My speakers are plug but he repeats to me is not

Similar Questions

• How can I get my larger type? In addition, my speakers are plugged in, but cannot get sound

  I just did a reinstall due to a virus - I try to get my b type
  more grand-don't know if this is a firefox issue - also, my speakers are
  plugged in, the light is on, but can't get sound - I tried the sound on the background icon, it's Max

  Hey Red552mimi,

  Have you tried to increase the zoom? This is a good option if everything on the page, in addition to text, is too small. Just hit CTRL and + a few times to zoom in. CTRL and 0 will set the zoom back to normal.

  If you just want to change the font size, you should watch section of the Knowledge Base on the accessibility in Firefox - make Firefox and work of content for all users. There are lots of good information in there.

  In regards to your sound problem, have you looked at what to do if Firefox will play all of the sounds and difficulty common audio and video questions?

  Hope this helps!

• speakers are connected but not detected! Help, please!

  I tried to plug in my sound souround in my lap. Well the wires accidentally touched something and then there is a loud noise, of course, we were surprised & so after numerous attempts, trying to have his surround for the computer, we couldn't hear anything so I gave up & just connect the speakers to the computer again in the tower. Well we couldn't hear anything now! I tried to watch a movie and NOT of HIS! We tried pluggin helmet & still nothing! & now even if the speakers are plugged and his saying that the speakers are not detected even if their plugged in! But if I check the sound I can see that the lines for the volume are moving up and down, but we can't hear anything! so I called a computer tech and he said that sometimes the sound is changed well I changed the sound and he was trying to detect the speakers, but it is still saying that nothing is plugged into the Speaker Jack when they are! Computer Savy not so much need help please! Blow something?

  Hello

  The steps in the article would solve that problem.

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Also, try to use the same system on another computer sound and check if it works well.

  Let us know the status of the issue.

• How to connect to bluetooth speakers in windows 7. the speakers are broken, but where do I select them as an audio on the device?

  I have connected to my Belkin I 78 audio device, it is paired with my Acer laptop, but the device does not appear in the settings as an alternative the device sounds. The ability to use Audio service is selected on the Belkin device in the bluetooth settings.
  The Belkin unit works very well with my Windows mobile and my Android tablets and phones

  Hello

  Note: Check if the Bluetooth speakers are listed in Device Manager.
  
  Method 1: Run the hardware troubleshooter and check if that helps.
  Follow the below mentioned article:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
  Method 2: Follow the steps mentioned below:

   

  (a) right click on the speaker in the taskbar icon.
  (b) click on playback devices
  (c) right-click on the empty space
  (d) select Show disabled devices and Show disconnected devices
  (e) see if the Bluetooth speakers are visible.
  (f) if they appear, select and make a default device.
   
  Method 3: Install the software that came with the speakers, then check.
   
  Reference:
   
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices 
   
  Note: The article also applies to Windows 7.
   
   
   

• try to open a document, but he repeats to me is not a valid bitmap file or format

  Yes im trying to open a document, but he continues to say is not a valid bitmap file or format is not supported currently it please tell me what this means and what I need to do

  Thank you

  It's pretty, that makes what he says - the file is not a valid bitmap file, or it is damaged or it is not formatted properly.  Contact the source for the file and ask what program you need to open and use this program to open it.

• Internal speaker satellite L555-110 will not stop if external speakers are plug

  Hello

  Realtek Audio drivers L555-110 with Windows 7 32 Bit (via recovery).

  If I plug in external speakers, Realtek ask you if they are external speakers and then these exetrenal speakers, but ALSO the internal speakers of survey not very good.

  -> Y at - it a trick of configuration to switch the internal speakers and use only those external?

  Thnax 4 support!

  ZIALO

  Hello

  You can change the settings in Realtek audio Manager located in the control panel.
  There should be a tab named IO or something like that
  Right, you will find the headphone plug and microphone make a right click on the headphone plug and check if the internal speakers enable has been activated

  See you soon

• No noise - volume control appears, the speakers are connected, but without audio

  My computer has recently undergone several virus attacks, which I was able to resolve after a lot of enslavement. However, now I find out that my computer has no audio. Occasionally, when I'm trying to be able to control the volume, it is said that there is no installed audio mixers. Currently, it opens the volume control but does not play any audio during the test. I have a Dell XPS 410 desktop computer.

  * Update *.
  Ran the Microsoft Fix It program for playing audio and received this error message:
  "Troubleshooting cannot continue because an error has occurred. We're sorry, but the program encountered a runtime error. Please try again later. [Code 80070005] »

  Hello

  If I understand correctly that you are unable to hear the sound, train your Windows XP-based computer, and you are away from your computer's Volume control option. In addition, you tried to solve he problem by running a fix it software are Microsoft and received an error code 80070005. I reason?

  The possible reasons for the question may be a corrupted driver or audio software.

  Please provide the following information for a better understanding of the issue.

  1. is the specific question of the sound form a specific program?

  2 what was the recent change of hardware or software tempted right computer before the show?

  Lets start troubleshooting, the drivers installed and move forward.

  Method 1

  Step 1

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Step 2

  Download and install the drivers from the Dell website

  http://www.Dell.com/support/drivers/us/en/19/product/XPS-410

  See also,

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

  To display the volume control icon in the notification area

   

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/soundscpl_common_tasks.mspx?mfr=true

  Hope this helps

• Tamia, who grinds speakers are all of a sudden and I have not changed anything I have windows xp

  I think someone was on my setting for the sound that I don't know everything that I know is thatit is very aggravating

  Hello
   
  You can check this link which can help you to solve your problem:
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Speakers are not listed to choose by default.

  Original title: help! My speakers are gone!

  I need help.

  I wanted to watch a movie with a helmet, so I plugged and went to hardware and audio in the control panel.

  I selected 'disable' for speakers and 'activate' for my helmet.

  But when I came back the next day, my speakers have gone on the menu I disabled from and when I plugged in my headphones they didn't either!  the speakers are plugged into an altec lansing subwoofer-black box-thing and that is connected to the Green Lane at the rear of the hard drive and has always been. Headphones are a portable dvd player and work on a 3.5 mm jack.

  Help, please!

  Hello
   
  Connect the speakers and then follow the steps below.
   
  Method 1.
  

  Exercise the functions mentioned below to set the speakers as default:
  a. Click Start, and click Control Panel.
  b. click sound, and then a new window will open.
  (c) in the new window click on the tab 'Read' and right-click in the window and click Show disabled devices.
  d. check if the speakers are listed and then right-click on it and choose activate.
  e. Select this headset, and then click "Set as default".

   

  You can also check the methods of additional troubleshooting for any of the problems of its in the article below.
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
   
  Method 2.
  a. run a Microsoft program that automatically diagnose and repair problems with sound and audio on your Windows Vista-based computer.
  To do this, click on this link and follow the instructions:
  No sound in Windows
  http://support.Microsoft.com/GP/NO_SOUND
  
  Method 3.
  You can uninstall the audio drivers completely from the Device Manager and re-install from the manufacturer's Web site.
  I would also recommend to check if there are Windows updates for this device.
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Repeat the animation sequence (not whole movie)

  Have a mini-animation (which is in the background) that I want to repeat throughout my film. I know that I can copy/paste the sequence in the timeline again and again, but I imagine that there is an easier way to get the sequence to repeat? I tried gotoAndPlay (1); but it takes up the entire flash, not only the specific layers involved in mini animation.

  "isdg" wrote in message
  News:e4ac6b$M87$1@forums. Macromedia.com...
  > Have a mini-animation (which is in the background) which I want to reiterate
  > throughout my film. I know that I can copy & paste the sequence in the
  > timeline
  > again and again, but I imagine that there is an easier way to get the sequence to
  > repeat? I tried gotoAndPlay (1); but he repeated the whole flash, not only
  > the
  > specific layers involved in mini animation.
  >

  You will need to put the background in his own movieclip animation.
  Then you have even the gotoAndPlay (1), because unless you have a
  the mc stop() action will start automatically above.

• When I plug my headphones in the front jack 3.5 external speakers are NOT dumb

  Hello

  I recently reinstalled Vista Ultimate on a bigger hard drive, but now I have a problem with my audio devices.
  (1) when I plug in my headphones to the port of front 3.5 mm external speakers are NOT dumb.
  (2) the only way I can switch from headphones and speakers is by right clicking the speaker icon in the notification area, click playback devices and "Set is device by default", followed by restart the video or itunes.
  Can someone help me with this.
  In addition, and I don't know if it's related, but in device under 'Other devices' management, the SM Bus controller has a yellow Triangle with an exclamation mark inside.
  Thanks in advance for any help
  Concerning
  Rob

  This is controlled by the hardware itself or the driver software.

  You can try to install the latest audio drivers available from the manufacturer.
  If this does not work, you can try to contact the manufacturer for assistance.

• DOESN'T HELP WINDOWS 8 NO SOUND! DON'T KEEP SAYING THE NO SPEAKERS OR HEADPHONES ARE PLUGGED IN!

  CAN SOMEONE PLEASE HELP ME UNDERSTAND WHY, AFTER A RESTORE! I DON'T HAVE SPEAKERS OR HEADPHONES SOUND IT JUST CONTINUES TO ME SAYING THAT IT NOT PLUGGED AND THEY ARE TOTALLY?  IV ' E MADE THE DISORDER SHOOT SEVERAL TIMES HE ALWAYS REPEAT MYSELF THAT NO SPEAKERS OR HEADPHONES ARE PLUGGED! I HAD HER JUST BEFORE THE RESTORATION IT IS MESSED UP SO MY COMPUTER IS WINDOWS 8 GATEWAY DESKTOP MODEL... DX4375

  ALL INFORMATION IS GREATLEY APPRECIATED :(

  Me_26

  Uninstall the current driver, then install a new one (even if it is the same date)

• My iPhone think that my headphones are plugged when they are not if will not play music or alerts through the speakers. What should I do?

  My iPhone randomly started thinking my headphones are plugged when they are not. As a result, it won't play music or message/call alert through the speakers. What should I do?

  Try to push the helmet a few times to move the switch. If not, then please post something here and I'll be happy to help you further.

  AppleMan

• "No speakers or headphones are plugged."

  After a reinstall of windows 7, none of the external speakers work.  The reason given is "no speakers or headphones are plugged."

  What I tried:

  -Enter in the BIOS to make sure that the integrated audio system is selected (instead of link to my video card)

  -Redownloading drivers (all are currently being updated)

  A few notes:

  -Under 'Read' in the control panel > Sound, "Digital Audio (HDMI)" appears with "not connected."  There are no other options to select.

  -My USB headset works perfectly - is that the external audio is not working.  The plugs at the front and the back of the computer both don't work (which I tested with multiple devices).

  Data for the audio device are listed here:

  Name High Definition Audio Device

  Manufacturer Microsoft

  ID of device PNP HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1001\5 & 17DD3F07 & 0 & 0001

  Thanks for the tips - I downloaded the codecs and it works fine now. (Here: http://www.asrock.com/mb/download.asp?Model=N68-S%20UCC&o=All)

• The menu "Edit in" is completely idle. All plug-ins are visible but gray; that is not accessible. No idea how to fix? FYI: I use LR 5.7.1 on MacBook with Mawericks.

  The menu "Edit in" is completely idle. All plug-ins are visible but gray; that is not accessible. No idea how to fix? FYI: I use LR 5.7.1 on MacBook with Mawericks.

  There are chances that you are working with smart insights? External editors are not available when you work on smart insights.