my windows vista do not have to be turned off or restarted?
Since I got this computer that he would not be turned off or restarted, I have all the updates, but whenever it restarts it blocks two or three times when I turn the computer off for a weekend, then go to start it it blocks two or three times before restarting and yes I ran a few times she even lock up after one of these sessions of startup repair There are answers out there?
Hi Mike Burney,.
Welcome to Microsoft Vista answers Forum!
1. update the display driver.
2. try to start the computer in a clean boot. (before you start the computer in a clean boot, make sure that you have disabled the anti-virus)
Link for the boot: http://support.microsoft.com/kb/929135
Hope this information is useful.
Let me know if it worked.
All the best!
Thank you, and in what concerns:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Dell Inspiron 531 s / Windows Vista do not have fast internet speeds with 4G LTE Verizon
I have a Dell Inspiron 531 s running Vista. It connects to a Verizon 4 G LTE MiFi hotspot, but the speed is very slow according to speedtest.net. I connect my
Averetec 3270 / Windows XP laptop to same hotspot and get faster speeds like many, I am supposed to. Any ideas?
Hello
1 have had any changes made on the computer before the show?
2. what browser you use on the computer?
I suggest you to return the item and check if it helps:
Why is my Internet connection so slow?
http://Windows.Microsoft.com/en-us/Windows-Vista/why-is-my-Internet-connection-so-slow
See also:
Internet Explorer connection settings: recommended links
-
Event log States:
Event ID: 7036 - system - Windows Image Acquisition Service entered the suspended state
Event ID: 42 - Kernel-Power - system enters sleep
I can easily reboot to the initial page of the web/application page by moving the mouse in the same way one cancels a screensaver/development situation in hibernation. However, I'd appreciate any advice on how I can configure my PC to prevent the incident happening in the first place
Hi khaled
Thanks for your reply. I have experienced the problem at least last month. The sequence of events, as shown in the Event Viewer Log Windows for systems are the following:-
This covers the event when the Acquisition of Image Windows Service entered the suspended state
Log name: System
Source: Service Control Manager
Date: 2010-07-14 16:23:30
Event ID: 7036
Task category: no
Level: Information
Keywords: Classic
User: n/a
Computer: PC-user
Description:
The service Acquisition of Image Windows (WIA) entered the suspended state.
The event XML:
7036
0
4
0
0
0 x 80000000000000
40874
System
User-PC
Windows Image Acquisition (WIA)
paused
The next covers chronological event enters the sleep system
BODY {font: x-small "Verdana"; margin-right: 1.5em} .b .c {cursor: hand} {color: red; do-family: "Courier New"; make-weight: bold; text-decoration: No} .e {margin-left: 1em; text-indent:-1em; margin-right: 1em} Laurette {margin-left: 1em; text-indent:-1em; margin-right: 1em} .t {color: #990000} .xt {color: #990099} weather {color: red} .dt {color: green} ".m" {color: blue} .tx {police-weight: "BOLD"} .db{text-indent:0px;margin-left:1em;margin-top:0px;margin-bottom:0px;padding-left : .3em; border-left: 1px solid #CCCCCC; {fonts: small mail} .di {make: small Courier} .d {color: blue} .and {color: blue}.cb{text-indent:0px;margin-left:1em;margin-top:0px;margin-bottom:0px;padding-left:.3em;font:small Courier; color: #888888} .ci {font: small mail; color: #888888} PRE {margin: 0px; display: inline} log name: System
Source: Microsoft-Windows-Kernel-Power
Date: 2010-07-14 16:23:36
Event ID: 42
Task category: no
Level: Information
Key words: (4).
User: SYSTEM
Computer: PC-user
Description:
The system to sleep.
The event XML:
42
0
4
0
0
0 x 8000000000000004
40875
System
User-PC
4
5
After I rebooted my PC to sleep by moving the mouse, by which the PC resumes its normal operation, the following is the next chronological event reports: -.
Information on 2010-07-14 16:24:04 Dhcp - Client 1103 no log name: System
Source: Microsoft-Windows-Dhcp-Client
Date: 2010-07-14 16:24:04
Event ID: 1103
Task category: no
Level: Information
Keywords: Classic
User: n/a
Computer: PC-user
Description:
Your computer has been awarded with success a the network address, and it can now connect to other computers.
The event XML:
1103
0
4
0
0
0 x 80000000000000
40876
System
User-PC
Information on 2010-07-14 16:24:07 Service Control Manager Eventlog Provider 7036 NoneLog name: System
Source: Service Control Manager
Date: 2010-07-14 16:24:07
Event ID: 7036
Task category: no
Level: Information
Keywords: Classic
User: n/a
Computer: PC-user
Description:
The service Acquisition of Image Windows (WIA) entered in the executing State.
The event XML:
Log name: System
7036
0
4
0
0
0 x 80000000000000
40877
System
User-PC
Windows Image Acquisition (WIA)
running
Source: Tcpip
Date: 2010-07-14 16:24:04
Event ID: 4201
Task category: no
Level: Information
Keywords: Classic
User: n/a
Computer: PC-user
Description:
The system has detected that the network connection to the Local network adapter is connected to the network and launched a normal operation.
The event XML:
4201
4
0
0 x 80000000000000
40879
System
User-PC
Connection to the local network
0000000002002C 000000000069100040020000000000000000000000000000000000000000000000
Updates Windows informs me that my display driver for NVIDIA GEFORCE is up-to-date. The only other point may be worth mentioning is that I changed my screen resolution of 1024 x 768 and often but not always after I restarted, the system automatically back to the default display of 32-bit resolution namely 1280 x 1024. I left at this setting for now.
Look forward to your additional comments
Thanks and greetings
-
I do a lot of important writing, and it would be so much nicer if the icons of file would be left in the same positions on the desktop, so that when I started working I don't panic, thinking that some kind an important file has been lost. Please help me understand how to set up my office to keep my icons in place, if possible. Thank you!
Make sure the settings are as the other poster said.
This could happen if the Explorer doesn't correctly. The positions of icons are saved at the stop.
As an experience shutdown shut down Windows Explorer.
- Create and position a file on the desktop.
- Close Windows Explorer
- Start - All Programs - Accessories - right on command prompt and choose run as administrator.
- Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
- Press Ctrl + Alt + Delete then Task Manager.
- Control all processes to explore are closed. On the process tab see if Explorer is displayed.
Then to restart Explorer- Press Ctrl + Alt + Delete and choose Task Manager
- In the Task Manager, click the file menu and then click new task (run) and enter explorer
Is your file in the correct position?
General Explorer Fixs
To see if a fix is available
In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.
You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.
If the problem affects the control panel press Windows key + R and type wercon.
Close the browser and start a command prompt- Close Windows Explorer
- Start - All Programs - Accessories - right on command prompt and choose run as administrator.
- Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
- Press Ctrl + Alt + Delete then Task Manager.
- Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
Then to restart the Explorer after trying all of the following- Press Ctrl + Alt + Delete and choose Task Manager
- In the Task Manager, click the file menu and then click new task (run) and enter explorer
Reregister the shell registry entriesClose the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).regsvr32 /i shell32regsvr32 /i urlmon.dllregsvr32 RPCRT4.dll
regsvr32 PROPSYS.dll
regsvr32 MSCTF.dll
regsvr32 cscui.dll
regsvr32 rsaenh.dll
regsvr32 timedate.cpl
regsvr32 ATL DLL
regsvr32 OLEACC.dll
regsvr32 actxprxy.dll
regsvr32 USERENV.dll
regsvr32 msshsq.dll
regsvr32 NaturalLanguage6.dll
regsvr32 thumbcache.dll
regsvr32 WINTRUST.dll
regsvr32 MMDevAPI.DLL
regsvr32 audioses.dll
regsvr32 audioeng.dll
regsvr32 ExplorerFrame.dll
regsvr32 msi.dll
regsvr32 FirewallAPI.dll
regsvr32 netshell.dll
regsvr32 pnidui.dll
regsvr32 QUtil.dll
regsvr32 c:\windows\system32\wpdshserviceobj.dll
regsvr32 WINHTTP.dll
regsvr32 C:\windows\system32\qagent.dll
regsvr32 C:\windows\system32\portabledeviceapi.dll
regsvr32 wbemprox.dll
regsvr32 wbemsvc.dll
regsvr32 fastprox.dll
regsvr32 imapi2.dll
regsvr32 wshext.dll
regsvr32 gameux.dll
regsvr32 msxml6.dllregsvr32 vbscript.dll
regsvr32 jscript.dllregsvr32 wshext.dllregsvr32 wshom.ocxregsvr32 wshcon.dllregsvr32 scrrun.dllDelete folder settingsClose the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /fReg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /fReg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /fDelete the thumbnail and icon CachesClose the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).del "% userprofile%\AppData\Local\IconCache.db".del "% userprofile%\AppData\Local\*.db".A boot is a way to exploreIt can be caused by a shell extension.
The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.- Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
- Close Windows Explorer
- Start Autoruns by right-clicking and choose run as administrator
- Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
- Go to the Explorer tab and uncheck everything to the left.
- Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
- Press Ctrl + Alt + Delete and choose Task Manager.
- Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
- Click the file menu and then click new task (run) and enter explorer
and if it helps, re-enable one by one to identify the who.
-
How can I re - install Windows Vista if I have not all discs?
Vista OEM on hard drive
I have a LG E00, which came with Windows Vista pre-installed on it, but didn't come with disks. What happened is that I got a virus in my computer and I'll have to format the HD, how can I re - install Windows Vista, if I have not all discs?Hello, Icemen_O2828,
LG E00 does not ring the bells in the computer world. Are you sure it's okay?
Support - LG LX120 is the only listed netbook
When you contact LG application - minimal cost from $16-$20 recovery disks
http://www.LG.com/us/computer-products/netbooks/LG-LGX120.jsp
-
Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7
Try to force the lightroom Installer to run in Windows 7 mode:
Right-click on the Setup file and select Properties option.
Then click on the Compatibility tab.
The value of the Windows 7 operating system and check.
-
I just bought Photoshop Lightroom - I have Windows 7 system with service pack 1, but I get an error trying to install that "windows vista is not supported. I'm not able to install - how to spend it?
See link below:
-
I want to install lightroom 6. I have Windows 7, but I get a message that Windows Vista is not allowed.
Hello
You can check out the link below.
Hope this will help you.
Kind regards
Hervé Khare
-
Try to install LR6 but says it is not support windows vista. I have windows 7.
I install LR6. After entering the serial number it won't allow me to install it says doen't support Windows Vista. I have Windows 7.
Change the compatibility mode of Windows 7 configuration file and run the Setup file and check.
Right-click on the Setup file and select Properties option.
Then click on the Compatibility tab.
The value of the Windows 7 operating system and check.
~ Mohit
-
Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s
Hello
I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.
Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.
Hello
The CD/DVD drive needs no special drivers!
Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)Simply said, the Vista should recognize the drive without any problems.
A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?
There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
It of necessary to update the registry entry
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}1. click on the start menu.
2. If it is a Vista machine in the search box type regedit without quotes.
3. look for the registry key mentioned above.
4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
5. restart Windows.
6 let me know if it works. -
original title: Halo 2 for windows vista
Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer. It will not work in single user either...
Hello
Plase make sure you have the latest version of the GFWL Client installed:
http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx
-
I have my computer to another, here my specs:
Intel Core 2 DuoHard drive 500 GB2 GB OF RAMDVD playerFloppy DiskThe operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?Hello
1 did you change on your computer before this problem?
2. What is the blue stop screen error message?
3. When you receive a blue screen during the upgrade?
You can follow the suggestions and then check.
Method 1
Disconnect external devices connected to the computer?
Method 2
You can read the article and then check.
Upgrade Windows XP to Windows 7
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7
See also:
Windows 7 Upgrade and Migration Guide
http://TechNet.Microsoft.com/en-us/library/dd446674 (v = ws.10) .aspx
-
My update of Windows media player in windows vista does not play a mkv file.
* Original title: about file mkv
My update of Windows media player in windows vista does not play a mkv file, what do I do
There are solutions out there, depends on how much you trust the software that you download. Here is an example for Windows 8, could work for vista too - make sure you have a full backup and AV before you start :)
-
Windows Vista does not start upward, with success since the closure complete
Hello world
I actually had this problem for a long time, but I'm just now to a point where I'm ready to take a lead in fixing it.
I can't identify when it started, but Windows Vista does not start upward, with success of a full stop. He gets to the screen where, in general, the green bars will travel across the screen, but the green bars will not come. The screen looks dim and sits there, with the text of the copyright of Microsoft Corporation. So, after not having on the mound, I have to manually shut down the computer by holding down the power button. When I try to start again, told me to go through the Startup Repair tool. If I jump the repair, I just have to meet the same problem - a computer that will not go beyond the screen "green bar".
So, I do the Startup Repair, and told me what I do for the restoration of the system. Windows starts normally after the restoration.
Don't forget, this happens from a full stop. To remedy this, I just never completely shut down my computer. I left running and back just at the beginning of the day. The computer may start restart, it just may not start with a full stop.
Given the start of repair takes, literally, around 4 or 5 hours of full stops complete, accidental or power outages are a nightmare, I am obliged to wait 5 hours to get access to the computer. Fortunately, I have my laptop.
If someone has encountered this? I saw people talking about the loop of startup repair, but that's not the point, I have. I have yet to see any discussion of my specific problem.
Thanks in advance!
Hello
4-5 hours to do a startup repair is too long.
Often you get better results if you a using a DVD of Microsoft Vista startup repair.
Jose how to do a startup repair, etc. using a DVD of Vista from Microsoft
Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.
Here is the guide to repair Options using a Vista DVD from Microsoft.
If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.
http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/
Table of contents
- Overview of Windows Vista repair options
- How to perform an automatic repair of Windows Vista using Startup Repair
- Advanced Tools Overview
- Conclusion
If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.
Unfortunately, you have to buy it.
Here is a link to it:
http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/
See you soon.
-
Get the error, Version of Windows Vista is not authentic
I got this hp pavilion dv6000 from the trash, I would get it works fine, but I get a message telling me that this version of windows vista is not genuine... What do I do?
Original title: dumpster find
If she has a certificate of ahtenticity (COA) for windows on the back, install the correct version of windows appearing on the certificate of authenticity,
You may have to contact HP for the disc
Maybe you are looking for
-
In the control panel my computer windows 7 tells me that I 17.0.5 and installed two thunderbird 17.0.4in respect of aid 'about tuberculosis', he says I'm under 24.6.0 and I'm updating.I'm confused. Tried to uninstall the 17.0.4 program and then tuber
-
How to remove several bookmarks in FF 10.0.1?
For some reason, I see multiple copies of bookmarks for the same site, and lately, they seem to multiply like rabbits . Is there a way to select all duplicates and delete in one go? Thank you!
-
Why the 'Back' button often fails for the first time after moving to a new page to work?
During further testing, I can repeat this bug every time: it happens when I clicked on a page background (focus it and allow scrolling arrow key). After having done this, clicking on the back button does not work as expected: don't not visually get "
-
Can someone help me, I know that whenever something requires money, it must be some kind of virus, but I can't get around it. I scanned it with anitvirus, spyware etc and have had no luck
-
Establishment of company directors - acceptance of contract pending
I named 3 associated users are administrators of company with the SECURITY tool. Each user's State is "Pending agreement acceptance", but none of the users received an email of acceptance. We have allowed a week for it to be received, removed and r