My R1 - 131 T N3050 configured with Windows 10 again is slow. A simple upgrade of RAM works?

Similar Questions

• I just bought a refurbished with Windows 7 computer. I did a test drive of Works 9.0, and lacked features that I found.

  I just bought a refurbished with Windows 7 computer.  On my old XP computer, I used to use Word 97 and later also used a version of works that might have been 2004 (?).  (Usually I only used word processing and Excel.)

  I took a test drive of Works 9.0, and found features that I liked were missing, specifically:

  • Previously with Word I could draw snazzy borders on the table cells, which some had graduated shading that looked almost like a real 3-d picture frame.  These borders changed to something else (rather ugly) when I took an old Word 97 and load in Works 9.0 word processing document.
  • With a table created in Word 97, it was easy to summarize a bunch of numbers that were all stacked in a column (or do other types of math).  Could not do with the Works 9.0 word processor.

  (These features were absent from Open Office as well, or at best have been tedious to use.)

  Word usually has features more and better than the works (such as those mentioned above)?

  Any suggestions on what I should use for word processing? Should not be the latest version, but should be compatible with Windows 7.

  Office 2007 and later nothing will work on Windows 7 but do not expect the full set of features in Office 97. Office 2007 and beyond have their own sets of complete functionality... :-)

  The problem is the purchase of older versions of Office. Microsoft does not provide them and you won't get one of them cheap.

  Corel has always produced WordPerfect... http://www.WordPerfect.com/us/product/Office-suite/?sso_test=true

  Free and Open Office are the alternatives...

• I'm unable to install my Lightroom CD on a new computer with Windows 10. Is there a simple guide in plain English? I do not understand computerese.

  I'm unable to install my Lightroom CD on a new computer with Windows 10. Is there a simple guide in plain English? I do not understand computerese.

  Use a browser that allows cookies and pop-up windows, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," https://helpx.adobe.com/contact.html

• Any browser compatible with windows 98? Any OS capable of upgrade of windows 98 on a system with 6.4 GB HD and 64 MB of ram?

  Old computer card 64 MB ram & 6.4 GB of free hard drive of 75%. Eager to work, but can no longer access the internet. Running under windows 98 (old version)
  Any browser firefox that I can install that will work with windows 98?
  Any OS, I can switch the windows 98 that are compatible with the specifications of the computer?
  Computer backup only - dial with lotsa access old documents. Can't wait to trash.
  Me - computer not so read and write.
  All the advice - thank you. Very appreciated

  Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / me.
  
  Download here:
  
  FTP://FTP.Mozilla.org/pub/Firefox/releases/2.0.0.20/Win32/en-us/

• new computer with windows 8. scanner of HP all-in-one officejet 5610 worked but is now in offline mode.

  I have a new Dell with windows 8.  hp officejet 5610 all-in-one seemed fine, and I could scan and print.  Now, I can scan is no longer.  charms - settings - change the settings of Pc - peripheral watch HP Office Jet 5600 offline!

  He could have an update query of some software that I have authorized.  Maybe that's my problem?  How can I fix it?

  Thank you

  Hello

  Please download the drivers and Softeware full functionality from the following link and install it on your Dell:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=au&DLC=en&sw_lang=&product=441125#n195

  Kind regards.

• My PC (with windows 7) is too slow

  HY

  I have an i7 with Windows 7 Home Premium, and suddenly my PC become very slow (10 minutes) to open a program
  I tried a clean boot (with msconfig) and a virus scan but no result
  Any help please?

  If http://support.microsoft.com/kb/929135 makes no difference to the start time,

  What brand/model is PC, if a PC from a major manufacturer he has a diagnosis, which can be accessed from the initial splash screen?

• Bought a new computer with windows 7. "psc 2210 all-in-one ' will not work with it....

  I have a psc 2210 all-in-one printer that I love. I bought a new computer with Windows 7 and I can't make it work. The HP site said that I don't have to download the drivers because windows 7 has already installed, but the main thing is that I can't make it work. Anyone, please help. My printer works perfectly and I can't afford to buy another. (I have a 64 bit)

  HP should contribute to this situation. I'm a loyal customer of Hp, but it's ridiculous that they do not create a driver to work with their printers.  All computers are coming with Windows 7.  HP please find a solution!

  I could get my HP PSC 2210 all-in-one to print!  I don't know exactly, because I've tried everything I could think of.  My son is a computer on which it has upgraded to windows 7 (64-bit) several months ago - he was able to successfully print on my printer immediately.   I just did an install complete (I bought the full version, not upgrade) to windows 7 (64 bit) - a couple of days and I'm finally to the point where I'm trying to connect printers.  Here is what I tried... again, I tried several things, although I've been in that general area...

  connect the printer to the computer

  go to the CONTROL PANEL--> Device Manager

  Click the arrow to the left of the IMAGING DEVICES (to be developed)

  RT click on printer PSC 2200 (should be listed under imaging devices)

  Select PROPERTIES--> DRIVER, then uninstall

  Select / tick "remove the driver for the device.

  the printer will disappear from the Device Manager (and peripheral Imaging also if it was the only selection)

  Unplug the printer to computer

  re - connect the printer to the computer

  Device Manager automatically updated (takes a few minutes, the screen refresh let until the yolk! disappears).

  Go to the control panel--> devices and printers

  Select printer PSC 2200, select Customize your printer, then the printed test page

  I hope that you will get a valid test page.  If this is not the case, another option I tried was:

  Through the above scenario.  When you get to the step "select PROPERTIES--> DRIVER, then uninstall" Select UNINSTALL directly from this menu (be sure to select/check "remove software pilot")

  Continue with the remaining steps above.

  I also tried 'Update Driver' of one of the previous screens above... I would like to know if you have a bit of luck!   I'm sorry that's not accurate.  Yet once, I tried everything I could think of, and something finally worked!  (I don't think I tried to 'Turn off the pilot')   Good luck! .........

  ).

• I bought a PC with Windows 7 and since I've now upgraded to 10 Windows some of my system requirements have changed as I'm not sure which of the versions to choose to download to upgrade my software Adobe Reader plug in.  The first star is the drive

  I upgraded from Windows 7 to Windows 10 I need to update my card in Adobe Reader, including, since my upgrade, some of my system requirements have changed but I'm not very familiar with these two versions of the Adobe Reader software gave me.  They are English (1) 2015.008.20082 for Windows CD player and 2-Player 11.0.10 English for Windows.  I would be very grateful if I could receive some tips which versions are the most compatible with my PC.  Thank you very much.

  Both versions are also compatible with Windows 10.

• Not able to open the camera into my laptop which is configured with windows 8. Please help me solve this problem.

  I have HP laptop & upgrade windows 7 to windows 8, here I am able to see the camera, if I click it will open and display connect them a camera too in the background I see 3 tools with off mode. How can I open my webcam? You can help it. Not able

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• I have an old computer from Compaq with Windows 98 on it. Can I upgrade to Windows XP?

  I have an old Compaq that win98, I install Win XP on it? and it is quite easy to do?

  original title: the WINDOWS UPGRADE

  Check that the disc does not have OEM on it, and you have a bet to level or retail key to go with it.

  You should be able to run the install from Windows 98. If this is not possible your computer does not support boot from CD, you may need to run the install with a floppy disk.

  Please see the following:
  http://support.Microsoft.com/kb/316639
  http://support.Microsoft.com/kb/978307

• Want to fax with Windows XP, but he wants the CD for it to work and I don't have it.

  I want to fax using Windows XP.  When I try to set up and configure, a message appears that I have to use the Windows XP CD to continue.  I do not have this CD more.  What can I do to make it work.  He also says that I can use a network server.  I don't know what it is and how to use it.  Can someone help me?

  Hi TerrieStamey,
   
   
  -What, exactly, is a transcript of the error message?
   
   
  Try the steps listed in the articles below and check if it helps.
   
  Faxing in Windows XP
   
  How to enable and configure the fax service in Windows XP
   
  HOW to: Solve common fax problems in Microsoft Windows XP
   

  Kind regards

  Divya R - Microsoft technical support.

• Can someone tell me why I bought and installed Windows 8 when it does not allow me to do something that I couldn't already do with Windows 7? The new bells and whistles do not work >

  When I click on the various components on the start page, with a few exceptions, nothing happens. No people NO email doesn't appear, pop up, then what is the purpose of this page? In addition, this version makes it much more difficult to access the functions that were very easy front access.

  I do something wrong, but what is it and why worry?

  Thank you.

  Hello

  These could ease the transition:

  There is a good available at shop Windows free program - called Top Free
  "Windows 8 Cheat Keys.

  While on the screen type start - Help

  Or Win Key Q plus Apps search - help

  Or charms - Search - Apps - Help Menu

  After that the foregoing-> on left click-> Help and Support.

  ==================================

  Solution Windows 8 - left Center - learn more
  http://support.Microsoft.com/GP/Windows-8

  Meet Windows - a good start
  http://Windows.Microsoft.com/en-us/Windows-8/meet

  =========================================================

  Given that the Microsoft Community is a site of support of peer review is not really the
  best venue for your comments, but we will certainly try to help as much as we have with all the problems
  can.

  Use these resources to provide feedback:

  Windows feedback program
  http://WFP.Microsoft.com/

  Microsoft Connect
  https://connect.Microsoft.com/

  Provide feedback to Microsoft
  http://www.Microsoft.com/mscorp/Execmail/feedback.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My Peachtree 2008 and Excel work well with Windows 7. Y at - it a upgrade to Excel 2007 which will help me to solve this problem?

  It gives me an error that Peachtree is unable to locate my version of Excel.  How can I fix it?

  Shirley Byard Byardllc.com

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  The question you have posted is related to Microsoft Office, and would be better suited to the Office Discussion groups. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

   

  Thank you, and in what concerns:

  Aito - Microsoft technical support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Still struggling with windows 8.1 implemented - slow

  I have an all-in-one Aspire Z3-605 with a ghz processor Intel Core i5-3337u Intel1.80.  I'm not a gamer, use the computer for crummy with genealogy and general use.  Had to reset the computer of 8.0 to 8.1 after the problems with the updates of the system in August 2014.  The computer worked FINE with 8.0 in terms of speed, so I know it's a problem with the installation of 8.1. I've only had to be upgraded because of problems with the upgrade updates the 8.1 safety Aug - Sep 2014 MS slowed the system analysis of a snail. I run avast1 and ASC pro to maintain the system and run Belarc Advisor regularly to ensure there are no problems.  I use Firefox and not IE as my main browser, BUT I still use FF.  IE is installed and updated for sites that need to access

  All of my updates of system are in place, I checked the drivers and updates those requiring an update [I think].  I don't know if it's an old software instalation driver [s] but I went on: us.acer.com.ac/en/US/content/drivers and copied off lists of pilots with the dates [which I assume are the latest updates].  So, now I check each one to make sure it's the latest driver?

  One of my other thoughts on speed is all the stuff that could start up when starts it.  I uninstalled McAfee, Norton, etc comes with Acer and all games.  BelArc analysis gives me approximate deadlines for the use of different programs so I guess I can turn off those little-used and which would give a little more speed.  I looked at all the processes running, but I couldn't identify many specific programs so am a bit wary of doing much with it.

  I would be recognizing any suggestion - of course I don't have any idea what to do.  I've been playing with this for over 5 weeks now and am about to lose.  I have a backup off site [Mozy] more external hard drive so I don't lose files but I can't do anything, try to make of genealogy online is a joke, and it's lightning fast with 8.0 [I have a DSL line that is reliable and fast enough for the rural region where we live].

  If you try to uninstall Avast, reboot and check the overall speed?

• I have a gateway lt4008u with windows 7 starter. Can it be upgraded to full windows 7 or even windows 8.1

  I want to upgrade my HDD to the ssd in the hope that it would accelerate it. How to save the old startup information or should I try to upgrade to windows?

  You can try Acer but they will only the PC recovery discs, if that.  -Acer support Answers, E-Mail, Chat - how can I restore my computer using the eRecovery Management program

  But then you could Clean Up Factory Bloatware to recover some lost against indigestion of factory performance.

  Have you tried other options in step 1 to clean Windows 7 reinstall ?  Easier is to borrow DVD a friend in order to extract the ISO, to unlock all versions and burn a new. If nothing else is available, you could buy a reinstall of Windows 7 cheap DVD (make sure that there not only repair, but includes all versions) on Amazon.

  What I would try is first of all instead use Macrium Reflect is a free and easy to use backup utility to save a System Image on an external hard drive you buy or borrow, and then start the backup media it will help you make using the Key of the BIOS Boot Menu

  to restore the image to the new drive.  I'll help you get through this, because using Macrium is easy once learn you it.  Read the link and then request return all what you need to know.