My speakers are white noise from time to time even when no audio plays

I have a gateway all-in-one and for some strange reason, I get some white noise on the occasion of the left speaker. -What or is it a fan there that makes noise.

Another possibility is static for several other power cords?

Also, most based GSM cell phones can cause this is the phone is close to the speaker (s).

Tags: Windows

Similar Questions

  • My macpro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

    my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

    If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.

    Good day.

  • Action of the trigger to set time or when the audio is finished?

    Is it possible somehow form to trigger an action at a certain time or when some audio is over? It is built in function in the Storyline articulate so I wonder if Adobe wizards have figured this out.

    I'm looking to adjust a variable when the voice-over that basically says that the slide is complete is complete. I know how to do this with buttons and on the output but even on the output does not work properly because the user can leave the slide without completing the audio.

    You would probably need to build or buy a widget.  There used to be a widget that could be used to perform actions based on time.  It is listed on this page:

    http://www.Infosemantics.com.au/widgetking/the-widget-pages/

    However, I do not know if there is a compatible with Captivate version current version 7.  You must ask the Director Jim Leichliter.

    http://captivatedev.com/2012/09/26/adobe-captivate-6-0-free-widget-time-based-actions/.

    In addition, since it is a SWF widget it would be not compatible with HTML5.

  • White noise from speakers

    I recently installed Cubase as part of my university course.

    The sound works well in Cubase, but now whenever a system of sound or any other playback sound is indicated I get white noise.

    The volume mixer seems functional and green bars seem to respond as if the sounds were correct.

    I guess that Cubase invoked his own driver, or something and has not put in place.

    Any help is appreciated!

    Chris

    Just for test, try to uninstall this software and restart your PC and check if the problem happen again?

    If so, report it to the Publisher of the software.

    Try updating your sound card.

  • Satellite P750 makes funny noise from time to time during playback of music, etc..

    I like to play a lot of music on my laptop, but lately this strange keeps randomly which occur. It almosts seems the track froze upwards, but this isn't because he continues to play (like a disk scratched in a cd drive freeze?).

    It's just from time to time, but it is very visible, especially when we played through my good external speakes. It occurs through the built-in speakers, standard headphones and external speakers.

    I was wondering if one has ideas of what is and how can I solve this problem, because it's really annoying me.
    Thank you

    Your ad is quite general and there is not a single relevant info that can help us understand the problem described.
    Music can be sound you hear while you watch movies, audio CDs, MP3s, internet radio, and so on.

    This happens in the case or how to understand this?

  • How to connect to bluetooth speakers in windows 7. the speakers are broken, but where do I select them as an audio on the device?

    I have connected to my Belkin I 78 audio device, it is paired with my Acer laptop, but the device does not appear in the settings as an alternative the device sounds. The ability to use Audio service is selected on the Belkin device in the bluetooth settings.
    The Belkin unit works very well with my Windows mobile and my Android tablets and phones

    Hello

    Note: Check if the Bluetooth speakers are listed in Device Manager.

    Method 1: Run the hardware troubleshooter and check if that helps.
    Follow the below mentioned article:
    Open the hardware and devices Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
    Method 2: Follow the steps mentioned below:
     
    (a) right click on the speaker in the taskbar icon.
    (b) click on playback devices
    (c) right-click on the empty space
    (d) select Show disabled devices and Show disconnected devices
    (e) see if the Bluetooth speakers are visible.
    (f) if they appear, select and make a default device.
     
    Method 3: Install the software that came with the speakers, then check.
     
    Reference:
     
     
     
    Note: The article also applies to Windows 7.
     
     
     

  • Web pages empty every time, even when I work around cache!

    I checked with managers from sites that the pages are not really empty. But firefox only shows the Virgin every time. (Even when I bypass cache by pressing SHIFT and click on the update.)

    How can i solve this?

    Here is a space that should not be:

    https://creative.Adobe.com/plans?plan=edu

    Thank you!

    This problem may be caused by corrupted cookies or cookies that are blocked.

    • Check the permissions on the subject: permissions page and in "tools > Page Info > Permissions.

    Clear the cache and cookies only from Web sites that are causing problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe

  • I get a lot of 'noise' on my graph labview even when no sensors are connected. Any suggestions as to what this might be?

    I'm trying to set up a test bed to measure the linear moving of a hydraulic cylinder and it trace over time to a graph in labview.  I was getting erroneous readings on the grapn (a point of tension for every ten samples).  I have disconnected the wiring of the Terminal Board of my data acquisition card and the chart fills with 'noise '.  If I remove the plate Terminal and move the wire that goes to the data acquisition card, the graph becomes fixed.

    Any suggestions as to what can be causing this?  All of the components are new, but would it be a bad block, the driver or data acquisition card?

    Thank you


  • I constantly hear a maintenance program and the music, talk, news, music etc through my speakers, it overlaps another medium, he plays all the time even when I'm offline?

    ?????????

    Hello
     
    This happens usually if some programs running in the background. Make sure that there are no programs running. This also occurs if the mixer settings are changed. To check the settings on the mixer, try the following steps.
    1. click on the volume in the taskbar icon.
    2. click Mixer, switch to the cursor at the lowest for all applications.
     
    To restore the sound on the computer settings automatically, download and run the Microsoft fix it and check the result.
    Visit the link, click "Run now" and follow the instructions in the wizard: http://support.microsoft.com/gp/no_sound
    If the problem persists, try the steps mentioned in this article to find out which is the origin of the problem: http://support.microsoft.com/default.aspx/kb/929135

    NOTE: Follow step 7 to start the computer as usual.
     
    Post back with the results, so that we can help you further.
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Dell Inspiron 15r white noise 5537 - helmet

    Hello

    A week ago I bought an Inspiron 15r 5537 brand new, and I just for the first time used with the laptop headphone. However, whenever I tried to use the headset with the mobile there is a significant amount of white noise emitted by the helmet (in a volume which is sufficient to divert the attention of audio playback).

    White noise starts when the audio is released and continues even when the audio is paused (or ends), but cut abruptly from 5 to 10 seconds after the end of the audio...

    Laptops have the speakers don't emit white noise: when my headphones are plugged in fact that the problem occurs.

    Any help would be appreciated?

    See you soon,.

    Scott.

    P.S., Computers are not particularly my area of expertise, so no simple statement would be ideal for my brain to benet...

    Scott, it seems to be a problem with this model. Here is the main thread where the owners have discussed the issue for 6 months without any resolution. Some say that you use the Windows driver audio native gets rid of the noise, but others say that it does not help. If you want to install the native driver, this is one of the ways to do this:

    1. open Device Manager (type devmgmt.msc in the start search box and press ENTER) and then right-click on "Realtek High Definition Audio" in the sound... Category of controllers.

    2 Select this option to "Update driver software". [This screen shot is of a different model that IDT audio - yours will be "Realtek High Definition Audio".]

    3. click on "Browse my computer for driver software".

    4. click on "Let Me pick from a list of drivers on my computer".

    5. put the "Show compatible hardware" check box if not already checked.

    6. in the list of devices, click on 'High Definition Audio'.

    7. click on "next".

    8. in the update driver warning box, click 'Yes' (the driver).

    9 restart the portable computer if you are prompted. If not invited, so no need to restart.

    10. to reinstall the Realtek driver, repeat the process but select the Realtek driver to step 6.

    Note that even if you use the native driver eliminates the noise, he may not be a satisfactory solution because it is a generic driver that lacks some of the features of the pilot of the provider.

    Don't forget that there is a short return period during which you can return your defective laptop. After the expiry of this period, your remaining option is to obtain the warranty service, but a solution could not be achieved.

  • Noise from HDD on Portege R830

    Hi all!!

    I bought my Portege R830 for almost 6 months and sometimes I hear a little sound coming out of the computer as a small hiss... when the pc is the treatment...

    I think its coming from my HARD drive... is - it normal in this model?

    Thanks in advance!

    HARD drive creates some noise as a cooling fan is making noise
    Therefore it of difficult to say what part product that said noise

    Ask yourself if its normal?
    Well well, my computer s portable HARD drive creates noise from time to time in particular, then it seems that the disk head moves

  • Equium A100-147 - clicking noise from the HARD drive

    For awhile, I had clicking noise from the HARD drive and when the laptop could not, I assumed the reader was packed but trying a replacement nothing happens. I get a blue light for battery and a blue light (low) for the supply of direct current, but nothing for power or disc. However, when I plugged in an external drive yesterday it starts fine and when I unplugged the laptop continued to work the internal drive. But even once this morning he died and will not start. I read that the BIOS can stop recognizing the drive or maybe that the settings are not being saved when it is off. Could it be the motherboard battery?

    > reading the BIOS can stop recognizing the drive or maybe that the settings are not being saved when it is off

    Enter the Bios (press f2 at startup) and check if it recognizes the hard disk. You can see on the home page or the boot option in the Bios.

  • Message are emerging at different times and in disorder

    My Skype messages I below to send messages to my contacts and sometimes even says they are one day ahead or back. Even when it says the exact time their Skype message appear above me and it is impossible to read because I have to keep scrolling to the top to read. I use the latest update of Windows 10 and Skype 7.17. Any ideas?

    http://community.Skype.com/T5/Windows-desktop-client/Skype-chat-messages-are-in-the-wrong-place/m-p/...

  • Vista Ultimate x 64 freezes randomly even when you are not running applications

    I feel the random system freezes from my PC. My PC Spec is below. Even if being run without applications and the system is on the desktop system will freeze randomly (can not move the mouse and the keyboard does not respond) and will force me to restart the system manually. I noticed an error message in the event viewer what cultures upward each time that this gel coming and I was wondering if you could provide me with a solution?

    Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

    I have included my PC specs and components below, but it is unlikely to be a hardware problem most of the time, even when focusing on the computer with 'memtest' etc it will not break.

    Power: 800 W

    [Product information]
    * Product type: motherboard
    * Product model: M4A78T-E
    * Product S/N: 93MOAI569328
    Place of purchase: www.scan.co.uk
    * Date of purchase: 2009/6/7

    [Map mother specifications]
    * Revision of the motherboard: 93MOA1569328
    * Card motherboard BIOS revision: worm 2208

    [VGA Card Specification]
    * Supplier of the VGA card: GIGABYTE
    * VGA card model: GV-R467ZL - 1GI
    * VGA card Chipset: ATI RADEON HD 4670
    * VGA card driver: 8.563.0.0

    [CPU specifications]
    * Provider of CPU: AMD
    * CPU Type: PHENOM II X 2 550 BLACK EDITION
    * Processor: 3.1 GHZ

    [Specifications memory]
    * Memory seller: CORSAIR
    * Memory model: XMS3 DDR3
    * Memory: 2 X 2 GB

    [HARD drive specifications]
    Seller of HARD drive: WESTERN DIGITAL
    HARD drive model: CAVIAR BLACK
    HARD disk capacity: 160 GB

    [The module map specificatio]
    Seller of maps add-on:
    Type of card module:
    Model of card module:

    * Operating system: Vista 64 bit

    Hello

    Try the clean boot method, which is a process of elimination to see what could be the cause
    the question. Pilots also have an influence on the performance of the system so I would update those
    as well.

    Norton has been known to cause strange problems on some systems, so I would use the
    Norton Removal Tool to check its impact. The following recommendations for free
    replacements, so you have good protection while check you this. Download all
    replacements before you remove Norton and install after removing and resetting.

    Download - SAVE - go to where you put them - click on - RUN AS ADMIN
    (Norton Removal Tool and others)

    Norton Removal Tool
    http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

    List of tools to clean/uninstall anti-malware programs
    http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

    -------------------------------------------------

    Here's what I use and recommend: (these are all free and very effective versions.)

    Avast and Prevx proved extremely reliable and compatible with all I have
    launched on them. Microsoft Security Essentials and Prevx have also proven to be very
    reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

    Avast Home free - stop any shields is not necessary except leave the file system, Web,.
    Operational network (Script and behavior are also recommended in Ver 6 +).

    Prevx - Home - free

    Windows Firewall

    Windows Defender (is not necessary if you use MSE)

    Protected IE - mode

    IE 8 - SmartScreen filter WE (IE 7 phishing filter)

    I also IE always start with asset if filter InPrivate IE 8.
    (It may temporarily turn off with the little icon to the left of the + bottom
    right of IE)

    Two versions of Avast are available 6.x and 4.8 x

    Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
    Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
    Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
    Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
    disabled - click OK
    http://www.avast.com/free-antivirus-download

    Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
    and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
    Finish those you don't use).
    http://www.avast.com/free-antivirus-download#TAB4

    Or use Microsoft Security Essentials - free
    http://www.Microsoft.com/Security_Essentials/

    Prevx works well alongside MSE or Avast

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
    programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
    Use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp?prevx=Y   <-->

    PCmag - Prevx - Editor's choice
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
    would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
    (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
    never find anything of note that I started to use this configuration.
    http://www.Malwarebytes.org/products/malwarebytes_free

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

    My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

    Time Machine backup to a sparsebundle.

    The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

    Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

    You has of course set the exclusion in Time Machine?

    By default, Time Machine will exclude your second drive unless you have included it. Did you?

    Once you get to this level during the backup, you can do a full restore manually whenever you want.

Maybe you are looking for