change its value to Yes instead of delete it. That'll work too.

  3 this is it. Now you answer the prompt confirmation of uninstallation.

• Do not message not showing on a slide

  Hi, I'm working on a video simulation 9 Captivate. Slides, where is the screen of the software and then I have a "back" (as opposed to text slides or menu) button. On some of these slides, I have a click box, and I put in place a failure message. When I have the back button does not trigger the failure message.

  Here is the chronology:

  

  Here are the click box settings:

  

  I think it's because the back button and the click box have a break. I tried to move the point of break the back button before the break of the click box, the same time as the click box and after the click box and there is no difference.

  When I saw the box click works (so it goes to the next screen) and made the button back but it does not show the fail message if I click anywhere else.

  Any ideas? Patches? Workaround solutions? Much appreciated!

  JO

  Hello world

  Not sure that the question, but we have an easy solution. We put the back button in a model of slides. If that is set for the screens of simulation it doesn't substitute the suspicion of fail to click. Hope that helps anyone with this problem!

  See you soon

  JO

• AfterEffects CS6 will not show on my Adobe Creative cloud. I work in a school district. The error message is: ' we are currently experiencing some issues, please try again later. " If the problem persists, contact customer service. "It is to go

  AfterEffects CS6 will not show on my Adobe Creative cloud. I work in a school district. The error message is: ' we are currently experiencing some issues, please try again later. " If the problem persists, contact customer service. "This has happened during about two weeks, give or take. Everything is displayed. Are there patches? Thank you

  You MUST have a 64-bit computer and operating system... What is your computer?

  -Programs are supposed TO not view or download if they are not installed on your computer

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• How do you get a message that has been marked "do not show this message again" to reappear?

  How do you get a message that has been marked "do not show this message again" to reappear?

  Preferences > General > reset all warnings.

• Execute_query not showing - WORKING...-Message on Forms 10 g

  Hello
  
  
  There is a strange thing happening with our forms that have been migrated to 10g.
  
  (1) our keys are remapped to those used in the Version 6i. For example: CTL + L is F9
  
  (2) when a user press F7 and F8, Forms 6i, we get the message sequence:
  
  Enter a query; Press F8, CTRL + q to cancel
  then
  Work...
  
  and finally, we get the records.
  
  However, on form 10g, we have when a user press F7 and F8:
  Enter a query; Press F8, CTRL + q to cancel
  the - WORKING-message is not displayed and after a while, we get the records.
  
  There are no message_level before the enter_query or execute_query, and there is none: system.suppress_working in the form.
  
  What could be the problem?

  Steve,

  Set of tests I did did not show the message "Work"... "either.
  I think that this message is removed in 10g, that's why we have this small progress bar that keeps on moving left and right in the lower corner of the right side of the console window.

  I couldn't find any reference in the form Builder Online-Help on: System.Message_Working.

  Tony

• Receive messages, but only shows the header, not opening messages

  Yesterday, all of a sudden, download my emails, but only the header appears. No message. I have the two incoming POP and IMAP, both do the same thing. If I double-click on a message, a new window opens - no message - just the header. If I go on more, then Classic view - then I can see my message. But NOT if I put the classic view for all of the programming. That freeze the program.

  I can click on whatever I want on different messages, but nothing happens to change the header since the first message I tried to display. I can delete messages, but not to open them.

  She also took forever to download an email attachment in IMAP, but not messages from POP.

  Using Windows 7, this happened to the previous version and just upgraded to 38.0.01 to try to fix it. No luck.

  Is it possible to go back to an older version of Thunderbird and have this job?

  right click on the folder, select Properties, and then on the button repair.