My symbols transformed into a red fill color Uni

Similar Questions

• Symbols - how to change the fill color to a mouse event?

  I'm trying to convert HTML Flash animations.

  I have some problems with the symbols of the Edge. As a test, if I create a new symbol of circle I draw and call that the new 'Test' symbol, I then try to change the fill color in a scoring event.

  I tried this:

  Enter the code to be run when the mouse points to the object

  SYM. $("Test") .css ("background-color", "red");

  That, in fact, change the "background color", but NOT the fill color of my symbol. See the example below.

  So then how should I address the symbol 'Test' if I want to change the FILL color is an event like the hover?

  TIA!

  Use:

  sym.getSymbol("Test").$("Ellipse").css ("background-color", "red");

  where "Ellipse" is the element of circle inside the symbol

  HTH,

  Vivekuma

• JavaScript to perform the Action on the ground form - change the fill color according to requirement

  Hello world

  I apologize if this question has been asked already - but I was looking for the last hours of the couple and not finding what I need. I have a PDF form (created from an excel file) and need to change the fill color of a field drop-down list box to, based on the selection made by the user of this form field.

  Details - I have several questions on the application form. I have install a form field list box for each question so that the user can select the following options:

  Yes

  NO.

  Not sure

  I see in the Properties menu of the form field that I can perform an action when their "clicks of the mouse to the top" as the trigger (option run JavaScript); but I do not know what script to enter to do. This is where I need help

  So I need the script when the user selects one of the listed options, the fill color will change depending on the selected answer:

  'YES' changes fill with green color

  'NONE' red fill color change

  Yellow fill color of changes 'UNCERTAIN '.

  Please let me know if you need more details or a better explanation of what I need. Thank you for anyone who can help!

  PS - I'm a complete amateur in any type of JavaScript or codes, so I may need some explanation or if this is not possible.

  Do not use the mouse event to the top, but rather, you can use the custom following validation script:

  Custom script to validate combobox

  (function () {}

  Switch (event.value) {}

  case study "Yes":

  event.target.fillColor = color.green;

  break;

  case "No":

  event.target.fillColor = color.red;

  break;

  case 'uncertain ':

  event.target.fillColor = color.yellow;

  break;

  by default:

  event.target.fillColor = color.white;

  break;

  }

  })();

• RGB mysteriously transformed into sepia when exporting PS CC.

  I am newer to PS creative cloud. I work on a MacBook Pro. The research of a few essential tips.

  When you work with Photoshop, you work with your files in RGB or CMYK?

  And then, you export the file in RGB or CMYK?

  I encountered some problems with files RBG mysteriously transformed into a ghostly sepia color when I emailed, downloaded or had turned into prints.

  Any help would be appreciated!

  Looks like you save in a color space such as ProPhotoRGB, that do not support most web and mobile devices. To do this, you will need to save color sRGB space.

  Many people work and save RGB and only use CMYK when you print.

  Benjamin

• Create gradient mesh object, object is transformed into a gradient mesh object w / white fill

  Create gradient mesh object, object is transformed into an object gradient mesh w / white fill automatically.

  I would like this to be a stroke object, because I do not see the image I'm trying to recreate.

  Illustrator is not allow me to change the white background in a line after creating the gradient mesh object.

  Here is the picture when I try to create the gradient mesh object, I don't have the option of white fill and the image always

  becomes a white fill gradient mesh object.

  

  Please can someone help?

  Thank you.

  Sure. A gradient mesh will have strokes. She will always be fills. If you don't want no fill, you must set the opacity of 0% unique mesh point. But you actually want to do that for the entire grid, because it will be a lot of your time to adjust back to 100% for each unique meshpoint with their colouring.

  The usual configuration is rather with the two layers. Allows you to see the gridlines and the model. Then you first set the grid (the color any for this). Then you choose the model colors to color the unique mesh points. From time to time, you switch to preview to admire your work.

• ___Is there a way to auto-update a chart once it is transformed into a symbol?

  ___Is there a way to auto-update a chart once it is transformed into a symbol?

  For example - I did a circle as a symbol, and it's in my document 100 times - is there a way to edit each instance so that it becomes a square?

  In addition, can I have the living text in it that replaces (ie. a circle with the 'new' inside becomes a square with "improved" in there).

  Thank you

  Ryan

  Yes

  create the replacement

  drag it above the symbol in the symbols palette all holding the key pressed ALT

  (or whatever ALT equivalent slot MacOS)

  all existing symbols updates again symbol

  See Help file

• ("Subform1.Name.ui. #textEdit.border.fill.color ')-wht is 'UI' here?

  Hello

  I'm new to Java script to an interactive form, when I saw adobe help, I found the slot block.

  The background color of the area to fill script
  When you set the background color or the area to be filled for each text field, it must Access your scripts to properties that require a term of reference for syntax that includes the sign sharp (#). Because JavaScript interprets correctly the pound symbol (#) in the expressions of the reference syntax, the script uses the resolveNode method to solve the expression.

  xfa.resolveNode("Subform1.Name.ui.#textEdit.border.fill.color").value = "153,204,255";

  xfa.resolveNode("Subform1.Address.ui.#textEdit.border.fill.color").value = "153,204,255";

  Pls. Let me know
  (1) here, which is "ui" (I knew user iterface, but, why he kept here)
  (2) he said, ' # ' will not interpret correctly @! Then, whty is it recycled here?
  (3) where can I find the numbers that represent the physical visible colors, like "153,204,255" IS here blue
  (4) wht is "xfa"?
  (5) WHT IS 'resolveNode"here?

  Hello

  I'll do my best to try to explain.

  You agree involved scripts, which can be difficult to transfer from one form to the other.

  1. "ui" stands for the user interface and is the method to access the visual appearance of the object, for example the fill color. The script can be simplified to Subform1.Name.ui.oneOfChild.border.fill.color.value = "255,255,255";  See an example here: http://assure.ly/ewrLMo and John Brinkman's blog: http://blogs.adobe.com/formfeed/2008/10/exclusion_groups_v20.html.
  2. I'm not sure what JavaSctipt would be interpreter the #, but I know that # is required when you use this method. As I said above, the script can be simplified, so that you don't need to specifically refer to the className of the object (textEdit).
  3. The colors are expressed in red, green, blue (RGB). You can explore the colors at http://kuler.adobe.com/.
  4. "xfa" is synonymous with Architecture of XML form. There is a strict structure for the objects in the hierarchy. In addition, there are a number of Document object models, one of which is the xfa.resolveNode of XFA DOM. is scripts against this model. It's heavy stuff, and I am struggling to describe correctly.
  5. Have a look here on resolveNode: http://assure.ly/kUP02y.

  The concepts here are quite complex and you will need to read up on the topics.

  I really hope this helps,

  Niall

• change the fill color of button using action script.

  Hi guys... How to change the color of button using the action band. for example, I created a button, and the fill color for the button is green now. After I clicked on the button, I want the button to change the red color.

  If the text is a child of the button, it will be changed by this code.  to remedy this, you must use a background for your button and convert it to a movieclip (if you do this in the authoring environment).  Give it an instance name, as the bg.

  You can then apply the transform.colorTransform to yourButton.bg

• CW3D chart fill color question

  Hello

  When I use CW3DGraphLib_CWPlot3DSetFillColor on a lot that I created in the IUR, everything is OK apart that the value of blue is actually red and vice versa with the red color value.

  When I add a new path using CW3DGraphLib_CWPlots3DAdd and then change color with CW3DGraphLib_CWPlot3DSetFillColor the color displayed is not the same when I put the same color value to the plot that I created in the IUR.

  Worse still, it is not possible to set the color in white or black. RED, GREEN and BLUE have the same value, the result is always gray.

  What I did wrong?

  Please find attached a test program that demonstrates this behavior.

  Bertrand

  Hi Bertrand,.

  I found the other setting, you need to change to get the fill colors to look right.  When you create a new path, the new path takes the properties of the PlotTemplate object.  In this case, the default PlotTemplate object has the property ColorMapStyle the value "1 - cwShaded" by default.  If you change this "0 - cwNone ', the behavior will be the same as your other parcel of land.  Please let me know if you have any questions!

  

  NickB

  National Instruments

• OBIEE 11 g (11.1.1.7.1) mapview - no fill color

  Hello

  I need some help here:

  We have a project that requires that we display data on a plane on obiee 11 g. After creation of spatial metadata about the database and have created themes on the map and created a source of data, in MapViewer, and imported all these themes into obiee (Administration > manage map data > import layers and reference cards).

  The challenge that we have is, there is no fill color on the display card or any form of presentation data even you there is data on the table view. The map view is empty, none of the themes display data as expected.

  Your help would be appreciated, thanks.

  Hello

  We found the solution from another blog that was created earlier:

  OBIEE - MapView does not appear the BI data layer

  Thank you

• Change the fill color based on the range of values

  Creating a form to inspect the parts. Work on the setting up of a text field to change the fill color based on the number or the data entered. For example: If is between 0-20 fill color is red, between 20-24 fill color is green, more filling 24 is still red, and if no data is entered in the fill color is white. The script below works for me but keeps the red field when data is deleted (empty) field. Not sure if im approaching this correctly so I should be looking at differently? I have different ranges for many fields and im trying to keep the script right to the front as possible. Thanks in advance for any help.

  If (event.value > '24')

  event.target.fillColor = color.red;

  Else if (event.value < '20')

  event.target.fillColor = color.red;

  else event.target.fillColor = color.green;

  You do not have... Change this line:

  Else if (event.value > '24')

  To do this:

  Else if (event.value > 24)

  And even with "20".

• New text is always black instead of my currently selected fill color.

  Does anyone know a way to change this? So that I could choose, say, a shade of red for my fill, then click to create a new text box and have what I type be red? Now it always sets the fill color to C0M0Y0K100 now, I create a new text object. Which can be a total pain in the * if I happen to work on a black background.

  I have 'new art has basic appearance' off in the appearance palette, this isn't that.

  Some googling gives to think that I can change what the text insists on being of faffing round in panels of paragraph or character style, color, but is really not much better - I want to make it behave like the rest of the program, where my background and outline colors remain unchanged until I have change myself.

  Anyone got all solutions to this beyond "go report bug and maybe it will be fixed in five years?" I'm tired of my new items text by alt - drag an existing one in the color I want.

  What the hell no mod Forum Adobe the right answer isn't 'do my text, then set its color. The correct answer is "you can't do this because someone at Adobe thinks it is a good idea for the text tool do not walk as the rest of the program, go apply for a feature or a bug report. What I've done.

  My problem isn't that I don't know how to change the color of my text. I can do that very well. I did it several times I could even begin to estimate - almost every time that I went to bed a text object. My problem is that I have a colour that works perfectly with my image, then I click with the text tool and all of a sudden, I type in black. And when I cut and paste a few words of the text object to another, Illustrator also "useful" makes black. Even if neither the text I cut myself, or sticky, is black.

  It's especially infuriating when I get to work on a dark background and tape suddenly blind.

  As for "it could cause more problems than it solved," well, the object-> unlock all followed by select-> object-> all objects of the type, and then select black? And besides, we got fined for every year back before starting the engine of revamped type doing so a few years ago. Hell, just add the ability to assign "inherit the current settings" to the accident vascular cerebral/filling of a style in the character/paragraph publishers style both would make us happy - I could type some wacky aspect I wanted, and you have your default solemn C0M0Y0K100.

• Is it possible to choose texts related frameworks that have only a fill color

  I have a script which will select blocks of text, but I came into a situation where I have to exclude any block of text that do not have a fill color. I don't see a Boolean property filled for the attributes of character or text blocks. Does anyone know if this is possible?

  That's what I used to select all text on all layers visible and unlocked. I don't see a way to exclude linked text frames that have no fillcolor.

  if (app.documents.length > 0 ) {
    var doc = app.activeDocument;
    var numTextFrames = 0;
    for (  i = 0; i < doc.textFrames.length; i++ ) {
        try {
        textArtRange = doc.textFrames[i];
        textArtRange.selected = true;
        } catch (e) {}
        }
    }

  Any help would be appreciated,

  Duane

  Here you go,

  if (app.documents.length > 0 ) {
      var doc = app.activeDocument;
      var numTextFrames = doc.textFrames.length;
      for (i=0; i		   

• Need help change fill color for checkbox to verify / unchecked

  Is it possible to change the fill color of a checkbox to a different color when someone check?

  Right now I have a check mark as X, but I was invited to see if we can also change the fill color when it is toggled checked/unchecked.

  I played with a few scripts, but nothing I tried works (and I'm super green to Javascript).

  Sure. In the event mouse to the top of a box to check, do something like:

  // Mouse Up script for check box
  if (event.target.value === "Off") {
      event.target.fillColor = color.red;
  } else {
      event.target.fillColor = color.green;
  }
  

  This can be simplified to just:

  event.target.fillColor = event.target.value === "Off" ? color.red : color.green;
  

• contour even color than the fill color

  Hi all

  This question is related to my previous post but can still be considered as indenpendant. Let's say I have a filled red square and a blue filled circle of blue. The two have no outline (or transparent contour if you wish). I want to select the two objects together and ask for illustrator to add a stroke to each of them with the same color as their own fill color, that is to say, blue for the blue and red circle for the red square. Is this possible? Thank you

  If it's the same color as the background, why do you want an overview? Add an offset path effect. In this way it is also possible to apply it to multiple objects.